Storage Library System for
OpenVMS

Command Reference Guide
 
 
Abstract

This document describes the STORAGE command syntax of the Storage Library System for OpenVMS software.

 

Revision/Update Information

This revised document supersedes the previous release of this document

Software Version

Storage Library System for OpenVMS
Version 2.9J

January 2005

© 2005 Hewlett-Packard Development Companty, L.P

 

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

 

Proprietary computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

 

Printed in the U.S.A.

Preface vii
1 DCL STORAGE Commands

STORAGE ADD DRIVE 1-2

STORAGE ADD MAGAZINE 1-3

STORAGE ADD VOLUME 1-4

STORAGE ALLOCATE 1-9

STORAGE APPEND 1-13

STORAGE BIND 1-17

STORAGE CREATE LABEL 1-18

STORAGE DEALLOCATE 1-19

STORAGE EXPORT ACS 1-21

STORAGE EXPORT CARTRIDGE 1-23

STORAGE EXPORT MAGAZINE 1-24

STORAGE IMPORT ACS 1-25

STORAGE IMPORT CARTRIDGE 1-27

STORAGE IMPORT MAGAZINE 1-29

STORAGE INVENTORY ACS 1-30

STORAGE INVENTORY JUKEBOX 1-32

STORAGE LABEL 1-34

STORAGE LOAD 1-35

STORAGE RELEASE 1-37

STORAGE REMOVE DRIVE 1-38

STORAGE REMOVE MAGAZINE 1-39

STORAGE REMOVE VOLUME 1-40

STORAGE REPORT FILE 1-41

STORAGE REPORT SLOT 1-44

STORAGE REPORT SYSTEM 1-46

STORAGE REPORT VOLUME 1-49

STORAGE REQUEUE 1-54

STORAGE RESTORE 1-55

STORAGE SAVE 1-60

STORAGE SELECT 1-68

STORAGE SET VOLUME 1-71

STORAGE SHOW JUKEBOX 1-78

STORAGE SHOW LAST_ALLOCATED 1-79

STORAGE SHOW MAGAZINE 1-80

STORAGE SHOW VOLUME 1-82

STORAGE SPLIT 1-85

STORAGE STARTUP SYSTEM_BACKUP 1-87

STORAGE UNBIND 1-88

STORAGE UNLOAD DRIVE 1-89

STORAGE UNLOAD VOLUME 1-90

Tables

Table 1-1 Field Parameters 49

Table 1-2 Required Privileges to Modify Volumes 72

Preface

Purpose of This Document

This document contains information about Storage Library System for OpenVMS ? Version 2.9J software STORAGE command syntax.

Intended Audience

This manual is intended for users of SLS software, including storage administrators, operators, and users.

Related Documents

The following documents are related to this documentation set or are mentioned in this manual:

Conventions

The following conventions are used in this document:

Convention

Description

{}

In format command descriptions, braces indicate required elements.

You must include one of the elements.

[ ]

Square brackets show optional elements in command syntax. You can omit these elements if you wish to use the default response.

. . .

Horizontal ellipsis points indicate the omission of information from a sentence or paragraph that is not important to the topic being discussed.

.

.

.

Vertical ellipsis points indicate the omission of information from an example or command format. The information has been omitted because it is not important to the topic being discussed.

boldface type

Boldface type in text indicates the first instance of a term defined in the Glossary or defined in text.

italic type

Italic type emphasizes important information, indicates variables, indicates complete titles of manuals, and indicates parameters for system information.

Starting test ...

This type font denotes system response, user input, and examples.

Ctrl/x

Hold down the key labeled Ctrl (Control) and the specified key simultaneously (such as Ctrl/Z).

PF1 x

The key sequence PF1 x instructs you to press and release the PF1 key, and then press and release another key (indicated here by x).

n

A lowercase n denotes the generic use of a number. For example, 19nn indicates a four-digit number in which the last two digits are unknown.

x

A lowercase x denotes the generic use of a letter. For example, xxx indicates any combination of three alphabetic characters.

Related Products

The following related products may be mentioned in this document:

Product

Description

ABS

ABS refers to Archive Backup System for OpenVMS? software.

ABS OMT

ABS OMT refers to Archive/Backup System for OpenVMS Management Tools? software.

HSM

HSM refers to Hierarchical Storage Management for OpenVMS software.

MDMS

MDMS refers to Media and Device Management Services for OpenVMS software.

OpenVMS

OpenVMS refers to OpenVMS operating system.

SMF

SMF refers to Sequential Media Filesystem for OpenVMS software.

SLS

SLS refers to Storage Library System for OpenVMS software.

Determining and Reporting Problems

If you encounter a problem while using SLS, report it to HP through your usual support channels.

Review the Software Product Description (SPD) and Warranty Addendum for an explanation of warranty. If you encounter a problem during the warranty period, report the problem as indicated above or follow alternate instructions provided by HP for reporting SPD non-conformance problems.

 

DCL STORAGE Commands

SLS STORAGE commands control backup and restore behavior, and for media and device management behavior.

STORAGE ADD DRIVE

The STORAGE ADD DRIVE command returns a drive to the pool of available drives for use by the MDMS software if the drive has been removed with the STORAGE REMOVE command.

Format

$ STORAGE ADD DRIVE drive-name

Description

The STORAGE ADD DRIVE and STORAGE REMOVE DRIVE commands only work with drives specified in the ALLDEV parameter in the file TAPESTART.COM for use by MDMS software.

This command is not used to add additional drives, but instead to return a drive to the pool after it is removed with the STORAGE REMOVE DRIVE command. After a drive is returned, it becomes available for any STORAGE SELECT request.

Restrictions

Parameters

drive-name

Specifies the name of the drive that is to be set available for use by MDMS software. Use a physical device name or logical name to identify the drive.

Qualifiers

None

Examples

The following examples illustrate the STORAGE ADD DRIVE command. It is assumed that these drives were made unavailable with the STORAGE REMOVE DRIVE command.

  1. $ STORAGE ADD DRIVE WRITE1

    Adds the drive WRITE1 to the pool of drives currently available. WRITE1 is the logical name of the drive.
  2. $ STORAGE ADD DRIVE MUA0:

    Adds the drive MUA0: to the pool of drives currently available. MUA0: is the physical device name of the drive.

STORAGE ADD MAGAZINE

The STORAGE ADD MAGAZINE command adds a magazine name to the MDMS magazine database.

Format

$ STORAGE ADD MAGAZINE magazine_name

Parameters

magazine_name

The ASCII character name associated with the magazine. The name can be up to 8 characters in length.

Restrictions

The command requires the OPER privilege.

Qualifiers

/SLOTS=number

Specifies the number of slots in the magazine. The user must know what this value is. Valid range is 1-40. The /SLOTS qualifier is required.

Examples

$ STORAGE ADD MAGAZINE MYMAGA01/SLOTS=11

Adds the 11-slot magazine named MYMAGA01 to the MDMS magazine database.

STORAGE ADD VOLUME

The STORAGE ADD VOLUME command places a new volume record with the specified attributes into the MDMS volume database. To ensure the volume refers to the appropriate media type, use the /MEDIA_TYPE qualifier. This command allows you to add two volumes per media for double-sided media.

Formats

$ STORAGE ADD VOLUME volume_id

$ STORAGE ADD VOLUME/SIDE=A volume-id

$ STORAGE ADD VOLUME/SIDE=DOUBLE volume-id-a volume-id-b

$ STORAGE ADD VOLUME/SIDE=B volume-id-a volume-id-b

Deciding Which Format to Use

Use the STORAGE ADD VOLUME command to add both single-sided and double-sided volumes to the MDMS volume database.

IF you want to add . . .

THEN . . .

a single-sided use volume

use Format 1.

Side A of a double-sided volume

use Format 1 or Format 2.

both sides of a double-sided volume at the same time media when

use Format 3.

The /SIDE=DOUBLE qualifier is required when adding both sides of a double-sided volume and it must precede the parameters.

Side B of double-sided Side A already exists

use Format 4.

The /SIDE=B qualifier is required when adding only Side B and must precede the parameters.

Restrictions

Parameters

volume-id

Specifies the Volume ID for single-sided media, such as magnetic tape. Specifies the Volume ID for Side A of double-sided media.

This parameter is required.

volume-id-b

Specifies the Volume ID of Side B for double-sided media. If this parameter is specified, then it must be preceded by the Volume ID of Side A of the same volume.

Qualifiers

/ACCOUNT=string

Specifies the string to be used as the account name of a volume. Use 1 to 8 characters.

/ALLOCATED=date

Specifies the date when the volume was allocated for use by the user, system backup, or archive. Use the format for absolute time: [dd-mmm-yyyy[:][hh:mm:ss.cc].

/BLOCK_FACTOR=number

Specifies the number of records in each physical block on the volume.

This qualifier is valid only for volumes formatted with the /FORMAT=EBCDIC qualifier.

/BRAND=text

Specifies the volume manufacturer, such as Digital. Use 1 to 16 characters.

/CLEANED=date

Specifies the date the volume was last cleaned. Use the format for absolute time: [dd-mmm-yyyy[:][hh:mm:ss.cc]. The default is the current date and time.

/DENSITY=value

Specifies either the density (in bpi) for tape volumes or the data compaction and record blocking option for TK90K cartridges. The meaning of this parameter depends upon the type of drive being used.

IMPORTANT: Note that the /DENSITY qualifier should be used when you have to specify a change in the kind of media. You should NOT specify /DENSITY as a selection criterion.

IF the volume is being loaded onto . . .

THEN use this qualifier . . .

a TA90 or TA90E cartridge system

/MEDIA_TYPE=keyword

all other devices

/DENSITY=keyword

Examples:

1600 bpi, 6250 bpi, COMP, NOCOMP

Do not use this qualifier if the recording density does not apply to media at your site.

/FORMAT=keyword

Specifies in what format to write the volume. The allowed values are:

/FREED=date

Specifies the date on which an allocated volume entered the Transition state. Use the format for absolute time: [dd-mmm-yyyy[:][hh:mm:ss.cc]. The default is the current date and time. The MDMS software automatically updates this field when the volume changes state.

/INITIALIZED=date

Specifies the initialization date of a volume. Use the format for absolute time: [dd-mmm-yyyy[:][hh:mm:ss.cc]. The default is the current date and time.

/IO_ERROR=number

Specifies the error count on a volume. The default is zero. The MDMS software automatically updates this field when I/O errors occur for the drives on which the volume is mounted.

/JOB_NAME=name

Specifies the job name in which this volume is to be used. Use 1 to 10 characters. Normally, the MDMS software loads this field.

/LAST_ACCESS=date

Specifies the date a volume was last accessed. Use the format for absolute time: [dd-mmm-yyyy[:][hh:mm:ss.cc]. The MDMS software automatically updates this field when the volume is accessed.

/LENGTH=number

/NOLENGTH

Specifies the volume length for a 9-track tape media.

WHEN the media is . . .

THEN . . .

ELSE . . .

a 9-track tape

specify the /LENGTH qualifier and enter the length of the tape

the length defaults to zero.

optical, TK50K, TK52K, TK85K, and so forth

specify the /NOLENGTH qualifier

 

It is recommended that you specify the length qualifier when you add a 9-track tape to ensure correct estimated tape capacity.

/LOCATION=text

Specifies the location of a volume, such as HEADQUARTERS. Use 1 to 16 characters. The MDMS software automatically updates this field if the volume is moved to or from an off-site vault. The default location is site-specific.

/MEDIA_TYPE=type

Specifies the type of media; valid media type values are defined as media triplets in the file SYS$MANAGER:TAPESTART.COM.

Examples:

9TRACK, TK50, RV02K.

/MOUNT_COUNT=number

Specifies the mount count on a volume. The MDMS software automatically updates this field each time a volume is mounted. The default is zero (0).

/NOTES=text

Specifies the notes field of a volume. Use 1 to 64 characters.

If spaces are desired in this field, the text must be enclosed within quotation marks.

/OFFSITE=date

Specifies the date a volume is to be sent off site. Use the absolute time format: [dd-mmm-yyyy][:][hh:mm:ss.cc].

/ONSITE=date

Specifies the date a volume is to return on site. Use the absolute time format: [dd-mmm-yyyy[:][hh:mm:ss.cc].

/POOL=poolname

Specifies the volume pool name to which the volume is to be added. Use 1 to 12 characters. Spaces are not allowed in the pool name.

/PROTECTION=code

Specifies the protection code of the volume record. Use the standard OpenVMS protection code format. The default protection code is site-specific.

/PURCHASED=date

Specifies the purchase date of a volume. Use the format for absolute time: [dd-mmm-yyyy[:][hh:mm:ss.cc]. The default is the current date and time.

/RECLENGTH=number

Specifies the record length in bytes. The record length is important for EBCDIC formatted volumes. This qualifier is valid only when used with /FORMAT=EBCDIC. The default is zero (0) and cannot be less than zero (0).

/SCRATCH_DATE=date

Specifies the date that the volume is deallocated and placed into either the transition or free state. The MDMS software automatically updates this field when the volume is allocated.

The default scratch date is site-specific.

/SIDE=keyword

Indicates whether one or both volumes of a double-sided media are being added. The /SIDE qualifier is used in combination with the command parameters as indicated by the syntax format. Note the following restrictions:

/SLOT=text

Specifies the slot where a volume is stored. The storage slot location must be defined in the slot database. Use 1 to 8 characters. This is not a jukebox slot number.

/TIMES_CLEANED=number

Specifies the number of times the volume has been cleaned. The default is zero (0).

/USER_NAME=user-name

Specifies the user to whom the volume is allocated or was last allocated. The MDMS software automatically updates this field when a volume is allocated. The user's name and UIC must exist on the system where the command is entered.

Examples

  1. $ STORAGE ADD VOLUME TEST01/MEDIA_TYPE=9TRACK /LENGTH=2400
    Adds the volume TEST01 to the MDMS database, and specifies that the volume is 9-track media with a length of 2400. All other fields in the MDMS database are given the default values.
  2. $ STORAGE ADD VOLUME LAB001/BRAND=DIGITAL /LOCATION=HEADQUARTERS/NOLENGTH
    Adds the volume LAB001 to the MDMS database and specifies that the volume is:

    a. A Digital volume
    b. Located at the site designated as HEADQUARTERS
  3. $ STORAGE ADD VOLUME/SIDE=DOUBLE VOL01 VOL02/MEDIA_ TYPE=RV02K/NOLENGTH
    Adds both Side A (VOL01) and Side B (VOL02) of a double- sided media at the same time.
  4. $ STORAGE ADD VOLUME/SIDE=A VOL01/MEDIA_TYPE=RV02K /NOLENGTH $ STORAGE ADD VOLUME/SIDE=B VOL01 VOL02
    Adds both Side A and Side B of a double-sided volume. The first command line:
  5. Adds Side A
  6. Assigns VOL01 as the volume ID
  7. Specifies optical media
  8. Specifies no length is needed

The second command line:

STORAGE ALLOCATE

The STORAGE ALLOCATE command assigns volumes to the user name of the requesting process.

The ALLOCATE command assigns volumes that are available for use in the SLS database to the user name of the requesting process. These volumes may or may not have been previously freed before they are allocated for use. This command automatically performs a STORAGE SHOW VOLUME command and displays information about the allocated volume when it completes.

The /VOLUME qualifier allocates a specified volume if it is in the free state. If the /VOLUME qualifier is not specified, a volume is selected in the free state based on the following selection criteria and in the following order:

If these attributes are not defined, the associated qualifier's default value, which is site-specific, is used.

Format

$ STORAGE ALLOCATE media-type

Description

The STORAGE ALLOCATE command:

Parameters

media-type

Specifies the type of media to allocate (for example, a 9- track or TK50). Valid media-type values are site-dependent.

Qualifiers

/APPEND=volume-id

Allocates and appends a volume to the end of an allocated volume or volume set. With this qualifier, a volume set is specified by naming any of the members of the volume set.

/BLOCK_FACTOR=number

Specifies the number of records in each physical block on the volume. The MDMS software automatically updates the volume record.

This qualifier is valid only for volumes formatted with the /FORMAT=EBCDIC qualifier.

/DENSITY=value

Specifies either the density (in bpi) for tape volumes or the data compaction and record blocking option for TK90K cartridges. The meaning of this parameter depends upon the type of drive being used.

IMPORTANT: Note that the /DENSITY qualifier should be used when you have to specify a change in the kind of media. You should NOT specify /DENSITY as a selection criterion.

IF the volume is being loaded onto . . .

THEN use this qualifier . . .

a TA90 or TA90E cartridge system

/MEDIA_TYPE=keyword

all other devices

/DENSITY=keyword

Examples:

1600 bpi, 6250 bpi, COMP, NOCOMP

Use this qualifier when the density (or data compaction) of the volume is going to be changed.

Do not use this qualifier if the recording density does not apply to media at your site.

/FORMAT=keyword

Specifies in what format to write the volume. The allowed values are:

/LABEL (default)

/NOLABEL

Generates a printable label for the volume when it is allocated. /NOLABEL specifies not to generate a printable label.

/LENGTH=number

/NOLENGTH

Specifies to allocate a volume with a tape length greater than or equal to the designated number. By default, a volume is selected for allocation with a tape length of 2400 or greater. Allowed values are site-specific.

The /LENGTH qualifier has the same function as the /SIZE qualifier.

WHEN the media is . . .

THEN . . .

ELSE . . .

a 9-track tape

specify the /LENGTH qualifier and enter the length of the tape

the length defaults to zero.

optical, TK50K,TK52K, TK85K,and so forth

specify the /NOLENGTH qualifier.

-

It is recommended that you specify the length qualifier when you allocate a 9-track tape to ensure correct estimated tape capacity.

/LOCATION=text

Specifies the location in which to look for the volume, such as HEADQUARTERS. The default is the current site.

/LOG (default)

/NOLOG

Automatically performs a STORAGE SHOW VOLUME command of the allocated volume to display the volume information on the terminal screen. The /NOLOG qualifier is used to suppress the display.

/NOTES=text

Specifies the Notes field of a volume. Use 1 to 64 characters.

If spaces are desired in this field, the text must be enclosed within quotation marks.

/POOL=poolname

Specifies the volume pool from which the volume is to be allocated. Use 1 to 12 characters. Spaces are not allowed in the pool name.

WHEN the volume poolname . . .

THEN . . .

is not specified

the volume is allocated from either one of:

  • The user's default pool
  • The system default pool

is specified

  • IF the user is authorized to access the volume pool,
  • THEN the volume is allocated from the specified pool,
  • ELSE an error occurs.

/QUANTITY=number

Specifies the number of volumes to allocate. Use this qualifier to allocate a group of volumes as a volume set. If you do not allocate volumes as a volume set, then you must perform a separate STORAGE ALLOCATE command for each volume. The default number is 1.

/RECLENGTH=number

Sets the record length for volumes. This qualifier is valid only when used with /FORMAT=EBCDIC. The default is zero (0) and cannot be less than zero (0).

/SCRATCH_DATE=date

Specifies the time the volume is deallocated and placed into either the transition or the free state. The MDMS software automatically updates this field when the volume is allocated.

The values allowed for this qualifier are site-specific. The default scratch date is one year from the current date. The default retention period for a volume in transition is two weeks. Allowed retention periods are also site- specific.

This requires the privilege assigned to PRIV_MAXSCR in the TAPESTART.COM file to override the default scratch date.

/USER_NAME=user-name

Specifies the user to whom the volume is being allocated. The MDMS software automatically updates this field when a volume is allocated. The user's name and UIC must exist on the system where the command is entered.

Requirements:

/VOLUME=volume-id

Specifies a volume to allocate. The volume must be in the free state. Using the /VOLUME qualifier ignores the following selection qualifiers and parameter:

Examples

  1. $ STORAGE ALLOCATE/QUANTITY=3 9TRACK/DENSITY=1600
    Volume: TEST3 Owner: VENUS::SMITH
    .
    .
    .
    Volume: TEST4 Owner: VENUS::SMITH
    .
    .
    .
    Volume: TEST5 Owner: VENUS::SMITH

    Allocates three 9-track tapes to the user as a volume set with the density of 1600 bpi or greater. Information on the volume set is displayed after the volumes are allocated.
  2. $ STORAGE ALLOCATE TK50/FORMAT=ASCII/APPEND=TEST01 /NOLABEL

    This command:
    a. Allocates a TK50 cartridge
    b. Specifies ASCII format
    c. Appends the allocated volume to the end of TEST01, where TEST01 is already allocated and is the same format type
    d. Does not generate a printable label
  3. $ STORAGE ALLOCATE/VOLUME=USER30 TK40/NOTES=MAY-REPORTS /LABEL

    This command:
    a. Allocates a TK50 cartridge called USER30
    b. Specifies the note test as MAY-REPORTS
    c. Generates a printable label for the volume

STORAGE APPEND

The STORAGE APPEND command:

Formats

$ STORAGE APPEND volume-id
$ STORAGE APPEND volume-id-a/VOLUME=volume-id-b

Description

The first format is used to create a volume set or to expand an existing volume set with a single volume that is selected by the MDMS software.

The MDMS software selects a volume from the set of free volumes that match the media type, density, length, location, and pool name of the volume specified by the volume-id parameter. In the new or expanded volume set, the selected volume follows the volume specified by the volume- id parameter. The state of the selected volume changes to allocated.

The second format is used to create a volume set from two single allocated volumes (volume-id-a and volume-id-b), or to expand an existing volume set following volume-id-a with a single volume or volume set volume-id-b.

In the new or expanded volume set, the single volume or volume set volume-id-b follows the volume volume-id-a:

$ STORAGE APPEND volume-id !volume id-a
$ STORAGE APPEND first volume-id/VOLUME=volume-id !volume id-b

Use the following guidelines to determine which format to use with the STORAGE APPEND command:

IF you want to . . .

AND you want . . .

THEN use . . .

append two volumes into a volume set

MDMS to allocate and append a free volume

Format 1:

 

$ STORAGE APPEND volume- - id (first volume)

 

to select an allocated volume to append

Format 2:

 

$ STORAGE APPEND volume- id (first volume)-

_$/VOLUME=volume-id (second volume)

append a volume to the end of an existing volume set

MDMS to allocate and append a free volume

Format 1:

 

$ STORAGE APPEND volume-id

(last volume of the volume set)

 

to select an allocated volume to append

Format 2:

 

$ STORAGE APPEND volume-id

(last volume of the volume set)

insert a volume within an existing volume set

MDMS to allocate and insert a free volume

Format 1:

 

$ STORAGE APPEND volume-id

(volume to be followed)

 

to select an allocated volume to append

Format 2:

 

$ STORAGE APPEND volume-id-

(volume to be followed)

_$/VOLUME=volume- id (volume to insert)

append a volume set to the end of another volume

-

Format 2:

 

$ STORAGE APPEND volume-id-

(last volume of the volume set)

_$/VOLUME=volume- id

(first volume of the second volume set)

insert a volume set wihin another volume set

-

Format 2:

 

$ STORAGE APPEND volume-id-

!volume in the set to be followed

_$/VOLUME=volume-id !first volume of the second volume set

All volumes must be allocated to the requester.

 

IF the volume-id parameter is . . .

THEN the . . .

a single volume or the last volume in a set

volume or volume set that is specified by /VOLUME=appending volume-id qualifier is appended to the volume specified by the first volume ID.

any volume in a volume set (except the last volume)

volume or volume set that is specified by the /VOLUME=appending volume-id qualifier is appended to the volume specified by the first volume-id. This effectively inserts the volume or volume set specified in the appending volume-id into the volume set, after the volume specified in the first volume-id.

Restrictions

Parameters

volume-id

Specifies a single volume or member of a volume set that will be followed by the appended volume or volume set.

The specified volume or volume set must be in the allocated state.

Qualifiers

/USER_NAME=user-name

Specifies the OpenVMS user name. Performs a STORAGE APPEND command on behalf of a user and allocates the volumes to the specified user.

/VOLUME=volume-id

Specifies the name of an allocated volume or the first member of a volume set to be appended to the volume or volume set specified by the volume-id parameter.

To determine the volume ID of the first member of a volume set:

If a volume is a member of a volume set, the STORAGE SHOW VOLUME command displays all the members of the volume set in sequence. Use the following format to enter the first volume ID shown in the report:

$ STORAGE SHOW VOLUME volume-id

Examples

  1. $ STORAGE APPEND TEST5/VOLUME=TEST6
    Allocates and appends volume TEST6 to TEST5. The volume set consists of TEST5 and TEST6 with TEST5 being the first volume in the set.

  2. $ STORAGE ALLOCATE 9TRACK/VOLUME=PLAN1 (1)
    $ STORAGE ALLOCATE 9TRACK/VOLUME=PLAN2
    $ STORAGE ALLOCATE 9TRACK/VOLUME=PLAN3
    $ STORAGE ALLOCATE 9TRACK/VOLUME=PLAN4
    $
    $ STORAGE APPEND PLAN1/VOLUME=PLAN2 (2)
    $ STORAGE APPEND PLAN3/VOLUME=PLAN4 (3)
    $
    $ STORAGE APPEND PLAN2/VOLUME=PLAN3 (4)
    $
    $ STORAGE SHOW VOLUME PLAN1 (5)
    PLAN1
    .
    .
    .
    PLAN2
    .
    .
    .
    PLAN3
    .
    .
    .
    PLAN4
    .
    .
    .
    This set of commands performs the following functions:
    (1) The STORAGE ALLOCATE commands allocate four 9-track tapes.

    (2) The first STORAGE APPEND command appends the volume PLAN2 to the volume PLAN1. This creates a volume set PLAN1 with the volume PLAN1 as the first volume in the set.

    (3) The second STORAGE APPEND command appends the volume PLAN4 to the volume PLAN3. This creates a volume set PLAN3 with the volume PLAN3 as the first volume in the volume set.

    (4) The third STORAGE APPEND command appends the volume set PLAN3 to the end of the volume set PLAN1 by using the name of the last volume (PLAN2) in volume set PLAN1. This produces a single new volume set called PLAN1, consisting of all four members.

    (4) The SHOW VOLUME command lists the volumes for volume set PLAN1 in their revised order. It is recommended you use the SHOW VOLUME command prior to appending one volume or volume set to another in order to verify the name of the last volume in the set.

STORAGE BIND

The STORAGE BIND command binds a volume to a slot in the specified magazine.

Format

$ STORAGE BIND volume_id magazine_name

Parameters

volume_id

The volume ID (must exist in the MDMS volume database) that is bound to the specified magazine.

magazine_name

The magazine name (which must exist in the MDMS magazine database) in which the specified volume is bound.

Restrictions

Note that you cannot bind a volume to an imported magazine.

Qualifiers

/SLOT=number

The required position-dependent qualifier specifying the slot in the magazine where the volume is located.

Example

$ STORAGE BIND BCKVOL MYMAGA01 /SLOT=4

This example binds the volume BCKVOL into slot number 4 of the magazine MYMAGA01.

STORAGE CREATE LABEL

The STORAGE CREATE LABEL command closes the current label file and opens a new one. The logical name SLS$LABEL stores the value defined in the LBL parameter in the TAPESTART.COM file.

Format

$ STORAGE CREATE LABEL

Restrictions

Requires the OPER privilege.

Parameters

None.

Qualifiers

None.

Examples

  1. $ SHOW LOGICAL SLS$LABEL
    The software displays LABEL_TEST.TXT as the logical name for SLS$LABEL and a message similar to the following:

    "SLS$LABEL"= USER$1:[SMITH]LABEL_TEST.TXT (LNM$SYTEM_TABLE)
  2. $ DIRECTORY USER$1:[SMITH]LABEL*.*
    The DCL DIRECTORY command shows only one file name, LABEL.TXT. The software displays a message similar to the following:

    DIRECTORY USER$1:[SMITH]
    LABEL.TXT;3
    Total of 1 file.
  3. $ STORAGE CREATE LABEL $ DIRECTORY USER$1:[SMITH]LABEL*.*
    The CREATE LABEL command closes the current label file (SLS$LABEL) and opens a new one. The DCL DIRECTORY command displays a message similar to the following:

    DIRECTORY USER$1:[SMITH]
    LABEL.TXT;4 LABEL.TXT;3
    Total of 2 files.

STORAGE DEALLOCATE

The STORAGE DEALLOCATE command frees a volume or volume set that is currently allocated.

Format

$ STORAGE DEALLOCATE volume-id

Restrictions

The following restrictions apply to the STORAGE DEALLOCATE command.

WHEN you are deallocating . . .

THE use the . . .

a volume set

volume ID of the first volume in the set.

individual volumes from a volume set

/VOLUME qualifier.

Parameters

volume-id

Specifies the volume ID of the volume to be freed. To free a volume set, specify the volume_set_id (the volume ID of the first volume in the volume set).

Description

A deallocated volume is placed in the transition or free state, depending upon the value assigned to the FRESTA parameter in the TAPESTART.COM file.

When a volume changes to the free state, the following fields are updated in the MDMS volume database record:
- Notes -This field is cleared.
- Scratch Date-This field is reset to zero.

/USER_NAME=user-name

Specifies the user's name and deallocates a volume or volume set on behalf of that user.

Using this qualifier requires that:

/VOLUME

Frees only the specified volume from a volume set. Any volumes that are separated as a result of the DEALLOCATE /VOLUME command become independent volumes. For example:

WHEN . . .

THEN . . .

the specified volume is the fourth volume in a four- volume set

this volume is separated from the set.

the specified volume is the third volume in a four-volume set

the third volume is separated from the set and the second volume is set to point to the fourth volume. This becomes a three-volume set.

Examples

  1. $ STORAGE DEALLOCATE/VOLUME VOL8
    Deallocates volume VOL8 from a multivolume set. All other volumes in the set remain allocated.
  2. $ STORAGE DEALLOCATE VOL22
    Deallocates the entire volume set, VOL22. VOL22 is the first volume in the set and all volumes in the set are deallocated and become available to other users.

STORAGE EXPORT ACS

The STORAGE EXPORT ACS command moves a volume or a list of volumes in an ACS to the cartridge access port. Once the STORAGE EXPORT ACS command completes, the status of the volume becomes "outside the jukebox."

Format

$ STORAGE EXPORT ACS volume-id-1 [volume-id-2] [volume-id-3] [volume-id-4] . . . [volume-id-6]

Restrictions

Description

The EXPORT command directs a volume or list of volumes in a jukebox to the access door where it waits to be physically removed. When exporting a list of volumes from the StorageTek ACS, the first ACS library ID found applies to all volumes. For this reason, the volume list should contain volumes only from the same ACS library. A log file is created in SLS$MAINTENANCE_LOGS, on the server, that contains information about the export operation for the StorageTek ACS. The name of the file is pid_EXPORT.LOG, where pid is the process ID of the user requesting the export operation. When a known volume is exported from the jukebox, the following database fields for the volume are updated:

Parameters

volume-id-n

Specifies the standard SLS volume ID. You can supply up to six (6) volume specifications on the command line. These can be either individual volumes or a range of volumes of the form AAA001-AAA040 separated by a hyphen (-) or a combination of both.

For example: $ STORAGE EXPORT/ACS=1 AAA001 AAA019-AAA024 AAA123

The volume labels must be 6 characters each, and the nonnumeric portion of both volume labels must match. For example, the range AAA001-BBB001 is invalid. The maximum total number of volumes allowed is 40. This means that the total number of volumes in each range plus any individual volumes cannot exceed 40 all together.

/ACS=n

Specifies the ACS-id that holds the Cartridge Access Port (CAP) into which the volume is physically injected. ACS-id defaults to zero (0).

/CAP=n

Specifies the cartridge access port-id (CAP) to which the volume is physically injected. Valid values range from zero (0) to two (2). The CAP-id default value is zero (0).

/LSM=n

Specifies the LSM-id that holds the CAP into which the volume is physically injected. The LSM-id default value is zero (0).

Examples

  1. $ STORAGE EXPORT /ACS=1 /CAP=1 /LSM=1 FY1996
    Volume FY1996 is exported to CAP number 1 located in ACS number 1, on LSM number 1.
  2. $ STORAGE EXPORT /ACS=1 /CAP=1 /LSM=1 AAA001-AAA005
    Volumes AAA001, AAA002, AAA003, AAA004 and AAA005 are exported to CAP number 1 located in ACS number 1 on LSM number 1.
  3. $ STORAGE EXPORT /ACS=1 /CAP=1 /LSM=1 AAA001 AAA010- AAA015 AAA045
    Volumes AAA001, AAA010, AAA011, AAA012, AAA013, AAA014, AAA015 and AAA045 are exported to CAP number 1 located in ACS number 1 on LSM number 1.

STORAGE EXPORT CARTRIDGE

The STORAGE EXPORT CARTRIDGE command exports one tape cartridge to the out port of a tape jukebox. The tape jukebox, such as a TL820, must physically have an out port.

Format

$ STORAGE EXPORT CARTRIDGE volume-id

Parameters

volume-id

Specifies the volume ID of the volume being exported.

Description

When the cartridge is exported, the MDMS volume database is updated to mark the volume as outside the jukebox. If the cartridge was also bound to an imported magazine, it will be unbound.

When a cartridge is exported, an OPCOM message is displayed reminding the user to remove the exported cartridge from the out port. No response is required to the system. If the out port is full, the export fails with an error, but the volume remains in its slot.

Qualifiers

None.

Examples

  1. $ STORAGE EXPORT CARTRIDGE DEC002
    %SLS-S-MAGVOLEXPBND, volume DEC002 exported from tape jukebox and unbound from magazine
    This example exports a cartridge that is currently bound to a magazine.
  2. $ STORAGE EXPORT CARTRIDGE DEC015
    %SLS-S-VOLEXP, volume DEC015 exported from tape jukebox
    This example exports a cartridge that is not currently bound to a magazine.

STORAGE EXPORT MAGAZINE

The STORAGE EXPORT MAGAZINE command requests that a specific magazine be removed from a tape jukebox.

Format

$ STORAGE EXPORT MAGAZINE magazine_name

Parameters

magazine_name

Specifies the name of the magazine being exported.

Description

After a magazine is exported, the correspondence between the tape cartridges in the magazine and the jukebox slots is removed. As a result, the cartridges in the magazine no longer can be loaded under robotic control.

The command displays an OPCOM message requesting that the specific magazine be removed from the jukebox. It also displays a list of all cartridges in the magazine whose location is no longer listed as in the jukebox.

Restrictions

None.

Examples

  1. $ STORAGE EXPORT MAGAZINE MAG1
    %SLS-S-MAGVOLEXP, magazine volume DEC022 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC002 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC023 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC011 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC004 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC026 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC017 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC027 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC020 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC008 exported from tape jukebox
    %SLS-S-MAGVOLEXP, magazine volume DEC028 exported from tape jukebox
    This is an example of the command issued to a magazine that contains volumes.
  2. $ STORAGE EXPORT MAGAZINE MAG2
    %SLS-W-NOVOLSEXPO, no volumes exported
    This is an example for a magazine that contains no volumes.

STORAGE IMPORT ACS

DCSC is not supported on systems running OpenVMS Version 7.1.

The STORAGE IMPORT ACS command directs the volumes currently in the cartridge access port to a slot inside the silo. Upon completion of the import, MDMS updates the volume database.

The volume is automatically added to the MDMS database with use of the /ADD qualifier. If the volume already exists, MDMS updates the following information:

Format

$ STORAGE IMPORT ACS

Parameters

None.

Qualifiers

/ACS=n

Specifies the ACS-id that holds the Cartridge Access Port (CAP) into which the volume is physically injected. ACS-id defaults to 0.

/ADD

/NOADD

/NOADD is the default. Specifies that when volumes are imported, they should automatically be added to the MDMS volume database if they do not already exist. When a volume is automatically added to the MDMS volume database, certain fields are set to default values. These fields are listed below:

/CAP=n

Specifies the cartridge access port-id (CAP) to which the volume is physically injected. Valid values range from zero (0) to two (2). The CAP-id default value is zero (0).

/LIBRARY=n

Specifies the identifier number of the library to access. If omitted, the library used is defined by the logical name DCSC$ACSLIB_DEFAULT. The valid range for /LIBRARY is one (1) to four (4).

/LSM=n

Specifies the LSM-id that holds the CAP into which the volume is physically injected. The LSM-id default value is zero (0).

Examples

$ STORAGE IMPORT ACS /ACS=1 /LSM=1 /CAP=1

Imports volumes placed in CAP number 1, located in ACS number 1, on LSM number 1.

STORAGE IMPORT CARTRIDGE

The STORAGE IMPORT CARTRIDGE command imports a single cartridge from the in port of a tape jukebox to a slot inside the tape jukebox. The tape jukebox, such as a TL820, must physically have an in port.

Format

$ STORAGE IMPORT CARTRIDGE volume_id tape_jukebox_name

Parameters

volume_id

The name of the volume you are importing

tape_jukebox_name

The name of the tape jukebox into which you are importing the volume.

Description

On tape jukeboxes with VISION systems, the volume name you specify in the volume_id field is checked with the external bar-code label. Be sure you specify this parameter correctly. If the volume name you specify does not match the bar code label, the volume is ejected from the tape jukebox through the out port.

If the specified volume is currently bound to a magazine, the system returns an error. Individual volumes bound to magazines cannot be imported using STORAGE IMPORT CARTRIDGE, only the entire magazine can be imported. Use STORAGE IMPORT MAGAZINE to import an entire magazine.

If the volume is placed in a slot that is covered by an imported magazine, the volume is also bound to the magazine.

The jukebox and slot fields in the MDMS volume database are updated for every cartridge that is imported.

If the volume to be imported does not exist in the volume database and you do not use the /ADD qualifier, the STORAGE IMPORT CARTRIDGE command fails.

Qualifiers

/ADD

/NOADD

/NOADD is the default. Adds the specified volume ID to the media database. Defaults are applied to the volume_id fields depending on the type of drives under the control of the specified jukebox. If you use this qualifier, you must also provide the media type by using the /MEDIA_TYPE qualifier. This qualifier must be used if the volume does not exist; otherwise, the system returns an error.

/MEDIA_TYPE=media_type

If you add a volume to the MDMS volume database with the /ADD qualifier, you must use this qualifier to supply the media type to the MDMS volume database.

/SLOT=number

Specifies the slot into which the cartridge is to be loaded. If the slot is in use, the system returns an error. If no slot is specified, the first available slot is used.

/VISION

If your robot has a VISION system, you can use this qualifier. If /VISION is used, the volume_id parameter is not allowed. In this case, the robot vision system reads the external bar code label. The other qualifiers, /ADD, /MEDIA_TYPE, and /SLOT, are valid.

Examples

  1. $ STORAGE IMPORT CARTRIDGE DEC022 %SLS-S-MAGVOLIMPBND, volume DEC022 imported into tape jukebox and bound to magazine
    This example imports a cartridge that is already in the MDMS volume database and the destination slot is covered by an imported magazine.
  2. $ STORAGE IMPORT CARTRIDGE DEC023 %SLS-E-NOADDVOL, IMPORT CART /NOADD performed on a non- existant volume
    This example is an import on a cartridge that is not in the MDMS volume database, and the user didn't specify /ADD.
  3. $ STORAGE IMPORT CARTRIDGE DEC023/ADD /MEDIA_TYPE=TK85K /SLOT=128 %SLS-S-MAGVOLIMPBND, volume DEC022 imported into tape jukebox and bound to magazine
    This example imports a cartridge that is not in the MDMS volume database and the destination slot is covered by an imported magazine; also, the slot is specified instead of generated.

STORAGE IMPORT MAGAZINE

The STORAGE IMPORT MAGAZINE imports the specified magazine into the specified jukebox.

Format

$ STORAGE IMPORT MAGAZINE magazine_name tape_jukebox_name

Restrictions

On a TL820-type device, if any of the slots into which the magazine is to be imported (as identified by the /LOCATION qualifier) contain tapes already imported through the STORAGE IMPORT CARTRIDGE command, the STORAGE IMPORT MAGAZINE command fails.

Parameters

magazine_name

The name of the magazine you are importing.

tape_jukebox_name

The name of the jukebox into which you are importing the magazine.

Qualifiers

/ASSIST

/NOASSIST

Requests (or rejects) an OPCOM message to prompt the operator to load the magazine into the robot identified by the tape_jukebox_name. /ASSIST is the default.

/LOCATION=(L1,L2,...)

The /LOCATION qualifier identifies the position where the operator should place a magazine in tape jukeboxes. You must use this qualifier only if you are importing a magazine into a tape jukebox where magazines can occupy more than one position, such as the TL820 or the TL826. If the magazine contains volumes, the jukebox and slot fields in the MDMS volume database are updated.

Example

$ STORAGE IMPORT MAGAZINE MAG1 TESTJUKE/LOCATION=(3,B) /NOASSIST

%SLS-S-MAGVOLIMP, magazine volume DEC031 imported into tape jukebox
%SLS-S-MAGVOLIMP, magazine volume DEC017 imported into tape jukebox
%SLS-S-MAGVOLIMP, magazine volume DEC019 imported into tape jukebox

This example imports a magazine to the second bin on face 3 of a TL820. The magazine also had some volumes bound to it prior to the import.

STORAGE INVENTORY ACS

DCSC is not supported on systems running OpenVMS Version 7.1.

The STORAGE INVENTORY ACS command verifies that a range of volumes exists in the StorageTek ACS and optionally creates entries for the volumes in the MDMS volume database.

Format

$ STORAGE INVENTORY ACS start_volume_id end_volume_id

Restrictions

You must have the OPER privilege.

Parameters

start_volume_id

Specifies the starting volume name of the range to inventory.

end_volume_id

Specifies the ending volume name of the range to inventory.

Description

When a volume that currently exists in the MDMS volume database is inventoried, MDMS updates the the following volume information in the MDMS database:

Note that performing an inventory on a large group of volumes can be a time-consuming process. MDMS performs several checks to make sure the volume is in the correct state before declaring a volume's inventory to be successful. When you inventory a large range of volumes, the request is split into groups of two volumes and information about each request is displayed to the operator at periodic intervals.

Qualifiers

/ADD

/NOADD

Adds volumes found during the inventory to the MDMS volume database, if they are not already there. /ADD is the default. When a volume is added to the MDMS volume database using this qualifier, the following defaults are applied:

/LIBRARY=library_id

This qualifier is valid only with a StorageTek ACS.

Specifies the identifier number of the library to access. If omitted, the library used is defined by the logical name DCSC$ACSLIB_DEFAULT. The valid range for /LIBRARY is 1 to 4.

/MISSING=text

Indicates the action to be taken if a volume within a range of volumes is not in the ACS, but has a record in the MDMS volume database. The value of the qualifier is specified as one of the following actions:

Action

Result

QUIT

Terminates the command immediately with an error message.

REMOVE

Removes the missing volume's record from the MDMS volume database.

EXPORT

Updates the missing volume's record to indicate that it is out of the jukebox.

If the /MISSING qualifier is present but no action is specified, the default action is QUIT.

The restriction preventing an inventory on an RDF-accessed tape device exists because such an operation disables the SLS$TAPMGRRQ process on both the client and server nodes from processing any new requests for the amount of time the inventory is in progress. In such a configuration, use the STORAGE BIND command to associate cartridges with a specific magazine.

Examples

$ STORAGE INVENTORY ACS SQ0800 SQ0802

%SLS-S-VOLINVENTORIED, volume SQ0800 inventoried
%SLS-S-VOLADDED, volume SQ0800 added to SLS database
%SLS-S-VOLINVENTORIED, volume SQ0801 inventoried
%SLS-S-VOLADDED, volume SQ0801 added to SLS database
%SLS-S-VOLINVENTORIED, volume SQ0802 inventoried
%SLS-S-VOLADDED, volume SQ0802 added to SLS database

Inventoried volumes in the range of SQ0800 to SQ0802 and added them to the MDMS database.

STORAGE INVENTORY JUKEBOX

The STORAGE INVENTORY JUKEBOX command performs a physical inventory of the cartridges in a tape jukebox, such as the TL820, or a DLT magazine loader.

Format

$ STORAGE INVENTORY JUKEBOX tape_jukebox_name [/qualifier...]

Restrictions

Parameters

tape_jukebox_name

The name of the jukebox you want to inventory.

Description

Once the label of each of the cartridges is obtained from the media, the MDMS volume database is updated to reflect each volume ID associated with its particular slot. The MDMS magazine database is also updated if a magazine exists in the database and covers the inventoried slot.

For jukeboxes with VISION systems, the label is read from the bar-code on the exterior of the cartridge. For other systems, the cartridge is mounted, examined, and dismounted to read the internal label. The latter case is a time-consuming process dependent on the total number of cartridges.

You can also specify a range of slots to inventory. This allows a partial inventory when a full inventory is not required.

Qualifiers

/ADD

/NOADD

Adds volumes found during the inventory to the MDMS volume database, if they do not already exist. The /MEDIA_TYPE qualifier must be used with the /ADD qualifier. When a volume is added to the MDMS volume database using this qualifier, most fields are set to defaults. Other fields are set according to the following table.

Field

Value

Set By

jukebox_name

Inventoried value

System

slot

Inventoried value

System

media type

Provided value

The operator

/NOADD is the default.

/MEDIA_TYPE=media_type

You must supply the /MEDIA_TYPE qualifier if the /ADD qualifier is used. It specifies the media type for inventoried volumes not found in the MDMS volume database.

/SLOT_RANGE=([start_slot,] count)

Specifies the range of slots to inventory for the jukebox.

The start_slot specifier refers to the first slot in the group of slots you want inventoried. If you omit the start_ slot specifier, the inventory starts on the first slot (slot 0).

The count specifier refers to the total number of slots you want inventoried starting with start_slot. If you want to inventory up to the last slot and do not know how many slots this would be, use quotation marks ("") as the count specifier. You can omit the parentheses if you are including only a specific value for the count specifier. For example, /SLOT_RANGE=10 inventories the first ten slots of the jukebox; /SLOT_RANGE=(5,10) inventories slots five through 14; /SLOT_RANGE=(5,"") starts the inventory at slot number 5 in the jukebox and continues until the last slot in the jukebox is reached.

Depending on the number of cartridges being inventoried, a STORAGE INVENTORY JUKEBOX operation can be time consuming. During this time, the SLS$TAPMGRRQ process on the node where the tape device is connected is unable to process any new requests because it is waiting for the inventory to complete. Make sure you perform inventory commands when you expect MDMS activity to be at a minimum.

As an alternative for tape jukeboxes that have no robotic vision system, use STORAGE BIND to associate volumes with specific slots in the magazines.

The restriction preventing an inventory on an RDF-accessed tape device exists because such an operation disables the SLS$TAPMGRRQ process on both the client and server nodes from processing any new requests for the amount of time the inventory is in progress. In such a configuration, use the STORAGE BIND command to associate cartridges with a specific magazine.

Examples

  1. $ STORAGE INVENTORY JUKEBOX MYJUKE1
    This inventories all slots in tape jukebox MYJUKE1.
  2. $ STORAGE INVENTORY JUKEBOX MYJUKE1/ADD/SLOT_ RANGE=(10,10)/ MEDIA_TYPE=TK85K
    This inventories the 10 slots starting at slot 10 and adds any volumes that are not currently in the MDMS volume database.

If the jukebox performed its own inventory (loading internal RAM), and there were tapes in one or more of the tape drives at the time, the slots the tapes were in will show as empty after the STORAGE INVENTORY command.

STORAGE LABEL

The STORAGE LABEL command generates a printable label for a specified volume or volume set.

Format

$ STORAGE LABEL volume-id

Parameters

volume-id

Specifies the volume ID of a single volume or of a volume set for which you want a printable label.

Description

The storage administrator determines whether the labels are sent to:

The label contains current information from the MDMS record that includes the following:

Qualifiers

/VOLUME

Generates a printable label for a specific volume in a volume set, rather than the entire volume set.

Examples

$ STORAGE LABEL LAB002

Generates a printable label for volume LAB002. If the output is directed to a printer (as specified by the LBL symbol in TAPESTART.COM), the command prints the label.

Sample of a printed label for user SMITH:

Volume: VOL55 User: SMITH
Alloc: 10-JUL-1996 Next: *none*
Scratch: 10-JUL-1997 Prev: *none*
Node: VENUS

STORAGE LOAD

The STORAGE LOAD command requests that a specified volume be loaded onto a drive. If a drive can be loaded automatically, such as in an automated tape library, the load occurs automatically; otherwise, a human operator intervenes.

Format

$ STORAGE LOAD drive-name volume-id

Restrictions

Loading a volume in the free state does not prevent the volume from being allocated to another user. This applies even while the volume is loaded and is currently in use. Volumes intended for long-term use should be allocated before being loaded.

Parameters

drive-name

Specifies the name of the drive on which to load a volume. Use a physical device name or a logical name to identify the drive.

volume-id

Specifies the volume ID of the volume you want to load onto the drive.

/CHECK=[volume-id] (default)

/NOCHECK

Checks or compares the first 6 characters of a volume ID to the volume label. It is possible for a volume to have a volume label that is different from the volume ID recorded in the MDMS volume database.

Use the following naming recommendation:

/MOUNT[=[qualifiers]

/NOMOUNT (default)

Executes a DCL MOUNT command once the volume is loaded and verified (if the /CHECK qualifier has not been disabled). Use this qualifier to specify DCL MOUNT command qualifiers, such as /FOREIGN.

/REPLY=symbol

Stores the operator's reply in the specified local DCL symbol. The symbol defined contains the text of the operator's reply in the DCL REPLY/TO or REPLY/ABORT command. This qualifier is used for load requests that require operator intervention.

/WRITE_ENABLE (default)

/NOWRITE_ENABLE

The following descriptions explain this qualifier:

Using the /WRITE_ENABLE qualifier requires write access to the volume.

Examples

  1. $ STORAGE LOAD MIA0 5432
    The STORAGE LOAD command loads volume 5432 on the drive and checks to see if the volume label matches the value of the volume ID.
  2. $ STORAGE LOAD/CHECK MIA0 RVVOL4
    The STORAGE LOAD/CHECK command loads the volume RVVOL4 onto the optical drive and checks to see if the volume label matches the value of the volume ID.

STORAGE RELEASE

The STORAGE RELEASE command releases a specified volume from the transition state to the free state and makes the volume available for allocation by another user.

Format

$ STORAGE RELEASE volume-id

Restrictions

Parameters

volume-id

Specifies the name of the volume to release from the transition state.

Qualifiers

None.

Examples

$ STORAGE RELEASE 34433

Releases volume 34433 to the free state and makes it available for allocation by other users.

STORAGE REMOVE DRIVE

The STORAGE REMOVE DRIVE command removes a drive from the pool of allocated drives used by the MDMS software.

Format

$ STORAGE REMOVE DRIVE drive-name

Restrictions

You must have the OPER privilege.

Parameters

drive-name

Specifies the name of the drive that is unavailable. Use a physical device name or logical name to identify the drive.

Description

Available drives are listed in the ALLDEV parameter in the file TAPESTART.COM.

The MDMS software deallocates the drive when it is removed from this list and makes it available for use by other users or processes.

Qualifiers

None.

Example

$ STORAGE REMOVE DRIVE MUA0:

Removes drive MUA0: from the MDMS drive pool, making the drive currently unavailable for backup operations.

STORAGE REMOVE MAGAZINE

The STORAGE REMOVE MAGAZINE command removes a magazine from the MDMS magazine database. Any volume currently bound to the magazine is removed automatically.

Format

$ STORAGE REMOVE MAGAZINE magazine_name

Restrictions

The magazine to be removed cannot be imported into a tape jukebox. To see if the magazine is imported, use the STORAGE SHOW MAGAZINE command.

Parameters

magazine_name

The name of the magazine to remove from the database.

Qualifiers

None.

Example

$ STORAGE REMOVE MAGAZINE MAGNUM1

Removes the magazine name MAGNUM1 from the magazine database.

STORAGE REMOVE VOLUME

The STORAGE REMOVE VOLUME command removes a specified volume from the MDMS volume database.

Format

$ STORAGE REMOVE VOLUME volume-id

Restrictions

Parameters

volume-id

Specifies the volume ID of the volume to be removed.

Description

This command removes only the volume record, not the actual volume.

WHEN . . .

THEN . . .

you are removing either side of a double-sided volume

the other side of the volume is automatically removed.

the volume is located inside a jukebox

it must be exported out of the jukebox with the STORAGE EXPORT command before removing it from the MDMS volume database

Qualifiers

None.

Examples

  1. $ STORAGE REMOVE VOLUME JUN003
    Removes volume JUN003 from the MDMS volume database.
  2. $ STORAGE EXPORT VOLUME TEST23
    $ STORAGE REMOVE VOLUME TEST23
    The STORAGE EXPORT command exports volume TEST23 from a jukebox.
    The STORAGE REMOVE command removes volume TEST23 from the MDMS volume database.

STORAGE REPORT FILE

The STORAGE REPORT FILE command generates a report for one or more specific user files that have been recorded in the SLS user history files. SLS history files are created when user files are saved using either the:

The STORAGE REPORT FILE command is used to search user history files.

Format

$ STORAGE REPORT FILE file-spec[,...]

Parameters

file-spec[,...]

Specifies the file name to be searched. This parameter:

Restrictions

Qualifiers

/BEFORE=[time]

Specifies that only entries created before the selected time will display. This time is when the file was backed up, not created. Use absolute or combination time format.

/DELETE

/NODELETE (default)

The /DELETE qualifier specifies the selected entries be deleted from the on-line history files instead of being displayed. Using the /DELETE qualifier:

This is useful for cleaning out unwanted history entries.

Default:

/NODELETE

/NEXT_FILE

Indicates that searching is to begin with the file that follows the file specified by the DCL symbol SLS$INQ_FILE. This qualifier is useful when making wildcard (*) searches with the /SYMBOLS qualifier to see one file at a time.

/OUTPUT=output-file

Directs the information to an output file. The default output is the terminal screen.

/SAVE_SET=save-set

Specifies a search of on-line user history files for information on save sets. To specify more than one save set, separate the save set names with commas and enclose them in parentheses.

Example:

/SAVE_SET=(JUNE.SAVE,JULY.SAVE,AUGUST.SAVE)

The default is *.* which specifies all save sets.

/SINCE=[time]

Specifies that only entries made since the specified time will display. This time is when the file was backed up, not created. Use absolute or combination time format.

/SYMBOLS

/NOSYMBOLS (default)

The /SYMBOLS qualifier specifies the placement of the output to a set of DCL symbols instead of a report file. The following local DCL symbols are created.

SLS$INQ_FILE = file name of file found
SLS$INQ_SAVES = number of saved versions of file (n)
SLS$VOLUME_<index> = volume numbers
SLS$INQ_SET_<index> = save set names
SLS$INQ_DATE_<index> = date and time of backup job
SLS$INQ_POS_<index> = position on volume of save set

An Index value of . . .

Indicates the . . .

1 for SLS$INQ_VOLUME_x, SLS$INQ_ SET_x, etc.

Most recent backup of the file

n for SLS$INQ_VOLUME_x, SLS$INQ_ SET_x, etc.

Oldest backup of the file

How to find the next match of a wildcard search:

Type the same command line and include the /NEXT_FILE qualifier.

The /NOSYMBOLS qualifier is the default.

/USER_NAME=user-name

Specifies the user's name and searches the specified user's on-line history. Otherwise, the history files of the user invoking the command are searched.

Requirement:

This qualifier requires the OPER privilege.

/VOLUME=volume-id

Limits the search of history files to a specific volume. To specify more than one volume, separate the volume names with commas and enclose them in parentheses.

Example:

/VOLUME=(MAY,JUNE,JULY)

The default is to search all volumes.

Examples

The following examples illustrate the STORAGE REPORT FILE command.

  1. $ STORAGE REPORT FILE []*.*;*

    Result:
    Creates a report of all files backed up by user SMITH. Note that if the report exceeds more than one page, then you are prompted to move from page to page.
    Run date 21-JUN-1989 09:26
    Page 1 User Backup Report ---------------------------------------------------------------------------- Username: SMITHiles: USER$1:[SMITH]*.*;*
    ---------------------------------------------------------------------------- %SLS-I-HISTSEARCH, searching user history for USER$1:[SMITH]*.*;*...

    USER$1:[SMITH]05JUN89_1032.LIS;1
    12-JUN-1989 14:22:34.14 UBRT01 12JUN89_1421.BAK; USER$1:[SMITH]05JUN89_1107.LIS;1
    12-JUN-1989 14:22:34.14 UBRT01 12JUN89_1421.BAK; USER$1:[SMITH]05JUN89_1107.LOG;1
    12-JUN-1989 14:22:34.14 UBRT01 12JUN89_1421.BAK;
    .
    .
    .
    End of report Press Return to continue
  2. $ STORAGE REPORT FILE/SYMBOLS *.DAT

    Result:
    Specifies placement of the output for the first .DAT file that matches into DCL symbols instead a report file and displays a message similar to:
    %SLS-I-HISTSEARCH, searching user history for USER$1:[*...]*.DAT;* ...
  3. $ STORAGE REPORT FILE/NEXT_FILE *.DAT

    Result:
    Searches the files that follow the file specified by the DCL symbol SLS$INQ_FILE and displays the report on the specified .DAT files. Note that the /SYMBOLS qualifier was not included in this example, therefore displaying volume information directly to the terminal screen.

    Run date 08-JUL-1989 12:38 Page 1
    User Backup Report
    ---------------------------------------------------------------------------- Username: JONES
    Files: USER$1:[*...]*.DAT;*
    ---------------------------------------------------------------------------- %SLS-I-HISTSEARCH, searching user history for USER$1:[*...]*.DAT;*...

    USER$1:[JONES]DECW$SM_GENERAL.DAT;3
    21-JUN-1989 14:22:34.14 VOL24 21JUN89_1340.BAK;
    USER$1:[JONES]DECW$TERMINAL_DEFAULT.DAT
    21-JUN-1989 14:22:34.14 VOL24 21JUN89_1340.BAK; USER$1:[JONES]DECW$XDEFAULTS.DAT
    21-JUN-1989 14:22:34.14 VOL24 21JUN89_1340.BAK; USER$1:[JONES]FOR002.DAT
    21-JUN-1989 14:22:34.14 VOL24 21JUN89_1340.BAK;
    End of report

    Press Return to continue

STORAGE REPORT SLOT

The STORAGE REPORT SLOT command generates a report on the storage slot location of a volume.

Format

$ STORAGE REPORT SLOT field[=value,...]

Restrictions

Parameters

field

Specifies what slot fields to include in the report. To specify more than one field, separate the fields by using commas. Select one or more of the following fields:

LOCATION[=valid location]
SLOT[=slot ID]
VOLUME[=volume ID]

Any field can contain the asterisk (*) and percent sign (%) wildcard characters. A field specified without a value will display all values.

Description

This command directs MDMS software to:

Qualifiers

The qualifiers for the STORAGE REPORT SLOT command are grouped into two categories:

  1. Command qualifiers-Apply to the entire MDMS command
  2. Field qualifiers (position dependent)-Apply to specific fields associated with the command

The following optional qualifiers can be used with the REPORT SLOT command.

Command Qualifiers

/OUTPUT=file

Specifies an output file. The default output is the terminal screen.

/TITLE=text

Specifies a specific title for the report. The title must be enclosed in quotation marks and follow the standard DCL text format.

Field Qualifiers

/PRINT (default)

/NOPRINT

The /PRINT qualifier (default) specifies the printing of a field. Use the /NOPRINT qualifier when you want to sort or select records, but do not want the field to print or be listed in the report.

/SORT

/NOSORT (default)

The /SORT qualifier specifies that volumes are listed based on the field indicated by the /SORT qualifier. /NOSORT is the default.

/WIDTH=number

Specifies the printing width of the field by number of characters.

Examples

  1. $ STORAGE REPORT SLOT LOCATION=HEADQUARTERS,SLOT,VOLUME
    Displays all volumes in slots at the location of HEADQUARTERS. The software displays a report similar to the following:

    Run date 10-APR-1996 18:57 Page 1
    Slot File Report
    Location Slot Volume
    -------------------------------------------------------------------------- HEADQUARTERS 31 VOL6
    HEADQUARTERS 9 VOL2
    2 record(s) found

    STORAGE REPORT SLOT LOCATION=HEADQUARTERS,SLOT.VOLUME

    Press Return to continue...
  2. $ STORAGE REPORT SLOT/TITLE="Empty Slots" LOCATION,SLOT,VOLUME=""/NOPRINT
    Displays a list of slots that contain no volumes. The volume field is blank and is not printed. The title of the report is "Empty Slots."

    Run date 10-APR-1996 16:01 Page 1
    Empty Slots
    Location Slot
    -------------------------------------------------------------------------- HEADQUARTERS 31
    HEADQUARTERS 9
    MARKETING TEXT20
    MARKETING TEXT 22
    4 record(s) found

    STORAGE REPORT SLOT TITLE=Empty Slots LOCATION,SLOT,VOLUME=/NOPRINT
    Press Return to continue...

STORAGE REPORT SYSTEM

The STORAGE REPORT SYSTEM command generates a report on one or more files saved during SLS system backups.

Each report can contain information about one or several files.

The STORAGE REPORT SYSTEM command is used to search system history files.

Format

$ STORAGE REPORT SYSTEM file-spec[,...]

Parameters

file-spec[,...]

Specifies the file to be searched. This parameter:

WHEN the fields of the file specification are not specified, THEN the current default values are used.

Restrictions

None.

Qualifiers

/BEFORE=[time]

Specifies that only entries created before the selected time will display. This time is when the file was backed up, not created. Use absolute or combination time format.

/CONCEALED

/NOCONCEALED (default)

The /CONCEALED qualifier specifies that the file names be looked up without translating the concealed device name. The /NOCONCEALED qualifier specifies that the file names be looked up using the file name expanded with the actual physical device name.

/HISTORY_SETS=history-set-name

Searches on-line history sets. Wildcard characters (* and %) are permitted. To specify more than one on-line history set, separate the on-line history set name with commas and enclose them in parentheses.

Example:

/HISTORY_SETS=(JUNE,JULY)

The default is *.*, which specifies all on-line history system sets.

/NEXT_FILE

Begins searching with the file that follows the file specified by the DCL symbol SLS$INQ_FILE. This qualifier is useful when making wildcard searches with the /SYMBOLS qualifier to view one file at a time.

/OUTPUT=output-file

Directs the information to an output file. The default output is the terminal screen.

/OWNER=uic

Specifies files by the owner's UIC.

WHEN . . .

THEN . . .

This qualifier is omitted.

Only files owned by the issuing user are displayed.

The user has SYSPRV or BYPASS privileges and does not specify the /OWNER=uic_qualifier.

All files are displayed.

/SINCE=[time]

Specifies that only entries made since the specified time will display. This time is when the file was backed up, not created. Use absolute or combination time format.

/SYMBOLS

/NOSYMBOLS (default)

The /SYMBOLS qualifier specifies placement of the information for the first file that matches a wildcard specification into a set of DCL symbols instead of a report file. The following local symbols are created.

SLS$INQ_FILE = file name of file found
SLS$INQ_SAVES = number of saved versions of file (n)
SLS$INQ_VOLUME_<index> = volume numbers
SLS$INQ_SET_<index> = save set names
SLS$INQ_DATE_<index> = date and time of backup job
SLS$INQ_POS_<index> = position on volume of save set

An Index value of . . .

Indicates the . . .

1 for SLS$INQ_VOLUME_x, SLS$INQ_ SET_x, etc.

Most recent backup of the file

n for SLS$INQ_VOLUME_x, SLS$INQ_ SET_x,_etc.

Oldest backup of the file

How to find the next match of a wildcard search:

Type the same command line and include the /NEXT_FILE qualifier.

The /NOSYMBOLS qualifier is the default.

Example

The following example illustrates the STORAGE REPORT SYSTEM command.

$ STORAGE REPORT SYSTEM USER$1:[BUCK.DEMO]*.*;*-
_$/OUTPUT=[BUCK.REPORTS]BACKUP.REP/BEFORE=17-JUN-1989/CONCEALED

Result:

This example:

To display the output report file, enter the following command:

$ TYPE [BUCK.REPORTS]BACKUP.REP

Result:

A file similar to the following displays on the terminal screen.

Run date 20-JUN-1989 19:16 Page 1

System Backup ReportSet

GENERIC -- File *::USER$1:[BUCK.DEMO]*.*;*
Filename-------------------------------------------------------------Owner--- ----------Date_of_Backup---------Real--------Saveset----------------------

VIOLA::USER$1:[BUCK.DEMO]BAR.C;1
12-JUN-1989 09:28 DEMO4 22MAY89_1130.BAK [100,76]
VIOLA::USER$1:[BUCK.DEMO]BAR.C;1
12-JUN-1989 09:28 DEMO4 22MAY89_1130.BAK [100,76]
VIOLA::USER$1:[BUCK.DEMO]FOO.C;1
12-JUN-1989 09:28 DEMO4 22MAY89_1130.BAK [100,76]
VIOLA::USER$1:[BUCK.DEMO]FOO.C;1
12-JUN-1989 09:28 DEMO4 22MAY89_1130.BAK [100,76]
VIOLA::USER$1:[BUCK.DEMO]LOGIN.COM;40
12-JUN-1989 09:28 DEMO4 22MAY89_1130.BAK [100,76]
VIOLA::USER$1:[BUCK.DEMO]LOGIN.COM;39
12-JUN-1989 09:28 DEMO4 22MAY89_1130.BAK [100,76]

End of report

STORAGE REPORT VOLUME

The STORAGE REPORT VOLUME command generates a report for one or more volumes recorded in the MDMS volume database. Each requested report can contain information about one or several volumes in the MDMS volume database.

Format

$ STORAGE REPORT VOLUME parameter-field[=value], . . .

Restrictions

You must have the OPER privilege.

Parameters

parameter-field

Specifies the MDMS volume database fields to be placed in the report. If more than one field is specified, then separate the fields with commas. There is no limit for the number of selected fields for the parameter.

See Field Parameters describes the field parameters for the REPORT VOLUME command.

  1. Field Parameters

Field

Meaning

Value Format

Example Output

ACCOUNT

Owner's account name

String

ENGINEERING

ALLOCATED_DATE

Last allocation date

Date

18-FEB-1996

BLOCK_FACTOR

Number of records in one block

Numeric

20

BRAND

Brand name of a disk or tape volume

String

Digital

CARTRIDGE_SLOT

Number of a jukebox slot where a volume is stored

Numeric

21

CLEANED_DATE

Last date the volume was cleaned

Date

18-FEB-1996

DENSITY

Density of a recorded data for tape media

Numeric

6250

DRIVE

Name of a tape or optical drive

String

MUA0

ELIGIBLE_FOR_
ALLOCATION

Allocation eligibility

Special

No values. MDMS software lists the free volume's location, media type, length, and date the volume was freed.

FLAG

Status flag

Keyword

ALLOCATED

FORMAT

Recording format

String

BACKUP

FREED_DATE

The date the volume has been freed (deallocated)

Date

18-FEB-1996

INITIALIZATION_DATE

The last date the volume was initialized

Date

21-MAY-1996

IO_ERROR_COUNT

Number of I/O errors since a volume was last cleaned

Numeric

1500

JOB_NAME

Name of the job that wrote the volume

String

JOB1

JUKEBOX

Name of a jukebox

String

VENUS$JUKE1

LAST_ACCESS_DATE

The last date a volume was loaded

Date

03-JAN-1996

LENGTH

Volume length

Numeric

2400

LOCATION

Permanent location of a volume

String

HEADQUARTERS

MEDIA_TYPE

Type of media

String

9TRACK

MOUNT_COUNT

Number of times a volume has been mounted

Numeric

23

NEXT_VOLUME

Next volume in a set

String

ABC123

NODE_NAME

Owner's node name

String

BOSTON

NOTES

Descriptive notes

String

DRA2 BACKUP

OFFSITE_DATE

Date a volume is to be taken off site

Date

18-FEB-1996

ONSITE_DATE

Date a volume is to be returned on site

Date

12-MAY-1996

OTHER_SIDE

Opposite side of double-sided media

String

VOLB

OWNER

Owner's user identification code

Standard OpenVMS UIC format

[1,4]

POOL

Volume's pool name

String

GENERAL

PREVIOUS_VOLUME

Previous volume in a volume set

String

ABC123

PROTECTION

Access protection code

Special

No values. MDMS software displays S:RW,G:R

PURCHASE_DATE

Volume's purchase date

Date

18-FEB-1996

RECLENGTH

Record length of recorded data

Numeric

2400

SCRATCH_DATE

Date a volume is to be freed

Date

18-FEB-1996

SIDE

Side A or Side B of double- sided media

String

A

SLOT

Number of a non-jukebox slot where a volume is stored

Numeric

136

STATUS

Jukebox status or position of a double-sided medium

String

In slot

TIMES_CLEANED

Number of times a volume has been cleaned

Numeric

6

USER_NAME

Owner's user name

String

JONES

VOLUME

Volume ID

String

PUB001

Qualifiers

The qualifiers for the STORAGE REPORT VOLUME command are grouped into two categories:

The following optional qualifiers can be used with the STORAGE REPORT VOLUME command.

Command Qualifiers

/DIRECT

/NODIRECT (default)

The /DIRECT qualifier specifies direct access to the MDMS volume database file.

The /NODIRECT qualifier specifies using the SLS$TAPMGRRQ process to read the MDMS volume database file.

The /DIRECT qualifier requires SYSPRV, BYPASS, or READALL privileges.

/FILTER

/NOFILTER (default)

The /FILTER qualifier specifies that records are read from the MDMS volume database one record at a time, checked against any matching constraints (values), and then given to sort routines.

The /NOFILTER qualifier specifies that the entire MDMS volume database is to be sorted and records are checked against any matching constraints as the report file is generated.

The /FILTER qualifier is valid only with the /DIRECT qualifier.

The /FILTER qualifier is useful when only a portion of the MDMS volume database file is to be printed, such as generating a list of volumes in transition. The records are always filtered if the /DIRECT qualifier is not specified.

/OUTPUT=file

Specifies an output file. The default displays the report on the terminal screen.

/TITLE=text

Specifies the title for the report. The title must be enclosed in quotation marks. For example:

$ STORAGE REPORT VOLUME/TITLE="Free volumes" VOLUME,FLAG=(Free)

Field Qualifiers

/PRINT (default)

/NOPRINT

The /PRINT qualifier is the default and specifies that the field be included in the report.

The /NOPRINT qualifier sorts or selects records but does not print or list the field in the report.

/SORT

/NOSORT (default)

The /SORT qualifier sorts volume records based on the field associated with the sort qualifier. The default is to sort by LOCATION.

/WIDTH=number

Specifies the printing width of the field in characters.

Examples

  1. $ STORAGE REPORT VOLUME VOLUME=VOL,*,FLAG=(ALLOCATED) /NOPRINT
    Generates a report on all volumes with VOL as the prefix. The flag field is not printed.
  2. $ STORAGE REPORT VOLUME/DIRECT/FILTER ALLOCATED_DATE /SORT,VOLUME,USER
    Generates a report on all volumes sorted by the allocation date and displays a report similar to the following:

Run date 10-APR-1996 17:52 Page 1

MDMS Volume Database File Report
Allocated Volume Username
-------------------------------------------------------------------------

20-DEC-1995 16:20 ATLAS1 SMITH
22-JAN-1996 10:00 TEST3 JONES
2-FEB-1996 00:07 VOLN5 JONES
14-MAR-1996 00:01 VOLN6 JONES
9-APR-1996 08:30 ATLAS2 SMITH
5 record(s) found

Press Return to continue...

  1. $ STORAGE REPORT VOLUME/NOFILT/TITLE=Status of Jukebox Volumes - _$ STATUS=(OUTSIDE,B_DRIVE)/SORT,VOLUME,FLAG,MEDIA_ TYPE=RV02K
    Generates a report on all volumes sorted by the status field and displays a report similar to the following:

Run date 26-MAR-1996 13:27 Page 1

Status of Jukebox Volumes
Status Volume Status Media Type
------------------------------------------------------------------------ Outside ED10 Alloc RV02K
Outside ED11 Alloc RV02K
In Slot AIM001 Alloc RV02K
In Slot AIM007 Free RV02K
In Slot DEM002 Free RV02K
Side A in drive AIM004 Free RV02K
6 record(s) found

STORAGE REQUEUE

The STORAGE REQUEUE command reschedules execution of system backups for the current day. This is useful when system failures prevent regularly scheduled system backups from executing.

Format

$ STORAGE REQUEUE

Parameters

None.

Restrictions

Requires OPER privileges.

Qualifiers

None.

Example

The following example illustrates the STORAGE REQUEUE command.

$ STORAGE REQUEUE

Result:

The software requeues the SLS system backups that were not executed due to system failure.

STORAGE RESTORE

The STORAGE RESTORE command creates a batch job that restores one or more files or databases.

If the files were saved using the VMS BACKUP format, SLS automatically searches the system and user history files for the volume ID and save set in which the first file in this list was saved. You can use the /VOLUME_ID and /SAVE_ SET qualifiers to override this search and control exactly which version of a file should be restored.

If the databases were saved in RMUBACKUP format, SLS automatically searches the database history files for the volume ID and save set in which the most recent version of the database was saved.

The STORAGE RESTORE command puts the batch job number in a symbol called SLS$JOBNUM and the batch queue in a symbol called SLS$QUENAM. You use these two symbols for subsequent DCL SYNCHRONIZE commands.

Format

$ STORAGE RESTORE file-spec[,...]

Parameters

file_spec[,...]

Name of the file or list of files to restore. Wildcard characters (* or %) are allowed.

The first file specified in the list may be used as a search key to search SLS history database. This method of searching finds the volume ID and backup save set file from which to perform the restore operation.

Restrictions

/CRC (default)

/NOCRC

/CRC qualifier specifies whether the software cyclic redundancy check (CRC) is to be verified.

The /NOCRC qualifier disables CRC operation.

Restriction:

This qualifier applies only to the BACKUP format.

/DB_CMDQUALS=list of RMU/RESTORE command qualifiers

Specifies an optional list of RMU/RESTORE command qualifiers to be appended onto the RMU/RESTORE command when the command is issued.

/DB_FILQUALS=list of RMU/RESTORE file or area qualifiers

Specifies an optional list of RMU/RESTORE file or area qualifiers to be appended onto the RMU/RESTORE command when the command is issued.

/DENSITY=density-keyword

Specifies either the density (in bpi) for tape volumes or the data compaction and record blocking option for TK90K cartridges. The meaning of this parameter depends upon the type of drive being used.

IMPORTANT: Note that the /DENSITY qualifier should be used when you have to specify a change in the kind of media. You should NOT specify /DENSITY as a selection criterion.

IF the volume is being loaded onto . . .

THEN use this qualifier . . .

a TA90 or TA90E cartridge system

/MEDIA_TYPE=keyword

all other devices

/DENSITY=keyword

Examples:

1600, 6250

How to find valid density keywords:

Allowed keywords for this qualifier are site-dependent. See your storage administrator for the valid density keywords at your site.

When to use this qualifier:

Use this qualifier when the:

When NOT to use this qualifier:

Do not use this qualifier if the recording density does not apply to media at your site.

/FORMAT=keyword

Specifies the storage format of a foreign volume. Valid formats include:

/HISTORY=history_name

Specifies the name of the history file group to search. Depending on the type of backup used to create the history file, the correct backup software will be used to perform the restore operation. See the HISNAM_n symbol assignments in TAPESTART.COM for the list of allowable values for this qualifier.

/LOG

/NOLOG (default)

The /LOG qualifier records each restored file in the log file of the batch job that SLS software generates when performing restore operations.

The /NOLOG qualifier is the default.

/MEDIA_TYPE=type

Specifies the type of media for a volume that does not have a record in the SLS volume database. This value is used by the SLS software to select an appropriate device for such volumes.

Restriction:

If you specify this qualifier, you cannot specify the /SCREEN qualifier in the same STORAGE RESTORE command.

/NEW_VERSION

/NONEW_VERSION (default)

/NEW_VERSION qualifier creates a new file with a version number one greater than the latest file on the disk.

The /NONEW_VERSION qualifier is the default.

This qualifier is position dependent:

Use this qualifier with the output qualifier.

/NOTES="string"

Writes the NOTES string to the notes field of the SLS database volume record.

/OUTPUT=output-file

Specifies the output file or directory in which the restored files are placed. If this qualifier is omitted, then files will be placed in the user's current default directory.

Requirement:

If you specify this qualifier, then you must supply the output filename.

/OVERLAY

/NOOVERLAY (default)

If a file exists on the disk with the same version number as the file being restored, then the /OVERLAY qualifier specifies that the contents of the existing file will be substituted (or overlaid) with the contents of the restored file.

IF the /OVERLAY qualifier is specified, AND the file being restored is larger than the present file, THEN more blocks are allocated on the disk to extend the file.

The /NOOVERLAY qualifier is the default.

This qualifier is position dependent:

Use this qualifier with the output specifier.

/OWNER=uic

Restores files that are owned by the specified UIC.

Requirements:

This qualifier requires the SYSPRV privilege. Write access to the files is necessary.

/POSITION=number

Specifies the tape mark count or position of a save set file on a volume.

When to use this qualifier:

Use this qualifier to quickly locate save sets on optical media.

/POST_PROCESSING="command"

Specifies a DCL command to execute after the restore operation completes, enclosed within quotation marks.

Restriction:

This qualifier cannot be used with the /SCREEN qualifier.

/PRE_PROCESSING="command"

Specifies a DCL command to execute before the restore operation begins, enclosed within quotation marks.

Restriction:

This qualifier cannot be used with the /SCREEN qualifier.

/RECLENGTH=number

Specifies the record length on EBCDIC format tapes. The record length field must be greater than zero when EBCDIC files are restored.

Omitting this qualifier:

The following error message is displayed if the record length is omitted:

%SLS-X-FORNORECL, record length must be specified for foreign EBCDIC volumes

/REPLACE

/NOREPLACE (default)

The /REPLACE qualifier restores a new version of a file:

The /NOREPLACE qualifier is the default.

This qualifier is position dependent:

Use this qualifier with the output specifier.

/SAVE_SET=save-set

Specifies the save set from which the restore operation will restore the files. If this qualifier is omitted, then SLS searches its' history database for the name of the save set containing the highest version of the input file specified.

Requirements:

If you specify this qualifier, then you must supply the save set name.

Restriction:

This qualifier is only valid when specified with the /VOLUME_ID qualifier.

/SCREEN

Specifies the screen mode of operation. This qualifier displays the Restore Screen, the screen used in the SLS menu structure.

Restrictions:

/USER_NAME=user-name

Restores the specified users files or save sets.

Requirement:

To specify this qualifier, the requesting process must have OPER and CMKRNL privileges.

/VERIFY

/NOVERIFY (default)

The verify qualifier performs a compare operation after the restore operation. This operation compares the specified files or save sets on a volume, with files that are created on the disk as a result of the restore operation

The /NOVERIFY qualifier is the default.

/VOLUME_ID=volume-id

Specifies the volume ID of the volume that contains the file(s) to be restored.

If this qualifier is omitted, then SLS searches its' history files to find the volume ID where the save set was written that contains the highest version of the input file.

Restriction:

This qualifier is only valid when specified with the /SAVE_ SET qualifier.

Example

The following table illustrates how to use the STORAGE RESTORE command:

IF you want to . . .

AND the volume ID and save set name is . . .

THEN . . .

Restore a file(s) from a save set

Unknown

Enter.

$ STORAGE RESTORE DOCUMENT1.TXT

Result:

SLS searches the SLS history database set to find the volume ID and save set file from which to restore file DOCUMENT1.TXT.

 

Known

Enter:

 

$ STORAGE RESTORE DOCUMENT1.TXT -
$_/SAVE_SET=BOOKS.BCK/VOLUME_ID=DOCSETS

Result:

Restores the file DOCUMENT1.TXT from the save set BOOKS.BCK that is located on the volume DOCSETS

Restores an entire save set

N/A

You must know the volume ID and the save set name.
Enter:
$ STORAGE RESTORE/SAVE_SET=BOOKS.BCK
$_/VOLUME_ID=DOCSETS

Result:

Restores all the files from the save set BOOKS.BCK that is located on the volume DOCSETS.

STORAGE SAVE

The STORAGE SAVE command backs up files for safekeeping and long-term storage. The save operation can be performed onto removable media, such as a 9-track magnetic tape or an RV02K optical cartridge. Save operations are used for:

The STORAGE SAVE command puts the batch job number in a symbol called SLS$JOBNUM and the batch queue in a symbol called SLS$QUENAM. You use these two symbols for subsequent DCL SYNCHRONIZE commands.

Format

$ STORAGE SAVE file-spec[, . . . ]

Parameters

file-spec[, . . .

Specifies the files or save sets to be backed up. The format is the standard VMS file specification.

Permitted characters:

This parameter permits the use of asterisk (*) and percent sign (%) wildcard characters in the file specification.

Restrictions

None.

Qualifiers

/AFTER=[time]

Specifies the time of day the save operation will take place.

Required format:

Specify absolute or combination time format.

/BACKUP

Selects files or save sets by comparing the BACKUP date and time recorded in the header record with the BACKUP date and time specified with the /BEFORE or /SINCE qualifier. The BACKUP date and time recorded in the header record is the BACKUP date and time the file was last saved or copied with the /RECORD qualifier.

Restriction:

This qualifier must be used with the /BEFORE or /SINCE qualifier, and cannot be used with the /CREATE, /MODIFIED, or /EXPIRED qualifiers.

WHEN you use the
/BACKUP qualifier with . . .

AND the files were . . .

THEN . . .

The /BEFORE qualifier

Previously saved with the /RECORD qualifier

Files with a BACKUP date prior to the specified date or time are selected.

 

Not previously saved with the /RECORD qualifier

All files without BACKUP dates are selected.

The /SINCE qualifier

Previously saved with the /RECORD qualifier

Files with a BACKUP date equal to or later than the specified date or time are selected.

 

Not previously saved with the/RECORD qualifier

All files without BACKUP dates are selected.


/BEFORE=time

Selects files dated earlier than the date and time specified.

When to use:

Use this qualifier to select files with a time value using:

Restriction:

You can use only one of the above four qualifiers at a time in the command line.

Required format:

Specify either absolute or combination time format.

/BLOCK_FACTOR=number

Specifies the records per block.

Restriction:

This qualifier applies only to the EBCDIC format.

/CRC (default)

/NOCRC

The /CRC qualifier performs a cyclic redundancy check (CRC) and stores the data in blocks of the save set.

Restriction:

This qualifier applies only to the BACKUP format.

The /NOCRC qualifier disables CRC operation.

/CREATED

Selects files according to the creation date of the file.

Restriction:

This qualifier must be used with either the /SINCE or /BEFORE qualifiers and cannot be used with the /BACKUP, /MODIFIED, or /EXPIRED qualifiers.

/DELETE

/NODELETE (default)

The /DELETE qualifier deletes files after they are saved.

The /NODELETE qualifier is the default.

/DENSITY=value

Specifies either the density (in bpi) for tape volumes or the data compaction and record blocking option for TK90K cartridges. The meaning of this parameter depends upon the type of drive being used.

IMPORTANT: Note that the /DENSITY qualifier should be used when you have to specify a change in the kind of media. You should NOT specify /DENSITY as a selection criterion.

IF the volume is being loaded onto . . .

THEN use this qualifier . . .

A TA90 or TA90E cartridge system

/MEDIA_TYPE=keyword

All other devices

/DENSITY=keyword

Examples:

1600, 6250

How to find valid density values:

Allowed values for this qualifier are site-dependent. See your storage administrator for the valid density values at your site.

When to use this qualifier:

Use this qualifier when the:

When NOT to use this qualifier:

Do not use this qualifier if the recording density does not apply to media at your site.

/EXCLUDE=(file-spec[, . . . ])

Excludes files that meet the selection criteria from the save process and does not process these files.

/EXPIRED

Selects files according to their expiration date.

Restriction:

This qualifier must be used with either the /BEFORE or /SINCE qualifiers.

/FAST

Specifies that a fast file scan should be performed by:

Fast file scans reduce processing time and are useful when you want to search an entire volume disk but only want selected files.

/FORMAT=keyword

Specifies the volume storage format. Valid formats include:

/INITIALIZE

/NOINITIALIZE (default)

The /INITIALIZE qualifier initializes a volume before the save operation starts.

Restrictions:

Use this qualifier only if the volume has been allocated.

WHEN the . . .

THEN the . . .

SLS software selects a volume for you.

/INITIALIZE qualifier is automatically specified unless the volume is an optical cartridge.

Volume is an optical cartridge.

Initialization process can only be done one time.

The /NOINITIALIZE qualifier is the default.

/LENGTH=number

Specifies the volume length of tape media. The default length is site specific.

/LOG

/NOLOG (default)

The /LOG qualifier records the specifications of the individual saved files in the log file of the batch job. The log file is placed in your SYS$LOGIN directory with the file name of SAVE_SET.LOG.

The /NOLOG qualifier is the default.

/MEDIA_TYPE=type

Specifies the type of media. Examples are 9-track or TK50. The default media type is site specific.

/MODIFIED

Selects files according to the date the file was last modified.

Restriction:

This qualifier must be used with either the /BEFORE or /SINCE qualifiers.

/NOTES="string"

Writes the notes string to the notes field of the SLS record for each volume used in the save operation.

IF you want to . . .

THEN . . .

AND . . .

Perform standby archiving.

Specify the
/VOLUME=ARCHIVE qualifier

Specify the archive class as the first eight characters in the /NOTES string by:

  • Placing the archive class before any notes to the volume
  • Using a space to separate the archive class from the note information
  • Enclosing the entire note string in quotation marks

Use a FOREIGN volume

Specify
/VOLUME=FOREIGN

Specify the label for the volume as the first six characters in the /NOTES string.

The notes are displayed when you use either the STORAGE SHOW VOLUME or STORAGE SHOW VOLUME/SUMMARY commands.

/OWNER=uic

Saves the files owned by the specified UIC.

Requirement:

Write access to the files is necessary.

/POOL=pool-name

Selects a volume for the save operation from the specified pool instead of the default pool.

/POST_PROCESSING="command"

Specifies a DCL command to execute after the save operation completes, enclosed within quotation marks.

Restriction:

This qualifier cannot be used with the /SCREEN qualifier.

/PRE_PROCESSING="command"

Specifies a DCL command to execute before the save operation begins, enclosed within quotation marks.

Restriction:

This qualifier cannot be used with the /SCREEN qualifier.

/QUALIFIERS="/qualifier[/qualifier . . . ]"

Applies the specified qualifiers to the VMS BACKUP command.

When to use:

Use this qualifier when the qualifier you need is not available with the STORAGE SAVE command (such as /BLOCK and /BUFFER).

/RECLENGTH=number

Specifies the record length in bytes.

Restriction:

This qualifier applies to the EBCDIC format only.

/RECORD

/NORECORD (default)

The /RECORD qualifier records the backup information in the on-line user history file. The on-line history file is used for subsequent reporting with the STORAGE REPORT command and RESTORE operations. The history information consists of the:

Requirement:

The /RECORD qualifier must be used with the /STORAGE SAVE command if you want to create an on-line user history file for each file that is saved.

/SAVE_SET=save-set

Specifies the name of the save set written to the volume. If this qualifier is omitted, then the SLS software assigns a save set default name of ddmmmyy_hhmm.BCK,

Where:

dd = current day
mmm = current month
yy = current year
hh = current hour
mm = current minute

Character_limit:

Specify up to 17 characters.

/SINCE=time

Selects files that are equal to or later than the specified date and time.

When to use:

Use this qualifier to select the files with a time value using one of the following qualifiers:

Restriction:

You can use only one of the above four qualifiers at a time in the command line.

/SCRATCH_DATE=date

Specifies the date a volume enters the retention period before being freed. The default scratch date is one year from the date of the BACKUP. Allowed values are site specific.

/SCREEN

Displays the SAVE screen from the SLS menu options.

Restriction:

You cannot save an Oracle Rdb database from this screen.

/USER_NAME=user-name

Performs a save operation on behalf of another user.

Requirements and restrictions:

This qualifier:

/VERIFY

/NOVERIFY (default)

The /VERIFY qualifier performs a compare operation after the save operation. This qualifier compares the:

The /NOVERIFY qualifier is the default.

/VOLUME=volume-id

Uses a specified volume in a volume set for the save operation.

IF you are . . .

THEN . . .

AND . . .

Performing standby archive.

Specify the
/VOLUME=ARCHIVE qualifier with the
/NOTES="string" qualifier

Specify first word in the /NOTES string by:

  • Placing the archive class before any notes to the volume
  • Using a space to separate the archive class from the note information
  • Enclosing the entire note string in quotation marks

Use a FOREIGN volume

Specify
/VOLUME=FOREIGN

Specify the label for the volume as the first word in the /NOTES string.

Case-sensitive qualifier:

The word ARCHIVE is case sensitive. Enter in uppercase.

Examples

The following examples illustrate the STORAGE SAVE command.


  1. $ STORAGE SAVE *.TXT/FORMAT=BACKUP/LOG/RECORD

    Result:

    This example:
    Saves all files with the .TXT file extension in the current default directory
    Specifies the format of the volume is BACKUP
    Creates a log file of the files saved
    Records the backup information (date, file name, save set name, volume and time of backup) in the user's on-line history file

  2. $ STORAGE SAVE/INITIALIZE/DENSITY=2400/VOLUME=VOL77 RECORD238.TXT/LOG

    Result:

    This example:
    Initializes VOL77
    Specifies the tape media has a recording density of 2400 bpi
    Saves the file RECORD238.TXT onto volume VOL77
    Creates a log file for the file RECORD238.TXT

  3. $ STORAGE SAVE/VOLUME=ARCHIVE/NOTES="FOREVER, Reports" JULRPT.TXT

    Result:

    This example:
    Saves the file JULRPT.TXT using standby archive
    Specifies that the archive class is FOREVER, which must be the first word in the /NOTES string stated before the Reports notes

STORAGE SELECT

The STORAGE SELECT command chooses a drive that:

If the ALLDEV symbol in the file TAPESTART.COM is not empty, the operator is asked to select a drive. Otherwise, MDMS selects a drive.

For MDMS software drive selection, the following applies to the ALLDEV and SELDEV symbols in the file TAPESTART.COM:

After the SELECT command is issued, the name of the drive is displayed on the terminal screen. The DCL SHOW LOGICAL command also displays the drive's name.

If the specified volume is in a jukebox, the drive selected is from the same jukebox.

Formats

$ STORAGE SELECT logical-name volume-id
$ STORAGE SELECT logical-name /MEDIA_TYPE=type
$ STORAGE SELECT logical-name /DRIVE=drive name

Parameters

logical-name

Specifies the logical name to be assigned to the tape device. The logical name:

The logical name cannot be longer than 31 characters.

volume-id

Specifies the name of the volume for which an appropriate drive is to be selected.

Description

When the STORAGE SELECT command completes, the drive name is displayed on the terminal screen.

If the specified drive is assigned to the SELDEV symbol in the file SYS$MANAGER:TAPESTART.COM, then the drive is allocated without human operator intervention.

MDMS informs you if there is no drive available and, based on your configuration, does one of the following:

When selecting a drive, it is important that the MDMS software knows the density of the volume to be loaded. This ensures that a drive capable of the proper density is allocated for the job.

Qualifiers

/DENSITY=value

Specifies either the density (in bpi) for tape volumes or the data compaction and record blocking option for TK90K cartridges. The meaning of this parameter depends upon the type of drive being used.

IMPORTANT: Note that the /DENSITY qualifier should be used when you have to specify a change in the kind of media. You should NOT specify /DENSITY as a selection criterion.

IF the volume is being loaded onto . . .

THEN use this qualifier . . .

a TA90 or TA90E cartridge system

/MEDIA_TYPE=keyword

all other devices

/DENSITY=keyword

Examples:

1600, 6250

Allowed values for this qualifier are site-dependent. See your storage administrator for the valid density values at your site.

When to use this qualifier:

Use this qualifier when the:

Do not use this qualifier if the recording density does not apply to media at your site.

/DRIVE=device-name

Specifies the particular drive to allocate.

/MEDIA_TYPE=type

Specifies the type of media that the drive must support, such as 9-track, TK50, or RV02K media.

/REPLY=symbol

Selects requests that require operator intervention and stores the operator's reply in the specified local DCL symbol. The symbol defined contains the text of the operator's reply in the DCL REPLY/TO or DCL REPLY/ABORT command if the operator becomes involved in the selection of the drive.

/WAIT=[interval] (default)

/NOWAIT

The /WAIT qualifier (default) specifies the STORAGE SELECT command to wait until a drive is available. The MDMS software checks once a minute (default) for an available drive. To specify another time interval, supply a delta time with the /WAIT qualifier. The /NOWAIT qualifier disables waiting. An error is returned if the drive is not available.

Examples

  1. $ STORAGE SELECT/WAIT=0:0:20 MY$DRIVE LAB003

    This example:

    Selects a drive that supports the media type and density of volume LAB003
    Assigns the logical name MY$DRIVE to the selected drive
    Allocates the drive to the process
    If a drive is not available, checks every 20 seconds for an available drive
  2. $ STORAGE SELECT MY$DRIVE/MEDIA_TYPE=RV02K

    This example selects a drive that supports RV02K optical cartridges and displays a message similar to the following:

    %DCL-I-ALLOC, _VENUS$MUC0: allocated .

STORAGE SET VOLUME

The STORAGE SET VOLUME command modifies the attributes of a specified volume or volume set.

Format

$ STORAGE SET VOLUME volume-id

Restrictions

Parameters

volume-id

Specifies the volume ID of the volume to be modified. See Required Privileges to Modify Volumes lists the privileges required to use the associated qualifiers.

  1. Required Privileges to Modify Volumes
  2. Qualifier

    Owned Volumes

    Unowned Volumes

    /ACCOUNT

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /ALLOCATED

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /AVAILABLE

    PRIV_MODANY

    PRIV_MODANY

    /BLOCK FACTOR

    PRIV_MODOWN,

    PRIV_MODOWN,

    PRIV_MODANY

    /BRAND

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /CLEANED

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /DENSITY

    PRIV_MODOWN

    PRIV_MODOWN

    /FORMAT

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /FREED

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /INITIALIZED

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /IO_ERROR_COUNT

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /JOB_NAME

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /LAST_ACCESS

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /LENGTH

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /LOCATION

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /MEDIA_TYPE

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /MOUNT_COUNT

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /NOTES

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /OFFSITE

    PRIV_MODANY

    PRIV_MODANY

    /ONSITE

    PRIV_MODANY

    PRIV_MODANY

    /OTHER_SIDE

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /OWNER

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /POOL

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /PROTECTION

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /RECLENGTH

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /RETAIN

    PRIV_MODANY

    PRIV_MODANY

    /SCRATCH_DATE

    PRIV_MODOWN

    PRIV_MODOWN,

    PRIV_MODANY

    /SIDE

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /SLOT

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /UNAVAILABLE

    PRIV_MODOWN,

    PRIV_MODANY

    PRIV_MODOWN,

    PRIV_MODANY

    /ZERO

    PRIV_CLEAN

    PRIV_CLEAN

Unless otherwise stated, each qualifier affects:

One side of double-sided media
The specified volume of a volume set

/ACCOUNT=string

Modifies the account name of the volume.

/ALLOCATED=date

Modifies the date the volume was allocated.

Specify absolute or combination time.

/AVAILABLE

Places a volume into the free or transition state (determined by your site) if the volume is currently in the down state.

/BLOCK_FACTOR=number

Modifies the number of records per physical tape block.

This qualifier should be used with the EBCDIC format only.

/BRAND=text

Modifies the volume manufacturer, such as Digital.

Specify 1 to 16 characters.

/CLEANED=date

Modifies the date the volume was last cleaned.

Specify absolute or combination time.

/DENSITY=value

Specifies either the density (in bpi) for tape volumes or the data compaction and record blocking option for TK90K cartridges. The meaning of this parameter depends upon the type of drive being used.

IMPORTANT: Note that the /DENSITY qualifier should be used when you have to specify a change in the kind of media. You should NOT specify /DENSITY as a selection criterion.

IF the volume is being loaded onto . . .

THEN use this qualifier . . .

a TA90 or TA90E cartridge system

/MEDIA_TYPE=keyword

all other devices

/DENSITY=keyword

Examples:

1600 bpi, 6250 bpi.

Allowed values for this qualifier are site-dependent.

Use this qualifier when the:

Do not use this qualifier if the recording density does not apply to media at your site.

/FORMAT=keyword

Modifies the volume to have one of the following formats:

/FREED=date

Modifies the volume's freed date (the date the allocated volume entered the transition or free state).

/INITIALIZED=date

Modifies the initialization date of the volume.

Specify absolute or combination time.

/IO_ERROR_COUNT=number

Modifies the error count on a volume (the default is zero).

/JOB_NAME=name

Modifies the controlling job name.

Specify 1 to 12 characters.

/LAST_ACCESS=date

Modifies the date a volume was last accessed.

/LENGTH=number

Modifies the volume length of tape media. This qualifier does not affect a volume that is double-sided media.

/LOCATION=text

Modifies the location of a volume, such as HEADQUARTERS. This qualifier affects both sides of a volume that is double-sided media.

Specify 1 to 16 characters.

/MEDIA_TYPE=keyword

This qualifier is used to change the media type of the specified volume.

Using this qualifier requires:

/MOUNT_COUNT=value

Modifies the mount count on a volume.

/NOTES="string"

Modifies the notes field of a volume. This qualifier affects all the volumes of a volume set.

Specify 1 to 64 characters.

/OFFSITE=date

Modifies the date that a volume is to be sent off site. This qualifier affects both sides of a volume that is double-sided media.

Specify absolute or combination time.

/ONSITE=date

Modifies the date for a volume to be brought on site. This qualifier affects both sides of a volume that is double- sided media.

Specify absolute or combination time.

/OTHER_SIDE=name

Modifies the name of the volume on the opposite side of a double-sided volume.

/OWNER=uic

Modifies the owner field on a volume.

/POOL=pool-name

Modifies the pool name for a particular volume.

Specify 1 to 12 characters. Spaces are not allowed.

/PROTECTION=code

Modifies the protection code of a volume. Specify the standard OpenVMS format. The default protection code is site-specific.

This qualifier affects the entire volume set (no matter which volume in the set is specified).

/RECLENGTH=number

Modifies the record length in bytes.

This qualifier is used for the EBCDIC format only.

/RETAIN

Returns the specified volume or volume set (currently in the transition or free state) to its former owner.

Use this qualifier to recover an unintentionally freed volume.

The following table describes the /RETAIN qualifier process.

WHEN...

THEN...

a volume is retained from the free state

none of the user history files remain.

the specified volume is not part of a volume set

the volume can be retained.

the specified volume is the first volume in a volume set, and all volumes in the set can be retained

the entire volume set can be retained.

any specified volumes in a volume set can be retained

those volumes are retained.

  • IF any volumes from the volume set cannot be retained,
  • THEN those volumes are not retained.

the specified volume is the first volume in a volume set

AND:

  • Some volumes in the volume set can be retained
  • Some volumes in the volume set cannot be retained

the volume cannot be retained.


/SCRATCH_DATE=date

Modifies the date a volume enters the transition state before it enters the free state. This qualifier affects the entire volume set (no matter which volume in the set is specified).

/SIDE=A

/SIDE=B

Specifies Side A or Side B of a volume that is double-sided media.

/SLOT=text

Modifies a storage slot location where a volume is stored. This qualifier affects both sides of a volume that is double-sided media.

Specify 1 to 8 characters.

/UNAVAILABLE

Places a volume in the down state (the volume is no longer in service).

/USER_NAME=user-name

Modifies the user's name (owner's field in a volume record). This qualifier affects the entire volume set (no matter which volume in the set is specified).

/ZERO

Sets the volume error and mount count of a volume to zero (0), and sets the date the volume was last cleaned to the current date and time.

Examples

  1. $ STORAGE SET VOLUME TEST00/SCRATCH_DATE=01-AUG-1996 /SLOT=BIN4/ZERO

    This example modifies the attributes of TEST00, that:
    Specifies that volume TEST00 enter the transition state 01-AUG-1996
    Changes the storage slot to BIN4
    Changes the mount and error counts to zero (0)
  2. $ STORAGE SET VOLUME/RETAIN VOL43/FORMAT=ASCII /NOTES="Personnel"

    This example:
    a. Returns volume VOL43 to its former owner
    b. Changes the volume format to ASCII
    c. Modifies the notes string for the volume
  3. $ STORAGE SET VOLUME/NOTES=" " VOL13

    This example erases the notes on volume VOL13.
    A space is required between the quotation marks to erase the notes field.

STORAGE SHOW JUKEBOX

The STORAGE SHOW JUKEBOX command lists information about a tape jukebox. If you omit the tape_jukebox_name parameter, all defined jukeboxes are displayed.

Format

$ STORAGE SHOW JUKEBOX [tape_jukebox_name]

Parameters

tape_jukebox_name

The name of the jukebox whose contents you wish to display.

Qualifiers

None.

Examples

  1. $ STORAGE SHOW JUKEBOX TESTJUKE

    Tape jukebox TESTJUKE, contains robot NODEA::JUA0:, contains 3 drives.

    Drive Drive Status NODEA::$1$MUA21: Available
    NODEA::$1$MUA22: Available
    NODEA::$1$MUA23: Available

    This example displays information about a specific jukebox.
  2. $ STORAGE SHOW JUKEBOX

    Tape jukeboxes TESTJUKE, DUMMY_JUKE are configured.
    Tape jukebox TESTJUKE, contains robot NODEA::JUA0:, contains 3 drives.

    Drive Drive Status NODEA::$1$MUA21: Available
    NODEA::$1$MUA22: Available
    NODEA::$1$MUA23: Available

    Tape jukebox DUMMY_JUKE, contains robot NODEB::$1$MIA3:, contains 1 drive.

    Drive Drive Status
    NODEB::$1$MIA3: Allocated

    This example displays information about all known jukeboxes.

STORAGE SHOW LAST_ALLOCATED

The STORAGE SHOW LAST_ALLOCATED command displays the last volume allocated to the current or specified user.

Format

$ STORAGE SHOW LAST_ALLOCATED

Parameters

None.

Description

This command is useful for adding files or save sets to the last volume you allocated.

Use the STORAGE SHOW LAST_ALLOCATED command to show the last volume allocated to a specific user name.

Using the /SYMBOL qualifier places the volume ID of the last volume assigned to you into a DCL symbol in your local symbol table. The symbol is called SLS$LASALL_VOLUME.

The following optional qualifiers can be used with the STORAGE SHOW LAST_ALLOCATED command.

Qualifiers

/SYMBOLS

/NOSYMBOLS (default)

The /SYMBOLS qualifier creates the local DCL symbol SLS$LASALL_VOLUME to contain the last allocated volume ID. When this qualifier is used, information is not displayed to the terminal screen.

Use this qualifier in command files to determine which volumes have been allocated.

Using the /SYMBOL qualifier places the volume ID of the last volume assigned to you into a DCL symbol in your local symbol table. The symbol is called SLS$LASALL_VOLUME.

The /NOSYMBOLS qualifier is the default.

/USER_NAME=user-name

Specifies the user's name. Locates the volume last allocated to another user.

This qualifier requires the OPER privilege.

Example

$ STORAGE SHOW LAST_ALLOCATED/SYMBOLS
$ SHOW SYMBOL/LOCAL/ALL
SLS$LASALL_VOLUME ="VOL3"

This example:

STORAGE SHOW MAGAZINE

The STORAGE SHOW MAGAZINE command displays information about a magazine that is contained in the MDMS Magazine database. It displays the associated MDMS volume ID for each cartridge in that magazine and the jukebox name if the magazine is imported. If the magazine is imported, the jukebox slots are displayed.

Format

$ STORAGE SHOW MAGAZINE [magazine_name]

Parameters

magazine_name

The name of the magazine. If you do not provide a magazine name, MDMS displays a list of all magazines in the magazine database.

Qualifiers

/OUTPUT=filename

This directs the output to the specified file instead of the terminal.

Examples

  1. $ STORAGE SHOW MAGAZINE

    Magazine Tape Jukebox Tape Jukebox Magazine Name Name Start Slot Size ABSMAG01 Not imported 7 slots BARBMAG1 Not imported 11 slots BARBMAG2 Not imported 11 slots JMSMAG1 Not imported 7 slots MYMAG1 Not imported 11 slots TESTMAG Not imported 4 slots

    This example displays basic information about all magazines in the magazine database.
  2. $ STORAGE SHOW MAGAZINE MAG1

    MAG1, is not imported into a tape jukebox, size is 11 slots.

    Magazine Jukebox Volume Volume Volume Volume
    Slot Slot ID Type State Locaion
    0 - Slot empty
    1 - Slot empty
    2 - DEC031 SLS volume
    3 - Slot empty
    4 - Slot empty
    5 - DEC017 SLS volume
    6 - Slot empty
    7 - Slot empty
    8 - DEC019 SLS volume
    9 - Slot empty
    10 - Slot empty

    This example displays information about an 11-slot magazine that is not imported.
  3. $ STORAGE SHOW MAGAZINE MAG2

    MAG2, is imported into tape jukebox JUKE1,
    magazine size is 7 slots.

    Magazine Jukebox Volume Volume Volume Volume
    Slot Slot ID Type State Location
    0 0 VOL3 SLS volume Allocated In Drive
    1 1 VOL1 SLS volume Free In Slot
    2 2 Slot empty
    3 3 Slot empty
    4 4 Slot empty
    5 5 Slot empty
    6 6 ABS006 non-SLS volume

    This output displays information about a 7-slot magazine that is imported into a jukebox.

STORAGE SHOW VOLUME

The STORAGE SHOW VOLUME command displays information about volumes or volume sets. You can display:

Formats

$ STORAGE SHOW VOLUME volume-id
$ STORAGE SHOW VOLUME/FORECAST
$ STORAGE SHOW VOLUME/SUMMARY

Restrictions

Using the STORAGE SHOW VOLUME command to show volumes not allocated to the current process requires that:

Parameters

/FORECAST

Lists all volumes due to be freed in the order of their scratch dates. Within the report, a dash (-) in front of the volume ID indicates the first volume in the volume set.

This qualifier cannot be used with the volume-id parameter and must appear before any other qualifier.

/OUTPUT=file-spec

Specifies the output file in which to store volume information. The default is the terminal display.

This qualifier cannot be used with the /SYMBOLS qualifier.

/SYMBOLS

/NOSYMBOLS (default)

The symbols qualifier creates local DCL symbols that contain information about the specified volume.

This qualifier cannot be used with any other SHOW VOLUME qualifier.

WHEN...

THEN...

the /SYMBOLS qualifier is specified for a volume that is not part of a volume set

only information about the specified volume is returned.

the /SYMBOLS qualifier is used with multivolume sets

only information about the specified volume is placed in the symbols. To get information about other volumes in the volume set, use the SLS$INQ_NEXT_VOLUME symbol to step through the memebers of a volume set.

STORAGE SHOW VOLUME symbols:

SLS$INQ_VOLUME

SLS$INQ_UIC

SLS$INQ_REC_LEN

SLS$INQ_OWNER

SLS$INQ_LOCATION

SLS$INQ_BLOCK_FACTOR

SLS$INQ_FORMAT

SLS$INQ_PROTECTION

SLS$INQ_INITIALIZED

SLS$INQ_BRAND

SLS$INQ_NOTES

SLS$INQ_MEDIA_TYPE

SLS$INQ_ALLOCATED

SLS$INQ_OFFSITE

SLS$INQ_SLOT_NUMBER

SLS$INQ_SCRATCH

SLS$INQ_ONSITE

SLS$INQ_SIDE

SLS$INQ_PURCHASED

SLS$INQ_IO_ERRORS

SLS$INQ_OTHER_SIDE

SLS$INQ_CLEANED

SLS$INQ_FLAG

SLS$INQ_JUKEBOX

SLS$INQ_DENSITY

SLS$INQ_NEXT_VOLUME

SLS$INQ_JUKE_SLOT

SLS$INQ_LENGTH

SLS$INQ_PREVIOUS

SLS$INQ_DRIVE

SLS$INQ_MOUNTS

SLS$INQ_POOL

SLS$INQ_STATUS

The /NOSYMBOLS qualifier is the default.

/SUMMARY

Specifies all volumes allocated to a user and sorted by volume ID. This qualifier does not require a parameter. Within the report, a dash (-) in front of the volume ID indicates the first volume in a volume set.

This qualifier cannot be used with the volume-id parameter and must be specified before any other command qualifier in the command line.

/USER_NAME=user-name

Specifies the user's name and applies to the /FORECAST and /SUMMARY qualifiers when entering the STORAGE SHOW VOLUME command on another user's volumes.

This qualifier requires the MDMS SEEANY privilege.

Examples

  1. $ STORAGE SHOW VOLUME DEC031

    Volume is in a jukebox slot.
    Volume is bound to slot 2 in magazine MAG1.

    Displays all information in the volume database relating to volume DEC031.
  2. Volume:

    DEC031

    Owner:

    VENUS::SMITH

    Format:

     

    Brand:

     

    Allocated:

    16-NOV-1996 14:12

    Scratch:

    31-DEC-9999 23:59

    Purchased:

    16-NOV-1996 14:12

    Cleaned:

    16-NOV-1996 14:12

    Media type:

    TK85K

    Length:

    0

    Mounts:

    0

    UIC:

    [0,0]

    Location:

    HEADQUARTERS

    Protection:

    S:RW,O:RW,G:R,W:

    Notes:

     

     

     

    Offsite:

     

    Onsite:

     

    IO Errors:

    0

    Flag:

    FREE

    Next volume:

    *none*

    Previous:

    *none*

    Pool:

     

    Rec len: 0

    Block factor: 0

    Initialized:

    16-NOV-1996 14:12

    Density:

     

    Slot number:

     

     

     

    Side:

     

    Other side:

     

    Jukebox / slot:

    TESTJUKE / 112

     

     

    Drive:

     

     

     

  3. $ STORAGE SHOW VOLUME/SUMMARY

    This example lists all the volumes owned by the requesting user. The volumes are part of volume set ATLAS6.

    Volume Allocated Scratch Format Notes
    -ATLAS6 3-FEB-1996 3-FEB-1997 BACKUP
    ATLAS7 15-MAR-1996 15-MAR-1997 BACKUP
    ATLAS8 15-MAR-1996 15-MAR-1997 BACKUP

The dash (-) in front of the volume ATLAS6 indicates that this is the first volume in a volume set.

STORAGE SPLIT

The STORAGE SPLIT command separates a volume set into two volumes or volume sets.

Format

$ STORAGE SPLIT volume-id

Restrictions

Parameters

volume-id

Specifies the volume ID of the volume in a volume set before which the separation occurs. The specified volume becomes the first volume of a separate volume set.

The volume-id parameter cannot be the first volume in the volume set.

Qualifiers

/USER_NAME=user-name

Specifies the user's name.

This qualifier requires the OPER privilege.

Examples

  1. $ STORAGE SPLIT VOLUME_ID

    All volumes that:
    Precede the specified volume belong to the first volume set
    Follow the specified volume belong to the second volume set
  2. $ STORAGE SHOW VOLUME/SUMMARY (1)

    Volume Allocated Scratch Format Notes
    -VOL1 15-MAR-1996 25-NOV-1996 BACKUP Engineering
    VOL2 15-MAR-1996 25-NOV-1996 BACKUP Engineering
    VOL3 20-APR-1996 20-DEC-1996 BACKUP Personnel
    VOL4 22-APR-1996 21-DEC-1996 BACKUP Reports
    $
    $ STORAGE SPLIT VOL3 (2)
    $
    $ STORAGE SHOW VOLUME VOL1 (3)
    Volume: VOL1 Owner: VENUS::JONES
    .
    .
    .
    Next volume: VOL2 Previous: *none*
    .
    .
    .
    $ STORAGE SHOW VOLUME VOL3
    Volume: VOL3 Owner: VENUS::JONES
    .
    .
    .
    Next volume: VOL4 Previous: *none* . . .

    (1) The STORAGE SHOW VOLUME/SUMMARY command lists the volumes allocated to user JONES. Note that VOL1 is the first volume of the volume set.
    (2) The STORAGESPLIT command splits volume set VOL1 at VOL3, creating two volume sets.
    (3) The next two STORAGE SHOW VOLUME commands show volume sets VOL1 and VOL3. Volume set VOL1 now contains VOL1 and VOL2. Volume set VOL3 now contains volumes VOL3 and VOL4.

STORAGE STARTUP SYSTEM_BACKUP

The STORAGE STARTUP SYSTEM_BACKUP command manually starts a system backup or an Oracle RMU backup.

Format

$ STORAGE STARTUP SYSTEM_BACKUP file-spec submit-time

Parameters

file-spec

Specifies the name of the backup parameter file that the SLS software executes to perform the system backup. The backup parameter file *_SBK.COM, or *_DBSBK.COM for Oracle RMU backups, resides in the SLS$SYSBAK directory. When formatting this command, the _SBK.COM can be omitted.

submit-time

Specifies the time at which the job should be started.

Restrictions

Qualifiers

None.

Example

The following example illustrates the STORAGE STARTUP SYSTEM_BACKUP command.

$ STORAGE STARTUP SYSTEM_BACKUP MAY2989

Result:

Performs a manual system backup using SLS$SYSBAK:MAY2989_SBK.COM.

STORAGE UNBIND

The STORAGE UNBIND command unbinds the specified volume from the magazine and removes the volume name from the MDMS magazine database.

Format

$ STORAGE UNBIND volume_id magazine_name

Parameters

volume_id

The name of the volume to unbind.

magazine_name

The name of the magazine from which to unbind the specified volume.

Restrictions

Note that you cannot unbind a volume from an imported magazine.

Qualifiers

None.

Example

$ STORAGE UNBIND MYVOL MAGNUM1

Unbinds the volume MYVOL from the magazine MAGNUM1, assuming that MAGNUM1 is not imported.

STORAGE UNLOAD DRIVE

The STORAGE UNLOAD DRIVE command unloads a volume from a specific drive. When unloading a drive within a tape jukebox, the volume is returned to its home slot.

Format

$ STORAGE UNLOAD DRIVE drive_name

Parameters

drive_name

The name of the drive from which to unload the volume.

Restrictions

Requires the OPER privilege if you are unloading a drive not allocated to the requesting process.

Qualifiers

None.

Example

$ STORAGE UNLOAD DRIVE MUA0

Unloads any volume currently in drive MUA0.

STORAGE UNLOAD VOLUME

The STORAGE UNLOAD VOLUME command unloads a specified volume from a drive. When unloading a volume within a tape jukebox, the volume is returned to its home slot.

Format

$ STORAGE UNLOAD VOLUME volume-id

Restrictions

Parameters

volume-id

Specifies the name of the volume to unload from a drive.

Description

This command is useful for:

Qualifiers

None.

Example

$ STORAGE UNLOAD VOLUME FY1996

Unloads volume FY1996 from the drive on which it is loaded.

Index

A

ADD DRIVE command 1-2

ADD VOLUME command 1-4

format 1-4

ALLDEV 1-2, 1-38

Symbols

ALLDEV 1-68

ALLOCATE command 1-9

APPEND command 1-13

C

Commands

DCL 1-1

CREATE LABEL command 1-18

D

DCL 1-1

E

EXPORT ACS command 1-21

EXPORT CARTRIDGE command 1-23

EXPORT MAGAZINE command 1-24

F

format 1-87

H

How to

split volume sets 1-85

I

IMPORT ACS command 1-25

IMPORT CARTRIDGE command 1-27

IMPORT MAGAZINE command 1-29

INVENTORY ACS command 1-30

INVENTORY JUKEBOX command 1-32

L

LABEL command 1-34

LOAD command 1-35

R

RELEASE command 1-37

REMOVE DRIVE command 1-38

REMOVE MAGAZINE command 1-39

REMOVE VOLUME command 1-40

REPORT FILE command 1-41

description 1-41

examples 1-43

format 1-41

parameter 1-41

qualifiers 1-41

restrictions 1-41

REPORT SLOT command 1-44

REPORT SYSTEM command

description 1-46

example 1-47

format 1-46

parameters 1-46

qualifiers 1-46

restrictions 1-46

REPORT VOLUME command 1-49

parameter fields 1-49

REQUEUE command 1-54

RESTORE command 1-55

description 1-55

example 1-59

format 1-55

parameters 1-55

restrictions 1-55

S

SAVE command 1-60

examples 1-66

format 1-60

parameters 1-60

qualifiers 1-60

restrictions 1-60

SELECT command 1-68

SET VOLUME command 1-71

SHOW JUKEBOX command 1-78

SHOW LAST_ALLOCATED command 1-79

SHOW MAGAZINE command 1-80

SHOW VOLUME command 1-82

SPLIT command 1-85

description 1-85

Splitting volume sets

procedure 1-85

STARTUP SYSTEM_BACKUP command 1-87

example 1-87

parameters 1-87

qualifiers 1-87

restrictions 1-87

STORAGE

ADD MAGAZINE 1-3

ADD VOLUME 1-4

ALLOCATE 1-9

APPEND 1-13

BIND 1-17

CREATE LABEL 1-18

DEALLOCATE 1-19

EXPORT ACS 1-21

EXPORT CARTRIDGE 1-23

EXPORT MAGAZINE 1-24

IMPORT ACS 1-25

IMPORT CARTRIDGE 1-27

INVENTORY ACS 1-30

INVENTORY JUKEBOX 1-32

LABEL 1-34

LOAD 1-35

RELEASE 1-37

REMOVE DRIVE 1-38

REMOVE MAGAZINE 1-39

REMOVE VOLUME 1-40

REPORT FILE 1-41

REPORT SLOT 1-44

REPORT SYSTEM

REPORT SYSTEM command 1-46

REPORT VOLUME 1-49

REQUEUE 1-54

RESTORE 1-55

SAVE 1-60

SELECT 1-68

SET VOLUME 1-71

SHOW JUKEBOX 1-78

SHOW LAST_ALLOCATED 1-79

SHOW MAGAZINE 1-80

SHOW VOLUME 1-82

SPLIT 1-85

STARTUP SYSTEM_BACKUP 1-87

UNBIND 1-88

UNLOAD DRIVE 1-89

UNLOAD VOLUME 1-90

STORAGE Commands 1-1

STORAGE IMPORT MAGAZINE 1-29

SYMBOLS

ALLDEV 1-38

Symbols

ALLDEV 1-2

T

TAPESTART.COM

ALLDEV 1-2, 1-38, 1-68

U

UNBIND command 1-88

UNLOAD DRIVE command 1-89

UNLOAD VOLUME command 1-90

V

Volume allocation

showing the last allocated 1-79