DIGITAL KAP for C for_DIGITAL_UNIX______________________________ Installation Guide Order Number: AA-PXEEH-TE December 1997 This document contains instructions for installing DIGITAL KAP for C on DIGITAL UNIX systems. Revision/Update Information: This is a revised document. Operating System and Version: DIGITAL UNIX, Versions 3.2, 4.0B, 4.0C, and 4.0D Software Version: DIGITAL KAP for C, Version 3.2 Digital Equipment Corporation Maynard, Massachusetts __________________________________________________________ First Printing, March 1993 Revised, December 1997 Possession, use, or copying of the software described in this publication is authorized only pursuant to a valid written license from DIGITAL or an authorized sublicensor. Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description. © Digital Equipment Corporation 1993, 1995, 1996, 1997. All rights reserved. © Kuck & Associates, Inc. 1993, 1995, 1996, 1997. All rights reserved. The following are trademarks of Digital Equipment Corporation: AlphaGeneration, DEC Fortran, DECdocument, DECsupport, DECthreads, DIGITAL, VAX DOCUMENT, and the DIGITAL logo. The following are third-party trademarks: KAP is a trademark of Kuck & Associates, Inc. POSIX is a registered trademark of IEEE. UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Ltd. All other trademarks and registered trademarks are the property of their respective holders. This document is available on CD-ROM. This document was prepared using VAX DOCUMENT Version 2.1. ________________________________________________________________ Contents Preface.................................................. v 1 Preparing to Install DIGITAL KAP for C 1.1 Registering the License...................... 1-1 1.2 Checking the Media Software Distribution Kit.......................................... 1-2 1.3 Understanding Installation Procedure Requirements................................. 1-2 1.3.1 Login Privileges......................... 1-2 1.3.2 Hardware Requirements.................... 1-3 1.3.3 Software Requirements.................... 1-3 1.3.3.1 Parallel Libraries Identical for all DIGITAL KAP Products................... 1-4 1.3.4 Disk Space Requirements.................. 1-4 1.4 Backing Up Your System Disk.................. 1-6 1.5 Stopping the Installation.................... 1-7 1.6 Recovering from Errors....................... 1-7 2 Installing DIGITAL KAP for C 2.1 Installing DIGITAL KAP for C................. 2-1 2.1.1 Starting the Installation Procedure...... 2-1 2.1.2 Responding to Installation Procedure Prompts.................................. 2-2 2.1.2.1 Loading KPC Kit........................ 2-2 2.1.2.2 Monitoring Displays During the Subset Loading Process........................ 2-2 iii 3 Completing the Installation 3.1 Building Applications with the DECthreads Archive Library on DIGITAL UNIX Version 4.0D......................................... 3-1 A Files Installed on Your System B Sample Installation Index Tables 1-1 KAP Version 3.2 Parallel Processing Libraries................................ 1-4 1-2 KAP Subset Sizes with DIGITAL UNIX....... 1-5 A-1 Installed DIGITAL KAP for C Files........ A-1 iv ________________________________________________________________ Preface This manual describes how to install DIGITAL KAP for C on processors running the DIGITAL UNIX operating system. For information about the compatibility of other software products with this version of KAP, refer to the Software Product Description (SPD). You can use the SPD to verify which versions of your operating system are compatible with this version of KAP. The name of the DEC OSF/1 AXP operating system has been changed to DIGITAL UNIX. All references to DEC OSF/1 AXP refer to the DIGITAL UNIX operating system. Intended Audience This manual is intended for a system manager who installs DIGITAL KAP for C on a DIGITAL UNIX system. Structure of This Document This manual includes three chapters and two appendixes: o Chapter 1 describes the operating system and hardware requirements for a DIGITAL KAP for C installation and related procedures that you complete before installing this software. o Chapter 2 describes the DIGITAL KAP for C installation procedure. o Chapter 3 describes the Installation Verification Procedure (IVP) and any postinstallation procedures that you must complete to use DIGITAL KAP for C. o Appendix A describes the hierarchy and contents of DIGITAL KAP for C directories. v o Appendix B contains a log for a DIGITAL KAP for C installation. Associated Documents Please read the cover letter and release notes before installing the software, in case important information missing from this document has been added to these documents. The documentation for DIGITAL KAP for C also includes the following manuals: o DIGITAL KAP for C for DIGITAL UNIX User Guide o DIGITAL KAP for C for DIGITAL UNIX Quick Reference o DIGITAL KAP for C for DIGITAL UNIX Cover Letter For general information about installing software, refer to the following manual: o Guide to Installing DEC OSF/1 Alpha (DIGITAL UNIX Version 3.2) o DIGITAL UNIX Installation Guide (DIGITAL UNIX Version 4.0 and above) Conventions The following conventions are used in this guide: __________________________________________________________ Convention_______Description______________________________ UPPERCASE and The DIGITAL UNIX system differentiates lowercase between lowercase and uppercase characters. Literal strings that appear in text, examples, syntax descriptions, and function descriptions must be typed exactly as shown. user input This bold typeface is used in interactive examples to indicate typed user input. # A number sign is the default superuser _________________prompt.__________________________________ vi 1 ________________________________________________________________ Preparing to Install DIGITAL KAP for C This chapter describes the preparations and requirements for installing DIGITAL KAP for C on DIGITAL UNIX. Your bill of materials (BOM) and indented bills report (BIL) specify the contents of your kit. If your kit is damaged or if you find that parts of it are missing, contact your DIGITAL representative. Before starting the installation procedure described in Chapter 2, complete the preparations outlined in this chapter. You need to know about installation options and information related to the installation procedure. 1.1 Registering the License The DIGITAL KAP for C software supports the DIGITAL UNIX License Management Facility (LMF). A License Product Authorization Key (License PAK) must be registered in the License Database (LDB) to use KAP for C. The License PAK may be shipped along with the kit if you ordered the license and media together; otherwise, it is shipped separately to a location based on your license order. To register a license under DIGITAL UNIX, first log in as superuser. You can then perform the PAK registration in either of these two ways: 1. If you have the license PAK on paper, enter the following commands at the superuser prompt: # /usr/sbin/lmf register o This register command brings you into edit (vi) mode. Preparing to Install DIGITAL KAP for C 1-1 o Using regular vi edit commands, enter all the information on your License PAK. If you are not familiar with vi, please see the vi reference page (> man vi). o Exit the vi editor. # /usr/sbin/lmf reset o This reset command copies the license information from the LDB to the dynamic kernel LMF database. # exit 2. If you have the license PAK in the form of a csh command script (in PAK_file), enter the following commands at the superuser prompt: # /usr/sbin/lmf register - < PAK_file # exit For complete information about using the DIGITAL UNIX LMF, see the DEC OSF/1 AXP Version 1.3 Guide to Software Licensing (DIGITAL UNIX Version 3.2) or DIGITAL UNIX Software License Management (DIGITAL UNIX Version 4.0 and above) or the lmf(8) reference page. 1.2 Checking the Media Software Distribution Kit The kit includes a CD-ROM optical disk. 1.3 Understanding Installation Procedure Requirements Installing DIGITAL KAP for C and the DIGITAL KAP for C reference pages, and running the Installation Verification Procedure (IVP) on a standalone system takes about 2 minutes. 1.3.1 Login Privileges You must be able to log in as superuser on the system where you are installing DIGITAL KAP for C. Only when you are logged in as superuser do you have sufficient privileges to install the DIGITAL KAP for C software. 1-2 Preparing to Install DIGITAL KAP for C 1.3.2 Hardware Requirements For a complete list of supported processors, see the SPD. Installing DIGITAL KAP for C requires at least 8.0 megabytes of storage space on your system. To perform the installation, you need the following hardware: o Software distribution device (if installing from media) A CD-ROM software kit. The documentation for the CD-ROM drive that you are using explains how to load media. o Terminal You can use either a hardcopy or video terminal to communicate with the operating system and respond to prompts from the installation procedure for DIGITAL KAP for C. 1.3.3 Software Requirements You must install the following software before you install DIGITAL KAP for C, Version 3.2, for DIGITAL UNIX: o DEC OSF/1 Alpha Base System The required subset is OSFBASExxx, which is named "Base System." o OSFMANOPxxx, which is named "On Line Manual Pages." o OSFDCMTxxx, which is named "Document Preparation Software." o CMPDEVENH subset (Development Enhancements for DIGITAL UNIX) from the DIGITAL UNIX 4.0D operating system CD- ROM. This subset is required only if you are using DIGITAL UNIX 4.0D and you want to use the -non_shared linker switch to link your application to the DECthreads archive library. When you have installed the previous software, you can install the DIGITAL KAP for C software, which consists of the KPCBASE320 subset. Preparing to Install DIGITAL KAP for C 1-3 The SPD contains a complete list of prerequisite software and required version numbers. 1.3.3.1 Parallel Libraries Identical for all DIGITAL KAP Products Version 3.2 of KAP for DEC Fortran, KAP Fortran 90, and KAP for C use the same parallel libraries. If you use different languages within a parallelized program, you should use Version 3.2 of all the KAP products. Table 1-1 shows the DIGITAL KAP Version 3.2 parallel libraries. Use the what command to determine the versions of some parallel libraries, for example: For the DIGITAL UNIX Version 4.* library, libkmp_ osfp10.a: what /usr/lib/libkmp_osfp10.a This command returns the DIGITAL KAP version: Version BL30_1.2_posix10 Table_1-1_KAP_Version_3.2_Parallel_Processing_Libraries___ Library_________________________KAP_Version_Number________ DIGITAL_UNIX_Version_3.2__________________________________ libkmp_osf.a BL30_1.2_posix6 __________________________________________________________ DIGITAL_UNIX_Version_4.0B_-_4.0D__________________________ libkmp_osfp10.a BL30_1.2_posix10 libpthread.so___________________UNIX_4.0B_-_4.0D__________ 1.3.4 Disk Space Requirements The disk space requirements discussed in this section apply to the disks where you load the KAP for C subset. Table 1-2 lists the disk space requirements for loading KAP for C software subsets for DIGITAL UNIX systems. 1-4 Preparing to Install DIGITAL KAP for C Table_1-2_KAP_Subset_Sizes_with_DIGITAL_UNIX______________ Subset_Name____/usr/opt_______/usr/bin___usr/man/man1_____ KPCBASE320_____8_MB___________50_bytes___50_bytes_________ The KAP for C installation procedure loads files into the following directories: /usr/opt /usr/bin /usr/man/man1 /usr/lib /usr/include Compare the space required for subsets with the free space currently on the disks where KAP for C files will reside. To determine the current amount of free space for a directory path, log in to the system where you plan to install KAP for C. You can check which file systems are mounted and where they are by displaying the file /etc /fstab. For example: # more /etc/fstab /dev/rz0a / ufs rw 1 1 /dev/rz0g /usr ufs rw 1 2 /dev/rz0b swap1 ufs rw 0 2 /dev/rz1c swap2 ufs sw 0 2 /dev/rz0f /usr/users ufs rw 1 2 The previous display indicates that /usr (mounted to /dev /rz0g ) is the only mount point that affects where KAP for C files will reside; the system has only one local disk drive and the /usr/opt file system resides in the g partition of the disk on that drive. Enter the df command to determine total space and free space for the one or two file systems where KAP for C files will reside. Based on the previous display of the /etc/fstab file, which shows that only /usr is a mount point, you would only need to inspect free space in the /usr file system: Preparing to Install DIGITAL KAP for C 1-5 # df /usr Filesystem Total blks blks % node 512-blks used free used Mounted on /dev/rz0g 793406 624892 89172 88% /usr The previous display indicates that there are 89172 blocks (512 bytes per block) free. This free space accommodates the subset requirements listed in Table 1-2 for the /usr /opt file system. On systems where /usr/opt is mounted to different devices from /usr, enter the following command: # df /usr/opt In this case, you compare space required for DIGITAL KAP for C files in /usr/lib to the free space displayed in the output list. If you find that there is insufficient disk space for the DIGITAL KAP for C subsets, and know that you have additional space on alternative disks or disk partitions for your system, you can take the following steps before installing DIGITAL KAP for C: 1. Log in as superuser. 2. Specify in the /etc/fstab file that one or more of the newly created directories are mount points to new disk partitions where there is additional space. 3. Enter the mount -a command so that the new mount points take effect. 1.4 Backing Up Your System Disk DIGITAL recommends that you back up your system disk before installing any software. Use the backup procedures established at your site. For details about performing a system disk backup, see your DIGITAL UNIX documentation. 1-6 Preparing to Install DIGITAL KAP for C 1.5 Stopping the Installation You can stop the installation procedure at any time by pressing Ctrl/C. However, files created up to that point are not deleted. You must delete these files interactively. Appendix A lists the files and directories created during the installation procedure. 1.6 Recovering from Errors If errors occur during the installation, the system displays failure messages. If the installation fails due to insufficient disk space, the installation procedure displays the following message: There is not enough file system space for subset KPCBASE320. KPCBASE320 will not be loaded. If any of the following conditions exist, errors can occur during the installation: o The operating system version is incorrect. o The prerequisite software version is incorrect. o The system parameter values for successful installation are insufficient. For descriptions of error messages generated by these conditions, see the DIGITAL UNIX documentation on system messages, recovery procedures, and DIGITAL UNIX software installation. If you are notified that any of these conditions exist, take the appropriate action described in the message. For information about software requirements, see Section 1.3.3. Preparing to Install DIGITAL KAP for C 1-7 2 ________________________________________________________________ Installing DIGITAL KAP for C This chapter describes the procedures for installing DIGITAL KAP for C on a DIGITAL UNIX system. 2.1 Installing DIGITAL KAP for C This section explains how to start a local installation procedure directly from the CD-ROM and how to respond to installation procedure prompts. 2.1.1 Starting the Installation Procedure Start the DIGITAL KAP installation procedure from CD-ROM as follows: 1. Mount the media on the appropriate drive. 2. Log in as superuser (the login name is root) to the system where you are installing DIGITAL KAP for C. 3. Make sure that you are at the root (/) directory by entering the following command: # cd / 4. Specify the /mnt directory to be the mount point for the distribution file system on the drive. If your CD-ROM drive is rz4, enter the following command: # mount /dev/rz4 /mnt 5. Enter a setld command that requests the load function and identifies the directory in the mounted file system where DIGITAL KAP for C subsets are located. For DIGITAL UNIX, the directory location for the DIGITAL KAP subsets is /mnt/kpc320. For example, if you load DIGITAL KAP for C subsets onto a DIGITAL UNIX system, enter the following command: Installing DIGITAL KAP for C 2-1 # /usr/sbin/setld -l /mnt/kpc320/kit KPCBASE320 2.1.2 Responding to Installation Procedure Prompts This section explains the installation procedure prompts and displays. 2.1.2.1 Loading KPC Kit After you enter the setld command, the installation procedure displays the following message: Checking file system space required to install specified subsets: When the file system space checks okay, the KPC kit begins loading. 2.1.2.2 Monitoring Displays During the Subset Loading Process After the kit is loaded, the procedure displays a series of messages, as follows: Product Name: KAP-C Producer: KUCK Version: 3.2 Issuer: DEC The Product Authorization Key (PAK) must be registered with the LICENSE MANAGEMENT FACILITY. Next, you are asked if the PAK is registered. Enter y if your PAK is registered. Is the PAK registered and loaded? [y/n] y Then, the IVP will run automatically. The IVP checks to ensure that the installation is successful. If the DIGITAL KAP subset is properly installed, then the IVP displays the following message: *-------------------------------------------* * Installation Verification Procedure * * KAP for C 3.2 k010502 970918 * *-------------------------------------------* KAP passes Optimization Compilation test KAP Object Execution Test Passed ****** Installation Verification Procedure SUCCESSFUL ****** 2-2 Installing DIGITAL KAP for C If you encounter errors during the installation, see the Diagnostics section of the setld(8) reference page for an explanation of the error and the appropriate action to take. If the verification process fails, you can look in the file /usr/var/adm/fverify to find information that can help you diagnose the problem. After you correct the installation problem, you should use the command /usr/sbin/setld -d KPCBASE320 to delete the DIGITAL KAP subset before you reinstall the product. Chapter 3 discusses the postinstallation tasks. Installing DIGITAL KAP for C 2-3 3 ________________________________________________________________ Completing the Installation At any time after installing DIGITAL KAP for C, you can run the Installation Verification Procedure (IVP) to verify that the software is available on your system. You may also want to run the IVP after a system failure to be sure that users can access DIGITAL KAP for C. To run the IVP after an installation, enter the following command: # /usr/sbin/setld -v KPCBASE320 When the IVP runs successfully, the system displays the following: *-------------------------------------------* * Installation Verification Procedure * * KAP for C 3.2 k010502 970918 * *-------------------------------------------* KAP passes Optimization Compilation test KAP Object Execution Test Passed ****** Installation Verification Procedure SUCCESSFUL ****** 3.1 Building Applications with the DECthreads Archive Library on DIGITAL UNIX Version 4.0D Although DIGITAL recommends that you use the DIGITAL UNIX DECthreads shared library default, you can link an image to the DECthreads archive library libpthread.a, by using the -non_shared linker switch: o DIGITAL UNIX Version 4.0D: Completing the Installation 3-1 You should have installed the CMPDEVENH subset (Development Enhancements for DIGITAL UNIX) from the DIGITAL UNIX 4.* operating system CD-ROM. The DECthreads archive library is at the following location: /usr/opt/alt/user/lib/threads/libpthread.a To link to libpthread.a when you are building a parallel program, use the following command: kcc ckapargs='-conc' -non_shared \ /usr/opt/alt/usr/lib/threads/libpthread.a myprog.c 3-2 Completing the Installation A ________________________________________________________________ Files Installed on Your System Table A-1 lists the files on your system after you install DIGITAL KAP. Table_A-1_Installed_DIGITAL_KAP_for_C_Files_____________________ Directory___________File________________Description_____________ /usr/opt KPC320_release_ Release notes in text /KPCBASE320 note.txt /usr/opt ivp.csh IVP C-shell /KPCBASE320 /usr/opt kapc KAP-C binary /KPCBASE320 /usr/opt kapc.1 KAP-C reference pages /KPCBASE320 /usr/opt kapcivpin.c IVP C source file /KPCBASE320 /usr/opt kapcivpin.kmp IVP file /KPCBASE320 /usr/opt kapcivpver.lis IVP KAP version /KPCBASE320 /usr/opt kapio.alphaosf.h Stdio header file /KPCBASE320 /usr/opt kapio.internal.h Stdio header file /KPCBASE320 /usr/opt kcc KAP-C driver binary /KPCBASE320 /usr/opt kcc.1 KAP-C driver reference /KPCBASE320 pages /usr/opt libkio.a KAP stdio library /KPCBASE320 (continued on next page) Files Installed on Your System A-1 Table_A-1_(Cont.)_Installed_DIGITAL_KAP_for_C_Files_____________ Directory___________File________________Description_____________ /usr/opt libkmp_osf.a DIGITAL UNIX V3.2, POSIX /KPCBASE320 1003.4a/d4-compliant, parallel run-time library /usr/opt libkmp_osfp10.a DIGITAL UNIX V4.0, POSIX /KPCBASE320 1003.1c-compliant, parallel run-time library /usr/bin kapc Links /usr/bin kcc Links /usr/man/man1 kapc.1 Links /usr/man/man1 kcc.1 Links /usr/lib libkio.a Links /usr/lib libkmp_osf.a Links /usr/lib libkmp_osfp10.a Links /usr/include/kap kapio.alphaosf.h Links /usr/include/kap____kapio.internal.h____Links___________________ A-2 Files Installed on Your System B ________________________________________________________________ Sample Installation This appendix contains a log of a complete installation of the DIGITAL KAP for C Kit. Your installation may differ from this example because you can make different choices during the procedure. # /usr/sbin/setld -l /mnt/kpc320/kit KPCBASE320 Checking file system space required to install specified subsets: File system space checked OK. The installation of KPCBASE320 takes approximately 2 to 4 minutes, depending on your type of media and your system configuration. Begin Loading KPC kit for KAP Copyright (c) Kuck and Associates, Inc. 1995,1997. All rights reserved. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III., as applicable. This software is proprietary to and embodies the confidential technology of Kuck and Associates. Possession, use, or copying of this software and media is authorized only pursuant to a valid written license from Digital or an authorized sublicensor. KAP for Digital UNIX C Optimizer Copying from /users/joe/kapckit (disk) Verifying Configuring "KAP for Digital UNIX C Optimizer" (KPCBASE320) This product is REGISTERED LICENSED SOFTWARE. Sample Installation B-1 Product: KAP-C Producer: KUCK Version: 3.2 Issuer: DEC The Product Authorization Key (PAK) must be registered with the LICENSE MANAGEMENT FACILITY. Is the PAK registered and loaded?[y/n] y Copyright (c) Kuck and Associates, Inc. 1995,1997. All rights reserved. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of DFARS 252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III., as applicable. This software is proprietary to and embodies the confidential technology of Kuck and Associates. Possession, use, or copying of this software and media is authorized only pursuant to a valid written license from Digital or an authorized sublicensor. *-------------------------------------------* * Installation Verification Procedure * * KAP for C 3.2 k010502 970918 * *-------------------------------------------* KAP passes Optimization Compilation test KAP Object Execution Test Passed ****** Installation Verification Procedure SUCCESSFUL ****** B-2 Sample Installation ________________________________________________________________ Index A__________________________ I__________________________ Archive DECthreads library Installation building applications sample, B-1 with, 3-1 stopping the, 1-7 Associated documents, vi storage, 1-3 Installation procedure, B__________________________ 2-1 Backing up your system, IVP, 3-1 1-6 L__________________________ C__________________________ libpthread.a, 3-1 Conventions, vi License Management Facility (LMF), 1-1 D__________________________ Disk space requirements, P__________________________ 1-4 Parallel libraries, 1-4 increasing, 1-6 Privileges checking login, 1-2 E__________________________ S Error recovery, 1-7 ___________________________ Software requirements, 1-3 H Stopping installation, 1-7 ___________________________ Storage required for Hardware installation, 1-3 required for installation , 1-3 Index-1