Software Product Description ___________________________________________________________________ PRODUCT NAME: Compaq OSAP/H1 Version 3.1 SPD 47.95.06 (Compaq OMNI Services for SINEC Automa- tion Protocols/SINEC H1 Services) DESCRIPTION Compaq OSAP is a network communication product. It provides a solu- tion to connect Compaq applications with shop floor devices based on Siemens® SINEC® H1 communication protocol. SINEC H1 services are also identified as PG communication services in Siemens literature. Siemens SINEC H1 has been recommended for connecting PLCs and host com- puters on large configurations. It has been specified on top of the ISO/OSI Transport Layer and it is based on Ethernet to improve effec- tiveness (through higher performance) and efficiency (through lower costs per connection). Compaq OSAP/H1 fully supports the SINEC H1 communication protocol. Features As the SINEC H1 communication protocol is defined on top of the ISO OSI Transport Layer, Compaq OSAP relies upon Compaq DECnet/OSI to com- plete the communication stack. For more information, refer to the DEC- net/OSI Software Product Description (SPD 41.92.xx). Because of the functional compatibility between Siemens SINEC AP and MMS (Manufacturing Messaging Services), ISO International Standard 9506, Parts 1 and 2, Compaq OSAP is integrated with the software architec- ture of the Compaq OMNI API product to supply the Application Program- ming Interface (API). For more information, refer to the Compaq OMNI API Software Product Description (SPD 47.88.xx). COMPAQ April 2000 Compaq OSAP also provides Device Access Software (DAS) for connect- ing Siemens SINEC H1 devices for BASEstar Open Server systems. For fur- ther information, refer to the Compaq OMNI API Software Product De- scription (SPD 47.82.xx). Components o Compaq OSAP/H1 Services This component adds support for SINEC H1 functionality via the Compaq OMNI API. Supported services are listed at the end of this Software Product De- scription and are divided into the following categories: - Environmental Management - Messages - Device Management - Variable Access o Configuration and Management Facilities Compaq OSAP/H1 uses the Compaq OMNI API facility ODSCL. On OpenVMS platforms, the following Compaq OMNI API facilities are sup- ported: - ODF (OMNI Definition Facility) - OMNIView o Support for the Device Access Services of BASEstar Open o Installation Verification Procedure (IVP) The Compaq OSAP IVP performs a series of tests to verify proper in- stallation. 2 Documentation Compaq OSAP includes the following documentation: o A platform-specific Network Manager's and Programmer's Guide pro- vides an overview of SINEC H1 and SINEC AP (see the Compaq OSAP/AP Software Product Description-SPD 47.96.07) concepts and terminol- ogy. It includes a description of the services that are available through Compaq OMNI API and features of Compaq OSAP. It also de- scribes how to use the Compaq OMNI API utility ODSCL. o A platform-specific Installation Guide that explains how to pre- pare for installation, how to install the product, and what to do after Compaq OSAP is installed. INSTALLATION Before attempting to install the software, the customer must have all pre-requisite hardware and software. Compaq Computer Corporation rec- ommends that a customer's first purchase include Compaq Installation Services. Connectivity to all other nodes within the network is the responsi- bility of the customer. SUPPORTED VERSIONS This SPD covers the following versions of the Compaq OSAP product: o Compaq OSAP/H1 for OpenVMS VAX o Compaq OSAP/H1 for OpenVMS Alpha o Compaq OSAP/H1 for Tru64 Unix 3 ORDERING INFORMATION Compaq OSAP/H1 for OpenVMS VAX: Software Licenses (unlimited use): QL-5BQ**-** Software Documentation: QA-5BP**-** Software Product Services: QT-5BR**-** Compaq OSAP/H1 for OpenVMS Alpha: Software Licenses (unlimited use): QL-2XWA*-** Software Documentation: QA-2XVAA-GZ Software Product Services: QT-2XWA*-** Compaq OSAP/H1 for Tru64 Unix: The Compaq OSAP/AP product kit is included in the BASEstar Open Server for Tru64 Unix Consolidated Software Distribution: Software Media: QA-5SRAA-H8 Software Licenses (unlimited use): QL-0Z7A*-** Software Documentation: QA-0Z7A*-GZ Software Product Services: QT-0Z7A*-** * Denotes variant fields. For additional information on available li- censes, services, and media refer to the appropriate price book. SOFTWARE LICENSING This software is furnished under the licensing provisions of Compaq Computer Corporation's Standard Terms and Conditions. For more infor- mation about Compaq licensing terms and policies, contact your local Compaq office. License Management Facility Support: This layered product supports the Compaq License Management Facility. Two types of license are available: o "Unlimited system use" license-available for a processor 4 o "Concurrent use" license-available for a device connection. SOFTWARE PRODUCT SERVICES A variety of service options are available from Compaq. For more in- formation, contact your local Compaq office. SOFTWARE WARRANTY This software is provided by Compaq with a 90 day conformance warranty in accordance with the Compaq warranty terms applicable to the license purchase. Warranty Limitations The SINEC H1 services supported by Compaq OSAP/H1 are listed in Ap- pendix A of the System Warranty Addendum of this SPD. HARDWARE REQUIREMENTS Processors Supported: o Alpha processors supporting either: - OpenVMS Alpha Version 6.1 to 7.1, 7.2 - Tru64 Unix Version 3.2 or 4.0 o VAX processors supporting: - OpenVMS VAX Version 6.1 to 7.1, 7.2 DISK SPACE REQUIREMENTS OpenVMS (VAX/Alpha): o 26 Mb (installation) o 10 Mb (permanent use) 5 Tru64 Unix: o 26 Mb (installation) o 10 Mb (permanent use) Note: A configuration with at least 16 Mb of memory is recommended. These values refer to the disk space required on the system disk. The sizes are approximate; actual sizes may vary depending on the user's system environment, configuration, and software options. SOFTWARE REQUIREMENTS YEAR 2000 READY YEAR 2000 READY This product is Year 2000 Ready. Year 2000 Ready is defined: "Year 2000 Ready" products are defined by Compaq as products capable of accurately processing, providing, and/or receiving date data from, into and between the twentieth and the twenty-first centuries, and the years 1999 and 2000, including leap year calculations, when used in accordance with the associated product documentation and pro- vided that all hardware, firmware and software used in combination with such products properly exchange accurate date data with the products. Compaq OSAP/H1 for OpenVMS Alpha: o OpenVMS Version 6.1 to 7.1, 7.2 o DECnet/OSI for OpenVMS Alpha Version 6.3 to 7.1, 7.2 o Either: - Compaq OMNI API for OpenVMS Alpha V3.21, or - BASEstar Open Server for OpenVMS Alpha V3.2 o ORACLE Rdb Version 6.0 or 6.1[1] ____________________ Only necessary if you are using Compaq OMNI API with the ODF component. 6 o OpenVMS DECwindows Motif Version 1.2[2] Compaq OSAP/H1 for OpenVMS VAX: o OpenVMS VAX Version 6.1 to 7.1, 7.2 o DECnet/OSI for OpenVMS VAX Version 6.3 to 7.1, 7.2 o Either: - Compaq OMNI API for OpenVMS VAX V3.1, or - BASEstar Open Server for OpenVMS VAX V3.2 o ORACLE Rdb Version 5.1[1] o OpenVMS DECwindows Motif Version 1.2[2] Compaq OSAP/H1 for Tru64 Unix: o Tru64 Unix Version 3.2 or 4.0 o DECnet/OSI for Tru64 Unix Version 3.2 to 4.0 o Either: - Compaq OMNI API for Tru64 Unix V3.1 - BASEstar Open Server for Tru64 Unix V3.2 GROWTH CONSIDERATIONS The minimum hardware/software requirements for any future version of this product may be different from the requirements for the current version. DISTRIBUTION MEDIA This product is available on CD-ROM for the supported operating sys- tem, and on TK50 media for OpenVMS VAX. ____________________ Only necessary if you are using Compaq OMNI API with the OMNIView component. 7 ServiceAPPENDIX A - SINEC H1 Functionality Cross Reference Tables The tables that follow list the Conformance Building Block (CBB) services and parameters that are supported by Com- paq OSAP/H1 Version 3.1. They are compared to the services provided within the first version. The level of support de- pends upon the level of functionality provided by the target Siemens communication processors. ___________________________________________________________________ Table_1:_Siemens_SINEC_H1_CBB_Services_Cross_Reference_Table_______ Compaq OSAP/H1 ________________________Version_3.1_____________CP535______________ ___________________________________Environment_Management__________ Initiate B B Conclude B B Abort B B Cancel C N ___________________________________________________________________ ________________________________________VMD_Support________________ Status C S ___________________________________________________________________ __________________________________Variable_Access_Services_________ Read B B Write B B InformationReport B B 8 Tablec1s(Cont.):_Siemens_SINEC_H1_CBB_Services_Cross_Reference_____ _________________Table_____________________________________________ Compaq OSAP/H1 ________________________Version_3.1_____________CP535______________ _________________________________Domain_Management_Services________ InitiateDownload C S Sequence DownloadSegment C S TerminateDownload C S Sequence InitiateUpload C S Sequence UploadSegment C S TerminateUpload C S Sequence ___________________________________________________________________ ________________________________Program_Invocation_Services________ Start C S Stop C S ___________________________________________________________________ __________________________________Serial_Transfer_Services_________ Send____________________B_______________________B__________________ Where the following symbols apply: B = Client and Server C = Client only S = Server only 9 Tablec2s(Cont.):_Siemens_SINEC_H1_CBB_Parameters_Cross_Reference___ N = Not supportedle ___________________________________________________________________ Table_2:_Siemens_SINEC_H1_CBB_Parameters_Cross_Reference_Table_____ Parameters______________Compaq_OSAP/H1_Version_3.1_________________ STR1 TRUE STR2 TRUE NEST 10 VNAM FALSE VADR TRUE VALT FALSE VSCA FALSE TPY FALSE VLIS FALSE REAL FALSE AKEC FALSE CEI_____________________FALSE______________________________________ Supported Siemens Communication Processors (CP) are: o CP535 for Simatic® S5 PLC family o CP143 for Simadyn® S5 PLC family o CP1430 for Simatic® S5 PLC family o CSH1 for Simadyn® PLC family 10 © 2000 Compaq Computer Corporation. [TM] The Compaq logo, Alpha, AXP, BASEstar, Bookreader, Compaq OMNI, Compaq OSAP, DECstation, DECsystem, Compaq DECnet, Compaq, MicroVAX, TK, VAX, VAXstation, OpenVMS are trademarks of Compaq Computer Corporation. All other trademarks and registered trademarks are the property of their respective holders. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. ® Intel is a trademark of Intel Corporation. ® Motif is a trademark of the Open Software Foundation, Inc. ® MS-DOS, Microsoft and Windows 95 are trademarks of Microsoft Corporation. [TM] Windows NT is a registered trademark of Microsoft Corpora- tion. ® UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Ltd. ® ORACLE is a trademark of Oracle Corporation. 11