HP OpenVMS System Services Reference Manual


Previous Contents Index

Required Access or Privileges

$DELETE_PROXY requires access to the proxy database. To achieve access, the caller must have either SYSPRV privilege or a UIC group less than or equal to the MAXSYSGRP system parameter.

Required Quota

None

Related Services

$ADD_PROXY, $DISPLAY_PROXY, $VERIFY_PROXY


Condition Values Returned

SS$_NORMAL The service completed successfully.
SS$_ACCVIO The rem_node, rem_user, local_user, or flags argument cannot be read by the service.
SS$_BADBUFLEN The length of the rem_node, rem_user, or local_user argument was out of range.
SS$_BADPARAM An invalid flag was specified in the flags argument.
SS$_NOSYSPRV The caller does not have access to the proxy database.
   
This service can also return any of the following messages passed from the security server:
   
SECSRV$_BADNODENAMELEN The node name length is out of range.
SECSRV$_BADREMUSERLEN The remote user name length is out of range.
SECSRV$_INVALIDDELETE You attempted to remove the last local user with no default user remaining, or you tried to remove the last default user with no local user remaining. You must have at least one local user or one default user.
SECSRV$_NOSUCHPROXY The proxy specified by the rem_node and rem_user arguments does not exist in the proxy database.
SECSRV$_NOSUCHUSER The specified local user does not exist in the proxy's local user list, or is not the proxy's default user.
SECSRV$_PROXYNOTACTIVE Proxy processing is currently stopped. Try the request again later.
SECSRV$_SERVERNOTACTIVE The security server is not currently active. Try the request again later.

$DELETE_REGION_64 (Alpha and Integrity servers)

On Alpha and Integrity server systems, deletes a virtual region within the process's address space, including all created virtual addresses within the region.

This service accepts 64-bit addresses.


Format

SYS$DELETE_REGION_64 region_id_64 ,acmode ,return_va_64 ,return_length_64


C Prototype

nt sys$delete_region_64 (struct _generic_64 *region_id_64, unsigned int acmode, void *(*(return_va_64)), unsigned __int64 *return_length_64);


Arguments

region_id_64


OpenVMS usage: region identifier
type: quadword (unsigned)
access: read only
mechanism: by 32- or 64-bit reference

The region ID associated with the region to be deleted. The region ID specified must be one returned by the $CREATE_REGION_64 service. You cannot specify VA$C_P0, VA$C_P1, or VA$C_P2.

acmode


OpenVMS usage: access_mode
type: longword (unsigned)
access: read only
mechanism: by value

Access mode associated with the call to $DELETE_REGION_64. The acmode argument is a longword containing the access mode.

The $PSLDEF macro in STARLET.MLB and the file PSLDEF.H in SYS$STARLET_C.TLB define the following symbols and their values for the four access modes:
Value Symbolic Name Access Mode
0 PSL$C_KERNEL Kernel
1 PSL$C_EXEC Executive
2 PSL$C_SUPER Supervisor
3 PSL$C_USER User

The most privileged access mode used is the access mode of the caller. The caller can delete pages only if those pages are owned by an access mode equal to or less privileged than the access mode of the caller.

Once all pages are deleted within the region, the region can be deleted only if the region is owned by an access mode equal to or less privileged than the access mode of the caller.

return_va_64


OpenVMS usage: address
type: quadword address
access: write only
mechanism: by 32- or 64-bit reference

The lowest process virtual address of the pages that $DELETE_REGION_64 has successfully deleted. The return_va_64 argument is the 32- or 64-bit virtual address of a naturally aligned quadword into which the service returns the virtual address of the first page deleted. Virtual addresses are deleted from low address to high address, regardless of the direction in which virtual addresses expand for that region.

return_length_64


OpenVMS usage: byte count
type: quadword (unsigned)
access: write only
mechanism: by 32- or 64-bit reference

The length of the virtual address range that $DELETE_REGION_64 has successfully deleted. The return_length_64 argument is the 32- or 64-bit virtual address of a naturally aligned quadword into which the service returns the length of the deleted virtual address range in bytes.

Description

The Delete a Virtual Region service is a kernel mode service that can be called from any mode. This service deletes the user-defined region specified by the region_id_64 argument. You cannot delete the program (P0), control (P1), or 64-bit program (P2) regions.

The Delete a Virtual Region service also deletes all created virtual addresses within the specified region before deleting the region itself.

If a page within the region is owned by an access mode more privileged than the access mode of the caller, the condition value SS$_PAGOWNVIO is returned. The return_va_64 and return_length_64 arguments contain the virtual address range that was actually deleted by $DELETE_REGION_64. In this case, the region is not deleted because there are still some pages mapped within the region.

To delete a virtual region, the caller's access mode must be at least as privileged as the access mode associated with the region. If the caller is not privileged enough to delete the region, the condition value SS$_REGOWNVIO is returned only if all pages were successfully deleted from within the region.

If the condition value SS$_ACCVIO is returned by this service, a value cannot be returned in the memory locations pointed to by the return_va_64 and return_length_64 arguments. If the condition value SS$_ACCVIO is returned, no pages have been deleted, and the region has not been deleted.

If an error other than SS$_ACCVIO occurs, the returned address and returned length indicate the pages that were successfully deleted before the error occurred. If no pages were deleted, the return_va_64 argument contains the value --1 and a value cannot be returned in the memory location pointed to by the return_length_64 argument.

Required Privileges

None

Required Quota

None

Related Services

$CREATE_REGION_64, $CRETVA_64, $CRMPSC_FILE_64, $CRMPSC_GFILE_64, $CRMPSC_GPFILE_64, $CRMPSC_GPFN_64, $CRMPSC_PFN_64, $DELTVA_64, $EXPREG_64, $GET_REGION_INFO, $MGBLSC_64, $MGBLSC_GPFN_64


Condition Values Returned

SS$_NORMAL Successful completion. All pages within the region have been deleted as well as the region itself.
SS$_ACCVIO The return_va_64 argument or the return_length_64 argument cannot be written by the caller.
SS$_IVREGID Invalid region ID specified. This condition value is returned if P0, P1, or P2 space is specified because these regions cannot be deleted, or if no region exists for the specified ID.
SS$_REGOWNVIO The region is owned by a more privileged access mode than the access mode of the caller. All pages within the region have been deleted; however, the region has not been deleted.
SS$_PAGOWNVIO A page within the specified region is owned by a more privileged access mode than the access mode of the caller.
SS$_VA_IN_USE The existing underlying page cannot be deleted because it is associated with a buffer object.

$DELLNM

Deletes all logical names with the specified name at the specified access mode or outer access mode, or it deletes all the logical names with the specified access mode or outer access mode in a specified table.

On Alpha and Integrity server systems, this service accepts 64-bit addresses.


Format

SYS$DELLNM tabnam ,[lognam] ,[acmode]


C Prototype

int sys$dellnm (void *tabnam, void *lognam, unsigned char *acmode);


Arguments

tabnam


OpenVMS usage: logical_name
type: character-coded text string
access: read only
mechanism: by 32- or 64-bit descriptor--fixed-length string descriptor

Name of a logical name table or a list of tables to be searched for the logical name to be deleted. The tabnam argument is the 32- or 64-bit address of a descriptor that points to the table name. This argument is required.

If tabnam is not the name of a logical name table, it is assumed to be a logical name and is translated iteratively until either the name of a logical name table is found or the number of translations allowed by the system has been performed.

If tabnam translates to the name of a list of tables, $DELLNM does the following:

lognam


OpenVMS usage: logical_name
type: character-coded text string
access: read only
mechanism: by 32- or 64-bit descriptor--fixed-length string descriptor

Logical name to be deleted. The lognam argument is the 32- or 64-bit address of a descriptor that points to the logical name string.

acmode


OpenVMS usage: access_mode
type: byte (unsigned)
access: read only
mechanism: by 32- or 64-bit reference

Access mode to be used in the delete operation. The acmode argument is the 32- or 64-bit address of a byte containing this access mode. The $PSLDEF macro defines symbolic names for the four access modes.

You determine the access mode actually used in the delete operation by maximizing the access mode of the caller with the access mode specified by the acmode argument; that is, the less privileged of the two is used.

However, if you have SYSNAM privilege, the delete operation is executed at the specified access mode regardless of the caller's access mode.

If you omit this argument or specify it as 0, the access mode of the caller is used in the delete operation. The access mode used in the delete operation determines which tables are used and which names are deleted.


Description

The Delete Logical Name service deletes all logical names with the specified name at the specified access mode or outer access mode, or it deletes all the logical names with the specified access mode or outer access mode in a specified table. If any logical names being deleted are also the names of logical name tables, then all of the logical names contained within those tables and all of their subtables are also deleted.

Required Access or Privileges

Depending on the operation, the calling process might need one of the following access or rights privileges to use $DELLNM:

Required Quota

None

Related Services

$CRELNM, $CRELNT, $TRNLNM


Condition Values Returned

SS$_NORMAL The service completed successfully.
SS$_ACCVIO The service cannot access the locations specified by one or more arguments.
SS$_BADPARAM One or more arguments have an invalid value, or a logical name table name was not specified.
SS$_INSFMEM There is insufficient dynamic memory to build a message describing the deletion of a clusterwide name.
SS$_IVLOGNAM The lognam argument specifies a string whose length is not in the required range of 1 through 255 characters.
SS$_IVLOGTAB The tabnam argument does not specify a logical name table.
SS$_NOLOGNAM The specified logical name table does not exist, or a logical name with an access mode equal to or less privileged than the caller's access mode does not exist in the logical name table.
SS$_NOLOGTAB The specified logical name table does not exist.
SS$_NOPRIV The caller lacks the necessary privilege to delete the logical name.
SS$_TOOMANYLNAM The logical name translation of the table name exceeded the allowable depth (10 translations).

$DELMBX

Marks a permanent mailbox for deletion.

Format

SYS$DELMBX chan


C Prototype

int sys$delmbx (unsigned short int chan);


Argument

chan


OpenVMS usage: channel
type: word (unsigned)
access: read only
mechanism: by value

Number of the channel assigned to the mailbox that is to be deleted. The chan argument is a word containing this number.

Description

The Delete Mailbox service marks a permanent mailbox for deletion. The actual deletion of the mailbox and of its associated logical name assignment occurs when no more I/O channels are assigned to the mailbox.

You can delete a mailbox only from an access mode equal to or more privileged than the access mode from which the mailbox channel was assigned. Temporary mailboxes are automatically deleted when their reference count goes to 0.

The $DELMBX service does not deassign the channel assigned by the caller, if any. The caller must deassign the channel with the Deassign I/O Channel ($DASSGN) service.

Required Access or Privileges

You need PRMMBX privilege to delete a permanent mailbox.

Required Quota

None

Related Services

$ALLOC, $ASSIGN, $BRKTHRU, $BRKTHRUW, $CANCEL, $CREMBX, $DALLOC, $DASSGN, $DEVICE_SCAN, $DISMOU, $GETDVI, $GETDVIW, $GETMSG, $GETQUI, $GETQUIW, $INIT_VOL, $MOUNT, $PUTMSG, $QIO, $QIOW, $SNDERR, $SNDJBC, $SNDJBCW, $SNDOPR


Condition Values Returned

SS$_NORMAL The service completed successfully.
SS$_DEVNOTMBX The specified channel is not assigned to a mailbox.
SS$_IVCHAN You specified an invalid channel number, that is, a channel number of 0 or a number larger than the number of channels available.
SS$_NOPRIV The specified channel is not assigned to a device; the process does not have the privilege to delete a permanent mailbox or a mailbox in memory shared by multiple processors; or the access mode of the caller is less privileged than the access mode from which the channel was assigned.

$DELPRC

Allows a process to delete itself or another process.

Format

SYS$DELPRC [pidadr] ,[prcnam] ,[flags]


C Prototype

int sys$delprc (unsigned int *pidadr, void *prcnam);


Arguments

pidadr


OpenVMS usage: process_id
type: longword (unsigned)
access: modify
mechanism: by reference

Process identification (PID) of the process to be deleted. The pidadr argument is the address of a longword that contains the PID. The pidadr argument can refer to a process running on the local node or a process running on another node in the OpenVMS Cluster system.

You must specify the pidadr argument to delete processes in other UIC groups.

prcnam


OpenVMS usage: process_name
type: character-coded text string
access: read only
mechanism: by descriptor--fixed-length string descriptor

Process name of the process to be deleted. The prcnam is the address of a character string descriptor pointing to the process name string. A process running on the local node can be identified with a 1- to 15-character string. To identify a process on a particular node on a cluster, specify the full process name, which includes the node name as well as the process name. The full process name can contain up to 23 characters.

You use the prcnam argument to delete only processes in the same UIC group as the calling process, because process names are unique to UIC groups, and the operating system uses the UIC group number of the calling process to interpret the process name specified by the prcnam argument.

You must use the pidadr argument to delete processes in other groups.

flags


OpenVMS usage: mask
type: longword (unsigned)
access: read only
mechanism: by value

The flags argument can be used to control whether exit handlers are called by $DELPRC. If the flags argument is not specified or is specified with a zero, the system parameter DELPRC_EXIT controls what exit handlers, if any, are called by $DELPRC.

The $DELPRCSYMDEF macro defines a symbolic name for EXIT and NOEXIT. The EXIT flag should be or'd with the access mode defined by the $PSLDEF macro for the initial exit handler.

The following table describes each flag:
Flag Description
DELPRC$M_EXIT When set, exit handlers as specified by DELPRC$M_MODE are called. This flag is ignored for a hard suspended process.
DELPRC$M_MODE 2 bit field: values psl$c_kernel, psl$c_exec, psl$c_super, psl$c_user (from the $PSLDEF macro)
DELPRC$M_NOEXIT Set to disable any exit handler execution

Note

Deleting the current process:

When $DELPRC is used to delete the current process, execution cannot continue in the mode from which $DELPRC was called. The first exit handlers that are called will be in the next more privileged mode relative to the mode from which $DELPRC was called (subject to options defined). For example:

  • $DELPRC called from user mode can call supervisor mode exit handlers.
  • $DELPRC called from exec mode can only execute kernel mode exit handlers.
  • $DELPRC called from kernel mode cannot call exit handlers.

Description

The Delete Process service allows a process to delete itself or another process. If you specify neither the pidadr nor the prcnam argument, $DELPRC deletes the calling process; control is not returned. If the longword at address pidadr is 0, the PID of the target process is returned. This system service requires system dynamic memory.

When you delete a process or subprocess, a termination message is sent to its creating process, provided the mailbox to receive the message still exists and the creating process has access to the mailbox. The termination message is sent before the final rundown is initiated; thus, the creating process might receive the message before the process deletion is complete.

Due to the complexity of the required rundown operations, a significant time interval occurs between a delete request and the actual deletion of the process; however, the $DELPRC service returns to the caller immediately after initiating the rundown operation.

If you issue subsequent delete requests for a process currently being deleted, the requests return immediately with a successful completion status.

Process exit handlers are not invoked when a process is deleted. For details on exit handlers, see the $DCLEXH service.

Required Access or Privileges

Depending on the operation, the calling process might need one of the following privileges to use $DELPRC:

Required Quota

None. Deductible resource quotas granted to subprocesses are returned to the creating process when the subprocesses are deleted.

Related Services

$CANEXH, $CREPRC, $DCLEXH, $EXIT, $FORCEX, $GETJPI, $GETJPIW, $HIBER, $PROCESS_SCAN, $RESUME, $SETPRI, $SETPRN, $SETPRV, $SETRWM, $SUSPND, $WAKE


Condition Values Returned

SS$_NORMAL The service completed successfully.
SS$_ACCVIO The process name string or string descriptor cannot be read by the caller, or the process identification cannot be written by the caller.
SS$_INCOMPAT The remote node is running an incompatible version of the operating system.
SS$_INSFMEM The system dynamic memory is insufficient for completing the operation.
SS$_NONEXPR The specified process does not exist, or an invalid process identification was specified.
SS$_NOPRIV The caller does not have the privilege to delete the specified process.
SS$_NOSUCHNODE The process name refers to a node that is not currently recognized as part of the cluster.
SS$_REMRSRC The remote node has insufficient resources to respond to the request. (Bring this error to the attention of your system manager.)
SS$_UNREACHABLE The remote node is a member of the cluster but is not accepting requests. (This is normal for a brief period early in the system boot process.)


Previous Next Contents Index