HP Software Product Description ___________________________________________________________________ PRODUCT NAME: Media Robot Utility, Version 1.8 SPD 64.44.08 DESCRIPTION Media Robot Utility (MRU) is a multiplatform software utility that pro- vides direct robotic control for HP DLT (Digital Linear Tape), Super DLT and 4mm (DAT) loaders, the TL8nn libraries, and the TKZ loaders. This product provides the ability for the user to load a cartridge from a selected robot slot into a specified robot drive and unload the car- tridge from the drive. It also provides the user the ability to move the cartridge from slot/drive/port to slot/drive/port if the hardware device qualifies the move. The commands qualified are: o Load-Moves a cartridge from slot to drive. o Unload-Moves a cartridge from drive to slot. o Inject-Moves a cartridge from port to slot. o Eject-Moves a cartridge from slot to port. o Move-Moves a cartridge from slot/drive/port to slot/drive/port as long as the hardware device qualifies the move. o Show-Displays information. o Ready-Allows opening the import mechanism door on member robots of the TL82x family of libraries. o Lock/Unlock-Prevents or allows media removal on robots that qual- ifies this feature. o Help-Displays information on the commands. January 2005 o Position-Moves the changer mechanism to an element. o Find Cartridge-Locates cartridges by external barcode label. o Initialize-Inventories the robot. o Home-Returns cartridge to previous location. o Reserve-Reserves the device for exclusive use on the host. o Release-Releases the device from exclusive use on the host. MRU software provides a command line interface, graphic user inter- face, and application programming interface for Windows XP, HP[TM] Tru64 UNIX[R], and OpenVMS[TM] operating systems. Hardware Requirements MRU is compatible with the following libraries and loaders: o Automated Tape Libraries as listed below. o HP SCSI Loaders: ALL o HP DAT Loaders: All o HP TKZ61, TKZ62, and TKZ64 o ESL E-Series Libraries o ESL9000 Series Libraries o MSL5000 Series Libraries o SSL2000 Series Libraries o TL891DLX Library The following table shows controller software and firmware require- ments: HSJnn HSJ30 & HSJ40 - v2.5 HSOF firmware or later re- quired 2 HSJ50 - v5.1 HSOF firmware or later required HSDnn HSD30 - v2.5 HSOF firmware or later required HSD50 - v5.1 HSOF firmware or later required HSZnn HSZ40 v3.1 HSOF firmware or later required HSZ50 v5.1 HSOF firmware or later required HSZ70 v7.0 HSOF firmware or later required MDR+ HP Modular Data Router - firmware v1170 or later required NSR+ M2402 Network Storage Router - firmware v4.02aw or later required ___________________________________________________________________ +The MDR and NSR is supported on OpenVMS Alpha 7.3-2 and above The following list shows tape loader and library software and firmware requirements: ESL630e version 3.2 or later firmware required ESL9198DLX version V1.42 or later firmware required ESL9198SL version V1.42 or later firmware required ESL9322S2 version V3.20 or later firmware required ESL9322L2 version V3.20 or later firmware required ESL9326D version V1.42 or later firmware required ESL9326DX version V1.42 or later firmware required ESL9326S2 version V1.42 or later firmware required ESL9595SL version V3.20 or later firmware required ESL9595S2 version V3.20 or later firmware required ESL9595L2 version V3.20 or later firmware required SSL2020 version 4.09 firmware required MSL5026DLX version V4.04 firmware required MSL5026SL version 0221 firmware required MSL5026S2 version 4.04 firmware required MSL5026S2-FC version 4.04 firmware required 3 MSL6030L2 version 4.14 firmware required TLZ6L 4BQ or later firmware required TLZ7L 4BQ or later firmware required TLZ9L version A020 or later required TSL10000 version 5.10 firmware required TZ857 version 4318 or later required TZ867 version 4318 or later required TZ877 version 9A28 or later required TZ875 version 9514 or later required TZ885 version CC1E TZ887 version CC1E TL810 version 1.20 or later firmware required TL812 version 1.20 or later firmware required TL820 version 4C or later firmware required TL822 version 4C or later firmware required TL826 version 4G or later firmware required TL891 version V4.09 or later firmware required TL891DLX version V5.19 or later firmware required TL892 version V4.09 or later firmware required TL893 version 5A required TL894 version 1.25 required TL895 version 2.20 required TL896 version 5A required TKZ61+ version 0613 or later firmware required on hard- ware revision B02 or greater TKZ62+ version 0613 or later firmware required on hard- ware revision B02 or greater 2T-TKZ64+ version 0613 or later firmware required on hard- ware revision A01 or greater ___________________________________________________________________ +Sometimes may not work with HSD30 4 For MRU to operate the library or loader must also be qualified by the operating system. For Windows XP systems, MRU software is compatible with libraries and loaders connected by the KZPAA and KZPSA adapters, and other PCI based, SCSI-2 compliant adapters using the AIC78xx bus driver. For Windows 2000 and Windows XP sytems, MRU software is compatible with libraries and loaders connected by the KZPBA and other PCI based, SCSI- 2 compliant adapters using the AIC78xx bus driver. Unsupported Connections Connections via the HSCnn, HSD05, HSD10, and AHA1740 are not quali- fied. Software Requirements OpenVMS software requirements for the command line interface: OpenVMS VAX: V7.3 (SPD 25.01.XX) OpenVMS Alpha: V7.3-2 (SPD 25.01.XX) V8.2 (SPD 82.35.XX) OpenVMS I64: V8.2 (SPD 82.35.XX) Refer to the appropriate OpenVMS Operating System Software Product De- scription (SPD) for additional details. OpenVMS software requirements for the Motif graphic user interface and application programming interface: o OpenVMS VAX or Alpha or I64 operating system version 7.3 on VAX or 7.3-2 and 8.2 on Alpha or 8.2 on I64 o Motif version 1.2.5 or later on VMS Tru64 UNIX software requirements for the command line interface and application programming interface: o Tru64 UNIX version 4.0F and 4.0G o Tru64 UNIX versions 5.1, 5.1A and 5.1B 5 o SCSI CAM Layered Components for Tru64 UNIX Tru64 UNIX software requirements for graphic user interface: o Tru64 UNIX version 4.0F and 4.0G o Motif version 1.2.3 This software is required to support the robotic media-handling de- vices on Tru64 UNIX platforms. See the SCSI CAM Layered Components for Tru64 UNIX SPD (SPD 50.68.xx) for details. MRU software runs under Windows 2000 and Windows XP operating systems. Software Licensing This software is furnished only under a license. For more information about HP's licensing terms and policies, contact your local HP office. The license for MRU is granted for use on one specified system. The MRU License grants the rights to unlimited use of the SCSI CAM Lay- ered Components for Tru64 UNIX Media Changer Device Driver (SPD 50.68.xx). Distribution Media Media Robot Utility is available on CD ROM. The media contains the Open- VMS (both VAX and Alpha), Tru64 UNIX, and Windows 2000/Windows XP ex- ecutables and documentation. The Media Robot Utility CD ROM also contains the SCSI CAM Layered Com- ponents for Tru64 UNIX systems, versions 4.0F and 4.0G and Tru64 UNIX systems, versions 5.1, 5.1A and 5.1B. Ordering Information The following table shows part numbers for ordering product: 6 _________________Order_____________________________________________ Offering_________Number____________________________________________ Software li- QM-50TAA- cense AA Software li- QB-50TAA- cense with SA Media and Documentation______________________________________________________ SOFTWARE PRODUCT SERVICES A variety of service options are available from HP. For more infor- mation, contact your local HP account representative or distributor. Information is also available on www.hp.com/hps/software. SOFTWARE WARRANTY This software is provided by HP with a ninety-day conformance warranty in accordance with the HP warranty terms applicable to the license pur- chase. © Copyright 2005 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for pos- session, use or copying. Consistent with FAR 12.211 and 12.212, Com- mercial Computer Software, Computer Software Documentation, and Tech- nical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional war- ranty. HP shall not be liable for technical or editorial errors or omis- sions contained herein. 7