Front of the system with the faceplate attached. Visible underneath it is the HP 9000 D380.
Full front of the system with the Netra logo visible.
The top of the system, with the Sun logo visible.
The front of the system with the plastic cover removed.
The front of the system with the metal drive covers removed. The covers can be seen sitting on top of the system. The HP 9000 is visible under the system.
The system with the drives removed.
Two SCA SCSI drives in Sun disk trays. The metal covers that go over the holes in the front of the case are visible to the left.
A picture of the sticker on the inside of the top cover.
Another picture of the sticker on the inside of the top cover.
A top-down picture of the system with the cover removed.
The systems motherboard. The PCI slot (black thing sticking up on the top left) is visible, along with the CPU and RAM. The black thing on the left of the CPU is to hold in long PCI cards.
The card reader can be seen on the left, with the CD-ROM drive under it.
The drive bays can be seen, with no drives installed.
The drive bays can be seen with a drive installed in each.
A picture of the power supply, with RAM also visible.
The back of the system. Visible from left to right is: Power connector, standby switch, two fans, serial ports A (also lights out management port) and B, Ethernet ports 0 and 1, Link LEDs, USB ports, LVDSE SCSI, Fault LED and Power LED.