Compaq ACMS for OpenVMS
Remote Systems Management Guide

8.51 ACMSMGMT_STOP_TRACE_MONITOR_1

This procedure requests that the Remote Manager stop the ACMS$TRACE_MONITOR process. The ACMS$TRACE_MONITOR process is an intermediate process used by the Remote Manager to communicate with ACMS run-time processes to enable and disable collections.

Format

int *acmsmgmt_stop_trace_monitor_1(sub_id_struct *sub_rec,CLIENT *cl)

Parameters

sub_rec

Type: Sub_id_struct

Access: Read

Mechanism: By reference

Usage: Structure that contains the following client authorization information.

client_id

Type: Integer

Access: Read

Mechanism: By value

Usage: If explicit authentication is being used, a valid client ID must be provided. If the value for client_id is 0, proxy access is used. Client_id is obtained by calling the acms$mgmt_get_creds procedure.

cl

Type: CLIENT *

Access: Read

Mechanism: By value

Usage: Pointer to an RPC client handle previously obtained by calling the RPC routine CLNT_CREATE.

Return Value

Type: Integer

Access: Write

Mechanism: By reference

Usage: Pointer to status value returned. If the value is NULL or MGMT_SUCCESS, the RPC has succeeded. If the value is neither NULL nor MGMT_SUCCESS, the call failed and the value pointed to is the reason for failure.

Description

This procedure requests that the Remote Manager stop the ACMS$TRACE_MONITOR process on the target node. The ACMS$TRACE_MONITOR process is an intermediate process used by the Remote Manager to communicate with ACMS run-time processes to enable and disable collections.
In general, external entities do not require a startup and shutdown request of the trace monitor process. The Remote Manager starts the trace monitor during process initialization and stops it during process shutdown. Additionally, the Remote Manager starts the trace monitor anytime it is needed (if it is not already started). Once started, the trace monitor continues to run until the Remote Manager shuts down.
After issuing the stop command to the trace monitor, the Remote Manager waits for a period of up to trace_start_wait_time (a Parameter table parameter that is dynamic and expressed in seconds). If the trace monitor fails to stop during that period, the Remote Manager returns an error to the caller.

Example


int stop_trace(int client_id,CLIENT cl) { int status; static struct sub_id_struct sub_rec; sub_rec.client_id = client_id; status = acmsmgmt_stop_trace_monitor_1(&sub_rec,cl); if (!status) { printf("\nShutdown of Trace Monitor has failed"); return(MGMT_FAIL); } if (status != MGMT_SUCCESS) { printf("\nShutdown of Trace Monitor has failed with return code %d", status); free(status); return(MGMT_FAIL); } printf("\nTrace Monitor has been stopped "); free(status); return(MGMT_SUCCESS); }

int stop_trace(int client_id,CLIENT *cl) 
{ 
   int *status; 
   static struct sub_id_struct sub_rec; 
 
   sub_rec.client_id = client_id; 
 
   status = acmsmgmt_stop_trace_monitor_1(&sub_rec,cl); 
 
   if (!status) { 
      printf("\nShutdown of Trace Monitor has failed"); 
      return(MGMT_FAIL); 
   } 
 
   if (*status != MGMT_SUCCESS) { 
      printf("\nShutdown of Trace Monitor has failed with return code %d", 
             *status); 
        free(status); 
      return(MGMT_FAIL); 
   } 
 
   printf("\nTrace Monitor has been stopped "); 
     free(status); 
   return(MGMT_SUCCESS); 
}

In the preceding example, the ACMSMGMT_STOP_TRACE_MONITOR_1 procedure is called to stop the ACMS$TRACE_MON process on the target node. If the call succeeds, the process is stopped. Otherwise, any error messages associated with the failure are displayed. The example in Section 6.4.1 shows how to declare and initialize the input arguments to this procedure.

8.52 ACMSMGMT_STOP_TSC_1

This procedure requests that the Remote Manager stop a Terminal Subsystem Controller (TSC) on the same node on which the Remote Manager is running.

Format

cmd_output_rec *acmsmgmt_stop_tsc_1(sub_id_struct *sub_rec,CLIENT *cl)

Parameters

sub_rec

Type: Sub_id_struct

Access: Read

Mechanism: By reference

Usage: Structure that contains the following client authorization information.

client_id

Type: Integer

Access: Read

Mechanism: By value

Usage: If explicit authentication is being used, a valid client ID must be provided. If the value for client_id is 0, proxy access is used. Client_id is obtained by calling the acms$mgmt_get_creds procedure.

cl

Type: CLIENT *

Access: Read

Mechanism: By value

Usage: Pointer to an RPC client handle previously obtained by calling the RPC routine CLNT_CREATE.

Return Value

Type: Cmd_output_rec

Access: Write

Mechanism: By reference

Usage: Pointer to a union. The union contains either a failure code or a structure of type cmd_rec, which points to a linked list containing status messages. The following are the contents of this union:

status

Type: Integer

Access: Write

Mechanism: By value

Usage: Failure return code.

rc

Type: Integer

Access: Write

Mechanism: By value

Usage: Failure return code.

data, data_warn

Type: Cmd_rec

Access: Write

Mechanism: By value

Usage: Structure containing the first node in a linked list of status messages (type dcl_list). The following are the contents of this structure:

cmd_output

Type: Dcl_list

Access: Write

Mechanism: By reference

Usage: Pointer to a linked list of records containing status messages related to the failure of any updates. This structure contains the following fields:

dcl_msg

Type: Null-terminated string

Access: Write

Mechanism: By reference

Usage: The status message.

pNext

Type: Dcl_list

Access: Write

Mechanism: By reference

Usage: Pointer to the next node in the linked list.

Description

This procedure requests to stop an ACMS TSC on the same node on which the Remote Manager is running.
This call executes synchronously. It does not return to the caller until the attempt to stop the TSC is complete. Any messages associated with an unsuccessful start of the TSC are returned in the cmd_output linked list.
The data and data_warn structures contain identical data. If the operation fails, the status field of both structure will be MGMT_WARN; in this case, use the data_warn structure to fetch the status messages from the cmd_output linked list.
If the operation is successful, the status field of both structures will be MGMT_SUCCESS. No status messages are associated with a successful call.
If the status field contains MGMT_FAIL, the call failed. No status messages are returned; instead, the reason for the failure is contained in the rc field.

Example


int stop_tsc(int client_id,CLIENT cl) { dcl_link nl; static struct sub_id_struct sub_rec; cmd_output_rec *ret_struct; sub_rec.client_id = client_id; ret_struct = acmsmgmt_stop_tsc_1(&sub_rec,cl); if (!ret_struct) { printf("\n Call to stop TSC failed"); return(MGMT_FAIL); } if (ret_struct->status != MGMT_SUCCESS) { if (ret_struct->status != MGMT_WARN) { printf("\nCall to stop ACMS TSC failed with status %d", ret_struct->status); xdr_free(xdr_cmd_output_rec, ret_struct); free(ret_struct); return(MGMT_FAIL); } printf("\n Call to stop ACMS TSC completed with warnings or errors"); for (nl = ret_struct->cmd_output_rec_u.data.cmd_output; nl != NULL; nl = nl->pNext) printf("\n %s",nl->dcl_msg); xdr_free(xdr_cmd_output_rec, ret_struct); free(ret_struct); return(MGMT_FAIL); } else { printf("\nCall to stop ACMS TSC was executed"); for (nl = ret_struct->cmd_output_rec_u.data.cmd_output; nl != NULL; nl = nl->pNext) printf("\n %s",nl->dcl_msg); } xdr_free(xdr_cmd_output_rec, ret_struct); free(ret_struct); return(0); }

int stop_tsc(int client_id,CLIENT *cl) 
{ 
   dcl_link    *nl; 
   static struct sub_id_struct sub_rec; 
   cmd_output_rec *ret_struct; 
 
   sub_rec.client_id = client_id; 
 
   ret_struct = acmsmgmt_stop_tsc_1(&sub_rec,cl); 
 
   if (!ret_struct) { 
      printf("\n Call to stop TSC failed"); 
      return(MGMT_FAIL); 
   } 
 
   if (ret_struct->status != MGMT_SUCCESS) { 
 
       if (ret_struct->status != MGMT_WARN) { 
          printf("\nCall to stop ACMS TSC failed with status %d", 
                  ret_struct->status); 
             xdr_free(xdr_cmd_output_rec, ret_struct); 
             free(ret_struct); 
          return(MGMT_FAIL); 
   } 
 
        printf("\n Call to stop ACMS TSC completed with warnings or errors"); 
 
        for (nl = ret_struct->cmd_output_rec_u.data.cmd_output; nl != NULL; 
             nl = nl->pNext) 
            printf("\n %s",nl->dcl_msg); 
              xdr_free(xdr_cmd_output_rec, ret_struct); 
              free(ret_struct); 
            return(MGMT_FAIL); 
   } 
 
   else { 
        printf("\nCall to stop ACMS TSC was executed"); 
        for (nl = ret_struct->cmd_output_rec_u.data.cmd_output; nl != NULL; 
             nl = nl->pNext) 
     printf("\n %s",nl->dcl_msg); 
   } 
        xdr_free(xdr_cmd_output_rec, ret_struct); 
        free(ret_struct); 
 return(0); 
}

In the preceding example, the ACMSMGMT_STOP_TSC_1 procedure is called to stop the terminal subsystem on the target node. If the call succeeds, the terminal subsystem is stopped on the target node. Otherwise, any error messages associated with the failure are displayed. The example in Section 6.4.1 shows how to declare and initialize the input arguments to this procedure.

Chapter 9
Remote Manager Reference Tables

This chapter contains information about data types that the Remote Manager implements and the reference tables for the Remote Manager. The Remote Manager reference tables include the following:

ACC table
Collection table
CP table
Error Filter table
EXC table
Interfaces table
Manager status table
Parameter table
QTI table
Server table
Task Group table
Trap table
TSC table
Users table

Note

The following sections describe the records and fields in each Remote Manager reference table. Many of these tables now contain a subset of fields intended solely for use on or by systems running ACMS Version 4.4 or higher. These fields are denoted with the double dagger (++) symbol within each table listing.

9.1 Data Types

The ACMS Remote Manager implements the following data types:

Gauge and Min Gauge
Gauge fields are structures containing the following fields:
- current_value
  The value of the object when last observed. Represents the most current known value.
- max_value or min_value
  The largest or smallest observed value for the object.
- time_max_seen or time_min_seen
  The date and time the max_value or min_value was set.
Integer
Integer fields are 32-bit signed integers.
State 1
State 1 fields are integers with two possible values:
- MGMT$K_STATE_DISABLED
- MGMT$K_STATE_ENABLED
State 2
State 2 fields are integers with the following possible values:
- MGMT$K_STATE_INITED
- MGMT$K_STATE_INITING
- MGMT$K_STATE_LOAD_DONE
- MGMT$K_STATE_LOADING
- MGMT$K_STATE_STARTED
- MGMT$K_STATE_STARTING
- MGMT$K_STATE_STOPPED
- MGMT$K_STATE_STOPPING
String
String fields are null-terminated ASCII strings.
Time
Time fields are stored internally in OpenVMS internal time format and are generally displayed as DD-MMM-YYY HH:MM:SS.hh. When present in a record supplied by the Remote Manager (that is, from either an RPC or SNMP call, or in a file), time is always an ASCII value in the default OpenVMS format (DD-MMM-YYYY HH:MM:SS.hh) and is stored as a null-terminated string.

9.2 ACC Table

The ACC table contains a single entry for ACC management information.

Table 9-1 ACC Table
Class Field Data Type SNMP Access RPC Access Dynamic

ID record_state integer R R

ID id_coll_state integer R R

ID process_name string R R

ID pid integer R R

ID username_active string R R

ID username_stored string R R

ID start_time time R R

ID end_time time R R

ID acms_version string R R

CONFIG config_coll_state integer R R

CONFIG acms_state integer RW R D

CONFIG acc_priority_active integer R R

CONFIG acc_priority_stored integer RW RW

CONFIG max_appl_active integer R R

CONFIG max_appl_stored integer RW RW

CONFIG mss_maxobj_active integer R R

CONFIG mss_maxobj_stored integer RW RW

CONFIG mss_maxbuf_active integer R R

CONFIG mss_maxbuf_stored integer RW RW

CONFIG mss_poolsize_active integer R R

CONFIG mss_poolsize_stored integer RW RW

CONFIG mss_process_pool_active integer R R

CONFIG mss_process_pool_stored integer RW RW

CONFIG mss_net_retry_timer_active integer RW RW D

CONFIG mss_net_retry_timer_stored integer RW RW

CONFIG audit_state integer RW RW D

CONFIG username_default_active integer RW RW D

CONFIG username_default_stored integer RW RW

CONFIG node_name_active integer R R

CONFIG node_name_stored integer RW RW

CONFIG ws_poolsize_active integer R R

CONFIG ws_poolsize_stored integer RW RW

CONFIG wsc_poolsize_active integer R R

CONFIG wsc_poolsize_stored integer RW RW

CONFIG tws_poolsize_active integer R R

CONFIG tws_poolsize_stored integer RW RW

CONFIG twsc_poolsize_active integer R R

CONFIG twsc_poolsize_stored integer RW RW

CONFIG astlm_active++ integer R R

CONFIG astlm_stored++ integer RW RW

CONFIG biolm_active++ integer R R

CONFIG biolm_stored++ integer RW RW

CONFIG bytlm_active++ integer R R

CONFIG bytlm_stored++ integer RW RW

CONFIG diolm_active++ integer R R

CONFIG diolm_stored++ integer RW RW

CONFIG enqlm_active++ integer R R

CONFIG enqlm_stored++ integer RW RW

CONFIG fillm_active++ integer R R

CONFIG fillm_stored++ integer RW RW

CONFIG pgflquota_active++ integer R R

CONFIG pgflquota_stored++ integer RW RW

CONFIG tqelm_active++ integer R R

CONFIG tqelm_stored++ integer RW RW

CONFIG wsdefault_active++ integer R R

CONFIG wsdefault_stored++ integer RW RW

CONFIG wsextent_active++ integer R R

CONFIG wsextent_stored++ integer RW RW

CONFIG wsquota_active++ integer R R

CONFIG wsquota_stored++ integer RW RW

CONFIG channelcnt_active++ integer R R

CONFIG channelcnt_stored++ integer RW RW

CONFIG gblsections_active++ integer R R

CONFIG gblsections_stored++ integer RW RW

CONFIG gblpages_active++ integer R R

CONFIG gblpages_stored++ integer RW RW

CONFIG gblpagfil_active++ integer R R

CONFIG gblpagfil_stored++ integer RW RW

RUNTIME runtime_coll_state integer R R

RUNTIME current_appls gauge R R

RUNTIME current_users gauge R R

RUNTIME current_local_users gauge R R

RUNTIME current_remote_users gauge R R

RUNTIME appl_starts integer R R

RUNTIME decnet_object integer R R

RUNTIME astlm_current++ gauge R R

RUNTIME biolm_current++ gauge R R

RUNTIME bytlm_current++ gauge R R

RUNTIME diolm_current++ gauge R R

RUNTIME enqlm_current++ gauge R R

RUNTIME fillm_current++ gauge R R

RUNTIME pgflquota_current++ gauge R R

RUNTIME tqelm_current++ gauge R R

RUNTIME wssize_current++ gauge R R

RUNTIME channelcnt_current++ gauge R R

POOL pool_coll_state integer R R

POOL mss_shared_total integer R R

POOL mss_shared_free min gauge R R

POOL mss_shared_largest min gauge R R

POOL mss_shared_failures integer R R

POOL mss_shared_garbage integer R R

POOL mss_process_total integer R R

POOL mss_process_free min gauge R R

POOL mss_process_largest min gauge R R

POOL mss_process_failures integer R R

POOL mss_process_garbage integer R R

POOL mss_objects gauge R R

POOL mss_msgs_1-1024++ integer R R

POOL mss_msgs_1025-2048++ integer R R

POOL mss_msgs_2049-4096++ integer R R

POOL mss_msgs_4097-8192++ integer R R

POOL mss_msgs_8193-16384++ integer R R

POOL mss_msgs_16385-32768++ integer R R

POOL mss_msgs_32769-65636++ integer R R

POOL mss_msg_count_resets++ gauge R R

POOL tws_poolsize_total++ gauge R R

POOL tws_pool_large_used++ gauge R R

POOL tws_pool_min_free++ gauge R R

POOL twsc_poolsize_total++ gauge R R

POOL twsc_pool_large_used++ gauge R R

POOL twsc_pool_min_free++ gauge R R

POOL ws_pool_large_used++ gauge R R

POOL ws_pool_min_free++ gauge R R

POOL wsc_pool_large_used++ gauge R R

POOL wsc_pool_min_free++ gauge R R

ERROR err_coll_state++ integer R R

ERROR err_count++ integer R R

ERROR last_err_msg++ string R R

ERROR time_of_last_error++ time R R

**Table 9-1 ACC Table**
Class	Field	Data Type	SNMP Access	RPC Access	Dynamic
ID	record_state	integer	R	R
ID	id_coll_state	integer	R	R
ID	process_name	string	R	R
ID	pid	integer	R	R
ID	username_active	string	R	R
ID	username_stored	string	R	R
ID	start_time	time	R	R
ID	end_time	time	R	R
ID	acms_version	string	R	R
CONFIG	config_coll_state	integer	R	R
CONFIG	acms_state	integer	RW	R	D
CONFIG	acc_priority_active	integer	R	R
CONFIG	acc_priority_stored	integer	RW	RW
CONFIG	max_appl_active	integer	R	R
CONFIG	max_appl_stored	integer	RW	RW
CONFIG	mss_maxobj_active	integer	R	R
CONFIG	mss_maxobj_stored	integer	RW	RW
CONFIG	mss_maxbuf_active	integer	R	R
CONFIG	mss_maxbuf_stored	integer	RW	RW
CONFIG	mss_poolsize_active	integer	R	R
CONFIG	mss_poolsize_stored	integer	RW	RW
CONFIG	mss_process_pool_active	integer	R	R
CONFIG	mss_process_pool_stored	integer	RW	RW
CONFIG	mss_net_retry_timer_active	integer	RW	RW	D
CONFIG	mss_net_retry_timer_stored	integer	RW	RW
CONFIG	audit_state	integer	RW	RW	D
CONFIG	username_default_active	integer	RW	RW	D
CONFIG	username_default_stored	integer	RW	RW
CONFIG	node_name_active	integer	R	R
CONFIG	node_name_stored	integer	RW	RW
CONFIG	ws_poolsize_active	integer	R	R
CONFIG	ws_poolsize_stored	integer	RW	RW
CONFIG	wsc_poolsize_active	integer	R	R
CONFIG	wsc_poolsize_stored	integer	RW	RW
CONFIG	tws_poolsize_active	integer	R	R
CONFIG	tws_poolsize_stored	integer	RW	RW
CONFIG	twsc_poolsize_active	integer	R	R
CONFIG	twsc_poolsize_stored	integer	RW	RW
CONFIG	astlm_active++	integer	R	R
CONFIG	astlm_stored++	integer	RW	RW
CONFIG	biolm_active++	integer	R	R
CONFIG	biolm_stored++	integer	RW	RW
CONFIG	bytlm_active++	integer	R	R
CONFIG	bytlm_stored++	integer	RW	RW
CONFIG	diolm_active++	integer	R	R
CONFIG	diolm_stored++	integer	RW	RW
CONFIG	enqlm_active++	integer	R	R
CONFIG	enqlm_stored++	integer	RW	RW
CONFIG	fillm_active++	integer	R	R
CONFIG	fillm_stored++	integer	RW	RW
CONFIG	pgflquota_active++	integer	R	R
CONFIG	pgflquota_stored++	integer	RW	RW
CONFIG	tqelm_active++	integer	R	R
CONFIG	tqelm_stored++	integer	RW	RW
CONFIG	wsdefault_active++	integer	R	R
CONFIG	wsdefault_stored++	integer	RW	RW
CONFIG	wsextent_active++	integer	R	R
CONFIG	wsextent_stored++	integer	RW	RW
CONFIG	wsquota_active++	integer	R	R
CONFIG	wsquota_stored++	integer	RW	RW
CONFIG	channelcnt_active++	integer	R	R
CONFIG	channelcnt_stored++	integer	RW	RW
CONFIG	gblsections_active++	integer	R	R
CONFIG	gblsections_stored++	integer	RW	RW
CONFIG	gblpages_active++	integer	R	R
CONFIG	gblpages_stored++	integer	RW	RW
CONFIG	gblpagfil_active++	integer	R	R
CONFIG	gblpagfil_stored++	integer	RW	RW
RUNTIME	runtime_coll_state	integer	R	R
RUNTIME	current_appls	gauge	R	R
RUNTIME	current_users	gauge	R	R
RUNTIME	current_local_users	gauge	R	R
RUNTIME	current_remote_users	gauge	R	R
RUNTIME	appl_starts	integer	R	R
RUNTIME	decnet_object	integer	R	R
RUNTIME	astlm_current++	gauge	R	R
RUNTIME	biolm_current++	gauge	R	R
RUNTIME	bytlm_current++	gauge	R	R
RUNTIME	diolm_current++	gauge	R	R
RUNTIME	enqlm_current++	gauge	R	R
RUNTIME	fillm_current++	gauge	R	R
RUNTIME	pgflquota_current++	gauge	R	R
RUNTIME	tqelm_current++	gauge	R	R
RUNTIME	wssize_current++	gauge	R	R
RUNTIME	channelcnt_current++	gauge	R	R
POOL	pool_coll_state	integer	R	R
POOL	mss_shared_total	integer	R	R
POOL	mss_shared_free	min gauge	R	R
POOL	mss_shared_largest	min gauge	R	R
POOL	mss_shared_failures	integer	R	R
POOL	mss_shared_garbage	integer	R	R
POOL	mss_process_total	integer	R	R
POOL	mss_process_free	min gauge	R	R
POOL	mss_process_largest	min gauge	R	R
POOL	mss_process_failures	integer	R	R
POOL	mss_process_garbage	integer	R	R
POOL	mss_objects	gauge	R	R
POOL	mss_msgs_1-1024++	integer	R	R
POOL	mss_msgs_1025-2048++	integer	R	R
POOL	mss_msgs_2049-4096++	integer	R	R
POOL	mss_msgs_4097-8192++	integer	R	R
POOL	mss_msgs_8193-16384++	integer	R	R
POOL	mss_msgs_16385-32768++	integer	R	R
POOL	mss_msgs_32769-65636++	integer	R	R
POOL	mss_msg_count_resets++	gauge	R	R
POOL	tws_poolsize_total++	gauge	R	R
POOL	tws_pool_large_used++	gauge	R	R
POOL	tws_pool_min_free++	gauge	R	R
POOL	twsc_poolsize_total++	gauge	R	R
POOL	twsc_pool_large_used++	gauge	R	R
POOL	twsc_pool_min_free++	gauge	R	R
POOL	ws_pool_large_used++	gauge	R	R
POOL	ws_pool_min_free++	gauge	R	R
POOL	wsc_pool_large_used++	gauge	R	R
POOL	wsc_pool_min_free++	gauge	R	R
ERROR	err_coll_state++	integer	R	R
ERROR	err_count++	integer	R	R
ERROR	last_err_msg++	string	R	R
ERROR	time_of_last_error++	time	R	R

++Only valid for use with systems running ACMS Version 4.4 or higher.

Key to Access Modes

R---Read Access
RW---Read/Write Access
Blank---Not available to the interface
D---Field is dynamic.

Contents

Index

Compaq ACMS for OpenVMS
Remote Systems Management Guide

8.51 ACMSMGMT_STOP_TRACE_MONITOR_1

Format

int acmsmgmt_stop_trace_monitor_1(sub_id_struct sub_rec,CLIENT *cl)

Parameters

sub_rec

cl

Return Value

Description

Example

8.52 ACMSMGMT_STOP_TSC_1

Format

cmd_output_rec acmsmgmt_stop_tsc_1(sub_id_struct sub_rec,CLIENT *cl)

Parameters

sub_rec

cl

Return Value

Description

Example

Chapter 9
Remote Manager Reference Tables

9.1 Data Types

9.2 ACC Table

Type:	Sub_id_struct
Access:	Read
Mechanism:	By reference
Usage:	Structure that contains the following client authorization information.

	client_id
	Type:	Integer
	Access:	Read
	Mechanism:	By value
	Usage:	If explicit authentication is being used, a valid client ID must be provided. If the value for client_id is 0, proxy access is used. Client_id is obtained by calling the acms$mgmt_get_creds procedure.

Type:	CLIENT *
Access:	Read
Mechanism:	By value
Usage:	Pointer to an RPC client handle previously obtained by calling the RPC routine CLNT_CREATE.

Type:	Cmd_output_rec
Access:	Write
Mechanism:	By reference
Usage:	Pointer to a union. The union contains either a failure code or a structure of type cmd_rec, which points to a linked list containing status messages. The following are the contents of this union:

	status
	Type:	Integer
	Access:	Write
	Mechanism:	By value
	Usage:	Failure return code.

	rc
	Type:	Integer
	Access:	Write
	Mechanism:	By value
	Usage:	Failure return code.

	data, data_warn
	Type:	Cmd_rec
	Access:	Write
	Mechanism:	By value
	Usage:	Structure containing the first node in a linked list of status messages (type dcl_list). The following are the contents of this structure:

		cmd_output
		Type:	Dcl_list
		Access:	Write
		Mechanism:	By reference
		Usage:	Pointer to a linked list of records containing status messages related to the failure of any updates. This structure contains the following fields:

			dcl_msg
			Type:	Null-terminated string
			Access:	Write
			Mechanism:	By reference
			Usage:	The status message.

			pNext
			Type:	Dcl_list
			Access:	Write
			Mechanism:	By reference
			Usage:	Pointer to the next node in the linked list.

Compaq ACMS for OpenVMSRemote Systems Management Guide

8.51 ACMSMGMT_STOP_TRACE_MONITOR_1

Format

int *acmsmgmt_stop_trace_monitor_1(sub_id_struct *sub_rec,CLIENT *cl)

Parameters

sub_rec

cl

Return Value

Description

Example

8.52 ACMSMGMT_STOP_TSC_1

Format

cmd_output_rec *acmsmgmt_stop_tsc_1(sub_id_struct *sub_rec,CLIENT *cl)

Parameters

sub_rec

cl

Return Value

Description

Example

Chapter 9Remote Manager Reference Tables

9.1 Data Types

9.2 ACC Table

Compaq ACMS for OpenVMS
Remote Systems Management Guide

int acmsmgmt_stop_trace_monitor_1(sub_id_struct sub_rec,CLIENT *cl)

cmd_output_rec acmsmgmt_stop_tsc_1(sub_id_struct sub_rec,CLIENT *cl)

Chapter 9
Remote Manager Reference Tables