HP OpenVMS Utility Routines Manual


Previous Contents Index


MAIL$MESSAGE_MODIFY

Modifies information in the message header.

Format

MAIL$MESSAGE_MODIFY context ,in_item_list ,out_item_list


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value

Longword condition value. All utility routines return a condition value in R0. Condition values that can be returned by this routine are listed under Condition Values Returned.


Arguments

context


OpenVMS usage: context
type: longword (unsigned)
access: modify
mechanism: by reference

Message context information to be passed to message routines. The context argument is the address of a longword that contains message context information returned by MAIL$MESSAGE_BEGIN.

in_item_list


OpenVMS usage: itmlst_3
type: longword (unsigned)
access: read only
mechanism: by reference

Item list specifying options for the routine. The in_item_list argument is the address of a list of item descriptors, each of which specifies an option and provides the information needed to perform the operation.

The item list is terminated by longword value of 0.


Input Item Codes

MAIL$_MESSAGE_BACK

When you specify the Boolean item code MAIL$_MESSAGE_BACK, MAIL$MESSAGE_MODIFY reads the identification number of the specified message in order to return the first record in the preceding message.

Specify the value 0 in the buffer length and buffer address fields of the item descriptor.

Do not specify the item codes MAIL$_MESSAGE_BACK, MAIL$_MESSAGE_ID, and MAIL$_MESSAGE_NEXT in the same call to MAIL$MESSAGE_MODIFY.

MAIL$_MESSAGE_FLAGS

MAIL$_MESSAGE_FLAGS specifies system flags for new mail. The buffer address field of the item descriptor points to a word that contains bit mask offsets. The following offsets can be used to modify the 2-byte bit mask:

MAIL$_MESSAGE_ID

MAIL$_MESSAGE_ID specifies the message identification number of the message on which an operation is to be performed. The buffer address field of the item descriptor points to a longword that contains the message identification number.

Do not specify the item codes MAIL$_MESSAGE_BACK, MAIL$_MESSAGE_ID, and MAIL$_MESSAGE_NEXT in the same call to MAIL$MESSAGE_MODIFY.

MAIL$_MESSAGE_NEXT

When you specify the Boolean item code MAIL$_MESSAGE_NEXT, MAIL$MESSAGE_MODIFY reads the message identification number of a message and returns the first record in the message following the current message.

Specify the value 0 in the buffer length and buffer address fields of the item descriptor.

Do not specify the item codes MAIL$_MESSAGE_BACK, MAIL$_MESSAGE_ID, and MAIL$_MESSAGE_NEXT in the same call to MAIL$MESSAGE_MODIFY.

out_item_list


OpenVMS usage: itmlst_3
type: longword
access: write only
mechanism: by reference

Item list specifying the information you want the routine to return. The out_item_list argument is the address of a list of item descriptors, each of which describes an item of information. The list of item descriptors is terminated by longword value of 0.

Output Item Code

MAIL$_MESSAGE_CURRENT_ID

When you specify MAIL$_MESSAGE_CURRENT_ID, MAIL$MESSAGE_MODIFY returns the message identification number of the current message. The buffer address field of the item descriptor points to a longword that receives the message identification number.

Condition Values Returned

MAIL$_CONITMCOD The specified item codes define conflicting operations.
MAIL$_DELMSG The message is deleted.
MAIL$_ILLCTXADR The context block address is illegal.
MAIL$_INVITMCOD The specified item code is invalid.
MAIL$_INVITMLEN The specified item length is invalid.
MAIL$_MISREQITEM The required item is missing.
MAIL$_NOFILEOPEN The mail file is not open.
MAIL$_NOMOREMSG No more messages.
MAIL$_WRONGCTX The context block is incorrect.
MAIL$_WRONGFILE The specified file is incorrect in this context.
SS$_ACCVIO Access violation.
Any condition value returned by $FIND and $UPDATE.

MAIL$MESSAGE_SELECT

Selects a message or messages from the currently open mail file. Before you attempt to read a message, you must select it.

Format

MAIL$MESSAGE_SELECT context ,in_item_list ,out_item_list


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value

Longword condition value. All utility routines return a condition value in R0. Condition values that can be returned by this routine are listed under Condition Values Returned.


Arguments

context


OpenVMS usage: context
type: longword (unsigned)
access: modify
mechanism: by reference

Message context information to be passed to message routines. The context argument is the address of a longword that contains message context information returned by MAIL$MESSAGE_BEGIN.

in_item_list


OpenVMS usage: itmlst_3
type: longword (unsigned)
access: read only
mechanism: by reference

Item list specifying options for the routine. The in_item_list argument is the address of a list of item descriptors, each of which specifies an option and provides the information needed to perform the operation.

The item list is terminated by longword value of 0.


Input Item Codes

MAIL$_MESSAGE_BEFORE

When you specify MAIL$_MESSAGE_BEFORE, MAIL$MESSAGE_SELECT selects a message received before a specified date and time. The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 255 characters long in absolute time.

Specify a value from 0 to 255 in the buffer length field of the item descriptor.

MAIL$_MESSAGE_CC_SUBSTRING

MAIL$_MESSAGE_CC_SUBSTRING specifies a character string that must match a substring contained in the CC: field of the specified message. If the strings match, the message is selected. The buffer address field of the item descriptor points to a buffer that receives a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

MAIL$_MESSAGE_FLAGS

MAIL$_MESSAGE_FLAGS specifies bit masks that must be initialized to 1.

MAIL$_MESSAGE_FLAGS_MBZ

MAIL$_MESSAGE_FLAGS_MBZ specifies Mail system flags that must be set to 0.

MAIL$_MESSAGE_FOLDER

MAIL$_MESSAGE_FOLDER specifies the name of the folder that contains messages to be selected.

The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 255 characters long.

Specify a value from 0 to 255 in the buffer length field of the item descriptor.

This item code is required.

MAIL$_MESSAGE_FROM_SUBSTRING

MAIL$_MESSAGE_FROM_SUBSTRING specifies a user-specified character string that must match the substring contained in the From: field of a specified message. If the strings match, the message is selected.

The buffer address field of the item descriptor points to a buffer that receives a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

MAIL$_MESSAGE_SINCE

When you specify MAIL$_MESSAGE_SINCE, the Mail utility selects a message received on or after a specified date and time.

The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 255 characters long in absolute time.

Specify a value from 0 to 255 in the buffer length field of the item descriptor.

MAIL$_MESSAGE_TO_SUBSTRING

MAIL$_MESSAGE_TO_SUBSTRING specifies a user-specified character string that must match a substring contained in the To: field of a specified message. If the strings match, the message is selected.

The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

MAIL$_MESSAGE_SUBJ_SUBSTRING

MAIL$_MESSAGE_SUBJ_SUBSTRING specifies a user-specified character string that must match a substring contained in the Subject: field of a specified message. If the strings match, the message is selected.

The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

out_item_list


OpenVMS usage: itmlst_3
type: longword
access: write only
mechanism: by reference

Item list specifying the information you want the routine to return. The out_item_list argument is the address of a list of item descriptors, each of which describes an item of information. The list of item descriptors is terminated by longword value of 0.

Output Item Code

MAIL$_MESSAGE_SELECTED

When you specify MAIL$_MESSAGE_SELECTED, MAIL$MESSAGE_SELECT returns the number of selected messages as a longword value.

Description

MAIL$MESSAGE_SELECT deselects previously selected messages whether or not you request a valid selection.

Condition Values Returned

MAIL$_ILLCTXADR The context block address is illegal.
MAIL$_INVITMCOD The specified item code is invalid.
MAIL$_INVITMLEN The specified item length is invalid.
MAIL$_INVQUAVAL The specified qualifier is invalid
MAIL$_MISREQITEM The required item is missing.
MAIL$_NOFILEOPEN The mail file is not open.
MAIL$_NOTEXIST The specified folder does not exist.
MAIL$_NOTISAM The operation applies only to indexed files.
MAIL$_WRONGCTX The context block is incorrect.
MAIL$_WRONGFILE The specified file is incorrect in this context.
SS$_ACCVIO Access violation.
Any condition value returned by LIB$GET_VM.

MAIL$SEND_ABORT

Cancels a currently executing send operation.

Format

MAIL$SEND_ABORT context ,in_item_list ,out_item_list


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value

Longword condition value. All utility routines return a condition value in R0. Condition values that can be returned by this routine are listed under Condition Value Returned.


Arguments

context


OpenVMS usage: context
type: longword (unsigned)
access: modify
mechanism: by reference

Send context information to be passed to send routines. The context argument is the address of a longword that contains send context information returned by MAIL$SEND_BEGIN.

in_item_list


OpenVMS usage: itmlst_3
type: longword (unsigned)
access: read only
mechanism: by reference

Item list specifying options for the routine. This routine does not use the in_item_list argument.

out_item_list


OpenVMS usage: itmlst_3
type: longword
access: write only
mechanism: by reference

Item list specifying the information you want the routine to return. This routine does not use the out_item_list argument.


Description

MAIL$SEND_ABORT is useful when, for example, the user presses Ctrl/C during the execution of MAIL$SEND_MESSSAGE.

Condition Value Returned

SS$_NORMAL Normal successful completion.

MAIL$SEND_ADD_ADDRESS

Adds an address to the address list. If an address list does not exist, MAIL$SEND_ADD_ADDRESS creates one.

Format

MAIL$SEND_ADD_ADDRESS context ,in_item_list ,out_item_list


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value

Longword condition value. All utility routines return a condition value in R0. Condition values that can be returned by this routine are listed under Condition Values Returned.


Arguments

context


OpenVMS usage: context
type: longword (unsigned)
access: modify
mechanism: by reference

Send context information to be passed to send routines. The context argument is the address of a longword that contains send context information returned by MAIL$SEND_BEGIN.

in_item_list


OpenVMS usage: itmlst_3
type: longword (unsigned)
access: read only
mechanism: by reference

Item list specifying options for the routine. The in_item_list argument is the address of a list of item descriptors, each of which specifies an option and provides the information needed to perform the operation.

The item list is terminated by longword value of 0.


Input Item Codes

MAIL$_SEND_USERNAME

MAIL$_SEND_USERNAME specifies that the Mail utility add a specified user name to the address list. The buffer address field of the item descriptor points to a buffer that receives a character string 0 to 255 characters long.

Specify a value from 0 to 255 in the buffer length field of the item descriptor.

The item code MAIL$_SEND_USERNAME is required.

MAIL$_SEND_USERNAME_TYPE

MAIL$_SEND_USERNAME_TYPE specifies the type of user name added to the address list. The buffer address field of the item descriptor points to a word that contains the user name type.

There are two types of user names, as follows:

Note

Currently, the symbols MAIL$_TO and MAIL$_CC define user name types.

out_item_list


OpenVMS usage: itmlst_3
type: longword
access: write only
mechanism: by reference

Item list specifying the information you want the routine to return. The out_item_list argument is the address of a list of item descriptors, each of which describes an item of information. The list of item descriptors is terminated by longword value of 0.

Output Item Codes

None.

Description

If you do not specify a MAIL$_SEND_USERNAME_TYPE, MAIL$SEND_ADD_ADDRESS uses MAIL$_TO. You can specify only one user name per call to MAIL$SEND_ADD_ADDRESS.

Condition Values Returned

MAIL$_INVITMCOD The specified item code is invalid.
MAIL$_INVITMLEN The specified item length is invalid.
MAIL$_MISREQITEM The required item is missing.
SS$_ACCVIO Access violation.
Any condition values returned by LIB$TPARSE.

MAIL$SEND_ADD_ATTRIBUTE

Adds an attribute, such as Subject or To, to the message you are currently constructing.

Format

MAIL$SEND_ADD_ATTRIBUTE context ,in_item_list ,out_item_list


RETURNS


OpenVMS usage: cond_value
type: longword (unsigned)
access: write only
mechanism: by value

Longword condition value. All utility routines return a condition value in R0. Condition values that can be returned by this routine are listed under Condition Values Returned.


Arguments

context


OpenVMS usage: context
type: longword (unsigned)
access: modify
mechanism: by reference

Send context information to be passed to send routines. The context argument is the address of a longword that contains send context information returned by MAIL$SEND_BEGIN.

You should specify this argument as 0 in the first of a sequence of calls to MAIL routines. In following calls, you should specify the Send context value returned by the previous routine.

in_item_list


OpenVMS usage: itmlst_3
type: longword (unsigned)
access: read only
mechanism: by reference

Item list specifying options for the routine. The in_item_list argument is the address of a list of item descriptors, each of which specifies an option and provides the information needed to perform the operation.

The item list is terminated by longword value of 0.


Input Item Codes

MAIL$_SEND_CC_LINE

MAIL$_SEND_CC_LINE specifies a descriptor of the CC: field text. The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

MAIL$_SEND_FROM_LINE

MAIL$_SEND_FROM_LINE specifies a descriptor of the From: field text of the message to be sent. The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

Calls to MAIL$SEND_ADD_ATTRIBUTE using this input item code must be made before any calls to MAIL$SEND_ADD_ADDRESS.

The SYSPRV privilege is required to alter the From: of a message.

MAIL$_SEND_SUBJECT

MAIL$_SEND_SUBJECT specifies a descriptor of the Subject: field text of a message to be sent. The buffer address field of the item descriptor points to a buffer that contains a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

MAIL$_SEND_TO_LINE

MAIL$_SEND_TO_LINE specifies a descriptor of the To: field text of the message. The buffer address field of the item descriptor points to a buffer that receives a character string 0 to 998 characters long.

Specify a value from 0 to 998 in the buffer length field of the item descriptor.

out_item_list


OpenVMS usage: itmlst_3
type: longword
access: write only
mechanism: by reference

Item list specifying the information you want the routine to return. The out_item_list argument is the address of a list of item descriptors, each of which describes an item of information. The list of item descriptors is terminated by longword value of 0.

Output Item Codes

None.

Description

If you do not specify a To: line, the Mail utility supplies a To: line composed of user names on the To: address list. If you do not specify a CC: line, the Mail utility supplies a CC: line composed of user names on the CC: address list. In either of the above cases, commas separate the user names.

To add a message's From: field, you must have the SYSPRV privilege, and the Mail DECnet object must have the SYSPRV privilege on OUTGOING CONNECT (users can set the DECnet object privileges at their discretion).


Condition Values Returned

SS$_NORMAL Normal successful completion.
MAIL$_INVITMCOD The specified item code is invalid.
MAIL$_INVITMLEN The specified item length is invalid.
MAIL$_MISREQITEM The required item is missing.
SS$_ACCVIO Access violation.


Previous Next Contents Index