HP OpenVMS DCL Dictionary


Previous Contents Index


SHOW PROCESS

Displays information about a process and its subprocesses.

Requires GROUP privilege to show other processes in the same group. Requires WORLD privilege to show processes outside your group.


Format

SHOW PROCESS [[node-name::]process-name]


Parameters

node-name::

The name of the node on which the specified process is running.

You must specify a node name on the same OpenVMS Cluster on which the current process is running.

process-name

The name of the process about which information is to be displayed. The process name can have up to 15 alphanumeric characters.

The specified process name must be in the same group as the current process.


Description

The SHOW PROCESS command displays information about a process and its subprocesses. If no qualifier is entered, only the following subset of information is displayed:
Time
Process terminal
User name and user identification code (UIC)
Node name
Process name and process identification (PID)
Priority
Default directory
Allocated devices
Number of kernel threads

A local process name can look like a remote process name; therefore, if you specify ATHENS::SMITH, the system checks for a process named ATHENS::SMITH on the local node before checking node ATHENS for a process named SMITH.

You also can use the /IDENTIFICATION=pid qualifier to specify a process name. If you use the /IDENTIFICATION qualifier and the process-name parameter together, the qualifier overrides the parameter. If you do not specify either the process-name parameter or the /IDENTIFICATION qualifier, information is displayed for the current process.

If you have GROUP or WORLD privilege, you can display information about processes other than your own. With GROUP privilege you can look at other processes in your group. With WORLD privilege you can look at processes outside of your group. You must use the /IDENTIFICATION qualifier to look at processes outside of your group.


Qualifiers

/ACCOUNTING

Shows the resources used by the process.

/ALL

Displays the basic subset of information as well as information about:
Accounting
Dynamic memory use
Privileges
Quotas
Shelving
Subprocesses
Wildcard status

/CASE_LOOKUP

Lists the active case sensitivity setting in your process (either BLIND or SENSITIVE).

HP strongly recommends that you use caution when enabling case sensitivity in your processes.

See the Guide to OpenVMS File Applications for additional information.

/CONTINUOUS

Displays continuously updated information about the local process in an OpenVMS environment. You cannot use the /CONTINUOUS qualifier to display information about a process on another node in a cluster environment.

While the continuous display is running, you can press the following keys to customize the output display:
Key Action
E Exits the continuous display.
Q Dynamically displays process quotas.
T Displays information for threads in the process. Press the T key repeatedly to cycle through multiple threads.
V Displays a map of the pages in the virtual address space of the process.

Each character displayed in the map represents the type of page. If the current program counter is in the page, the page type is indicated by an at sign (@). Pages locked in the working set are indicated by the letter L. Global pages are indicated by the letter G. Other valid pages in the working set are indicated by an asterisk (*).

Space bar Returns to the default display.

The /CONTINUOUS qualifier cannot be used with the /OUTPUT qualifier.

/DUMP

Displays the image dump setting which is set or cleared by the SET PROCESS/DUMP command.

/EXACT

Use with the /PAGE=SAVE and /SEARCH qualifiers to specify a search string that must match the search string exactly and must be enclosed with quotation marks (" ").

If you specify the /EXACT qualifier without the /SEARCH qualifier, exact search mode is enabled when you set the search string with the Find (E1) key.

/HIGHLIGHT[=keyword]

Use with the /PAGE=SAVE and /SEARCH qualifiers to specify the type of highlighting you want when a search string is found. When a string is found, the entire line is highlighted. You can use the following keywords: BOLD, BLINK, REVERSE, and UNDERLINE. BOLD is the default highlighting.

/IDENTIFICATION=pid

Requires GROUP or WORLD privilege to access processes other than your own.

Displays information about the process with the specified process identification (PID). The PID is assigned by the system when the process is created. When you specify a PID, you can omit the leading zeros.

If you specify the /IDENTIFICATION qualifier, it overrides the process-name parameter. If, in addition, you specify the /MEMORY qualifier, the PID value must be that of the current process.

/INTERVAL=n

Use with the /CONTINUOUS qualifier to update the information at the specified number of seconds.

/MEMORY

Displays the process's use of dynamic memory areas. The /MEMORY qualifier is allowed only for the current process.

/OUTPUT[=filespec]

/NOOUTPUT

Controls where the output of the command is sent. By default, the output of the SHOW PROCESS command is sent to the current SYS$OUTPUT device (usually your terminal). To send the output to a file, use the /OUTPUT qualifier followed by a file specification.

The asterisk (*) and the percent sign (%) wildcard characters are not allowed in the file specification. If you enter a partial file specification (for example, specifying only a directory), SHOW is the default file name and .LIS is the default file type.

If you enter the /NOOUTPUT qualifier, output is suppressed.

The /OUTPUT qualifier is incompatible with the /CONTINUOUS qualifier.

/PAGE[=keyword]

/NOPAGE (default)

Controls the display of process information on the screen.

You can use the following keywords with the /PAGE qualifier:
CLEAR_SCREEN Clears the screen before each page is displayed.
SCROLL Displays information one line at a time.
SAVE[= n] Enables screen navigation of information, where n is the number of pages to store.

The /PAGE=SAVE qualifier allows you to navigate through screens of information. The /PAGE=SAVE qualifier stores up to 5 screens of up to 255 columns of information. When you use the /PAGE=SAVE qualifier, you can use the following keys to navigate through the information:
Key Sequence Description
Up arrow key, Ctrl/B Scroll up one line.
Down arrow key Scroll down one line.
Left arrow key Scroll left one column.
Right arrow key Scroll right one column.
Find (E1) Specify a string to find when the information is displayed.
Insert Here (E2) Scroll right one half screen.
Remove (E3) Scroll left one half screen.
Select (E4) Toggle 80/132 column mode.
Prev Screen (E5) Get the previous page of information.
Next Screen (E6), Return, Enter, Space Get the next page of information.
F10, Ctrl/Z Exit. (Some utilities define these differently.)
Help (F15) Display utility help text.
Do (F16) Toggle the display to oldest/newest page.
Ctrl/W Refresh the display.

The /PAGE qualifier is not compatible with the /OUTPUT qualifier.

/PRIVILEGES

Displays current privileges and rights for the process. To display only privileges, also specify the /NORIGHTS qualifier. Use the SET PROCESS/PRIVILEGES command to enable process privileges on a system.

/QUOTAS

Displays, for each resource, either a quota or a limit. The values displayed for quotas reflect any quota reductions resulting from subprocess creation. The values displayed for limits reflect the resources available to a process at creation.

/RAD

Displays home resource affinity domain (RAD).

OpenVMS support for RADs is available on the Alpha GS series systems and Integrity server NUMA capable systems.

/RIGHTS (default)

/NORIGHTS

Displays the current rights for the specified process. Use the /NORIGHTS qualifier with the /PRIVILEGES qualifier to suppress the rights display.

/SCHEDULING_CLASS

Displays the scheduling class of the specified process.

/SEARCH="string"

Use with the /PAGE=SAVE qualifier to specify a string that you want to find in the information being displayed. Quotation marks are required for the /SEARCH qualifier, if you include spaces in the text string.

You can also dynamically change the search string by pressing the Find key (E1) while the information is being displayed. Quotation marks are not required for a dynamic search.

/SHELVING

Displays whether the process automatically unshelves files.

/SUBPROCESSES

Displays the current subprocesses in hierarchical order.

/SYMLINK

The SHOW PROCESS/ALL and SHOW PROCESS/SYMLINK commands display the status of the symlink wildcard search mode.

/TOKEN (Alpha/Integrity servers Only)

Displays the current token size as either Traditional (255 bytes) or Extended (4000 bytes). (A token is any element in a command line that is bounded by spaces. For example, the command COPY X.TXT Y.TXT contains three tokens.) The token size is determined by the setting of bit 1 in the DCL_CTLFLAGS system parameter. You can use the SET PROCESS/TOKEN command to change the token size.

/UNITS

Displays whether the process currently reports disk space in bytes or blocks. You can change this setting using SET PROCESS/UNITS.

/WRAP

/NOWRAP (default)

Use with the /PAGE=SAVE qualifier to limit the number of columns to the width of the screen and to wrap lines that extend beyond the width of the screen to the next line.

The /NOWRAP qualifier extends lines beyond the width of the screen and can be seen when you use the scrolling (left and right) features provided by the /PAGE=SAVE qualifier.


Examples

#1

$ SHOW PROCESS OCALA::MALIK
 14-DEC-2001 15:35:19.39  User: MALIK   Process ID: 28200364
                          Node: OCALA   Process name: MALIK            
Terminal:        RTA5:
User identifier: [VMS,MALIK]
Base  priority:   4
Default file spec: WORK5:[MALIK]
Devices allocated: RTA5:
 
      

The SHOW PROCESS command in this example is entered by the user MALIK. The system displays the subset of information for the owned process on node OCALA. The information includes the following:

Date and time the SHOW PROCESS command is entered
User name
Process identification (PID) number
Node name
Process name
Device name of the current SYS$INPUT device
User identification code (UIC)
Base execution priority
Default device (only for processes on the same node)
Default directory (only for current processes)
Devices allocated to the process and volumes mounted, if any
#2

$ SHOW PROCESS/ACCOUNTING
 14-DEC-2001 14:48:01.31   User: MALIK  Process ID:   28200364
                           Node: OCALA  Process name: "MALIK"
  
 Accounting information:
  Buffered I/O count:      4878  Peak working set size:      844
  Direct I/O count:        1284  Peak virtual size:         1176
  Page faults:             6100  Mounted volumes:              0
  Images activated:          22
  Elapsed CPU time:      0 00:01:20.51
  Connect time:          0 04:06:03.75
 
      

The SHOW PROCESS command in this example displays the accounting statistics for the process. The values under Peak working set size and Peak virtual size are rendered and in pagelets on Alpha.

#3

$ SHOW PROCESS/PRIVILEGES
 
 14-DEC-2001 14:59:28.53  User: MALIK   Process ID:    28200364
                          Node: OCALA   Process name: "MALIK" 
   
 Process privileges:
  GROUP                may affect other processes in same group
  TMPMBX               may create temporary mailbox
  NETMBX               may create network device
 
 Process rights identifiers:
  INTERACTIVE
  DIALUP
 
      

The SHOW PROCESS command in this example displays the current privileges for the process.

#4

$ SHOW PROCESS/QUOTAS
 
 14-DEC-2001 15:00:28.79   User: MALIK  Process ID:    28200364
                           Node: OCALA  Process name:  "MALIK"
   
 Process Quotas:
 Account name: VMS     
  CPU limit:                      Infinite  Direct I/O limit:       6
  Buffered I/O byte count quota:     17904  Buffered I/O limit:     6
  Timer queue entry quota:              10  Open file quota:       31
  Paging file quota:                 24945  Subprocess quota:       8
  Default page fault cluster:           64  AST limit:             14
  Enqueue quota:                        30  Shared file limit:      9
  Max detached processes:               11  Max active jobs:       14
 
      

The SHOW PROCESS command in this example displays the available quotas and limits. The value under Paging file quota is rendered in pagelets on Alpha.

#5

$ SHOW PROCESS/SUBPROCESSES
 
 14-DEC-2001 15:44:59.39  User: MALIK  Process ID:   28200364
                          Node: OCALA  Process name: "MALIK_1"
 
 Processes in this tree:
 
 MALIK
   MALIK_1 (*)
     MALIK_2
 
      

The SHOW PROCESS command in this example shows the current process tree. The current process is indicated by the asterisk (*). Processes both below and above the current process are shown.

#6

$ SHOW PROCESS/CONTINUOUS BOB
 
                           Process BOB                       12:26:53
   
   
   
    State               CUR              Working set              269
   
    Cur/base priority   8/4              Virtual memory          1713
   
    Current PC          7FFEE07E         CPU time         00:00:13.82
   
    Current PSL         03C00000         Direct I/O               246
   
    Current user SP     7FF785A4         Buffered I/O             646
                                                                
    PID                 226006C0         Page faults             3417
                                                                
    UIC                 [VMS,BOB]        Event flags         C8000007
                                                             C0000000
    SYS$SYSROOT:[SYSEXE]SHOW.EXE
 
      

In this example, the /CONTINUOUS qualifier causes the display of information about process BOB to be updated continuously. Note that the Virtual pages heading appears on Alpha indicating the virtual memory used as a number of CPU-specific pages. The value displayed for Working set is also a number of CPU-specific pages.

#7

$ SHOW PROCESS/CONTINUOUS CIMSERVER
 
                             Process CIMSERVER                    07:38:02 
 
 
 
    State               LEF                 Working set               2599 
 
    Cur/base priority   9/4                 Virtual pages            15135 
 
    Current PC          8065BDC0            CPU time         0 00:00:14.33 
 
    Current PSL         00000000            Direct I/O                5889 
 
    Current user SP     7ACE6680            Buffered I/O             88641 
 
    PID                 20200822            Page faults               1487 
 
    UIC                 [SYSTEM]            Event flags           C0000001 
                                                                  80000000 
 
    $1$DGA02:[SYS0.SYSCOMMON.][WBEM_SERVICES]CIMSERVER.EXE;1 
 
 
[Press Q key] 
 
                             Process CIMSERVER                    07:38:18 
  
    State               LEF                 Working set               2599 
 
    PID                 20200822            Page faults               1487 
 
    UIC                 [SYSTEM]            Event flags           C0000001 
                                                                  80000000 
 
    # open files remaining               125/128                  ( 97%) 
    Direct I/O count/limit               100/100                  (100%) 
    Buffered I/O count/limit              99/100                  ( 99%) 
    BUFIO byte count/limit            251840/251840               (100%) 
    ASTs remaining                        98/100                  ( 98%) 
    Timer entries remaining               15/16                   ( 93%) 
    PGFL quota count/limit             42408/43750                ( 96%) 
    ENQ quota count/limit               2048/2048                 (100%) 
 
    $1$DGA02:[SYS0.SYSCOMMON.][WBEM_SERVICES]CIMSERVER.EXE;1 
 
      

In this example, the standard continuous display is interrupted when the Q key is pressed. The display then dynamically changes to show the quotas in two columns: one column with the actual counts and another with percentages.

#8

$ SHOW PROCESS/MEMORY
 
 14-DEC-2001 14:59:04.48   User: MALIK  Process ID:   28200364
                           Node: OCALA  Process Name: "MALIK" 
  
 Process Dynamic Memory Area  
     Current Size (bytes)    25600   Current Total Size (pages)    50
     Free Space (bytes)      22698   Space in Use (bytes)        2902
     Size of Largest Block   22496   Size of Smallest Block        15
     Number of Free Blocks       7   Free Blocks LEQU 32 Bytes      3
 
      

The SHOW PROCESS command in this example displays the use of dynamic memory areas for the current process, MALIK. These areas are described as follows:
Current size Displays the current size in bytes and pagelets on Alpha of each dynamic memory area.
Free space Displays the amount of free space in each dynamic memory area.
Space in use Displays the amount of space currently allocated from each area.
Largest block Displays the size of the largest contiguous area in each pool area.
Smallest block Displays the size of the smallest free block in each pool area.
Free blocks Displays the total number of free blocks in each pool area. The size of this number is a measure of pool fragmentation.
Blocks LEQU 32 Blocks LEQU 64 (Alpha) Displays the number of free blocks that are 32 bytes or 64 bytes or shorter on Alpha. This number is another measure of pool fragmentation, because while allocation of these small blocks is unlikely, they contribute to the allocation time whenever an allocation request is made.

#9

$ SHOW PROCESS REDSOX::RAMIREZ
 27-OCT-2004 23:40:20.04  User: RAMIREZ   Process ID: 19182004
                          Node: REDSOX    Process name: RAMIREZ            
Terminal:          RTA5:
User identifier:   [VMS,RAMIREZ]
Base  priority:    4
Default file spec: WORK5:[RAMIREZ]
Devices allocated: RTA5:
 
      

The SHOW PROCESS command in this example displays the basic subset of information for the process RAMIREZ on node REDSOX.

#10

$ SHOW PROCESS/SHELVING LYONS
15-JUNE-2001  10:07:25.11   User: LYONS       Process ID:  20206A50
                            Node: BANANA      Process name: "LYONS"
Auto-unshelve: on
 
      

The SHOW PROCESS command in this example shows that the LYONS process automatically unshelves files.

#11

$ SHOW PROCESS/DUMP RALSTON
31-DEC-2001 10:38:32.48   User: RALSTON       Process ID:   20C0011B
                          Node: AAAAAA        Process name: "_RTA1:"
Image Dump: on
      

The SHOW PROCESS command in this example shows that the image dump capability for the RALSTON process is enabled. This causes the contents of the address space to be written to the file named SYS$LOGIN:(image-name).DMP (where the image name is the same as the file name) when an image terminates due to an unhandled error.

See the SET PROCESS/DUMP command for additional information.

#12

$ SHOW/SYMLINK
 
$ 17-SEP-2009 05:31:34.92   User: SYSTEM           Process ID:   20A0045C 
                          Node: LENOX1           Process name: "SYSTEM" 
 
Symlink search mode: No wildcard
 
      

This example shows that wildcard is not used for symlink search.


Previous Next Contents Index