Document revision date: 4 May 2001

This appendix shows sample installations of DECdfs client and server software on the following systems:

• Client-only installation on OpenVMS VAX Version 5.5-2 with DECnet-VAX
• Server installation on OpenVMS Alpha Version 7.1-1H2 with DECnet-Plus

The following sample dialogue shows a typical installation of DECdfs client software on OpenVMS VAX Version 5.5-2 with DECnet-VAX.

$ @sys$update:vmsinstal VAX/VMS Software Product Installation Procedure V5.5-2 It is 27-OCT-1998 at 11:23. Enter a question mark (?) at any time for help. * Are you satisfied with the backup of your system disk [YES]? * Where will the distribution volumes be mounted: dua0:[kit] Enter the products to be processed from the first distribution volume set. * Products: DECDFS01023 * Enter installation options you wish to use (none): The following products will be processed: DECDFS01 V2.3 Beginning installation of DECDFS01 V2.3 at 11:24 %VMSINSTAL-I-RESTORE, Restoring product save set A ... %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. * Do you want to run the IVP after the installation [YES]? * Do you want to purge files replaced by this installation [YES]? Current configuration: OpenVMS VAX V5.5-2 - DECnet Phase IV * Install the DFS files that support this configuration? [YES]? * Do you want to install the DECDFS01 V2.3 SERVER software on this node [YES]? no Product: DFS-CLIENT Producer: DEC Version: 2.0 Release Date: 20-JUN-1994 * Does this product have an authorization key registered and loaded? yes Installation will be complete in approximately 1 - 5 minutes depending upon your configuration. There are no more questions unless you chose to run the IVP. Installing DECdfs software . . . %VMSINSTAL-I-RESTORE, Restoring product save set B ... The following line should be added to your SYSTARTUP command file to automatically start DFS at system startup time: "@SYS$STARTUP:DFS$STARTUP.COM" Put DFS$STARTUP after the statement that invokes the DECnet start-up command file (STARTNET.COM). The DECnet software must be started before the DECdfs software. Before starting DECdfs . . . * You must execute SYS$STARTUP:DNS$CHANGE_DEF_FILE.COM. Since DECdfs is not being started, we cannot run the Installation Verification Procedure (IVP). A copy of DFS$IVP.COM is in the SYS$TEST directory, so you can run the IVP after you start DECdfs. %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... Installation of DECDFS01 V2.3 completed at 11:28 Enter the products to be processed from the next distribution volume set. * Products: Exit VMSINSTAL procedure done at 11:28 $ @SYS$STARTUP:DNS$CHANGE_DEF_FILE.COM Name of DNS server node? MURZIM %COPY-S-COPIED, MURZIM::SYS$SYSROOT:[SYSLIB]DNS$NS_DEF_FILE.DAT;3 copied to SYS$ COMMON:[SYSEXE]DNS$DEFAULT_FILE.DAT;1 (1 block) %SYSTEM-W-NONEXPR, nonexistent process %INSTALL-W-FAIL, failed to REMOVE entry for DISK$VAXVMSV055:<SYS0.SYSCOMMON.SYSL IB>DNS$CLIENT.EXE -INSTALL-E-NOKFEFND, Known File Entry not found %INSTALL-W-FAIL, failed to REMOVE entry for DISK$VAXVMSV055:<SYS0.SYSCOMMON.SYSL IB>DNS$RTL.EXE -INSTALL-E-NOKFEFND, Known File Entry not found %RUN-S-PROC_ID, identification of created process is 00000052 $ $ $ @SYS$STARTUP:DFS$STARTUP % DECdfs starting up... % DECdfs startup completed. $ $ $ @SYS$TEST:DFS$IVP ************************************************************************** *** *** *** DECdfs V2.3-1 *** *** *** *** Distributed File Service *** *** *** *** Installation Verification Procedure *** *** *** ************************************************************************** COPYRIGHT (C) 1987, 1988, 1989, 1992, 1994, 1998 Compaq Computer Corporation. ALL RIGHTS RESERVED. Compaq registered in U.S. Patent and Trademark Office. Confidential computer software. Valid License from Compaq required for possession, use or copying. Consistent with FAR 12.211 and 12.212. Commerical Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. ************************************************************************** This system will run as a DECdfs Client. To verify the installation, you must supply the name of an access point now being served by a DFS server node. This node and username should have proxy access to the file service named by the access point. * Enter an Access Point name [] ? DFSTEST:.MURZIM_SYS * Enter the node which serves this access point [] : MURZIM $ DFSCP MOUNT DFSTEST:.MURZIM_SYS DFS$IVP_DISK %MOUNT-I-MOUNTED, DFSTEST:.MURZIM_SYS mounted on _DFSC1001: If available, enter the specification for an accessible directory within the filesystem identified by this access point, e.g. [JONES]. A read access on the directory will be tested. If a valid proxy does not exist on the server for this node and user, a protection violation will be reported, but that will not terminate the IVP. If you enter a null specification, the read access will not be attempted. * Enter directory specification: [000000] Directory DFS$IVP_DISK:[000000] 000000.DIR;1 BACKUP.SYS;1 BADBLK.SYS;1 BADLOG.SYS;1 BITMAP.SYS;1 CONTIN.SYS;1 CORIMG.SYS;1 DFSTEST.DIR;1 DNS$SERVER.DIR;1 INDEXF.SYS;1 SECURITY.SYS;1 SYS0.DIR;1 SYSEXE.DIR;1 UCX$FTP.DIR;1 UCX$REXEC.DIR;1 UCX$RSH.DIR;1 USER.DIR;1 VMS$COMMON.DIR;1 VOLSET.SYS;1 Total of 31 files. % Directory access was successful. $ DFSCP DISMOUNT DFS$IVP_DISK %DFS-S-DISMNT_SUCCESS, Dismount was successfully performed ******************************************************************************** DECdfs V2.3-1 IVP Successful ******************************************************************************** $

B.2 Server Installation on OpenVMS Alpha Version 7.1-1H2 with DECnet-Plus

$ @sys$update:vmsinstal.com OpenVMS AXP Software Product Installation Procedure V7.1-1H2 It is 29-OCT-1998 at 08:47. Enter a question mark (?) at any time for help. * Are you satisfied with the backup of your system disk [YES]? * Where will the distribution volumes be mounted: dka0:[kit] Enter the products to be processed from the first distribution volume set. * Products: DECDFS01023 * Enter installation options you wish to use (none): The following products will be processed: DECDFS01 V2.3 Beginning installation of DECDFS01 V2.3 at 08:47 %VMSINSTAL-I-RESTORE, Restoring product save set A ... %VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP. * Do you want to run the IVP after the installation [YES]? * Do you want to purge files replaced by this installation [YES]? Current configuration: OpenVMS Alpha V7.1-1H2 - DECnet-Plus * Install the DFS files that support this configuration? [YES]? * Install DFS Help Message file [YES]? Add SYS$HELP:DFS.MSGHLP$DATA to the searchlist defined by MSGHLP$LIBRARY in order to include the DFS messages in your HELP/MESSAGE search. Please refer to the OpenVMS SYSTEM MANAGER'S MANUAL: ESSENTIALS for more information. * Do you want to install the DECDFS01 V2.3 SERVER software on this node [YES]? Product: DFS Producer: DEC Version: 2.0 Release Date: 20-JUN-1994 * Does this product have an authorization key registered and loaded? YES Installation will be complete in approximately 1 - 5 minutes depending upon your configuration. There are no more questions unless you chose to run the IVP. Installing DECdfs software . . . %VMSINSTAL-I-RESTORE, Restoring product save set G ... The following line should be added to your SYSTARTUP command file to automatically start DFS at system startup time: "@SYS$STARTUP:DFS$STARTUP.COM" %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories... % DECdfs starting up... Node 0 Session Control Application DFS$COM_ACP at 1998-10-29-08:49:09.654-07:00I9.254 Characteristics Node Synonym = True % DECdfs startup completed. The Installation Verification Procedure will now be run. Please review preceeding messages and take note of post-installation actions that may be required (such as editing the SYSTARTUP procedure). Begin the DECdfs IVP? [YES] ************************************************************************** *** *** *** DECdfs V2.3-1 *** *** *** *** Distributed File Service *** *** *** *** Installation Verification Procedure *** *** *** ************************************************************************** COPYRIGHT (C) 1987, 1988, 1989, 1992, 1994, 1998 Compaq Computer Corporation. ALL RIGHTS RESERVED. Compaq Registered in U.S. Patent and Trademark Office. Confidential computer software, Valid license required for possession, use or copying. Consistent with FAR 12.211 and 12.212. Commercial Computer Software, Computer Software Documentation, and Technical Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. ************************************************************************** This system will run as a DECdfs Server. To verify the installation, an Access Point must be ADDed on the Server. This procedure creates an Access Point for its own use. You must supply a name for this Access Point that does not already exist and is consistent with the DECdns naming policy used in your network. * Enter an Access Point name [] ? DFSTEST:.IVP_TEST $ DFSCP ADD ACCESS_POINT DFSTEST:.IVP_TEST SYS$SYSDEVICE:[000000] $ DFSCP MOUNT DFSTEST:.IVP_TEST DFS$IVP_DISK %MOUNT-I-MOUNTED, DFSTEST:.IVP_TEST mounted on _DFSC1001: Directory DFS$IVP_DISK:[000000] 000000.DIR;1 BACKUP.SYS;1 BADBLK.SYS;1 BADLOG.SYS;1 BITMAP.SYS;1 CONTIN.SYS;1 CORIMG.SYS;1 DFSTEST.DIR;1 INDEXF.SYS;1 KIT.DIR;1 SECURITY.SYS;1 SYS0.DIR;1 VMS$COMMON.DIR;1 VOLSET.SYS;1 Total of 16 files. % Directory access was successful. $ DFSCP DISMOUNT DFS$IVP_DISK %DFS-S-DISMNT_SUCCESS, Dismount was successfully performed $ DFSCP REMOVE ACCESS_POINT DFSTEST:.IVP_TEST ******************************************************************************** DECdfs V2.3-1 IVP Successful ******************************************************************************** Installation of DECDFS01 V2.3 completed at 08:49 Adding history entry in VMI$ROOT:[SYSUPD]VMSINSTAL.HISTORY Creating installation data file: VMI$ROOT:[SYSUPD]DECDFS01023.VMI_DATA Enter the products to be processed from the next distribution volume set. * Products: Exit VMSINSTAL procedure done at 08:50

	privacy and legal statement
6547PRO_005.HTML