Order Number: AA-MR19C-TE Revision/Update Information: Revised for ALL-IN-1 Version 3.0 Operating system: VMS Version 5.4 and higher Software version: Version 3.0 Digital Equipment Corporation Maynard, Massachusetts __________________________________________________________ The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Possession, use, duplication, or dissemination of the software described in this document is authorized only pursuant to a valid written license from Digital or the third-party owner of the software copyright. No responsibility is assumed for the use or reliability of software on equipment that is not supplied by Digital Equipment Corporation. © Digital Equipment Corporation 1985 to 1992. All Rights Reserved. The following are trademarks of Digital Equipment Corporation: ALL-IN-1, CDA, DECdx/RSTS, DECmail, DECnet, DECpage, DECtalk, DECwindows, DX, EDT, MicroVAX, TOPS- 20, VAX, VAXcluster, VAX DATATRIEVE, VAX FMS, VAX Notes, VAX RALLY, VAX TEAMDATA, VAX VTX, VMS, WPS-PLUS, and the DIGITAL logo. ACMS is a trademark of McDonnell Douglas H.I.S. Division. Bell is a trademark of Bell telephone companies. Ethernet is a trademark of Xerox Corporation. PostScript is a registered trademark of Adobe Systems, Inc. Vadic is a trademark of Racal-Vadic. Motif is a registered trademark of Open Software Foundation, Inc. WordPerfect is a trademark of WordPerfect Corp. This document was prepared using VAX DOCUMENT, Version 2.0. ________________________________________________________________ Contents 1 Introduction 1.1 Installation from a Compact Disc................ 1-1 1.2 Installation from a Tape or Cartridge........... 1-2 2 US Installation 2.1 Installation from a CD.......................... 2-1 2.2 Installation from a Tape or Cartridge........... 2-1 2.3 English Language Component...................... 2-1 2.3.1 Useful Information for the English Language Component..................................... 2-2 2.3.2 Disk Space Required on the Installation Working Disk During Installation.............. 2-2 2.3.3 Disk Space Required for the Language Files for a Fresh Installation.......................... 2-3 2.3.4 Optional Products ............................ 2-6 2.4 US Market Component............................. 2-6 2.4.1 Useful Information for the US Market Component..................................... 2-6 2.5 Keyboard Support................................ 2-7 2.6 Modems Supported................................ 2-9 3 GB Installation 3.1 Installation from a CD.......................... 3-1 3.2 Installation from a Tape or Cartridge........... 3-1 3.3 British Language Component...................... 3-2 3.3.1 Useful Information for the British Language Component..................................... 3-3 3.3.2 Disk Space Required on the Installation Working Disk During Installation.............. 3-3 iii 3.3.3 Disk Space Required for the Language Files for a Fresh Installation.......................... 3-5 3.3.4 Optional Products ............................ 3-7 3.4 GB Market Component............................. 3-7 3.5 Useful Information for the GB Market Component.. 3-8 3.6 Keyboard Support................................ 3-9 3.7 Modems Supported................................ 3-10 Tables 2-1 Useful Information for the English Language Component..................................... 2-2 2-2 Disk Space Required on the Working Disk During Installation.................................. 2-3 2-3 Disk Space Required For the Language File Areas For a Fresh Installation or New Additional Language........................... 2-4 2-4 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 Version 2.3 or Version 2.4................................ 2-4 2-5 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 STARTER Version 1.0 or Version 2.4.................... 2-5 2-6 Useful Information for the US Market Component..................................... 2-7 2-7 Autodial Modems Supported by ALL-IN-1 ........ 2-9 3-1 Useful Information for the British Language Component..................................... 3-3 3-2 Disk Space Required on the Working Disk During Installation.................................. 3-5 3-3 Disk Space Required For the Language File Areas For a Fresh Installation................ 3-5 3-4 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 Version 2.3 or Version 2.4................................ 3-6 3-5 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 STARTER Version 1.0 or Version 2.4.................... 3-6 3-6 Useful Information for the GB Market Component..................................... 3-8 iv 3-7 Autodial Modems Supported by ALL-IN-1 ........ 3-10 v 1 ________________________________________________________________ Introduction This document is for the person responsible for installing ALL-IN-1 Version 3.0. It describes information specific to the ALL-IN-1 Version 3.0 US kit, and GB kit. These kits contain the market and language components. This document does not, by itself, describe the installa- tion of your ALL-IN-1 Version 3.0 US kit or GB kit. 1.1 Installation from a Compact Disc Your compact disc (CD) has the following components: o English language component o British dialect component o US market component o GB market component Use the English language component to install either American English or British English, but if you are installing British English, you must also specify the British Dialect code during the installation procedure. The market component is installed as part of the main ALL-IN-1 installation procedure. See the ALL-IN-1 Installation Guide Part 1 Base Installation. You need to refer to the information in this book, when performing an installation involving the English language component, the British dialect, or either of the market components covered. Introduction 1-1 Introduction 1.1 Installation from a Compact Disc ________________________Note ________________________ This document refers to American English as English and to British English as British. _____________________________________________________ 1.2 Installation from a Tape or Cartridge The US tape and cartridge and the GB tape and cartridge contain different versions of the English language component. Throughout this document the US English language component is referred to as English and the British English language component is referred to as British. You can install either the English language component or the British language component as part of the full ALL-IN-1 installation procedure or as an additional language, see the ALL-IN-1 Installation Guide Part 1 Base Installation. The market component is installed as part of the full ALL-IN-1 installation procedure. See the ALL-IN-1 Installation Guide Part 1 Base Installation. You need to refer to the information in this book, when performing an installation involving the English language component, the British language component, or either of the market components covered. 1-2 Introduction 2 ________________________________________________________________ US Installation 2.1 Installation from a CD Information for the ALL-IN-1 Version 3.0 English language component and the US market component is given in this chapter. Your CD contains both these components. 2.2 Installation from a Tape or Cartridge Your ALL-IN-1 Version 3.0 US tape or cartridge contains the English language component and the US market component of the ALL-IN-1 Version 3.0 kit. The ALL-IN-1 Version 3.0 US market tape or cartridge is labeled: ALL-IN-1 V3.0 US ENGLISH media_type LANGUAGE/MARKET COMPONENT A12030 (c) 1992 Digital Equimpment Corp. where media_type is 16MT9 for tape and TK50 for a TK50 cartridge. 2.3 English Language Component The ALL-IN-1 Version 3.0 English Language component contains the following savesets: A1LUS030.A A1LUS030.B A1LUS030.C A1LUS030.D A1LUS030.E A1LUS030.F A1LUS030.G A1LUS030.H A1LUS030.I A1LUS030.J A1LUS030.K US Installation 2-1 US Installation 2.3 English Language Component A1LUS030.L A1LUS030.M Your ALL-IN-1 Version 3.0 English language kit includes the VAX Language Lexicon/American. 2.3.1 Useful Information for the English Language Component Table 2-1 lists useful information for the English language component of ALL-IN-1 Version 3.0 and where the information is used. Table 2-1 Useful Information for the English Language __________Component_______________________________________ Information_________Value_________Use_____________________ Product name A1LUS030 Installation Language name ENGLISH File, directory and logical names, and for the /LANGUAGE qualifier Language code US During installation Language component 59 000 Installation kit size (blocks) __________________________________________________________ __________________________________________________________ 2.3.2 Disk Space Required on the Installation Working Disk During Installation Table 2-2 gives the disk space required on the working disk for installations in safety and non-safety mode. The installation requires space for a temporary working directory. Files are restored into this directory from the savesets. By default, this directory is created on the system disk, but the directory can be on another disk if required. Use the VMSINSTAL option AWD to use an alternative working disk. If there is sufficient space to perform all installation actions on the working disk, the installation will be performed in safety mode. If there is insufficient space for safety mode, but enough space to restore the largest saveset and perform installation actions, then the installation is performed in non-safety mode. The 2-2 US Installation US Installation 2.3 English Language Component installation cannot be performed if there is insufficient space on the working disk for non-safety mode. The checks for space on the working device are independent of the space required to provide files. You do not have to add file space required for ALL-IN-1 areas to the space required by the temporary working directory. Table 2-2 Disk Space Required on the Working Disk During __________Installation____________________________________ Non-safety Installation_Type__________Safety_Mode______Mode__________ English primary language 154 000 35 000 English secondary 66 000 25 000 language__________________________________________________ 2.3.3 Disk Space Required for the Language Files for a Fresh Installation If you are installing ALL-IN-1 Version 3.0 as a fresh ALL-IN-1 system, or you are adding English as an additional language, Table 2-3 shows the disk space required for the ALL-IN-1 language files. The disk space values are those used during installation. The disk space used by the installed files may be slightly less. If your installation is a fresh installation, add the values given in ALL-IN-1 Installation Guide Part 1 Base Installation to the values in Table 2-3. If you are adding English as an additional language you only need the space given in Table 2-3. US Installation 2-3 US Installation 2.3 English Language Component Table 2-3 Disk Space Required For the Language File Areas For a Fresh Installation or New Additional __________Language________________________________________ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ Language disk 49 000 47 000 EPS files on language 500 500 disk LCI$lexicon disk 1500 n/a System disk[1] 5000 5000 [1]Space_required_to_provide_ALL-IN-1_language_files_to___ system directories __________________________________________________________ If you are upgrading from ALL-IN-1 Version 2.3 or Version 2.4 primary or secondary language, Table 2-4 gives the extra disk space you require for the ALL-IN-1 language files. If your installation is a primary language upgrade add the values given in ALL-IN-1 Installation Guide Part 1 Base Installation to the values given in Table 2-4. If your installation is an upgrade of English as an additional language you need only the space given in Table 2-4. Table 2-4 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 Version 2.3 or __________Version_2.4_____________________________________ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ Language disk 26 000 24 000 EPS files on language 500 500 disk LCI$lexicon disk 1500 n/a (continued on next page) 2-4 US Installation US Installation 2.3 English Language Component Table 2-4 (Cont.) Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 __________________Version_2.3_or_Version_2.4______________ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ System disk[1] 5000 5000 [1]Space_required_to_provide_ALL-IN-1_language_files_to___ system directories __________________________________________________________ If you are upgrading from ALL-IN-1 STARTER Version 1.0 or Version 2.4, Table 2-5 gives the extra disk space you require. Table 2-5 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 STARTER Version __________1.0_or_Version_2.4______________________________ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ Language disk 33 000 31 000 EPS files on language 500 500 disk LCI$lexicon disk 1500 n/a System disk[1] 5000 5000 [1]Space_required_to_provide_ALL-IN-1_langauage_files_to__ system directories __________________________________________________________ The upgrade values are for an installation in which you choose to purge replaced files. If you choose not to purge replaced files, use the fresh installation disk space values given in Table 2-3. US Installation 2-5 US Installation 2.3 English Language Component 2.3.4 Optional Products You can integrate the following optional products with ALL-IN-1: o VAX Grammar Checker Version 1.0 o Language and Specialized Lexicons: - American Business Lexicon Version 2.0 - American Medical Lexicon Version 2.0 See the Language and Specialized Lexicons Installation Guide for instructions on installing the lexicons. 2.4 US Market Component The US market component contains the following savesets: o A1CUS030.A o A1CUS030.B o A1C030.A (this saveset is only used during the installation procedure) 2.4.1 Useful Information for the US Market Component Table 2-6 lists useful information for the US market component of ALL-IN-1 Version 3.0. 2-6 US Installation US Installation 2.4 US Market Component Table_2-6_Useful_Information_for_the_US_Market_Component__ Information______Value_________Use________________________ Product name A1CUS030 Installation and naming of savesets Market name US Media labeling Market code US During installation Market 2800 Installation component kit size (blocks) ALL-IN-1 date format: Alphanumeric DD-MMM-YYYY ALL-IN-1 Numeric MM/DD/YY ALL-IN-1 WPS-PLUS date dd-mmm-yyyy WPS-PLUS format WPS-PLUS time colon (:) WPS-PLUS separator Currency format: Currency $ WPS-PLUS symbol Decimal dot (.) WPS-PLUS separator Thousand comma (,) WPS-PLUS separator Page_size________66____________Printer_settings___________ 2.5 Keyboard Support Your kit contains a Keyboard Reference Card and a Keyboard Diagram for the American LK201 and VT100 keyboards. The following keyboard mapping tables are supplied with your ALL-IN-1 Version 3.0 kit: US Installation 2-7 US Installation 2.5 Keyboard Support FRENCH_A1_LK201-AA.A1KMT FRENCH_WPS_LK201-AA.A1KMT FRENCH_A1_LK201-AP.A1KMT FRENCH_WPS_LK201-AP.A1KMT FRENCH_A1_LK201-BA.A1KMT FRENCH_WPS_LK201-BA.A1KMT FRENCH_A1_LK201_BP.A1KMT FRENCH_WPS_LK201-BP.A1KMT FRENCH_A1_LK201-NA.A1KMT FRENCH_WPS_LK201-NA.A1KMT FRENCH_A1_LK250-AA.A1KMT FRENCH_WPS_LK250-AA.A1KMT FRENCH_A1_LK250-AP.A1KMT FRENCH_WPS_LK250-AP.A1KMT GERMAN_A1_LK201-AG.A1KMT GERMAN_WPS_LK201-AG.A1KMT GERMAN_A1_LK201-BA.A1KMT GERMAN_WPS_LK201-BG.A1KMT GERMAN_A1_LK201-BG.A1KMT GERMAN_WPS_LK201-BA.A1KMT GERMAN_A1_LK250-AG.A1KMT GERMAN_WPS_LK250-AG.A1KMT SPANISH_A1_LK201-AA.A1KMT SPANISH_WPS_LK201-AA.A1KMT SPANISH_A1_LK201-BA.A1KMT SPANISH_WPS_LK201-BA.A1KMT SPANISH_A1_LK201-BS.A1KMT SPANISH_WPS_LK201-BS.A1KMT SPANISH_A1_LK201-LS.A1KMT SPANISH_WPS_LK201-LS.A1KMT SPANISH_A1_LK250-AS.A1KMT SPANISH_WPS_LK250-AS.A1KMT These mapping tables are invoked by entering: $ ALLIN1/KEYBOARD=keyboard_mapping where keyboard_mapping is the identity of the required keyboard. A list of these keywords is held in OA$DATA_SHARE:OA$KEYBOARDS.DAT (see the ALL-IN-1 Management Guide). 2-8 US Installation US Installation 2.6 Modems Supported 2.6 Modems Supported The autodial feature of the modems listed in Table 2-7 is supported. You can disable this feature by customizing OAMARKET.BLI. ________________________Note ________________________ You must use the Customization Management subsystem to customize ALL-IN-1. _____________________________________________________ Table_2-7_Autodial_Modems_Supported_by_ALL-IN-1___________ Manufacturer____Model_Number______________________________ Digital DF02-AC Digital DF03-AC Digital DF100 series Case 440/12 Racal-Milgo MPS1222-AD Racal-Milgo_____MPS1222_with_Racal-Vadic_VA811____________ In addition, all Bell 212A/103 compatible modems, and modems meeting CCITT V21 and V22 recommendations, are supported as manual-dial modems. Refer to the manuals provided with the modems for information on installing and using modems. US Installation 2-9 3 ________________________________________________________________ GB Installation This chapter contains information about the ALL-IN-1 Verison 3.0 British language component, and the GB market component. 3.1 Installation from a CD The British language component is the English language component modified by the British dialect component. If you install the British language component all language- specific directory, file and logical names will be BRITISH. You can install the English language component with your GB market component if you want, but your system will not have British language specific features and all language-specific directory, file and logical names will be ENGLISH. Information about the English language component is in Chapter 2 Your CD contains the English language component and the British dialect component. When used together, these two components form the British language component. 3.2 Installation from a Tape or Cartridge Your ALL-IN-1 Version 3.0 GB tape or cartridge contains the British language component and the GB market component of the ALL-IN-1 Version 3.0 kit. The ALL-IN-1 Version 3.0 GB tape or cartridge is labeled: ALL-IN-1 V3.0 GB ENGLISH media_type LANGUAGE/MARKET COMPONENT A12030 (c) 1992 Digital Equimpment Corp. where media_type is 16MT9 for tape and TK50 for a TK50 cartridge. GB Installation 3-1 GB Installation 3.2 Installation from a Tape or Cartridge The British language component contained on the GB tape or cartridge is different from the English language component. It is designed to work only with the British dialect component which replaces some English language component files, and sets all language specific directory, file and logical names to BRITISH. Some of the English language component files are replaced by British dialect files so they are not populated. As a result, you cannot use the language component on the GB tape without the British dialect component. If you are installing the British language component you must give the British dialect code (US_GB) in response to the dialect question during the installation procedure. If you want to install the English language component with the British market component, you can do so by installing the language component from the US tape or cartridge. ________________________Note ________________________ You cannot upgrade from English to British or from British to English _____________________________________________________ 3.3 British Language Component The ALL-IN-1 Version 3.0 British Language component contains the following savesets: A1LUS030.A A1LUS030.B A1LUS030.C A1LUS030.D A1LUS030.E A1LUS030.F A1LUS030.G A1LUS030.H A1LUS030.I A1LUS030.J A1LUS030.K A1LUS030.L A1LUS030.M A1DUS_GB030.A 3-2 GB Installation GB Installation 3.3 British Language Component Your ALL-IN-1 Version 3.0 British language component includes the VAX Language Lexicon/British. 3.3.1 Useful Information for the British Language Component Table 3-1 lists useful information for the British language component of ALL-IN-1 Version 3.0 and where the information is used. Table 3-1 Useful Information for the British Language __________Component_______________________________________ Information_________Value_________Use_____________________ Product name A1LUS030 Installation Language name BRITISH File, directory and logical names, and for the /LANGUAGE qualifier Language code US During installation Language component 68 000 Installation kit size (blocks) Dialect code US_GB Installation of language's dialect __________________________________________________________ __________________________________________________________ 3.3.2 Disk Space Required on the Installation Working Disk During Installation The installation requires space for a temporary working directory. Files are restored into this directory from the savesets. By default, this directory is created on the system disk, but the directory can be on another disk if required. Use the VMSINSTAL option AWD to use an alternative working disk. If there is sufficient space to perform all installation actions on the working disk, the installation will be performed in safety mode. If there is insufficient space for safety mode, but enough space to restore the largest saveset and perform installation actions, then the installation is performed in non-safety mode. The installation cannot be performed if there is insufficient space on the working disk for non-safety mode. Table 3-2 GB Installation 3-3 GB Installation 3.3 British Language Component gives the disk space required on the working disk for installations in safety and non-safety mode. The space checks for free blocks on the working device are independent of the space required to provide files. You do not have to add file sapce required for ALL-IN-1 areas to the space required by the temporary working directory. 3-4 GB Installation GB Installation 3.3 British Language Component Table 3-2 Disk Space Required on the Working Disk During __________Installation____________________________________ Non-safety Installation_Type__________Safety_Mode______Mode__________ British primary language 154 000 35 000 British secondary 66 000 25 000 language__________________________________________________ 3.3.3 Disk Space Required for the Language Files for a Fresh Installation If you are installing ALL-IN-1 Version 3.0 as a fresh ALL-IN-1 system, or you are adding British as an additional language, Table 3-3 shows the disk space required for the ALL-IN-1 language files. The disk space values are those used during installation. The disk space used by the installed files may be slightly less. If your installation is a fresh installation, add the values given in the ALL-IN-1 Installation Guide Part 1 Base Installation to the values given in Table 3-3. If you are adding British as an additional language you only need the space given in Table 3-3. Table 3-3 Disk Space Required For the Language File Areas __________For_a_Fresh_Installation________________________ Disk Space Disk Space with without ALL-IN-1_area______________WPS-PLUS_________WPS-PLUS______ Language disk 49 000 47 000 EPS files on language 500 500 disk LCI$lexicon disk 1500 n/a System disk[1] 5000 5000 [1]Space_required_to_provide_ALL-IN-1_language_files_to___ system directories __________________________________________________________ If you are upgrading from ALL-IN-1 Version 2.3 or Version 2.4 primary or secondary language, Table 3-4 gives the GB Installation 3-5 GB Installation 3.3 British Language Component extra disk space you require for the ALL-IN-1 language files. If your installation is an upgrade of a complete system, add the values given in the ALL-IN-1 Installation Guide Part 1 Base Installation to the values given in Table 3-4. If your installation is an upgrade of British as an additional language you only need the space given in Table 3-4. Table 3-4 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 Version 2.3 or __________Version_2.4_____________________________________ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ Language disk 26 000 24 000 EPS files on language 500 500 disk LCI$lexicon disk 1500 n/a System disk[1] 5000 5000 [1]Space_required_to_provide_ALL-IN-1_language_files_to___ system directories __________________________________________________________ If you are upgrading from ALL-IN-1 STARTER Version 1.0 or Version 2.4, Table 3-5 gives the extra disk space you require. Table 3-5 Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 STARTER Version __________1.0_or_Version_2.4______________________________ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ Language disk 33 000 31 000 (continued on next page) 3-6 GB Installation GB Installation 3.3 British Language Component Table 3-5 (Cont.) Disk Space Required for the Language File Areas for an Upgrade from ALL-IN-1 __________________STARTER_Version_1.0_or_Version_2.4______ Without ALL-IN-1_Area______________With_WPS-PLUS____WPS-PLUS______ EPS files on language 500 500 disk LCI$lexicon disk 1500 n/a System disk[1] 5000 5000 [1]Space_required_to_provide_ALL-IN-1_langauage_files_to__ system directories __________________________________________________________ The upgrade values are for an installation in which you choose to purge replaced files. If you choose not to purge replaced files, use the fresh installation disk space values given in Table 3-3. 3.3.4 Optional Products You can integrate the following optional products with ALL-IN-1: o VAX Grammar Checker Version 1.0 3.4 GB Market Component The GB market component contains the following savesets: o A1CGB030.A o A1CGB030.B o A1C030.A (this saveset is used only during the installation procedure) GB Installation 3-7 GB Installation 3.5 Useful Information for the GB Market Component 3.5 Useful Information for the GB Market Component Table 3-6 lists useful information for the GB market component of ALL-IN-1 Version 3.0. Table_3-6_Useful_Information_for_the_GB_Market_Component__ Information______Value_________Use________________________ Product name A1CGB030 Installation and naming of savesets Market name GB Media labeling Market code GB During installation Market 4100 Installation component kit size (blocks) ALL-IN-1 date format: Alphanumeric DD-MMM-YYYY ALL-IN-1 Numeric MM/DD/YY[1] ALL-IN-1 WPS-PLUS date dd-mmm-yyyy WPS-PLUS format WPS-PLUS time colon (:) WPS-PLUS separator Currency format: Currency pound sign WPS-PLUS symbol Decimal dot (.) WPS-PLUS separator Thousand comma (,) WPS-PLUS separator Page size 66 Printer settings [1]A_langauge_default_of_DD/MM/YY_may_be_selected_during__ installation __________________________________________________________ 3-8 GB Installation GB Installation 3.6 Keyboard Support 3.6 Keyboard Support The ALL-IN-1 UK Addendum contains keyboard layouts for the LK201-AE and LK201-UC keyboards. The following keyboard mapping tables are supplied with your ALL-IN-1 Version 3.0 kit: BRITISH_A1_LK201-AA.A1KMT BRITISH_WPS_LK201-AA.A1KMT BRITISH_A1_LK201-AE.A1KMT BRITISH_WPS_LK201-AE.A1KMT BRITISH_A1_LK201-BA.A1KMT BRITISH_WPS_LK201-BA.A1KMT BRITISH_A1_LK201-BE.A1KMT BRITISH_WPS_LK201-BE.A1KMT BRITISH_A1_LK201-EE.A1KMT BRITISH_WPS_LK201-EE.A1KMT BRITISH_A1_LK201.A1KMT BRITISH_WPS_LK201.A1KMT FRENCH_A1_LK201-AA.A1KMT FRENCH_WPS_LK201-AA.A1KMT FRENCH_A1_LK201-AP.A1KMT FRENCH_WPS_LK201-AP.A1KMT FRENCH_A1_LK201-BA.A1KMT FRENCH_WPS_LK201-BA.A1KMT FRENCH_A1_LK201_BP.A1KMT FRENCH_WPS_LK201-BP.A1KMT FRENCH_A1_LK201-NA.A1KMT FRENCH_WPS_LK201-NA.A1KMT FRENCH_A1_LK250-AA.A1KMT FRENCH_WPS_LK250-AA.A1KMT FRENCH_A1_LK250-AP.A1KMT FRENCH_WPS_LK250-AP.A1KMT GERMAN_A1_LK201-AG.A1KMT GERMAN_WPS_LK201-AG.A1KMT GERMAN_A1_LK201-BA.A1KMT GERMAN_WPS_LK201-BG.A1KMT GERMAN_A1_LK201-BG.A1KMT GERMAN_WPS_LK201-BA.A1KMT GERMAN_A1_LK250-AG.A1KMT GERMAN_WPS_LK250-AG.A1KMT SPANISH_A1_LK201-AA.A1KMT SPANISH_WPS_LK201-AA.A1KMT SPANISH_A1_LK201-BA.A1KMT SPANISH_WPS_LK201-BA.A1KMT SPANISH_A1_LK201-BS.A1KMT SPANISH_WPS_LK201-BS.A1KMT SPANISH_A1_LK201-LS.A1KMT SPANISH_WPS_LK201-LS.A1KMT SPANISH_A1_LK250-AS.A1KMT SPANISH_WPS_LK250-AS.A1KMT These mapping tables are invoked by entering: $ ALLIN1/KEYBOARD=keyboard_mapping where keyboard_mapping is the identity of the required keyboard. A list of these keywords is held in OA$DATA_SHARE:OA$KEYBOARDS.DAT (see the ALL-IN-1 Management Guide). GB Installation 3-9 GB Installation 3.7 Modems Supported 3.7 Modems Supported The autodial feature of the modems listed in Table 3-7 is supported. You can disable this feature by customizing OAMARKET.BLI. ________________________Note ________________________ You must use the Customization Management subsystem to customize ALL-IN-1. _____________________________________________________ Table_3-7_Autodial_Modems_Supported_by_ALL-IN-1___________ Manufacturer____Model_Number______________________________ Case 440/12 Racal-Milgo MPS1222-AD Racal-Milgo_____VA811/VA831B______________________________ In addition, all Bell 212A/103 compatible modems, and modems meeting CCITT V21, V22 and V23bis recommendations, are supported as manual-dial modems. If you are using a modem which supports auto redialling, please note that in order to comply with UK PTT regula- tions, the auto redial feature is disabled in this release of ALL-IN-1. Refer to the UK Addendum for further details. Refer to the manuals provided with the modems for information on installing and using modems. 3-10 GB Installation