DIGITAL_NAS_Packages_for_OpenVMS_Alpha_Systems Installation Guide March 1998 This guide contains instructions for installing the DIGITAL NAS Packages for OpenVMS Alpha systems. Revision/Update Information: This guide supersedes the April 1997 version of the installation guide. Software Version: Version 8.1a Operating System Version: OpenVMS Alpha Version 7.1 Digital Equipment Corporation Maynard, Massachusetts __________________________________________________________ February 1998, Revised Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description. Possession, use, or copying of the software described in this publication is authorized only pursuant to a valid written license from Digital or an authorized sublicensor. No responsibility is assumed for the use or reliability of software on equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. © by Digital Equipment Corporation 1998. All rights reserved. The following are trademarks of Digital Equipment Corporation: ACMS, ALL-IN-1, Bookreader, CDA, DECforms, DECmessageQ, DECnet, DECnet-Plus, DECprint, DECwindows, DIGITAL, DIGITAL NAS, ObjectBroker, OpenVMS, PATHWORKS, POLYCENTER, PrintServer, VAX, VAX DOCUMENT, VMScluster, VMS, and the DIGITAL logo. The following are third-party trademarks: IEEE is a registered trademark and POSIX is a registered certification mark of the Institute of Electrical and Electronics Engineers. Internet is a registered trademark of Internet, Inc. Motif is a registered trademark of Open Software Foundation, Inc. OS/2 is a registered trademark of International Business Machines Corporation. Oracle Rdb and Oracle Trace are registered trademarks of Oracle Corporation. PostScript is a registered trademark of Adobe Systems Inc. All other trademarks and registered trademarks are the property of their respective holders. This document was prepared using VAX DOCUMENT Version 2.1. ________________________________________________________________ Contents Preface.................................................. ix 1 Overview 1.1 What DIGITAL NAS Is.......................... 1-1 1.2 DIGITAL NAS Packages......................... 1-2 1.2.1 What Has Changed in the DIGITAL NAS Packages................................. 1-3 1.2.2 Components of the DIGITAL NAS Packages... 1-3 1.3 How to locate the DIGITAL NAS Packages Products..................................... 1-9 1.3.1 Accessing Online Documentation........... 1-11 1.3.2 Accessing Component Installation Guides, Cover Letters, and SPDs.................. 1-12 2 DIGITAL NAS Packages Preparation and Installation 2.1 Installation Prerequisites for the DIGITAL NAS Packages................................. 2-1 2.1.1 Required Hardware........................ 2-2 2.1.2 Required Operating System Software....... 2-2 2.1.3 Required OpenVMS Tailoring Classes....... 2-3 2.1.4 Backing Up Your System Disk ............. 2-3 2.2 DIGITAL NAS Packages License Requirements.... 2-3 2.2.1 Installing a DIGITAL NAS Package: At a Glance .................................. 2-4 2.2.2 DIGITAL NAS Packages License Registration ......................................... 2-6 2.2.3 VMScluster License Requirements ......... 2-6 2.2.4 DIGITAL NAS Packages Licenses that Duplicate Existing Licenses.............. 2-7 iii 2.3 Using the POLYCENTER Software Installation (PCSI) Utility............................... 2-8 2.4 Installing the DIGITAL NAS Packages Base Kit.......................................... 2-9 2.5 Using the VMSINSTAL Utility.................. 2-10 2.6 Modifying System Parameters ................. 2-11 2.6.1 Checking System Parameter Values......... 2-12 2.6.2 Using MODPARAMS_NAS*.DAT to Update System Parameters............................... 2-12 2.6.3 Calculating the Values for GBLPAGES and GBLSECTIONS.............................. 2-13 2.6.4 Changing System Parameter Values with AUTOGEN ................................. 2-15 2.7 Identifying and Reporting DIGITAL NAS Packages Installation Problems .............. 2-17 3 Installing the DIGITAL NAS Packages Components 3.1 Using the DIGITAL NAS Reporter............... 3-1 3.2 Component Preinstallation Considerations .... 3-2 3.2.1 DECnet-Plus Considerations............... 3-3 3.2.2 DECnet-Plus Component Restrictions....... 3-3 3.2.3 Oracle Rdb[TM] and Oracle Trace[TM] Considerations........................... 3-4 3.2.4 DECwindows Motif for OpenVMS Alpha Considerations........................... 3-4 3.2.4.1 Character-Set Restrictions............. 3-4 3.3 Component Preinstallation Checklist.......... 3-5 3.4 Component Installation Order and Dependencies................................. 3-5 3.5 Component Installation....................... 3-9 3.6 Postinstallation Considerations ............. 3-10 4 Upgrading DIGITAL NAS Packages Versions or Levels 4.1 Installing a Higher Version of DIGITAL NAS Packages Software ........................... 4-1 4.2 Installing a Higher-Level of DIGITAL NAS Packages Software ........................... 4-2 4.3 Installing a Lower-Level DIGITAL NAS Packages License ..................................... 4-3 4.4 Installing DIGITAL NAS on an earlier version of OpenVMS .................................. 4-3 iv A Component Installation Prerequisites A.1 Prerequisites Common to All Packages......... A-1 A.1.1 Privileges .............................. A-1 A.1.2 Required Disk Space and Installation Times.................................... A-1 A.1.3 System Parameter Requirements............ A-2 A.1.4 DECnet Executor Parameters............... A-3 A.1.5 Identifying and Reporting Component Installation Problems ................... A-3 A.2 Package-Specific Prerequisites............... A-4 A.2.1 DIGITAL NAS Client 150 Prerequisites..... A-4 A.2.2 DIGITAL NAS Base Server 200 Prerequisites............................ A-7 A.2.3 DIGITAL NAS Client 250 Prerequisites..... A-11 A.2.4 DIGITAL NAS Server 300 Prerequisites..... A-15 A.2.5 DIGITAL NAS Production Server 400 Prerequisites............................ A-19 B Sample DIGITAL NAS Packages Installation B.1 Sample DIGITAL NAS Packages Base Kit Installation................................. B-1 C DIGITAL NAS Reporter Output D System Management Documentation Index Figures 2-1 DIGITAL NAS Installation Checklist for OpenVMS Alpha Systems.................... 2-4 v Tables 1-1 DIGITAL NAS Client 150................... 1-4 1-2 DIGITAL NAS Base Server 200 ............. 1-4 1-3 DIGITAL NAS Client 250................... 1-5 1-4 DIGITAL NAS Server 300................... 1-6 1-5 DIGITAL NAS Production Server 400........ 1-7 1-6 DECwindows Motif Language Variants ...... 1-9 1-7 DIGITAL NAS Packages Directories......... 1-10 1-8 DIGITAL NAS Packages-Specific Documentation............................ 1-11 1-9 Component Documentation Provided with DIGITAL NAS Packages .................... 1-12 1-10 DIGITAL NAS Packages Component System-Integrated Product SPD File Names ......................................... 1-12 2-1 DIGITAL NAS Packages Hardware Requirements............................. 2-2 2-2 MODPARAM Files Installed by DIGITAL NAS Packages ................................ 2-13 3-1 DECwindows Motif Language Variant Character Sets........................... 3-5 3-2 DIGITAL NAS Packages Installation Order and Dependencies......................... 3-6 A-1 DECnet Executor Parameters .............. A-3 A-2 DIGITAL NAS Client 150 Disk Space and Installation Time Requirements........... A-4 A-3 DIGITAL NAS Client 150 System Parameter Requirements ............................ A-6 A-4 DIGITAL NAS Base Server 200 Disk Space and Installation Time Requirements....... A-7 A-5 DIGITAL NAS Base Server 200 System Parameter Requirements .................. A-10 A-6 DIGITAL NAS Client 250 Disk Space and Installation Time Requirements........... A-11 A-7 DIGITAL NAS Client 250 System Parameter Requirements ............................ A-13 A-8 DIGITAL NAS Server 300 Disk Space and Installation Time Requirements........... A-15 vi A-9 DIGITAL NAS Server 300 System Parameter Requirements ............................ A-18 A-10 DIGITAL NAS Production Server 400 Disk Space and Installation Time Requirements............................. A-20 A-11 DIGITAL NAS Production Server 400 System Parameter Requirements .................. A-22 D-1 System Management Documentation-DIGITAL NAS Services............................. D-1 D-2 System Management Documentation-System Interfaces .............................. D-3 vii ________________________________________________________________ Preface This guide describes how to install each of the DIGITAL NAS[TM] Packages Version 8.1a for OpenVMS[TM] Alpha Systems listed below running OpenVMS Alpha Version 7.1 or higher. o DIGITAL NAS Client 150 o DIGITAL NAS Base Server 200 o DIGITAL NAS Client 250 o DIGITAL NAS Server 300 o DIGITAL NAS Production Server 400 Intended Audience This product is customer-installable by users already familiar with the VMSINSTAL procedure and POLYCENTER[TM] Software Installation Utility (PCSI). Digital Equipment Corporation offers comprehensive services, including on-site software installation, for customers who need additional services. DIGITAL recommends that you get installation services if you are unfamiliar with the VMSINSTAL procedure or PCSI Utility. Structure of this Guide This guide is organized as follows: o Chapter 1 describes the DIGITAL NAS packages and tells you how to access and print the documentation. ix o Chapter 2 describes the operating system and hardware required for installing the DIGITAL NAS packages, license procedures, and the installation of the DIGITAL NAS base kit and modifying system parameters for the DIGITAL NAS components. o Chapter 3 describes installing the DIGITAL NAS pack- ages' components, including pre- and postinstallation procedures. o Chapter 4 describes the procedures for installing higher DIGITAL NAS packages versions or levels and installing a lower-level DIGITAL NAS packages license. o Appendix A describes the prerequisites, including disk space, installation time, and system parameters for the DIGITAL NAS packages' components. o Appendix B contains a sample log of a DIGITAL NAS packages' base kit installation on OpenVMS Alpha Version 7.1. o Appendix C is a sample report generated by the DIGITAL NAS Reporter, showing the DIGITAL NAS packages' components and licenses currently installed on a sample system. o Appendix D lists the system management books that appear on the component bookshelves provided by the DIGITAL NAS packages. Related Manuals DIGITAL recommends that you print and read the component installation guides before installing the DIGITAL NAS packages. You may print this electronic documentation as reasonably necessary to exercise your license to use the DIGITAL NAS packages. See Section 1.3.2 for the location of the component installation guides. The following manuals from the OpenVMS documentation set provide additional information about installing DIGITAL NAS packages: o OpenVMS License Management Utility Manual o OpenVMS System Manager's Manual: Essentials x o OpenVMS System Management Utilities Reference Manual: A-L o A Comparison of System Management on OpenVMS Alpha and OpenVMS VAX[TM] o POLYCENTER Software Installation Utility User's Guide Conventions The following conventions are used in this guide: DIGITAL NAS Means DIGITAL Network Application Support. UPPERCASE TEXT Uppercase letters indicate the name of a command, a file, a parameter, a procedure, or utility. monospace font This typeface indicates a command, option, or path name, and is also used in examples of program code. bold Bold indicates user input in code examples. $ The dollar sign is used to indicate the DCL prompt. This prompt may be different on your system. 50 000 000 Spaces are used to punctuate whole decimal numbers containing five or more digits. Vertical ellipsis in an example . means that information not directly . related to the example has been . omitted. italics Italics with initial capitals indicates the title of a book. For example, the The Middleware Source Book. Italics for a lowercase text string indicates emphasis of a term. For example, the first entry. xi Italics in a code example indicates a variable string. For example, OpenVMS Version n.n These variables include DIGITAL NAS packages levels, version numbers, hardware devices, and directory locations. xii 1 ________________________________________________________________ Overview This chapter contains the following information: o A description of DIGITAL NAS (Section 1.1) o A brief overview of the DIGITAL NAS Packages (Section 1.2) o The components of the DIGITAL NAS Packages (Section 1.2.1 and Section 1.2.2) 1.1 What DIGITAL NAS Is DIGITAL NAS (Network Application Support) is a set of standards-compliant software that resides above the base platform (hardware and operating system), providing client/server enabling software. The term middleware is used to describe this level of software. See The Middleware Source Book (Order Number EY-S5454E-DP) for a description of the standards supported by the DIGITAL NAS packages. DIGITAL NAS software provides a consistent set of interfaces to support applications running on different platforms. It is the DIGITAL approach to enterprise-wide information systems. The DIGITAL NAS architecture defines a comprehensive set of services that enables applications to work easily across diverse hardware and software platforms and networks. The DIGITAL NAS architecture groups these services into six categories: o Presentation services o Printing services o Communication services o Control services Overview 1-1 o Computation services o Management services The components of the DIGITAL NAS packages represent the implementation of the services defined by the DIGITAL NAS architecture. For example, DECwindows Motif implements the X-Windows Motif and PEX standards. This guide provides an overview of considerations for installing the components and installing and using the DIGITAL NAS packages licenses and tools. 1.2 DIGITAL NAS Packages The DIGITAL NAS packages make it easy to use the DIGITAL NAS services. They include an integrated set of the most commonly used services, along with the underlying network transports. They merge a set of components that enables the creation of run-time clients and servers. The DIGITAL NAS Client 150 provides base client software services: network transports, graphical user inter- face (GUI), and clustering. These services allow the integration of data and applications in a distributed, multiplatform client/server environment. The DIGITAL NAS Base Server 200 provides the choice of common network transports and base services, such as print and file sharing, and presentation services required for distributed client/server environments. The DIGITAL NAS Client 250 builds on the DIGITAL NAS Client 150 and provides the client and peer-to-peer software to allow PCs and workstations to integrate with users, data, and other applications in a distributed, multiplatform client/server environment. The DIGITAL NAS Server 300 includes the DIGITAL NAS Base Server 200 and extends it with a set of commonly used industry-standard application programming interfaces (APIs) and services that enable applications to integrate with users, data, and other applications in a distributed, multiplatform client/server environment. 1-2 Overview Building upon the DIGITAL NAS Server 300, the DIGITAL NAS Production Server 400 enhances the reliability and availability of applications, data, and systems for business-critical environments such as transaction processing. This guide provides information about DIGITAL NAS Packages Version 8.1a for OpenVMS Alpha Systems only. 1.2.1 What Has Changed in the DIGITAL NAS Packages The DIGITAL NAS Packages, as of Version 8.1a have moved to a license only delivery. Separate DIGITAL NAS media has been discontinued. The DIGITAL NAS components can be found separately on the operating system or Software Product Library. 1.2.2 Components of the DIGITAL NAS Packages The tables in this section list the components in the various DIGITAL NAS packages. The DIGITAL NAS packages do not provide a license for all components (for example, PATHWORKS Server software). Consult the Software Product Description (SPD) for your DIGITAL NAS package for licensing information about a specific component. The version of each DIGITAL NAS component licensed, is as stated within the Software Products Library of the calendar quarter in which the DIGITAL NAS PAK is dated. Update licenses may be purchased for use of later versions of any component. The notes in the tables indicate that some of the components listed are system-integrated products (SIPs), installed as part of the operating system. Your DIGITAL NAS package provides licenses to run these products. Bookreader documentation for these SIPs is provided on the OpenVMS Alpha operating system documentation CD- ROM. Bookreader documentation for the other DIGITAL NAS packages components is provided on the OpenVMS Alpha documentation CD-ROM. Overview 1-3 Table 1-1 lists the components of the DIGITAL NAS Client 150. For further information on these components, see the DIGITAL NAS Client 150 SPD and the component product SPDs. Table_1-1_DIGITAL_NAS_Client_150__________________________ Component_Name__________________Notes_____________________ DECnet-Plus for OpenVMS Alpha End System DECnet for OpenVMS Alpha End This is a system- System integrated product (SIP). DIGITAL TCP/IP Client for OpenVMS Alpha DECwindows Motif for OpenVMS Alpha DECwindows Motif Language For a list of language Variants variants see Table 1-6. OpenVMS Cluster Client This is a system- Software_for_Alpha______________integrated_product_(SIP)._ Table 1-2 lists the components of the DIGITAL NAS Base Server 200. For further information on these components, see the DIGITAL NAS Base Server 200 Software Product Description (SPD) and the component product SPDs. Table_1-2_DIGITAL_NAS_Base_Server_200_____________________ Component_Name__________________Notes_____________________ DECnet for OpenVMS Alpha End This is a system- System integrated product (SIP). DECnet-Plus for OpenVMS Alpha End System (continued on next page) 1-4 Overview Table_1-2_(Cont.)_DIGITAL_NAS_Base_Server_200_____________ Component_Name__________________Notes_____________________ DECprint Supervisor (DCPS) for OpenVMS Alpha, Base Open Plus DIGITAL TCP/IP Services for OpenVMS Alpha DECwindows Motif for OpenVMS Alpha DECwindows Motif Language For a list of language Variants variants see Table 1-6. DIGITAL PATHWORKS for OpenVMS PrintServer Software for OpenVMS_Alpha_____________________________________________ Table 1-3 lists the components of the DIGITAL NAS Client 250. For further information on these components, see the DIGITAL NAS Client 250 SPD and the component product SPDs. Table_1-3_DIGITAL_NAS_Client_250__________________________ Component_Name__________________Notes_____________________ DEC Distributed Queuing Service for OpenVMS DECforms for OpenVMS Alpha Run-Time Only System DECnet for OpenVMS Alpha End This is a system- System integrated product (SIP). DECnet-Plus for OpenVMS Alpha End System (continued on next page) Overview 1-5 Table_1-3_(Cont.)_DIGITAL_NAS_Client_250__________________ Component_Name__________________Notes_____________________ DECprint Supervisor (DCPS) for OpenVMS Alpha, Base Plus DIGITAL TCP/IP Client for OpenVMS Alpha DECwindows Motif for OpenVMS Alpha DECwindows Motif Language For a list of language Variants variants see Table 1-6. Reliable Transaction Router for OpenVMS Alpha (Client) VMScluster Software for This is a system- OpenVMS_Alpha___________________integrated_product_(SIP)._ Table 1-4 lists the components of the DIGITAL NAS Server 300. For further information on these components, see the DIGITAL NAS Server 300 Software Product Description (SPD) and the component product SPDs. Table_1-4_DIGITAL_NAS_Server_300__________________________ Component_Name__________________Notes_____________________ DEC Distributed Queuing Service for OpenVMS DECforms for OpenVMS Alpha Run-Time Only System DECnet for OpenVMS Alpha This is a system- Extended Function integrated product (SIP). DECnet-Plus for OpenVMS Alpha Extended Function (continued on next page) 1-6 Overview Table_1-4_(Cont.)_DIGITAL_NAS_Server_300__________________ Component_Name__________________Notes_____________________ DECprint Supervisor (DCPS) for OpenVMS Alpha, Base Open Plus DIGITAL TCP/IP Services for OpenVMS Alpha DECwindows Motif for OpenVMS Alpha DECwindows Motif Language For a list of language Variants variants see Table 1-6. DIGITAL PATHWORKS for OpenVMS POSIX for OpenVMS PrintServer Software for OpenVMS Alpha Reliable Transaction Router for OpenVMS Alpha (Client) VMScluster Software for This is a system- OpenVMS_Alpha___________________integrated_product_(SIP)._ Table 1-5 lists the components of the DIGITAL NAS Production Server 400. For further information on these components, see the DIGITAL NAS Production Server 400 Software Product Description (SPD) and the component product SPDs. Table_1-5_DIGITAL_NAS_Production_Server_400_______________ Component_Name__________________Notes_____________________ ACMS for OpenVMS Run-Time System DEC Distributed Queuing Service for OpenVMS (continued on next page) Overview 1-7 Table_1-5_(Cont.)_DIGITAL_NAS_Production_Server_400_______ Component_Name__________________Notes_____________________ DECforms for OpenVMS Alpha Run-Time Only System DECnet for OpenVMS Alpha This is a system- Extended Function integrated product (SIP). DECnet-Plus for OpenVMS Alpha Extended Function DECprint Supervisor (DCPS) for OpenVMS Alpha, Base Open Plus DIGITAL TCP/IP Services for OpenVMS Alpha DECwindows Motif for OpenVMS Alpha DECwindows Motif Language For a list of language Variants variants see Table 1-6. DIGITAL PATHWORKS for OpenVMS POSIX for OpenVMS PrintServer Software for OpenVMS Alpha Reliable Transaction Router for OpenVMS Alpha Client Full Function RMS Journaling for OpenVMS This is a system- Alpha integrated product (SIP). VMScluster Software for This is a system- OpenVMS Alpha integrated product (SIP). Volume Shadowing for OpenVMS This is a system- Alpha___________________________integrated_product_(SIP)._ Table 1-6 lists the language variants provided with DECwindows Motif. DIGITAL NAS packages provides licenses 1-8 Overview for these products, but were unable to test the component software in the DIGITAL NAS system environment. Table_1-6_DECwindows_Motif_Language_Variants______________ Language_Variant_Name________________Version_Number_______ DECwindows Motif OpenVMS UI/Cesky 1.2-3 (or higher version) DECwindows Motif OpenVMS UI/Deutsch 1.2-3 (or higher version) DECwindows Motif OpenVMS UI/Español 1.2-3 (or higher version) DECwindows Motif OpenVMS UI 1.2-3 (or higher /Français version) DECwindows Motif OpenVMS UI 1.2-3 (or higher /Italiano version) DECwindows Motif OpenVMS UI/Magyar 1.2-3 (or higher version) DECwindows Motif OpenVMS UI/Polski 1.2-3 (or higher version) DECwindows Motif OpenVMS UI/Russkij 1.2-3 (or higher version) DECwindows Motif OpenVMS UI 1.2-3 (or higher /Slovensky version) DECwindows Motif OpenVMS UI/Svenska 1.2-3 (or higher _____________________________________version)_____________ 1.3 How to locate the DIGITAL NAS Packages Products For information on where to locate the DIGITAL NAS packages components contained on the CD-ROM set, refer to the Master Index, or in the [README] directory contained on disc 1 of the Software Product Library. You can also find the DIGITAL NAS packages documentation on the Online Documentation Library CD-ROMs. Overview 1-9 Table 1-7 lists the directory names and the corresponding DIGITAL NAS packages: Table_1-7_DIGITAL_NAS_Packages_Directories________________ Directory___________DIGITAL_NAS_Package___________________ [NAS_CLIENT_150] DIGITAL NAS Client 150 [NAS_BASE_SERVER] DIGITAL NAS Base Server 200 [NAS_CLIENT] DIGITAL NAS Client 250 [NAS_SERVER] DIGITAL NAS Base Server 300 [NAS_PROD_SERVER]___DIGITAL_NAS_Production_Server_400_____ Each directory is divided into: o A .KIT subdirectory containing binaries (save sets and PCSI files) for the specific DIGITAL NAS package. o A .DOCUMENTATION subdirectory containing documentation in ASCII (.TXT) and PostScript[TM] (.PS) formats for the specific DIGITAL NAS package. For example, the DIGITAL NAS Client 250 directory is structured as follows: [NAS_CLIENT] [NAS_CLIENT.KIT] DIGITAL NAS Client 250 and [NAS_CLIENT.DOCUMENTATION]component binaries DIGITAL NAS Client 250 and component documentation Before installing any of the DIGITAL NAS packages components, you should read the component installation guides supplied with your kit. These installation guides provide the necessary information to make the installation of each component go smoothly. See Section 1.3.2 for information about accessing the component installation guides. 1-10 Overview 1.3.1 Accessing Online Documentation Refer to the OpenVMS Alpha Online Documentation Library (ODL) for information about the online documentation. To read the online documentation provided with the DIGITAL NAS packages components, you need to install Digital's Bookreader[TM] Navigation Utility (BNU). ________________________Note ________________________ Online documentation is provided as is and is not covered by other DIGITAL warranties. _____________________________________________________ Table 1-8 lists the DIGITAL NAS packages-specific printable documentation provided within the .DOCUMENTATION directories for the DIGITAL NAS packages. These documents are provided in (PostScript) .PS and (ASCII) .TXT formats. Table_1-8_DIGITAL_NAS_Packages-Specific_Documentation_____ File_Name_______________Type_of_Document__________________ NAS-dir-name_SPD.TXT DIGITAL NAS packages SPDs (.PS) NAS-dir-name_ DIGITAL NAS Packages for OpenVMS IGUIDE.TXT (.PS) Alpha Systems Installation Guide (this guide) NAS-dir-name_COVER.TXT DIGITAL NAS packages cover letters (.PS) __________________________________________________________ In these file names, NAS-dir-name is one of the following: NAS_CLIENT_150 NAS_BASE_SERVER NAS_CLIENT NAS_SERVER NAS_PROD_SERVER __________________________________________________________ Overview 1-11 Digital strongly recommends that you read the DIGITAL NAS packages cover letter before proceeding with the installation. 1.3.2 Accessing Component Installation Guides, Cover Letters, and SPDs Installation guides, cover letters, and SPDs for the DIGITAL NAS packages components are contained on the OpenVMS Alpha Online Documentation Library (ODL). Table 1-9 describes the naming conventions for these documents. Table 1-9 Component Documentation Provided with DIGITAL __________NAS_Packages____________________________________ File Name or Suffix________Type_of_Document____________________________ xxx[1]_SPD Component Software Product Descriptions (SPDs) xxx_IGUIDE Component installation guides xxx_COVER Component cover letter [1]Where_xxx_is_the_component_identifier_as_shown_in______ Table 1-10. __________________________________________________________ Table 1-10 lists the file names of the ASCII versions of the SPDs for these system-integrated products. Table 1-10 DIGITAL NAS Packages Component System- ___________Integrated_Product_SPD_File_Names______________ DIGITAL NAS Packages Component SIP________________________________File_Name______________ DECnet for OpenVMS Alpha DECNET_AXP071_SPD.TXT RMS Journaling for OpenVMS Alpha RMS_SPD.TXT (continued on next page) 1-12 Overview Table 1-10 (Cont.) DIGITAL NAS Packages Component System- ___________________Integrated_Product_SPD_File_Names______ DIGITAL NAS Packages Component SIP________________________________File_Name______________ VMScluster Software for OpenVMS VMSCLUSTER_SPD.TXT Alpha OpenVMS Cluster Client Software VMSCLUSTER_SPD.TXT for Alpha Volume Shadowing for OpenVMS SHADOWING_SPD.TXT Alpha_____________________________________________________ Overview 1-13 2 ________________________________________________________________ DIGITAL NAS Packages Preparation and Installation This chapter discusses the preparation for and instal- lation of the DIGITAL NAS packages licenses, and the DIGITAL NAS packages base kit. Appendix A describes the prerequisites for installing the DIGITAL NAS packages components. Section 3.5 describes the installation of the DIGITAL NAS packages components. This chapter describes: o Installation prerequisites for the DIGITAL NAS packages (Section 2.1) o Licensing requirements for DIGITAL NAS packages (Section 2.2) o Using the POLYCENTER Software Installation (PCSI) Utility (Section 2.3) o Installing the DIGITAL NAS packages base kit (Section 2.4) o Using the VMSINSTAL utility (Section 2.5) o Modifying the system parameters for DIGITAL NAS packages components (Section 2.6) o Identifying and reporting errors (Section 2.7) 2.1 Installation Prerequisites for the DIGITAL NAS Packages This section describes the hardware and software prerequisites, required tailoring classes for installing the DIGITAL NAS packages, and system backup suggestions. DIGITAL NAS Packages Preparation and Installation 2-1 2.1.1 Required Hardware The DIGITAL NAS packages support all the valid Alpha CPU configurations. For a list of the processors supported by individual components, see the individual component SPDs. Table 2-1 shows the memory and the disk space required to install each DIGITAL NAS package. To run the components, you may need additional disk space. Table_2-1_DIGITAL_NAS_Packages_Hardware_Requirements______ Disk Space Disk Space During After Installation Installation DIGITAL NAS In Blocks In Blocks Package[1]_________/__In_MB_________/__In_MB_________Memory DIGITAL NAS 744 200 364 728 000 356 32 MB Client 150 DIGITAL NAS Base 852 000 416 831 500 406 32 MB Server 200 DIGITAL NAS 800 000 391 760 800 372 32 MB Client 250 DIGITAL NAS 921 000 450 874 800 427 32 MB Server 300 DIGITAL NAS 921 000 450 874 800 427 32 MB Production Server 400 [1]See_the_individual_DIGITAL_NAS_packages_SPDs_for_______ further information. __________________________________________________________ 2.1.2 Required Operating System Software The DIGITAL NAS Packages require the latest version of the OpenVMS Alpha operating system. You must have a current and valid OpenVMS Alpha operating system license already loaded. 2-2 DIGITAL NAS Packages Preparation and Installation 2.1.3 Required OpenVMS Tailoring Classes The OpenVMS operating system comes with a variety of support options, or classes. The DIGITAL NAS packages components require the following OpenVMS tailoring classes: o Network Support o Programming Support o System Programming Support o Secure User's Environment o Utilities o OpenVMS Workstation Support o Miscellaneous Files o Translated Image Files 2.1.4 Backing Up Your System Disk At the beginning of an installation, VMSINSTAL asks if you have backed up your system disk; POLYCENTER Software Installation (PCSI) does not ask. DIGITAL recommends that you perform a standalone backup of your system disk before installing any software. Use the backup procedures that have been established at your site. For details on backing up your disk, see the OpenVMS System Managers Manual: Essentials and the OpenVMS System Management Utilities Reference Manual: A-L in the OpenVMS Alpha operating system documentation. 2.2 DIGITAL NAS Packages License Requirements ________________________Note ________________________ DIGITAL NAS packages Version 8.1a software is furnished under the licensing provisions of Digital Equipment Corporation's Standard Terms and Conditions. For more information about DIGITAL licensing terms and policies, contact your local DIGITAL office, or visit the Software Licensing InfoCenter on the World Wide Web at: http://www.digital.com/info/software-licensing/ _____________________________________________________ DIGITAL NAS Packages Preparation and Installation 2-3 You can install DIGITAL NAS Packages only on OpenVMS Alpha Version 7.1 or higher. If you are running an earlier version of the OpenVMS operating system, you must upgrade to OpenVMS Alpha Version 7.1 or higher version before proceeding. You must register the software license with the OpenVMS License Management Facility (LMF) before you install the DIGITAL NAS components. Registering the DIGITAL NAS packages license registers all the components for that package. The Product Authorization Key (PAK) that is shipped with the DIGITAL NAS packages contains the license registration information you need. The PAK is a paper certificate that contains information about the license you have purchased to run all component software. This section deals with license registration, which is a preinstallation procedure. See Section 2.4 for instructions on installing the DIGITAL NAS packages base kit. 2.2.1 Installing a DIGITAL NAS Package: At a Glance The checklist in Figure 2-1 summarizes the major steps necessary to successfully install a DIGITAL NAS package on OpenVMS Alpha. Figure 2-1 DIGITAL NAS Installation Checklist for OpenVMS Alpha Systems A checklist summarizing the major steps necessary to successfully install a DIGITAL NAS package on OpenVMS Alpha: TASK Task Checkoff ___________________________ | Decide which Components | | are needed | |___________________________| __X*__ | ___________________________ | Determine the appropriate | | DIGITAL NAS package | |___________________________| __X*__ | ___________________________ | Register and load the | | DIGITAL NAS License | | for the package | |___________________________| __X*__ | ___________________________ | Install the DIGITAL NAS | | Version 8.1a Base Kit | |___________________________| _______ | ___________________________ | Adjust System Parameters | |___________________________| _______ | ___________________________ | ** MANDATORY ** | | ** REBOOT ** | | All systems | |___________________________| _______ | ___________________________ | Run the DIGITAL NAS | | Reporter | |___________________________| _______ | ___________________________ | Read all Component | | Installation Guides | |___________________________| _______ | ___________________________ | Install all Necessary | | components per component | | Installation Guide | |___________________________| _______ * = In most cases you will have already done this, and these steps will not be necessary. 2-4 DIGITAL NAS Packages Preparation and Installation ________________________Note ________________________ You must install the DIGITAL NAS packages base kit NASAXP. If you are updating the system parameters, you must reboot your system before installing the individual DIGITAL NAS packages components, or the components installations may fail. _____________________________________________________ DIGITAL NAS Packages Preparation and Installation 2-5 2.2.2 DIGITAL NAS Packages License Registration Register only the highest DIGITAL NAS packages license. For example: o If you are upgrading to the DIGITAL NAS Server 300 or DIGITAL NAS Production Server 400 from the DIGITAL NAS Base Server 200 o If you are upgrading to the DIGITAL NAS Client 250 from the DIGITAL NAS Client 150 Disable and unload the lower-level license by using the LICENSE DISABLE and the LICENSE UNLOAD commands. These commands are described in the OpenVMS License Management Utility Manual. In general, higher-level DIGITAL NAS packages include the right to use all components of a lower-level DIGITAL NAS package. The exception is the DIGITAL NAS Base Server 200, which does not include the right to use all DIGITAL NAS Client 150 components. To register a license, log in to the SYSTEM account and run the SYS$UPDATE:VMSLICENSE.COM procedure. When the procedure prompts you for information, enter data from your PAK. The product name is one of the following, depending on which license you purchased: NET-APP-SUP-150 for the DIGITAL NAS Client 150 NET-APP-SUP-200 for the DIGITAL NAS Base Server 200 NET-APP-SUP-250 for the DIGITAL NAS Client 250 NET-APP-SUP-300 for the DIGITAL NAS Server 300 NET-APP-SUP-400 for the DIGITAL NAS Production Server 400 2.2.3 VMScluster License Requirements If you are installing the DIGITAL NAS packages on a VMScluster, you must: 1. Purchase a separate DIGITAL NAS packages license for each node in your VMScluster that will use the DIGITAL NAS packages. 2-6 DIGITAL NAS Packages Preparation and Installation 2. Register a license for each node in the VMScluster that will use the DIGITAL NAS packages, using the command procedure SYS$UPDATE:VMSLICENSE.COM. 3. Modify the license to limit its use to the intended node with a command in the following format: LICENSE MODIFY /INCLUDE=nodename/AUTH=authorization_# NET-APP-SUP-nnn) In this format: o nodename is the name of the node on which VMScluster can be used. o authorization_# is your license authorization number. o nnn indicates the DIGITAL NAS package you are registering. The following example modifies the license for the DIGITAL NAS Server 300 on node MYNODE in a VMScluster: $ LICENSE MODIFY /INCLUDE=MYNODE/AUTH=AL9-WM-99999-999 NET-APP-SUP-300 4. Enter the LICENSE LOAD command from the node you indicate in step 3, or use the OpenVMS SYSMAN Utility. For complete information on using LMF, see the OpenVMS License Management Utility Manual on the OpenVMS Alpha operating system documentation CD-ROM. 2.2.4 DIGITAL NAS Packages Licenses that Duplicate Existing Licenses If your system contains a license for a DIGITAL NAS packages component that is separate from the DIGITAL NAS packages license, then a licensing problem may exist. To avoid the problem, you should modify single component license(s) to exclude the node(s) licensed to the DIGITAL NAS PAK. Modify the DIGITAL NAS packages license to include only the node that it licenses. DIGITAL NAS Packages Preparation and Installation 2-7 For example, use a procedure in the following format to prevent a new node from using the current DECwindows Motif (DW-MOTIF) license on the cluster and use the DIGITAL NAS Server 300 license instead: $ LICENSE MODIFY DW-MOTIF/EXCLUDE=NAS-node-name $ LICENSE MODIFY NET-APP-SUP-300/INCLUDE=NAS-node-name /AUTH=authorization# For more information on modifying existing licenses, see Section 2.2.3 and the OpenVMS License Management Utility Manual. 2.3 Using the POLYCENTER Software Installation (PCSI) Utility DIGITAL NAS Packages Version 8.1a provide the DIGITAL NAS packages base kit and some of the DIGITAL NAS components in POLYCENTER Software Installation (PCSI) format. PCSI distributions have several advantages over traditional VMSINSTAL kits. Some of the major advantages are improved installation speed and the ability to track and deinstall products at a later date. PCSI has both DCL and DECwindows Motif interfaces. For more information on either interface, see the POLYCENTER Software Installation Utility User's Guide. To install the DIGITAL NAS packages base kit, use PCSI as described in Section 2.4. ________________________Note ________________________ You must read the component installation guides before performing an installation using PCSI. Each component's installation guide provides the specific installation commands for that component, which may be different from the installation commands used to install DIGITAL NAS packages. _____________________________________________________ 2-8 DIGITAL NAS Packages Preparation and Installation 2.4 Installing the DIGITAL NAS Packages Base Kit Before you install any DIGITAL NAS packages component, install the DIGITAL NAS packages base kit, NASAXP, that includes: o DIGITAL NAS Reporter, described in Section 3.1 o MODPARAMS_NAS*.DAT, described in Section 2.6.2 o DIGITAL NAS packages release notes The DIGITAL NAS packages base kit is installed using the PCSI Utility. Installing the DIGITAL NAS packages base kit takes 1 to 5 minutes, depending on your system configuration. To install the DIGITAL NAS packages' base kit: 1. Define the PCSI$SOURCE logical name to point to the appropriate DIGITAL NAS packages kit area, using a command in the following format: DEFINE PCSI$SOURCE device-name:[nas-directory.KIT)] In this format, device-name is the device on which you have mounted the OpenVMS Alpha Software Product Library CD-ROM, and nas-directory is the directory name of the DIGITAL NAS package you are installing. For example, to point to the DIGITAL NAS Client 250 on DKA400, you would enter the following command: $ DEFINE PCSI$SOURCE DKA400:[NAS_CLIENT.KIT] The version of NASAXP/VERSION=8.1a is the same in all DIGITAL NAS packages directories. 2. Install the DIGITAL NAS packages base kit by entering the following command: $ PRODUCT INSTALL NASAXP /HELP Using the /HELP qualifier displays full installation messages. If you want only abbreviated messages, you can omit the qualifier. The screen displays the name of the product you are installing. 3. Press Return to continue with the installation. DIGITAL NAS Packages Preparation and Installation 2-9 A screen message reports the number of blocks required and asks if you want to use the default values in the installation. 4. Press Return to use the default values. The installation asks if you want to view the values (answers you have given to any installation questions). 5. Press Return to accept the values without reviewing them. Screen messages report the progress of the installation. Section B.1 in Appendix B provides a sample DIGITAL NAS packages base kit installation log. 2.5 Using the VMSINSTAL Utility Use the VMSINSTAL utility to install most of the DIGITAL NAS components. To use VMSINSTAL: 1. Set your default directory to SYS$UPDATE. 2. Invoke VMSINSTAL using a command in the following format: $ @SYS$UPDATE:VMSINSTAL save-set-name device-name: OPTION N In this format, save-set-name is the name of the save set you are installing and device-name: is the name of the device on which you are installing. If you do not supply these two parameters VMSINSTAL prompts you for the product and device names. If you want to be prompted for the product and device names and to display or print the release notes, use the following format: $ @SYS$UPDATE:VMSINSTAL "" "" OPTIONS N 3. VMSINSTAL then checks the following: o Whether you logged in to a privileged account. DIGITAL recommends that you install software from the system manager's account with your default device and directory set to SYS$UPDATE. 2-10 DIGITAL NAS Packages Preparation and Installation o Whether you have adequate quotas for installation. VMSINSTAL checks for the following quota values: ASTLM = 24 BIOLM = 18 BYTLM = 200 000 DIOLM = 18 ENQLM = 200 FILLM = 100 PRCLM = 3 o Whether DECnet is up and running. o Whether any users are logged in to the system. If either of these last two conditions exist, you should remove the condition before resuming the installation procedure. If VMSINSTAL detects any problems during the installation, it notifies you and asks if you want to continue the installation. If you have any questions about whether you should continue, refer to the DIGITAL NAS packages component installation guides. To stop the installation process and correct the situation, enter N and press Return. Then correct the problem and restart the installation. 2.6 Modifying System Parameters This section describes: o Checking system parameter values o Using MODPARAMS_NAS*.DAT to update system parameters o Calculating the values for GBLPAGES and GBLSECTIONS o Changing system parameter values with AUTOGEN DIGITAL NAS Packages Preparation and Installation 2-11 2.6.1 Checking System Parameter Values To check the values of your system parameters: 1. Enter the following command at the DCL prompt to invoke the System Generation Utility (SYSGEN): $ RUN SYS$SYSTEM:SYSGEN The screen displays the SYSGEN> prompt. 2. Enter the SHOW command and a system parameter name to display the value of that parameter. The values displayed should equal or exceed the value of each system parameter listed in the appropriate System Parameter Requirements table in Section A.2 for the DIGITAL NAS package you are installing: DIGITAL NAS Client 150 Table A-3 DIGITAL NAS Base Server 200 Table A-5 DIGITAL NAS Client 250 Table A-7 DIGITAL NAS Server 300 Table A-9 DIGITAL NAS Production Server 400 Table A-11 For example, the following command displays the value for the WSMAX system parameter: SYSGEN> SHOW WSMAX 3. After checking the parameters, enter EXIT at the SYSGEN> prompt to return to DCL level. 2.6.2 Using MODPARAMS_NAS*.DAT to Update System Parameters The DIGITAL NAS Packages Version 8.1a provide a choice of data files (MODPARAMS_NAS*.DAT) that can be edited into your MODPARAMS.DAT file. This provides the minimum parameters necessary in order to install the DIGITAL NAS packages. You may need to increase the parameters specified in these files, depending on what other products are installed on your system. Table 2-2 lists the files that are provided in SYS$SYSTEM. 2-12 DIGITAL NAS Packages Preparation and Installation Table 2-2 MODPARAM Files Installed by DIGITAL NAS __________Packages________________________________________ DIGITAL_NAS_Package_____MODPARAM_File_Name________________ DIGITAL NAS Client 150 MODPARAMS_NAS_CLIENT_150.DAT DIGITAL NAS Base MODPARAMS_NAS_BASE_SERVER.DAT Server 200 DIGITAL NAS Client 250 MODPARAMS_NAS_CLIENT.DAT DIGITAL NAS Server 300 MODPARAMS_NAS_SERVER.DAT DIGITAL NAS Production MODPARAMS_NAS_PROD_SERVER.DAT Server_400________________________________________________ To use MODPARAMS_NAS*.DAT to update your MODPARAMS.DAT file: 1. If your system has a previously installed version of the DIGITAL NAS packages, edit SYS$SYSTEM:MODPARAMS.DAT to remove the existing lines from MODPARAMS_NAS*.DAT. 2. Append the appropriate SYS$SYSTEM:MODPARAMS_NAS*.DAT file to the end of SYS$SYSTEM:MODPARAMS.DAT. 3. After combining the two files, if there are two values for the same MIN_parameter, delete the line that contains the lower value. If you refer to MODPARAMS_NAS.DAT, please update your MODPARAMS.DAT file to reference the new DIGITAL NAS packages parameter files. 2.6.3 Calculating the Values for GBLPAGES and GBLSECTIONS To install and run the DIGITAL NAS packages, you must have sufficient free global pagelets and global sections. The values for GBLPAGES and GBLSECTIONS in the System Parameter Requirements tables provided in Section A.2 indicate the unused global sections and unused global pagelets your system needs for the installation to process successfully. To calculate how many unused global pagelets and global sections your system has: 1. Run the Install Utility (INSTALL) using the following command: DIGITAL NAS Packages Preparation and Installation 2-13 $ INSTALL LIST /GLOBAL /SUMMARY The VMS Install Utility displays a summary of global pagelets and global sections used by your system, as well as the current number of unused global pagelets. For example: Summary of Local Memory Global Sections 258 Global Sections Used, 22580/3420 Global Pages Used/Unused 2. Determine if the number of unused global pagelets (3420 in the example) is equal to or greater than what you need. If the number of unused pagelets is less than what you require, you need to increase the value for GBLPAGES. 3. Note the amount shown for Global Sections Used (258 in this example). 4. Run SYSGEN and use the SHOW command to determine how many global sections have been allocated. For example: $ RUN SYS$SYSTEM:SYSGEN SYSGEN> SHOW GBLSECTIONS Parameter Name Current Default Minimum Maximum Unit Dynamic -------------- ------- ------- ------- ------- ---- ------- GBLSECTIONS 512 250 20 4095 Sections 5. Add the amount shown in the summary in step 1 (258) to the value for GBLSECTIONS in the appropriate System Parameter Requirements table provided in Section A.2. If the resulting value is greater than the value for currently available GBLSECTIONS as shown in step 4, you must increase the value of the GBLSECTIONS parameter. Section 2.6.4 describes the procedures for increasing these values using AUTOGEN. Refer to the VMS System Management Manual for information on using AUTOGEN. You can use the WRITE command with the F$GETSYI lexical function to find the number of contiguous free global 2-14 DIGITAL NAS Packages Preparation and Installation pagelets and global sections. The following example shows how to get this information at your terminal (the default for SYS$OUTPUT): $ WRITE SYS$OUTPUT F$GETSYI("CONTIG_GBLPAGES") 15848 $ WRITE SYS$OUTPUT F$GETSYI("FREE_GBLSECTS") 24 2.6.4 Changing System Parameter Values with AUTOGEN The component installation guides provide the detailed preinstallation information for each of the components. A system reboot is necessary to incorporate system parameter changes and should be done using AUTOGEN. Each DIGITAL NAS package component has its own system parameter requirements that would require multiple reboots if treated separately. The System Parameter Requirements tables provided in Section A.2 list the minimum required system parameters for each DIGITAL NAS package. The files MODPARAMS_NAS*.DAT contain these parameters, which you use to reset MODPARAMS.DAT. Using these parameters allows you to reset all your system parameters. Use AUTOGEN to tune the parameters based upon your system workload, and then reboot the system once. By performing these preliminary steps, you avoid a system reboot for each DIGITAL NAS package component to have the parameter changes take effect. Use the AUTOGEN command procedure to change system parameters. AUTOGEN automatically adjusts values for parameters that are associated with the values you reset manually. To change system parameters with AUTOGEN: 1. Edit the file SYS$SYSTEM:MODPARAMS.DAT using these guidelines: o To change a parameter value listed in this file, delete the current value associated with that parameter and enter the new value. o To add a new parameter, add a line to the file that includes both the name of the parameter and its value. For example: WSMAX = 4200 DIGITAL NAS Packages Preparation and Installation 2-15 o To modify incremental parameters such as GBLPAGES and GBLSECTS, use ADD_. For example, the following increases the global page setting by 2000: ADD_GBLPAGES = 2000 When you set the page file quota, do not use a value that exceeds the amount of page file space available on the system. It is recommended that you use MIN_parameter to set parameters in MODPARAMS.DAT. (An exception does exist: values for NPAGEDYN are additive.) Add the values supplied in the appropriate system parameter requirements table from Section A.2 to the current system values. Use SYSGEN to determine the current values of NPAGEDYN and NPAGEVIR. For example: $ MCR SYSGEN SYSGEN> USE ACTIVE SYSGEN> SHOW NPAGEDYN Parameter Name Current Default Min. Max. Unit Dynamic -------------- ------- ------- ------- ------- ---- ------- NPAGEDYN 4884992 360000 16384 -1 Bytes Current shows what your system is currently using. In this example you would add a line in the following format to your MODPARAMS.DAT file: MIN_NPAGEDYN = 4884992 + value-from-sys-param-table In this format, value-from-sys-param-table is the value from the appropriate System Parameter Requirements table in Section A.2. 2. Exit from the editor and execute the AUTOGEN procedure to recalculate your system parameters and reboot using the following command: $ @SYS$UPDATE:AUTOGEN GETDATA REBOOT ________________________Note ________________________ When you specify REBOOT, AUTOGEN performs an automatic system shutdown and then reboots the system. Any users logged on to the system are immediately disconnected during the shutdown. The 2-16 DIGITAL NAS Packages Preparation and Installation automatic reboot puts the new parameter values into effect. _____________________________________________________ The AUTOGEN Utility automatically adjusts some of the SYSGEN parameters based on the consumption of resources since the last reboot. If you do not want to take advantage of this automatic adjustment, include the NOFEEDBACK qualifier on the AUTOGEN command line. For more information about using AUTOGEN, see the OpenVMS System Manager's Manual: Essentials. 2.7 Identifying and Reporting DIGITAL NAS Packages Installation Problems If an error occurs that you believe is caused by a problem with the DIGITAL NAS packages installation, make sure that you have read the DIGITAL NAS packages release notes to see if the problem is known and has a solution. If your problem is not resolved by this means, do one of the following: o If you have a BASIC or DECsupport Software Agreement, call your Customer Support Center. o If you have a Self-Maintenance Software Agreement, submit a Software Performance Report (SPR). o If neither of the above statements describes your situation and you are under warranty, submit an SPR. In your call or SPR, please note which DIGITAL NAS package component you are having a problem with. DIGITAL NAS Packages Preparation and Installation 2-17 3 ________________________________________________________________ Installing the DIGITAL NAS Packages Components This chapter describes the following: o Using the DIGITAL NAS Reporter (Section 3.1) o Component preinstallation considerations (Section 3.2) o Component preinstallation checklist (Section 3.3) o Component installation order and dependencies (Section 3.4) o Component installation (Section 3.5) o Postinstallation considerations (Section 3.6) 3.1 Using the DIGITAL NAS Reporter The DIGITAL NAS Reporter is a utility installed as part of the DIGITAL NAS packages base kit. You run the DIGITAL NAS Reporter to analyze your system before installing DIGITAL NAS packages' components. This program generates a report that provides you with the following: o General information about the system such as operating system, hardware type, and the version of DIGITAL NAS packages installed on the system. o A list of the DIGITAL NAS packages licenses installed on your system. o A detailed breakdown of the LMF names your DIGITAL NAS packages license enables; for example, NET-APP-SUP-250 enables DW-MOTIF and UCX among others. You will find this breakdown valuable when you install the various DIGITAL NAS packages components on your system. Installing the DIGITAL NAS Packages Components 3-1 o An analysis of the LMF names that are part of a DIGITAL NAS packages license. This analysis alerts you to any duplicate licenses that you may have installed on your system. If you find any duplicate licenses, you should check to see if the licenses are actual duplicates. If so, you may be able to move these licenses to another system that is not running DIGITAL NAS. For more information, see Section 2.2.4. Remember an upgrade license (DIGITAL NAS 200 to DIGITAL NAS 300 for example), requires a return of the previous lower level license. You will not be allowed to use any duplicate licenses in this case. To invoke the DIGITAL NAS Reporter, enter the following command: $ @SYS$UPDATE:NAS_REPORTER The DIGITAL NAS Reporter analyzes your system and outputs the following information to your terminal: The DIGITAL NAS Report has been placed in the file SYS$UPDATE:NAS_REPORTER.LIS. Review the report generated by the DIGITAL NAS Reporter before installing the DIGITAL NAS packages components. The NAS_REPORTER.COM command procedure invokes the program NAS_REPORTER.EXE. Do not try to invoke NAS_REPORTER.EXE without running the command procedure. NAS_REPORTER.EXE depends on having the local environment set up by the command procedure in order to produce valid results. Appendix C provides a sample DIGITAL NAS Reporter report. 3.2 Component Preinstallation Considerations This section describes some considerations you should be aware of before beginning the component installations. 3-2 Installing the DIGITAL NAS Packages Components 3.2.1 DECnet-Plus Considerations The DIGITAL NAS packages provides DECnet-Plus[TM] for OpenVMS Alpha for OpenVMS Alpha, which is an implementation of Phase V of the DIGITAL Network Architecture (DNA). DECnet-Plus allows you to use DECnet protocols, OSI protocols, or both. You can also run DECnet and OSI applications, unchanged, over TCP/IP, and products from DIGITAL or from third parties. To configure DECnet-Plus you can use the BASIC, FAST, or ADVANCED configuration. The BASIC configuration can be used in most cases. For details see the following manuals: o DECnet-Plus for OpenVMS Installation and Basic Configuration Manual o DECnet-Plus for OpenVMS Applications Installation and Advanced Configuration Manual 3.2.2 DECnet-Plus Component Restrictions A limited number of DIGITAL NAS packages' components have some restrictions regarding the use of DECnet: o DIGITAL PATHWORKS for OpenVMS This component does not support the use of long names. It will work with DECnet-Plus using node synonyms (allowing continued use of the standard 6-character node name). o PrintServer Software See the component documentation for details. o DIGITAL TCP/IP Services for OpenVMS If you plan to use the DECnet-Plus over TCP/IP feature, then TCP\IP software is a prerequisite. Your end system will be able to operate over TCP\IP only if the TCP\IP product used on your system supports the PATHWORKS Internet Protocol (PWIP) interface. Installing the DIGITAL NAS Packages Components 3-3 3.2.3 Oracle Rdb[TM] and Oracle Trace[TM] Considerations If you have installed Version 5.0 or earlier of the DIGITAL NAS Client 250, DIGITAL NAS Server 300 or DIGITAL NAS Production Server 400 packages, and are using the Oracle Rdb Run-Time license or the DECtrace license included with that package, your license will continue to be honored after upgrading to DIGITAL NAS Packages Version 8.1a. 3.2.4 DECwindows Motif for OpenVMS Alpha Considerations The following section describes considerations you should take into account when installing DECwindows Motif for OpenVMS Alpha. See Table 3-2 for instructions on the correct installation order for DECwindows Motif and language variant subsets. 3.2.4.1 Character-Set Restrictions There are some limitations on the use of the DECwindows Motif language variants due to the differences between character sets used by the various languages supported in the DIGITAL NAS packages. This limitation restricts which combination of languages can be used on a given system. Table 3-1 shows which DECwindows Motif language variants correspond to the various International Organization for Standardization (ISO) character sets. Any language that supports a given character set can function on the same system as any other language that uses the same character set. For example, French and German can function on the same system. It is not possible to mix languages from different character sets on the same system. For example, German and Russian cannot function on the same system. Please refer to the individual product release notes for further information. 3-4 Installing the DIGITAL NAS Packages Components Table 3-1 DECwindows Motif Language Variant Character __________Sets____________________________________________ Character Set_________Languages_Supported___________________________ ISO-Latin1 French, German, Italian, Spanish, Swedish ISO-Latin2 Czech, Hungarian, Polish, Slovak ISO-Latin Cyrillic Russian ___________________________________________________________ 3.3 Component Preinstallation Checklist Before installing components, be sure you have: o Backed up your system, as described in Section 2.1.4 o Registered your DIGITAL NAS packages' licenses, as described in Section 2.2 o Installed the DIGITAL NAS packages' base kit, as described in Section 2.4 o Modified your system parameters and rebooted, as described in Section 2.6 o Print and read the component installation guides, as described in Section 1.3.2 3.4 Component Installation Order and Dependencies Table 3-2 provides the installation order and dependencies for all the components provided through the DIGITAL NAS packages: o Component Name lists the components. You do not have to install the entire DIGITAL NAS packages collection. Those components you do install must be installed in the order shown. Installing the DIGITAL NAS Packages Components 3-5 o PCSI Name or VMSINSTAL Save Set Name differentiates between components installed using VMSINSTAL and those installed using the POLYCENTER Software Installation Utility (PCSI). - Use VMSINSTAL to install those components designated in the format component-id.%, where component-id is the component save set name. - Use PCSI to install those components designated in the format component-id/Version=version-number, where component-id is the PCSI name and version- number is the component version number. o Dependencies indicates component dependencies. These products must be installed on your system before you can install or run a specific component. Be sure to read the component installation guides before you install; they provide details on installation and configuration that are not described in this summary guide. ________________________Note ________________________ You must install and license the OpenVMS Alpha operating system before installing the DIGITAL NAS packages base kit or any of the DIGITAL NAS packages components. _____________________________________________________ Table_3-2_DIGITAL_NAS_Packages_Installation_Order_and_Dependencies PCSI Name or Component_Name__________VMSINSTAL_Save_Set_Name_________________ DIGITAL NAS Packages OpenVMS Alpha latest version Base Kit Edit MODPARAMS.DAT as necessary and reboot using AUTOGEN. See Section 2.6. (continued on next page) 3-6 Installing the DIGITAL NAS Packages Components Table 3-2 (Cont.) DIGITAL NAS Packages Installation Order and __________________Dependencies__________________________________ PCSI Name or Component_Name__________VMSINSTAL_Save_Set_Name_________________ VMScluster Software[1] OpenVMS Cluster Client V/A[1] DECnet[1] RMS Journaling[1] Volume Shadowing[1] DECnet-Plus See individual component packages for Base Kit restriction on the use of transports, OSI Applications including: DECnet-Plus for OpenVMS Kit[2] Alpha, DECnet Phase IV and DIGITAL TCP/IP DEC Distributed Queuing Service DECwindows Motif for OpenVMS Alpha V1.2-4 [1]OpenVMS_System-Integrated_Product_(SIP)._A_license_for_use_is all that is needed. [2]The OSI Applications Kit is optional. You only need to install it if you plan to use an OSI application such as FTAM (file transfer access management), VT (Virtual terminal for remote login), X.400 (electronic mail), X.500 (distributed) directory services or any other OSI application. (continued on next page) Installing the DIGITAL NAS Packages Components 3-7 Table 3-2 (Cont.) DIGITAL NAS Packages Installation Order and __________________Dependencies__________________________________ PCSI Name or Component_Name__________VMSINSTAL_Save_Set_Name_________________ DECwindows Motif V1.2-3 DECwindows Motif/Francais DECwindows Motif V1.2-3 DECwindows Motif/Italian DECwindows Motif V1.2-3 DECwindows Motif/Deutsch DECwindows Motif (WW) V1.2-3 DECwindows Motif/Español DECwindows Motif (WW) V1.2-3 DECwindows Motif/Svenska DECwindows Motif (WW) V1.2-3 DECwindows Motif Worlwide (WW) Support for OpenVMS Alpha V1.2-3 DECwindows Motif (WW) V1.2-3 DECwindows Motif/Cesky DECwindows Motif (WW) V1.2-3 DECwindows Motif/Magyar DECwindows Motif (WW) V1.2-3 DECwindows Motif/Polski DECwindows Motif (WW) V1.2-3 DECwindows Motif/Russkij DECwindows Motif (WW) V1.2-3 DECwindows Motif/Slovensky DECwindows Motif (WW) V1.2-3 DIGITAL TCP/IP Services POSIX [3] DIGITAL PATHWORKS for OpenVMS [3]The_license_to_run_this_product_is_not_supplied_by_DIGITAL_NAS packages. (continued on next page) 3-8 Installing the DIGITAL NAS Packages Components Table 3-2 (Cont.) DIGITAL NAS Packages Installation Order and __________________Dependencies__________________________________ PCSI Name or Component_Name__________VMSINSTAL_Save_Set_Name_________________ DECprint Supervisor PrintServer Software[3] DECforms ACMS Reliable Transaction Router [3]The_license_to_run_this_product_is_not_supplied_by_DIGITAL___ NAS packages. ________________________________________________________________ 3.5 Component Installation To install DIGITAL NAS packages' components, complete the following steps: 1. Perform the component installations using either the VMSINSTAL Utility, which is described in Section 2.5, or the POLYCENTER Software Installation (PCSI) Utility. Refer to the specific directions in each component installation guide. 2. Configure each component as required by the component installation guide. Following configuration, rerun the component Installation Verification Procedure (IVP) if required. For more details about postinstallation requirements, see Section 3.6. 3. Using the component order in Table 3-2, add the startup commands for the components you have installed to SYS$MANAGER:SYSTARTUP_VMS.COM. ________________________Note ________________________ Any component installation that requires editing of the SYS$MANAGER:SYSTARTUP procedure should refer to SYS$MANAGER:SYSTARTUP_VMS.COM, not SYS$MANAGER:SYSTARTUP_V5.COM. _____________________________________________________ Installing the DIGITAL NAS Packages Components 3-9 4. Edit MODPARAMS.DAT as necessary, following the instructions in Section 2.6. 5. Reboot your system using AUTOGEN, as indicated in the component installation guides. 3.6 Postinstallation Considerations Each DIGITAL NAS packages' component has its own postinstallation requirements. Read the installation guide for each component you install to determine what postinstallation actions you need to take. Note whether you must reboot your system to complete the installation. It is not required that you configure DECnet in order to install DECwindows Motif. If you decide to use DECwindows Motif in conjunction with DECnet, be sure to follow the postinstallation instructions in the DECwindows Motif Installation Guide. In some cases, an Installation Verification Procedure (IVP) might fail. Even though the IVP has failed, the product may have been installed successfully. Please consult your component installation guide for further information. 3-10 Installing the DIGITAL NAS Packages Components 4 ________________________________________________________________ Upgrading DIGITAL NAS Packages Versions or Levels This chapter describes the following: o Installing DIGITAL NAS Packages Version 8.1a software on a system containing an earlier version of DIGITAL NAS packages software (Section 4.1) o Installing a higher-level DIGITAL NAS package (Section 4.2) o Installing a lower-level DIGITAL NAS package license (Section 4.3) ________________________Note ________________________ If you are performing more than one of the previ- ously listed actions, perform them in the order listed. _____________________________________________________ 4.1 Installing a Higher Version of DIGITAL NAS Packages Software This section describes how to install DIGITAL NAS Packages software on a system already containing an earlier version of DIGITAL NAS packages software. You must install the new DIGITAL NAS Packages base kit if you are updating from a previous version of DIGITAL NAS packages. The following explains how to determine if it is necessary to replace your current PAK and how to do so. Upgrading DIGITAL NAS Packages Versions or Levels 4-1 Check the current license status by entering the following command from the node you want to license: $ SHOW LICENSE NET-APP-SUP-* If you see the message %SHOW-I-NOLICMATCH, no licenses match the search criteria; you need to install the new PAK. Register and load the new DIGITAL NAS packages license. See Section 2.2.2 for details. If the SHOW LICENSE command displays a license, compare the level of the new license to the level of the installed license: o If the new license level is lower than the installed license level, see Section 4.3. o If the new license level is the same, you do not need to install a new PAK. o If the new license level is higher, proceed to Section 4.2. 4.2 Installing a Higher-Level of DIGITAL NAS Packages Software Higher levels of the DIGITAL NAS packages provide additional software to support additional user needs. The steps involved in installing a higher DIGITAL NAS packages level are the same as they are for installing DIGITAL NAS Packages Version 8.1a for the first time: 1. Register and load the new DIGITAL NAS packages license (see Section 2.2.2). 2. Readjust your system parameters to reflect the requirements of the new DIGITAL NAS level you install (see Section A.1.3). 3. Run the DIGITAL NAS Reporter to see what is available. 4. Reinstall the DIGITAL NAS packages components (see Chapter 3). ________________________Note ________________________ Remember an upgrade license (DIGITAL NAS 200 to DIGITAL NAS 300 for example), requires a return of 4-2 Upgrading DIGITAL NAS Packages Versions or Levels the previous lower level license. You will not be allowed to use any duplicate licenses in this case. _____________________________________________________ 4.3 Installing a Lower-Level DIGITAL NAS Packages License Installing a new version of DIGITAL NAS packages with a lower-level DIGITAL NAS packages license is not recommended. If you remove the old license when you attempt to install a lower-level DIGITAL NAS packages license, DIGITAL NAS packages components that are part of the higher level might not run. 4.4 Installing DIGITAL NAS on an earlier version of OpenVMS If you plan to run DIGITAL NAS on an earlier version of the OpenVMS operating system, you may need an update to the LMF group table. An update patch kit may be obtained at http://www.service.digital.com. Search for the filename ALPLMF01_061. Upgrading DIGITAL NAS Packages Versions or Levels 4-3 A ________________________________________________________________ Component Installation Prerequisites This appendix has two major sections: prerequisites common to all packages and package-specific prerequisites. A.1 Prerequisites Common to All Packages The prerequisites described in this section are common to all the DIGITAL NAS packages. See Section A.2 for specific values for prerequisites for each package. A.1.1 Privileges To install the DIGITAL NAS packages, you must be logged in to an account that has full system privileges. If you are installing a component using VMSINSTAL, note that VMSINSTAL turns off BYPASS privilege at the start of the installation. A.1.2 Required Disk Space and Installation Times The following tables in Section A.2 give the disk space requirements for the individual DIGITAL NAS packages components, both during and after installation: DIGITAL NAS Client 150 Table A-2 DIGITAL NAS Base Server 200 Table A-4 DIGITAL NAS Client 250 Table A-6 DIGITAL NAS Server 300 Table A-8 DIGITAL NAS Production Server 400 Table A-10 These tables also give the approximate installation times for the separate components based on CD-ROM installations. In general, the times given are for the VMSINSTAL procedure or PCSI utility only. They do not include the time required for pre- and postinstallation tasks, or the time required for running the Installation Verification Procedures (IVPs). Component Installation Prerequisites A-1 A.1.3 System Parameter Requirements The following tables in Section A.2 give the system parameter values for each DIGITAL NAS package: DIGITAL NAS Client 150 Table A-3 DIGITAL NAS Base Server 200 Table A-5 DIGITAL NAS Client 250 Table A-7 DIGITAL NAS Server 300 Table A-9 DIGITAL NAS Production Server 400 Table A-11 The values given are for a fully installed configuration. (See Section 2.6.4 to fine tune system parameters for the particular work load needs of your system.) ________________________Note ________________________ A system reboot is necessary to incorporate system parameter changes and should be done using AUTOGEN (see Section 2.6.4). _____________________________________________________ The values shown in the tables in Section A.2 are intended as a general guideline and should not be construed as absolutes. Each table reflects the values in the MODPARAMS_NAS*.DAT file for a specific platform, as described in Section 2.6. After the configuration you have installed has been running successfully for some period of time, you may want to change the values for parameters that are not being properly utilized. This is particularly relevant if you have not installed all of the DIGITAL NAS components or you are not using them simultaneously. Use AUTOGEN to size these values according to how you use the system. For DECnet, you must determine the values for SCSNODE, SCSSYSTEMID, and SYSMWCNT (see the PATHWORKS V5 for OpenVMS (LAN Manager) Server Installation and Upgrade Guide). For example: SCSNODE = same as DECnet node name for the server SCSSYSTEMID = (1024x DECnet area number) + DECnet node number SYSMWCNT = current value of SYSMWCNT + (number of GBLPAGES being added / 128) Round SYSMWCNT up to the nearest integer. A-2 Component Installation Prerequisites For example, if you are using GBLPAGES=78 000 to install PATHWORKS V5 for OpenVMS, add an additional 610 to SYSMWCNT. If you are in a VMScluster environment, SCSNODE and SCSSYSTEMID should already be appropriately set. If you must change SCSNODE to make it the same as the DECnet node name, you must also create a new queue file and redefine the queues. See the OpenVMS system management documentation for instructions on this procedure. A.1.4 DECnet Executor Parameters Table A-1 lists the DECnet executor parameters, which must have at least the values indicated. Table_A-1_DECnet_Executor_Parameters______________________ Parameter__________Value__________________________________ MAX LINKS 100 PIPELINE_QUOTA_____13_000_________________________________ A.1.5 Identifying and Reporting Component Installation Problems If an error occurs that you believe is caused by a problem with the installation of a DIGITAL NAS package component, make sure that you have read the component installation guides to see if the problem is known and has a solution. If your problem is not resolved by this means, do one of the following: o If you have a BASIC or DECsupport Software Agreement, call your Customer Support Center. o If you have a Self-Maintenance Software Agreement, submit a Software Performance Report (SPR). o If neither of the above statements describes your situation and you are under warranty, submit an SPR. In your call or SPR, please note which DIGITAL NAS packages component you are having a problem with. Component Installation Prerequisites A-3 A.2 Package-Specific Prerequisites This section provides tables for each of the DIGITAL NAS packages, describing the installation times and disk space required for each component, and the SYSGEN parameters required to run the package if all components are installed. A.2.1 DIGITAL NAS Client 150 Prerequisites Table A-2 describes the disk space and time required to install the components of the DIGITAL NAS Client 150. Table A-2 DIGITAL NAS Client 150 Disk Space and Installation __________Time_Requirements_____________________________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Client 150 During After in Component_________________________InstallationInstallationMinutes DIGITAL NAS Packages Base Kit - 300 100 5-15 NASAXP DECnet-Plus for OpenVMS Alpha [1] 80 000 80 000 5 Base Kit 6 800 6 800 5 OSAK 27 600 27 600 5 FTAM 3 500 3 500 5 VT DIGITAL TCP/IP Client for 17 000 16 000 20 OpenVMS Alpha DECwindows Motif for OpenVMS 177 500[2] 177 500[2] 33 Alpha [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. (continued on next page) A-4 Component Installation Prerequisites Table A-2 (Cont.) DIGITAL NAS Client 150 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Client 150 During After in Component________________________Installation__Installation_Minutes DECwindows Motif for OpenVMS 128 300[2] 128 300[2] 33 Alpha 1.2-3 [1] DECwindows Motif OpenVMS UI /Français 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Italiano 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Deutsch 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Español 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Svenska 1.2-3 17 000 16 000 10 DECwindows Motif Worldwide Support for OpenVMS Alpha 1.2-3 209 000[2] 209 000[2] 33[1] DECwindows Motif (WW) Language Variants DECwindows Motif OpenVMS UI /Cesky 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Magyar 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Polski 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Russkij 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Slovensky 1.2-3 54 000 53 000 30 [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. ________________________________________________________________ Table A-3 describes the SYSGEN parameters required if you install all of the components of the DIGITAL NAS Client Component Installation Prerequisites A-5 150. These SYSGEN parameters are provided in the file MODPARAMS_NAS_BASE_SERVER.DAT. Table_A-3_DIGITAL_NAS_Client_150_System_Parameter_Requirements__ Parameter___________Value_________Notes_________________________ GBLPAGES 230 400[1] GBLPAGFIL 3048[1] GBLSECTIONS 1172[1] CLISYMTBL 400 During installation only. WSMAX 12 000 Minimum. CHANNELCNT 255 Or any number larger than the largest FILLM used on the system (whichever is larger). MAXBUF 8192 If Motif is loaded PROCSECTCNT 64 SWPOUTPGCNT 512 VIRTUALPAGECNT 80 000 Or a number larger than the largest PGFLQUOTA used on the system (whichever is larger). KSTACKPAGES 2 WINDOW_SYSTEM 1 PQL_MASTLM 100 PQL_MBIOLM 100 PQL_MBYTLM 200 000 PQL_MDIOLM 100 PQL_MENQLM 300 PQL_MFILLM 100 PQL_MPGFLQUOTA 32 768 PQL_MPRCLM 10 PQL_MWSDEFAULT 1024 PQL_MWSEXTENT 8192 [1]The_values_given_are_the_number_of_free_(unused)_pages_and___ sections that must be available before installation. (continued on next page) A-6 Component Installation Prerequisites Table A-3 (Cont.) DIGITAL NAS Client 150 System Parameter __________________Requirements__________________________________ Parameter___________Value_________Notes_________________________ PQL_MWSQUOTA 2048 NPAGEDYN 670 000 Minimum. PAGEDYN 289 000 Minimum. GH_RES_CODE 1024 GH_RSRVPGCNT 512 IMGREG_PAGES 2000 SCSNODE See the discussion in Section A.1.3. SCSSYSTEMID See the discussion in Section A.1.3. SYSMWCNT See the discussion in __________________________________Section_A.1.3.________________ A.2.2 DIGITAL NAS Base Server 200 Prerequisites Table A-4 describes the disk space and time required to install the components of the DIGITAL NAS Base Server 200. Table A-4 DIGITAL NAS Base Server 200 Disk Space and Installation __________Time_Requirements_____________________________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Base Server 200 During After in Component_________________________Installation__Installation_Minutes DIGITAL NAS Packages Base Kit - 300 100 5-15 NASAXP (continued on next page) Component Installation Prerequisites A-7 Table A-4 (Cont.) DIGITAL NAS Base Server 200 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Base Server 200 During After in Component_________________________InstallationInstallationMinutes DECnet-Plus for OpenVMS Alpha [1] 80 000 80 000 5 Base Kit 6 800 6 800 5 OSAK 27 600 27 600 5 FTAM 3 500 3 500 5 VT DECprint Supervisor (DCPS) for 8 800 4 500 15 OpenVMS Alpha (Base, Open, and Plus) DIGITAL TCP/IP Services for 17 000 16 000 20 OpenVMS Alpha DECwindows Motif for OpenVMS 177 500[2] 177 500[2] 33 Alpha DECwindows Motif for OpenVMS 209 000[2] 209 000[2] 33[1] Alpha 1.2-3 DECwindows Motif OpenVMS UI /Français 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Italiano 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Deutsch 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Español 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Svenska 1.2-3 17 000 16 000 10 [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. (continued on next page) A-8 Component Installation Prerequisites Table A-4 (Cont.) DIGITAL NAS Base Server 200 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Base Server 200 During After in Component_________________________InstallationInstallationMinutes DECwindows Motif Worldwide 209 000[2] 209 000[2] 33[1] Support for OpenVMS Alpha 1.2-3 DECwindows Motif (WW) Language Variants 54 000 53 000 30 DECwindows Motif OpenVMS UI /Cesky 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Magyar 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Polski 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Russkij 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Slovensky 1.2-3 54 000 53 000 30 DIGITAL PATHWORKS for OpenVMS 60 000 60 000 26 PATHWORKS for OpenVMS (NetWare) 6 000 6 000 26 PrintServer Software for 33 000 33 000 20 OpenVMS Alpha [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. ________________________________________________________________ Table A-5 describes the SYSGEN parameters required if you install all of the components of the DIGITAL NAS Base Server 200. These SYSGEN parameters are provided in the file MODPARAMS_NAS_BASE_SERVER.DAT. Component Installation Prerequisites A-9 Table A-5 DIGITAL NAS Base Server 200 System Parameter __________Requirements__________________________________________ Parameter___________Value_________Notes_________________________ GBLPAGES 241 664[1] GBLPAGFIL 3048[1] GBLSECTIONS 1275[1] MAXPROCESSCNT 12 CLISYMTBL 400 During installation only. WSMAX 19 549 Minimum. CHANNELCNT 315 Or any number larger than the largest FILLM used on the system (whichever is larger). MAXBUF 8192 If Motif is loaded PROCSECTCNT 64 SWPOUTPGCNT 512 VIRTUALPAGECNT 80 000 Or a number larger than the largest PGFLQUOTA used on the system (whichever is larger). KSTACKPAGES 2 WINDOW_SYSTEM 1 PQL_MASTLM 100 PQL_MBIOLM 100 PQL_MBYTLM 200 000 PQL_MDIOLM 100 PQL_MENQLM 300 PQL_MFILLM 100 PQL_MPGFLQUOTA 32 768 PQL_MPRCLM 10 PQL_MWSDEFAULT 1024 PQL_MWSEXTENT 8192 PQL_MWSQUOTA 2048 [1]The_values_given_are_the_number_of_free_(unused)_pages_and___ sections that must be available before installation. (continued on next page) A-10 Component Installation Prerequisites Table A-5 (Cont.) DIGITAL NAS Base Server 200 System Parameter __________________Requirements__________________________________ Parameter___________Value_________Notes_________________________ NPAGEDYN 670 000 Minimum. PAGEDYN 289 000 Minimum. GH_RES_CODE 1024 GH_RSRVPGCNT 512 IMGREG_PAGES 2000 SCSNODE See the discussion in Section A.1.3. SCSSYSTEMID See the discussion in Section A.1.3. SYSMWCNT See the discussion in __________________________________Section_A.1.3.________________ A.2.3 DIGITAL NAS Client 250 Prerequisites Table A-6 describes the disk space time required to install the components of the DIGITAL NAS Client 250. Table A-6 DIGITAL NAS Client 250 Disk Space and Installation __________Time_Requirements_____________________________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Client 250 During After in Component_________________________InstallationInstallationMinutes DIGITAL NAS Packages Base Kit: 300 100 5-15 NASAXP DEC Distributed Queuing Service 4 500 2 300 10 for OpenVMS DECforms for OpenVMS Alpha 2 500 2 000 5 Run-Time Only System (continued on next page) Component Installation Prerequisites A-11 Table A-6 (Cont.) DIGITAL NAS Client 250 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Client 250 During After in Component_________________________InstallationInstallationMinutes DECnet-Plus for OpenVMS Alpha [1] 80 000 80 000 5 Base Kit 6 800 6 800 5 OSAK 27 600 27 600 5 FTAM 3 500 3 500 5 VT DECprint Supervisor (DCPS) for 8 800 4 500 15 OpenVMS Alpha (Base and Open) DIGITAL TCP/IP Client for 17 000 16 000 20 OpenVMS Alpha DECwindows Motif for OpenVMS 177 500[2] 177 500[2] 33 Alpha DECwindows Motif for OpenVMS 128 300[2] 128 300[2] 33[1] Alpha 1.2-3 DECwindows Motif OpenVMS UI /Français 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Italiano 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Deutsch 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Español 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Svenska 1.2-3 17 000 16 000 10 DECwindows Motif Worldwide 209 000[2] 209 000[2] 33 Support for OpenVMS Alpha 1.2-3[1] [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. (continued on next page) A-12 Component Installation Prerequisites Table A-6 (Cont.) DIGITAL NAS Client 250 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Client 250 During After in Component_________________________InstallationInstallationMinutes DECwindows Motif (WW) Language Variants DECwindows Motif OpenVMS UI /Cesky 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Magyar 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Polski 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Russkij 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Slovensky 1.2-3 54 000 53 000 30 Reliable Transaction Router for 40 000 24 000 10 OpenVMS_Alpha___________________________________________________ Table A-7 describes the SYSGEN parameters required if you install all of the components of the DIGITAL NAS Client 250. These SYSGEN parameters are provided in the file MODPARAMS_NAS_CLIENT.DAT. Table A-7 DIGITAL NAS Client 250 System Parameter __________Requirements____________________________________ Parameter___________Value_________Notes___________________ GBLPAGES 253 952[1] GBLPAGFIL 4298[1] GBLSECTIONS 1413[1] MAXPROCESSCNT 32 [1]The_values_given_are_the_number_of_free_(unused)_pages_ and sections that must be available before installation. (continued on next page) Component Installation Prerequisites A-13 Table A-7 (Cont.) DIGITAL NAS Client 250 System Parameter __________________Requirements____________________________ Parameter___________Value_________Notes___________________ CLISYMTBL 400 During installation only. LOCKIDTBL 256 LOCKIDTBL_MAX 2048 RESHASHTBL 512 LOAD_SYS_IMAGES 7 WSMAX 12 000 Minimum. CHANNELCNT 255 Or any number larger than the largest FILLM used on the system (whichever is larger). MAXBUF 8192 If DECwindows Motif is loaded. PROCSECTCNT 64 SWPOUTPGCNT 512 VIRTUALPAGECNT 80 000 Or a number larger than the largest PGFLQUOTA used on the system (whichever is larger). KSTACKPAGES 2 WINDOW_SYSTEM 1 PQL_MASTLM 100 PQL_MBIOLM 100 PQL_MBYTLM 200 000 PQL_MDIOLM 100 PQL_DENQLM 1000 PQL_MENQLM 300 PQL_MFILLM 100 PQL_MPGFLQUOTA 32 768 PQL_MPRCLM 10 (continued on next page) A-14 Component Installation Prerequisites Table A-7 (Cont.) DIGITAL NAS Client 250 System Parameter __________________Requirements____________________________ Parameter___________Value_________Notes___________________ PQL_MWSDEFAULT 1024 PQL_MWSEXTENT 8192 PQL_MWSQUOTA 2048 NPAGEDYN 670 000 Minimum. PAGEDYN 289 000 Minimum. GH_RES_CODE 1024 GH_RSRVPGCNT 512 IMGREG_PAGES 2000 SCSNODE See the discussion in Section A.1.3. SCSSYSTEMID See the discussion in Section A.1.3. SYSMWCNT See the discussion in __________________________________Section_A.1.3.__________ A.2.4 DIGITAL NAS Server 300 Prerequisites Table A-8 describes the disk space and time required to install the components of the DIGITAL NAS Server 300. Table A-8 DIGITAL NAS Server 300 Disk Space and Installation __________Time_Requirements_____________________________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Server 300 During After in Component_________________________InstallationInstallationMinutes DIGITAL NAS Packages Base Kit - 300 100 5-15 NASAXP DEC Distributed Queuing Service 4 500 2 300 10 for OpenVMS (continued on next page) Component Installation Prerequisites A-15 Table A-8 (Cont.) DIGITAL NAS Server 300 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Server 300 During After in Component_________________________InstallationInstallationMinutes DECforms for OpenVMS Alpha 2 500 2 000 5 Run-Time Only System DECnet-Plus for OpenVMS Alpha[1] 80 000 80 000 5 Base Kit 6 800 6 800 5 OSAK 27 600 27 600 5 FTAM 3 500 3 500 5 VT DECprint Supervisor (DCPS) for 8 800 4 500 15 OpenVMS Alpha (Base, Open, and Plus) DIGITAL TCP/IP Services for 17 000 16 000 20 OpenVMS Alpha DECwindows Motif for OpenVMS 177 500[2] 177 500[2] 33 Alpha DECwindows Motif for OpenVMS 128 300[2] 128 300[2] 33[1] Alpha 1.2-3 DECwindows Motif OpenVMS UI /Français 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Italiano 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI 17 000 16 000 /Deutsch 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Español 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Svenska 1.2-3 17 000 16 000 10 [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. (continued on next page) A-16 Component Installation Prerequisites Table A-8 (Cont.) DIGITAL NAS Server 300 Disk Space and __________________Installation_Time_Requirements________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Server 300 During After in Component_________________________InstallationInstallationMinutes DECwindows Motif Worldwide 209 000[2] 209 000[2] 33[1] Support for OpenVMS Alpha 1.2-3 DECwindows Motif (WW) Language Variants DECwindows Motif OpenVMS UI /Cesky 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Magyar 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Polski 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Russkij 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Slovensky 1.2-3 54 000 53 000 30 DIGITAL PATHWORKS for OpenVMS 60 000 60 000 26 PATHWORKS for OpenVMS (NetWare) 6 000 6 000 26[3] PrintServer Software for 33 000 33 000 20 OpenVMS Alpha Reliable Transaction Router for 40 000 24 000 10 OpenVMS Alpha (Client) [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be fewer blocks. [3]DIGITAL PATHWORKS for OpenVMS and PATHWORKS for OpenVMS (NetWare) share a common installation process. ________________________________________________________________ Table A-9 describes the SYSGEN parameters required if you install all of the components of the DIGITAL NAS Server 300. These SYSGEN parameters are provided in the file MODPARAMS_NAS_SERVER.DAT. Component Installation Prerequisites A-17 Table A-9 DIGITAL NAS Server 300 System Parameter __________Requirements____________________________________ Parameter___________Value_________Notes___________________ GBLPAGES 273 408[1] GBLPAGFIL 4298[1] GBLSECTIONS 1591[1] MAXPROCESSCNT 32 CLISYMTBL 400 During installation only. LOCKIDTBL 256 LOCKIDTBL_MAX 2048 RESHASHTBL 512 LOAD_SYS_IMAGES 7 WSMAX 19 594 Minimum. CHANNELCNT 315 Or any number larger than the largest FILLM used on the system (whichever is larger). MAXBUF 8192 If DECwindows Motif is loaded. PROCSECTCNT 64 SWPOUTPGCNT 512 VIRTUALPAGECNT 80 000 Or a number larger than the largest PGFLQUOTA used on the system (whichever is larger). KSTACKPAGES 2 WINDOW_SYSTEM 1 PQL_MASTLM 100 PQL_MBIOLM 100 PQL_MBYTLM 200 000 [1]The_values_given_are_the_number_of_free_(unused)_pages_ and sections that must be available before installation. (continued on next page) A-18 Component Installation Prerequisites Table A-9 (Cont.) DIGITAL NAS Server 300 System Parameter __________________Requirements____________________________ Parameter___________Value_________Notes___________________ PQL_MDIOLM 100 PQL_DENQLM 1000 PQL_MENQLM 300 PQL_MFILLM 100 PQL_MPGFLQUOTA 32 768 PQL_MPRCLM 10 PQL_MWSDEFAULT 1024 PQL_MWSEXTENT 8192 PQL_MWSQUOTA 2048 NPAGEDYN 670 000 Minimum. PAGEDYN 289 000 Minimum. GH_RES_CODE 1024 GH_RSRVPGCNT 512 IMGREG_PAGES 2000 SCSNODE See the discussion in Section A.1.3. SCSSYSTEMID See the discussion in Section A.1.3. SYSMWCNT See the discussion in __________________________________Section_A.1.3.__________ A.2.5 DIGITAL NAS Production Server 400 Prerequisites Table A-10 describes the disk space and time required to install the components of the DIGITAL NAS Production Server 400. Component Installation Prerequisites A-19 Table A-10 DIGITAL NAS Production Server 400 Disk Space and ___________Installation_Time_Requirements_______________________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Production Server During After in 400_Component_____________________InstallationInstallationMinutes DIGITAL NAS Packages Base Kit - 300 100 5-15 NASAXP DEC Distributed Queuing Service 4 500 2 300 10 for OpenVMS DECforms for OpenVMS Alpha 2 500 2 000 5 Run-Time Only System DECnet-Plus for OpenVMS Alpha [1] 80 000 80 000 5 Base Kit 6 800 6 800 5 OSAK 27 600 27 600 5 FTAM 3 500 3 500 5 VT DECprint Supervisor (DCPS) for 8 800 4 500 15 OpenVMS Alpha DIGITAL TCP/IP Services for 17 000 16 000 20 OpenVMS Alpha DECwindows Motif for OpenVMS 177 500[2] 177 500[2] 33 Alpha [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be less. (continued on next page) A-20 Component Installation Prerequisites Table A-10 (Cont.) DIGITAL NAS Production Server 400 Disk Space ___________________and_Installation_Time_Requirements___________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Production Server During After in 400_Component_____________________InstallationInstallationMinutes DECwindows Motif for OpenVMS 128 300[2] 128 300[2] 33[1] Alpha 1.2-3 DECwindows Motif OpenVMS UI /Français 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Italiano 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Deutsch 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Español 1.2-3 17 000 16 000 10 DECwindows Motif OpenVMS UI /Svenska 1.2-3 17 000 16 000 10 DECwindows Motif Worldwide 209 000[2] 209 000[2] 33[1] Support for OpenVMS Alpha DECwindows Motif (WW) Language Variants 54 000 53 000 30 DECwindows Motif OpenVMS UI /Cesky 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Magyar 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Polski 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Russkij 1.2-3 54 000 53 000 30 DECwindows Motif OpenVMS UI /Slovensky 1.2-3 54 000 53 000 30 [1]You_must_run_AUTOGEN_and_reboot_your_system_after_the________ installation of this product. [2]This is the space required to install all of DECwindows Motif. Your actual disk space requirements may be less. (continued on next page) Component Installation Prerequisites A-21 Table A-10 (Cont.) DIGITAL NAS Production Server 400 Disk Space ___________________and_Installation_Time_Requirements___________ Approximate Approximate Approximate Blocks Blocks Time DIGITAL NAS Production Server During After in 400_Component_____________________InstallationInstallationMinutes DIGITAL PATHWORKS for OpenVMS 60 000 60 000 26[3] PATHWORKS for OpenVMS (NetWare) 6 000 6 000 26[3] PrintServer Software for 33 000 33 000 20 OpenVMS Alpha Reliable Transaction Router 40 000 24 000 10 for OpenVMS Alpha (Server and Client) [3]DIGITAL_PATHWORKS_for_OpenVMS_and_PATHWORKS_for_OpenVMS______ (NetWare) share a common installation process. ________________________________________________________________ Table A-11 describes the SYSGEN parameters required if you install all of the components of the DIGITAL NAS Production Server 400. These SYSGEN parameters are provided in the file MODPARAMS_NAS_PROD_SERVER.DAT. Table A-11 DIGITAL NAS Production Server 400 System ___________Parameter_Requirements_________________________ Parameter___________Value_________Notes___________________ GBLPAGES 278 528[1] GBLPAGFIL 6346[1] GBLSECTIONS 1654[1] MAXPROCESSCNT 32 CLISYMTBL 500 During installation only. LOCKIDTBL 256 LOCKIDTBL_MAX 2048 [1]The_values_given_are_the_number_of_free_(unused)_pages_ and sections that must be available before installation. (continued on next page) A-22 Component Installation Prerequisites Table A-11 (Cont.) DIGITAL NAS Production Server 400 ___________________System_Parameter_Requirements__________ Parameter___________Value_________Notes___________________ RESHASHTBL 512 LOAD_SYS_IMAGES 7 WSMAX 19 594 Minimum. CHANNELCNT 315 Or any number larger than the largest FILLM used on the system (whichever is larger). MAXBUF 8192 If DECwindows Motif is loaded. PROCSECTCNT 64 SWPOUTPGCNT 512 VIRTUALPAGECNT 80 000 Or a number larger than largest PGFLQUOTA used on the system (whichever is larger). KSTACKPAGES 2 WINDOW_SYSTEM 1 PQL_DASTLM 20 PQL_MASTLM 100 PQL_DBIOLM 12 PQL_MBIOLM 100 PQL_MBYTLM 200 000 PQL_DDIOLM 20 PQL_MDIOLM 100 PQL_DENQLM 1000 PQL_MENQLM 300 PQL_MFILLM 200 PQL_MPGFLQUOTA 32 768 PQL_MPRCLM 10 (continued on next page) Component Installation Prerequisites A-23 Table A-11 (Cont.) DIGITAL NAS Production Server 400 ___________________System_Parameter_Requirements__________ Parameter___________Value_________Notes___________________ PQL_MWSDEFAULT 1024 PQL_MWSEXTENT 8192 PQL_MWSQUOTA 2048 NPAGEDYN 670 000 Minimum. PAGEDYN 289 000 Minimum. GH_RES_CODE 1024 GH_RSRVPGCNT 512 IMGREG_PAGES 2000 SCSNODE See the discussion in Section A.1.3. SCSSYSTEMID See the discussion in Section A.1.3. SYSMWCNT See the discussion in __________________________________Section_A.1.3.__________ A-24 Component Installation Prerequisites B ________________________________________________________________ Sample DIGITAL NAS Packages Installation This appendix gives a sample log from: o A DIGITAL NAS packages base kit installation using the POLYCENTER Software Installation (PCSI) Utility (Section B.1) B.1 Sample DIGITAL NAS Packages Base Kit Installation The following is a sample installation log from a DIGITAL NAS packages base kit installation (see Section 2.4): $ DEFINE PCSI$SOURCE DKA400:[NAS_CLIENT.KIT] $ $ PRODUCT INSTALL NASAXP/HELP The following product has been selected: DEC AXPVMS NASAXP V8.1-A Do you want to continue? [YES] Configuration phase starting ... You will be asked to choose options, if any, for each selected product and for any products that may be installed to satisfy software dependency requirements. DEC AXPVMS NASAXP V8.1-A: DIGITAL NAS Packages Version 8.1a for OpenVMS Alpha Systems. Do you want the defaults for all options? [YES] Questions or comments about DIGITAL NAS Packages Version 8.1a can be sent via Internet. If you have any questions or comments you would like to Sample DIGITAL NAS Packages Installation B-1 provide to the DIGITAL NAS Engineering group, we can be contacted via the following Internet address. nas_eng@zko.dec.com All obsolete DIGITAL NAS MODPARAMS files found on the system will be removed. Do you want to review the options? [NO] Execution phase starting ... The following product will be installed: DEC AXPVMS NASAXP V8.1-A Layered Product Portion done: 0%...10%...20%...30%...40%...50%...70%...100% The following product has been installed: DEC AXPVMS NASAXP V8.1-A Layered Product $ B-2 Sample DIGITAL NAS Packages Installation C ________________________________________________________________ DIGITAL NAS Reporter Output This appendix provides a sample report generated by the DIGITAL NAS Reporter. For more information, see Section 3.1. DIGITAL NAS Packages Installation Report 19-Jan-1998 14:26:57 DIGITAL NAS Version: Version 8.1 VMScluster Nodename: LONDON Operating System: VMS Operating System Version: V7.1 DECnet Version: VX.XX (DECnet Plus for OpenVMS) DECnet Node Fullname: LONDON:: DECnet Nodename: LONDON:: IP Host Name: london.england.com IP Address: 123.45.67.89 Hardware Architecture: Alpha Hardware Model: DEC 4000 Model 610 -------------------------------------------------------------------------------- License Report: The following DIGITAL NAS license(s) were found on your system: NET-APP-SUP-400 Digital NAS Production Server for OpenVMS Systems The NET-APP-SUP-400 license enables the following components: DIGITAL NAS Reporter Output C-1 ACMS-RT DEC ACMS Run Time DCPS-OPEN DECprint Supervisor for OpenVMS - Open DCPS-PLUS DECprint Supervisor for OpenVMS - Plus DQS DEC Distributed Queuing Service DVNETRTG DECnet for OpenVMS Extended Function DW-MOTIF DECwindows Motif DW-MOTIF-UI-CESKY DECwindows Motif/Cesky DW-MOTIF-UI-DEUTSCH DECwindows Motif/Deutsch DW-MOTIF-UI-ESPANOL DECwindows Motif/Espanol DW-MOTIF-UI-FRANCAIS DECwindows Motif/Francais DW-MOTIF-UI-ITALIANO DECwindows Motif/Italiano DW-MOTIF-UI-MAGYAR DECwindows Motif/Magyar DW-MOTIF-UI-POLSKI DECwindows Motif/Polski DW-MOTIF-UI-RUSSKIJ DECwindows Motif/Russkij DW-MOTIF-UI-SLOVENSKY DECwindows Motif/Slovensky DW-MOTIF-UI-SVENSKA DECwindows Motif/Svenska FORMS-RT DECforms Run-time System RMSJNL RMS Journaling RTR-CL Reliable Transaction Router Front End (client) RTR-SVR Reliable Transaction Router Back End (server) UCX DEC TCP/IP Services for OpenVMS UCX-IP-APPL DEC TCP/IP Services for OpenVMS UCX-IP-NFS DEC TCP/IP Services for OpenVMS UCX-IP-RT DEC TCP/IP Services for OpenVMS * VMSCLUSTER VMScluster Software VOLSHAD Volume Shadowing * A duplicate Product Authorization Key for this component has been detected. Since the right to use this component is included in your DIGITAL NAS License PAK, you do not need this additional PAK on this node. This PAK may represent a license that you can use elsewhere, or it may be an obsolete PAK that should be deleted. If you are unsure about the status of this PAK, contact Digital for additional information. If you are running in a VMScluster environment, you may wish to assign this PAK to another node (one without a DIGITAL NAS Package license) using the following command. LICENSE MODIFY product-name /INCLUDE=(node-name[,...]) C-2 DIGITAL NAS Reporter Output D ________________________________________________________________ System Management Documentation Table D-1 and Table D-2 list the system management documentation for the products that make up the DIGITAL NAS packages. They are arranged on the basis of the DIGITAL NAS services provided by these products; for example, Presentation Service or Printing Service. These manuals are provided on the OpenVMS Alpha Layered Product Online Documentation CD-ROM for viewing with the Bookreader. For information on general system management tasks, see your operating system documentation. Table D-1 lists documentation for the DIGITAL NAS services implemented by the DIGITAL NAS packages. Table D-1 System Management Documentation-DIGITAL NAS __________Services________________________________________ Presentation_Services_____________________________________ DECforms DECforms for OpenVMS Alpha Systems Installation Guide DECwindows Motif DECwindows Motif for OpenVMS Installation Guide DECwindows Motif for OpenVMS Applications Guide Managing DECwindows Motif for OpenVMS Systems Using DECwindows Motif for OpenVMS (continued on next page) System Management Documentation D-1 Table D-1 (Cont.) System Management Documentation-DIGITAL __________________NAS_Services____________________________ Printing_Services_________________________________________ DEC Distributed DEC Distributed Queuing Service for Queuing Service OpenVMS Systems Documentation Set DECprint Supervisor DECprint Supervisor (DCPS) for OpenVMS Alpha Software Installation Guide DECprint Supervisor (DCPS) for OpenVMS Alpha System Manager's Guide DECprint Supervisor (DCPS) for OpenVMS Alpha Installation Quick Reference Guide[1] PrintServer Software PrintServer Software for OpenVMS Installation Guide PrintServer Software for OpenVMS Management Guide __________________________________________________________ Communication_and_Control_Services________________________ ACMS ACMS Installation Guide ACMS Introduction ACMS Quick Reference Guide ACMS Managing Applications Reliable Transaction DEC RTR for OpenVMS Installation Router Guide DEC RTR for OpenVMS System Manager's Guide [1]This_document_is_available_only_in_hardcopy.___________ __________________________________________________________ Table D-2 lists documentation for the system interfaces implemented by the DIGITAL NAS packages. D-2 System Management Documentation Table D-2 System Management Documentation-System __________Interfaces______________________________________ Platform_Extensions_______________________________________ VMScluster Software VMScluster Systems for OpenVMS [1] for OpenVMS Alpha OpenVMS System Manager's Manual[1] OpenVMS System Management Utilities Reference Manual [1] Guidelines for VMScluster System Configurations[1] POSIX POSIX for OpenVMS Installation and System Management Guide[1] RMS Journaling RMS Journaling for OpenVMS Manual[1] Volume Shadowing Volume Shadowing for OpenVMS[1] __________________________________________________________ Network_Transport_________________________________________ DECnet DECnet for OpenVMS Guide to Networking[1] DECnet for OpenVMS Networking Manual[1] DECnet for OpenVMS Network Management Utilities[1] DECnet-Plus DECnet-Plus for OpenVMS Introduction and User's Guide DECnet-Plus for OpenVMS Installation and Configuration DECnet-Plus for OpenVMS Planning DECnet-Plus Network Management DECnet-Plus Network Control Language Reference Manual DECnet-Plus Problem Solving DECnet-Plus DECdns Management [1]_This_book_is_available_on_the_operating_system________ documentation CD-ROM. (continued on next page) System Management Documentation D-3 Table D-2 (Cont.) System Management Documentation-System __________________Interfaces______________________________ Network_Transport_________________________________________ DIGITAL TCP/IP DEC TCP/IP Services for OpenVMS Services and DIGITAL Installation and Configuration TCP/IP Client DIGITAL TCP/IP Services for OpenVMS Concepts and Planning DIGITAL TCP/IP Services for OpenVMS Management DIGITAL TCP/IP Services for OpenVMS Management Command Reference DIGITAL PATHWORKS PATHWORKS for OpenVMS Server for OpenVMS Installation and Upgrade Guide PATHWORKS Guide to Managing PATHWORKS Licenses DIGITAL PATHWORKS for OpenVMS Remote Boot Guide DIGITAL PATHWORKS for OpenVMS Server Administrator's Command Reference [2] DIGITAL PATHWORKS for OpenVMS Server Administrator's Guide DIGITAL PATHWORKS for OpenVMS Server Messages [2]This_document_is_available_only_in_hardcopy.___________ (continued on next page) D-4 System Management Documentation Table D-2 (Cont.) System Management Documentation-System __________________Interfaces______________________________ Network_Transport_________________________________________ PATHWORKS for PATHWORKS for OpenVMS Server OpenVMS (NetWare) Installation and Upgrade Guide PATHWORKS Guide to Managing PATHWORKS Licenses PATHWORKS for OpenVMS (NetWare) Planning and Setup Guide PATHWORKS for OpenVMS (NetWare) Server Administration Guide PATHWORKS for OpenVMS (NetWare) Printer Administration Guide PATHWORKS for OpenVMS (NetWare) NetWare Concepts[2] PATHWORKS for OpenVMS (NetWare) NetWare Trouble Shooting and System Messages[2] PATHWORKS for OpenVMS (NetWare) NetWare Utilities[2] PATHWORKS for PATHWORKS for OpenVMS (Macintosh) OpenVMS (Macintosh) Server Installation Guide PATHWORKS for OpenVMS (Macintosh) Introduction to the Appletalk Network System PATHWORKS for OpenVMS (Macintosh) Server Administrator's Guide PATHWORKS for OpenVMS (Macintosh) Server Administrator's Reference Manual [2]This_document_is_available_only_in_hardcopy.___________ __________________________________________________________ System Management Documentation D-5 ________________________________________________________________ Index A DECwindows Motif ___________________________ installation AUTOGEN considerations, 3-4 used to modify system language variants, 1-9 parameters, 2-15 Dependencies for installation of B__________________________ DIGITAL NAS packages Backing up the system disk, components, 3-5 2-3 DIGITAL NAS Base Server 200 components, 1-4 C description, 1-2 ___________________________ disk space requirements, CD-ROMs A-7 contents and directories installation time documentation, 1-11 requirements, A-7 Components of DIGITAL NAS DIGITAL NAS Client 150 packages components, 1-4 See DIGITAL NAS Packages description, 1-2 Cover letters disk space requirements, accessing, 1-11, 1-12 A-4 installation time D__________________________ requirements, A-4 DECnet DIGITAL NAS Client 250 executor parameters, A-3 components, 1-5 DECnet-Plus for OpenVMS description, 1-2 Alpha disk space requirements, component restrictions, A-11 3-3 installation time installation requirements, A-11 considerations, 3-3 DIGITAL NAS packages architecture description, 1-1 CD-ROMs Index-1 DIGITAL NAS packages DIGITAL NAS Production CD-ROMs (cont'd) Server 400 (cont'd) structure, 1-10 installation time components requirements, A-19 identified, 1-3 DIGITAL NAS Reporter, 3-1 installation, A-1 sample output, C-1 introduced, 1-2 DIGITAL NAS Server 300 description, 1-2 components, 1-6 directories description, 1-2 locations, 1-9 disk space requirements, installing A-15 base kit, 2-9 installation time components, 3-5 requirements, A-15 earlier version, 4-3 Disk space higher version, 4-1 required to install higher-level, 4-2 DIGITAL NAS packages lower level, 4-3 components, 2-2, A-1 license Documentation registering, 2-3 accessing PAK on CD-ROM, 1-10, 1-11 loading, 2-6 for system managers, D-1 replacing, 4-1 sample Group Table E license installation ___________________________ , B-1 Errors prerequisites in component installation disk space, A-4 reporting, A-3 executor parameters, in DIGITAL NAS packages A-3 installation hardware, 2-2 reporting, 2-17 OpenVMS tailoring Executor parameters classes, 2-3 for DECnet, A-3 sysgen parameters, A-4 sample installation, B-1 G__________________________ upgrading, 4-1 GBLPAGES DIGITAL NAS packages base calculating values, 2-13 kit GBLSECTIONS sample installation, B-1 calculating values, 2-13 DIGITAL NAS Production Server 400 components, 1-7 description, 1-3 disk space requirements, A-19 Index-2 Oracle Rdb H__________________________ installation Hardware considerations, 3-4 required to install Oracle Trace DIGITAL NAS, 2-2 installation considerations, 3-4 I__________________________ Order Installation for installation of DIGITAL NAS packages DIGITAL NAS packages prerequisites, 2-1 components, 3-5 reporting problems, P 2-17 ___________________________ DIGITAL NAS packages PCSI components See POLYCENTER Software dependencies, 3-5 Installation order, 3-5 POLYCENTER Software prerequisites, A-1 Installation (PCSI), reporting problems, 2-8 A-3 Postinstallation tasks, times, A-1 3-10 Installation guides Privileges accessing, 1-11, 1-12 required to install DIGITAL NAS packages L__________________________ components, A-1 License registration, 2-3 R__________________________ requirements, 2-6 Rdb M See Oracle Rdb ___________________________ Memory S__________________________ required to install Save sets DIGITAL NAS packages for DIGITAL NAS packages components, 2-2 components, 3-5 MODPARAMS_NAS*.DAT files, Services 2-12 for DIGITAL NAS O architecture, 1-1 ___________________________ SIPs OpenVMS tailoring classes, See System-integrated 2-3 products Operating system software required to install DIGITAL NAS, 2-2 Index-3 Software System-integrated products required to install (SIPs) DIGITAL NAS, 2-2 identified, 1-12 SPDs SPDs for, 1-12 accessing, 1-11, 1-12 SSAs T__________________________ accessing, 1-12 Tailoring classes System disk required, 2-3 backing up, 2-3 Time System parameters required to install checking, 2-12 DIGITAL NAS packages modifying, 2-11 components, A-1 using MODPARAMS_ NAS*.DAT files, U 2-12 ___________________________ with AUTOGEN, 2-15 Upgrading, 4-1 required to install DIGITAL NAS packages V__________________________ components, A-2 VMScluster license requirements, 2-6 VMSINSTAL, 2-10 Index-4