HP OpenVMS System Services Reference Manual


Previous Contents Index


$ERASE

The Erase service deletes a disk file and removes the file's directory entry specified in the path to the file. If additional directory entries have been created for this file by the Enter service, you must use the Remove service to delete them.

For additional information about this service, see the OpenVMS Record Management Services Reference Manual.


$EXIT

Initiates image rundown when the current image in a process completes execution. Control normally returns to the command interpreter.

Format

SYS$EXIT [code]


C Prototype

int sys$exit (unsigned int code);


Argument

code


OpenVMS usage: cond_value
type: longword (unsigned)
access: read only
mechanism: by value

Longword value to be saved in the process header as the completion status of the current image. If you do not specify this argument in a macro call, a value of 1 is passed as the completion code for VAX MACRO and VAX BLISS--32, and a value of 0 is passed for other languages. You can test this value at the command level to provide conditional command execution.

Description

The $EXIT service is unlike all other system services in that it does not return status codes in R0 or anywhere else. The $EXIT service does not return control to the caller; it performs an exit to the command interpreter or causes the process to terminate if no command interpreter is present.

Required Access or Privileges

None

Required Quota

None

Related Services

$CANEXH, $CREPRC, $DCLEXH, $DELPRC, $FORCEX, $GETJPI, $GETJPIW, $HIBER, $PROCESS_SCAN, $RESUME, $SETPRI, $SETPRN, $SETPRV, $SETRWM, $SUSPND, $WAKE


$EXPREG

Adds a specified number of new virtual pages to a process's program region or control region for the execution of the current image. Expansion occurs at the current end of that region's virtual address space.

Format

SYS$EXPREG pagcnt ,[retadr] ,[acmode] ,[region]


C Prototype

int sys$expreg (unsigned int pagcnt, struct _va_range *retadr, unsigned int acmode, char region);


Arguments

pagcnt


OpenVMS usage: longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by value

Number of pagelets to add to the current end of the program or control region. The pagcnt argument is a longword value containing this number.

On Alpha and Integrity server systems, the specified value is rounded up to an even multiple of the CPU-specific page size.

retadr


OpenVMS usage: address_range
type: longword (unsigned)
access: write only
mechanism: by reference

Starting and ending process virtual addresses of the pages that $EXPREG has actually added. The retadr argument is the address of a 2-longword array containing, in order, the starting and ending process virtual addresses.

acmode


OpenVMS usage: access_mode
type: longword (unsigned)
access: read only
mechanism: by value

Access mode to be associated with the newly added pages. The acmode argument is a longword containing the access mode.

The most privileged access mode used is the access mode of the caller.

The newly added pages are given the following protection: (1) read and write access for access modes equal to or more privileged than the access mode used in the call, and (2) no access for access modes less privileged than that used in the call.

region


OpenVMS usage: longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by value

Number specifying which program region is to be expanded. The region argument is a longword value. A value of 0 (the default) specifies that the program region (P0 region) is to be expanded. A value of 1 specifies that the control region (P1 region) is to be expanded.

Description

The Expand Program/Control Region service adds a specified number of new virtual pages to a process's program region or control region for the execution of the current image. Expansion occurs at the current end of that region's virtual address space.

The new pages, which were previously inaccessible to the process, are created as demand-zero pages.

Because the bottom of the user stack is normally located at the end of the control region, expanding the control region is equivalent to expanding the user stack. The effect is to increase the available stack space by the specified amount.

The starting address returned is always the first available page in the designated region; therefore, the ending address is smaller than the starting address when the control region is expanded and is larger than the starting address when the program region is expanded.

If an error occurs while pages are being added, the retadr argument (if specified) indicates the pages that were successfully added before the error occurred. If no pages were added, both longwords of the retadr argument contain the value --1.

Required Access or Privileges

None

Required Quota

The process's paging file quota (PGFLQUOTA) must be sufficient to accommodate the increased size of the virtual address space.

Related Services

$ADJSTK, $ADJWSL, $CRETVA, $CRMPSC, $DELTVA, $DGBLSC, $LCKPAG, $LKWSET, $MGBLSC, $PURGWS, $SETPRT, $SETSTK, $SETSWM, $ULKPAG, $ULWSET, $UPDSEC, $UPDSECW

Typically, the information returned in the location addressed by the retadr argument (if specified) can be used as the input range to the Delete Virtual Address Space ($DELTVA) service.


Condition Values Returned

SS$_NORMAL The service completed successfully.
SS$_ACCVIO The return address array cannot be written by the caller.
SS$_EXQUOTA The process exceeded its paging file quota.
SS$_ILLPAGCNT The specified page count was less than 1 or would cause the program or control region to exceed its maximum size.
SS$_INSFWSL The process's working set limit is not large enough to accommodate the increased virtual address space.
SS$_VASFULL The process's virtual address space is full. No space is available in the process page table for the requested regions.

$EXPREG_64 (Alpha and Integrity servers)

On Alpha and Integrity server systems, adds a specified number of demand-zero allocation pages to a process's virtual address space for the execution of the current image. Expansion occurs at the next free available address within the specified region.

This service accepts 64-bit addresses.


Format

SYS$EXPREG_64 region_id_64 ,length_64 ,acmode ,flags ,return_va_64 ,return_length_64


C Prototype

int sys$expreg_64 (struct _generic_64 *region_id_64, unsigned __int64 length_64, unsigned int acmode, unsigned int flags, void *(*(return_va_64)), unsigned __int64 *return_length_64);


Arguments

region_id_64


OpenVMS usage: region identifier
type: quadword (unsigned)
access: read only
mechanism: by 32- or 64-bit reference

The region ID associated with the virtual address range to be expanded. The file VADEF.H in SYS$STARLET_C.TLB and the $VADEF macro in STARLET.MLB define a symbolic name for each of the three default regions in P0, P1, and P2 space.

The following region IDs are defined:
Symbol Region
VA$C_P0 Program region
VA$C_P1 Control region
VA$C_P2 64-bit program region

Other region IDs, as returned by the $CREATE_REGION_64 service, can be specified.

length_64


OpenVMS usage: byte count
type: quadword (unsigned)
access: read only
mechanism: by value

Length of the virtual address space to be created. The length specified must be a multiple of CPU-specific pages.

acmode


OpenVMS usage: access_mode
type: longword (unsigned)
access: read only
mechanism: by value

Access mode associated with the call to $EXPREG_64. The access mode determines the owner mode of the pages as well as the read and write protection on the pages. The acmode argument is a longword containing the access mode. The $PSLDEF macro defines symbols for the four access modes.

The $EXPREG_64 service uses whichever of the following two access modes is least privileged:

Address space cannot be created within a region that has a create mode associated with it that is more privileged than the caller's mode. The condition value SS$_IVACMODE is returned if the caller is less privileged than the create mode for the region.

flags


OpenVMS usage: mask_longword
type: longword (unsigned)
access: read only
mechanism: by value

Flag mask controlling the characteristics of the demand-zero pages created. The flags argument is a longword bit vector in which each bit corresponds to a flag. The $VADEF macro and the VADEF.H file define a symbolic name for each flag. You construct the flags argument by performing a logical OR operation on the symbol names for all desired flags.

All bits in the flags argument are reserved for future use by HP and should be specified as 0. The condition value SS$_IVVAFLG is returned if any bits are set.

return_va_64


OpenVMS usage: address
type: quadword address
access: write only
mechanism: by 32- or 64-bit reference

The lowest process virtual address of a created virtual address range. The return_va_64 argument is the 32- or 64-bit virtual address of a naturally aligned quadword into which the service returns the virtual address.

return_length_64


OpenVMS usage: byte count
type: quadword (unsigned)
access: write only
mechanism: by 32- or 64-bit reference

The 32- or 64-bit virtual address of a naturally aligned quadword into which the service returns the length in bytes of the virtual address range created.

Description

The Expand Virtual Address Space service is a kernel mode service that can be called from any mode. This service adds a range of demand-zero allocation pages to a process's virtual address space for the execution of the current image. Expansion occurs at the next free available address within the specified region. The new pages, which were previously inaccessible to the process, are created as demand-zero pages.

The returned address is always the lowest virtual address in the range of pages created. The returned length is always an unsigned byte count indicating the length of the range of pages created.

Successful return status from $EXPREG_64 Expand Virtual Address service means that the specified region's virtual address space was expanded by the number of bytes specified in the length_64 argument.

If the condition value SS$_ACCVIO is returned by this service, a value cannot be returned in the memory locations pointed to by the return_va_64 and return_length_64 arguments. If a condition value other than SS$_ACCVIO is returned, the returned address and returned length indicate the pages that were successfully added before the error occurred. If no pages were added, the return_va_64 argument will contain the value --1, and a value cannot be returned in the memory location pointed to by the return_length_64 argument.

Required Privileges

None

Required Quota

The working set quota (WSQUOTA) of the process must be sufficient to accommodate the increased length of the process page table required by the increase in virtual address space.

The process's paging file quota (PGFLQUOTA) must be sufficient to accommodate the increased size of the virtual address space.

Related Services

$CREATE_BUFOBJ_64, $CREATE_REGION_64, $CRETVA_64, $DELETE_REGION_64, $DELTVA_64, $LCKPAG_64, $LKWSET_64, $PURGE_WS, $SETPRT_64, $ULKPAG_64, $ULWSET_64


Condition Values Returned

SS$_NORMAL The service completed successfully.
SS$_ACCVIO The return_va_64 argument or the return_length_64 argument cannot be written by the caller.
SS$_EXPGFLQUOTA The process exceeded its paging file quota.
SS$_INSFWSL The process's working set limit is not large enough to accommodate the increased virtual address space.
SS$_IVACMODE The caller's mode is less privileged than the create mode associated with the region.
SS$_IVREGID An invalid region ID was specified.
SS$_IVVAFLG An invalid flag, a reserved flag, or an invalid combination of flags and arguments was specified.
SS$_LEN_NOTPAGMULT The length_64 argument is not a multiple of CPU-specific pages.
SS$_NOSHPTS The region ID of a shared page table region was specified.
SS$_REGISFULL The specified virtual region is full.

$EXTEND

The Extend service increases the amount of space allocated to a disk file. This service is most useful for extending relative files and indexed files when you are doing block I/O transfers using the Write service.

For additional information about this service, see the OpenVMS Record Management Services Reference Manual.


$FAO/$FAOL

Converts a binary value into an ASCII character string in decimal, hexadecimal, or octal notation; returns the character string in an output string; and inserts variable character-string data into an output string.

The Formatted ASCII Output with List Parameter ($FAOL) service provides an alternate method for specifying input parameters when calling the $FAO system service.

The formats for both services are shown in the Format section.

On Alpha and Integrity server systems, this service accepts 64-bit addresses.


Format

SYS$FAO ctrstr ,[outlen] ,outbuf ,[p1]...[pn]

SYS$FAOL ctrstr ,[outlen] ,outbuf ,[prmlst]


C Prototype

int sys$fao (void *ctrstr, unsigned short int *outlen, void *outbuf,...);

int sys$faol (void *ctrstr, unsigned short int *outlen, void *outbuf, void *prmlst);


Arguments

ctrstr


OpenVMS usage: char_string
type: character-coded text string
access: read only
mechanism: by 32- or 64-bit descriptor--fixed-length string descriptor

Control string passed to $FAO that contains the text to be output together with one or more $FAO directives. $FAO directives are used to specify repeat counts or the output field length, or both, and they are preceded by an exclamation point (!). The ctrstr argument is the 32- or 64-bit address of a character string descriptor pointing to the control string. The formatting of the $FAO directives is described in the Description section.

There is no restriction on the length of the control string or on the number of $FAO directives it can contain; however, if an exclamation point must appear in the output string, it must be represented in the control string by a double exclamation point (!!). A single exclamation point in the control string indicates to $FAO that the next characters are to be interpreted as FAO directives.

When $FAO processes the control string, it writes to the output buffer each character that is not part of an $FAO directive.

If the $FAO directive is valid, $FAO processes it. If the directive requires a parameter, $FAO processes the next consecutive parameter in the specified parameter list. If the $FAO directive is not valid, $FAO terminates and returns a condition value in R0.

Table SYS-35 lists and describes the $FAO directives. Table SYS-36 shows the $FAO output field lengths and their fill characters.

The $FAO service reads parameters from the argument list specified in the call; these arguments have the names p1, p2, p3, and so on, up to p17. Each argument specifies one parameter. Because $FAO accepts a maximum of 17 parameters in a single call, you must use $FAOL if the number of parameters exceeds 17. The $FAOL service accepts any number of parameters used with the prmlst argument.

outlen


OpenVMS usage: word_unsigned
type: word (unsigned)
access: write only
mechanism: by 32- or 64-bit reference

Length in bytes of the fully formatted output string returned by $FAO. The outlen argument is the 32- or 64-bit address of a word containing this value.

outbuf


OpenVMS usage: char_string
type: character-coded text string
access: write only
mechanism: by 32- or 64-bit descriptor--fixed-length string descriptor

Output buffer into which $FAO writes the fully formatted output string. The outbuf argument is the 32- or 64-bit address of a character string descriptor pointing to the output buffer. The maximum number of bytes written is limited to 64K.

p1 to pn


OpenVMS usage: varying_arg
type: quadword (signed)
access: read only
mechanism: by value

$FAO directive parameters. The p1 argument is a quadword containing the parameter needed by the first $FAO directive encountered in the control string, the p2 argument is a quadword containing the parameter needed for the second $FAO directive, and so on for the remaining arguments up to p17. If an $FAO directive does not require a parameter, that $FAO directive is processed without reading a parameter from the argument list.

Depending on the directive, a parameter can be a value to be converted, a 32- or 64-bit address of a string to be inserted into the output string, or a length or argument count. Each directive in the control string might require a corresponding parameter or parameters.

prmlst


OpenVMS usage: vector_longword_unsigned
type: longword (unsigned)
access: read only
mechanism: by 32- or 64-bit reference

List of $FAO directive parameters to be passed to $FAOL. The prmlst argument is the 32- or 64-bit address of a list of longwords wherein each longword is a parameter. The $FAOL service processes these parameters sequentially as it encounters, in the control string, $FAO directives that require parameters.

The parameter list can be a data structure that already exists in a program and from which certain values are to be extracted.


Description

The Formatted ASCII Output ($FAO) service converts a binary value into an ASCII character string in decimal, hexadecimal, or octal notation and returns the character string in an output string, and inserts variable character string data into an output string.

The Formatted ASCII Output with List Parameter ($FAOL) service provides an alternate way to specify input parameters for a call to the $FAO system service. The formats for both $FAO and $FAOL are shown in the Format section.

The $FAO_S macro form uses a PUSHL instruction for all parameters (p1 through p17) passed to the service; if you specify a symbolic address, it must be preceded with a number sign (#) or loaded into a register.

You can specify a maximum of 17 parameters on the $FAO macro. If more than 17 parameters are required, use the $FAOL macro.

This service does not check the length of the argument list and therefore cannot return the SS$_INSFARG (insufficient arguments) error status code. If the service does not receive a sufficient number of arguments (for example, if you omit required commas in the call), you might not get the desired result.

$FAO Directives

$FAO directives can appear anywhere in the control string. The general format of an $FAO directive is as follows:

!DD

The exclamation point (!) specifies that the following characters are to be interpreted as an $FAO directive, and the characters DD represent a 1- or 2-character $FAO directive.

Note

When the characters of the $FAO directive are alphabetic, they must be uppercase.

An $FAO directive can optionally specify the following:

You can specify repeat counts and output field lengths as variables by using a number sign (#) in place of an absolute numeric value:

Numeric FAO output directives (B, W, L, Q, I, A, H, J) can include the indirect directive @. This immediately precedes the directive (@DD), and indicates that the next parameter is the address of the value instead of the value itself. This directive must be used with any directive that can produce a quadword output when using $FAOL; otherwise, $FAOL creates a 64-bit sign-extended value. This includes the Q, A, I, H, and J directives.


Previous Next Contents Index