HP OpenVMS DCL Dictionary

Contents

Index

SHOW SYSTEM

Displays status information about current processes.

Format

SHOW SYSTEM

Parameters

None.

Description

The SHOW SYSTEM command displays the following information about processes on the system:
Time
Process name and identification
Processing state
Priority
Total process I/O count
Cumulative processor time used
Cumulative page faults
Amount of physical memory being used
Type of process

It also checks to see whether the machine is a multiprocessor. A machine is considered a multiprocessor if the following conditions are true:

The system parameter MULTIPROCESSING is not equal to zero.
The machine accommodates more than one CPU.

If the machine is a multiprocessor, the SHOW SYSTEM command includes information about the multiprocessing environment. Each process in the currently executing state (indicated by the CUR symbol) reveals which processor it is running on. It does this by including a number beside the CUR symbol.
The SHOW SYSTEM command examines the processes on the system without stopping activity on the system. This means that process information may change during the time that SHOW SYSTEM collects the data to be displayed. As a result, there may be minor inconsistencies in the SHOW SYSTEM display. For example, SHOW SYSTEM may display two processes that schedule state CUR on the same CPU.

Qualifiers

/BATCH (default)

/NOBATCH
Displays all batch jobs for the local system. When used with the /CLUSTER qualifier, the /BATCH qualifier displays all batch jobs in the OpenVMS Cluster environment. When you use the /NOBATCH qualifier, all batch jobs are excluded from the display.
/CLUSTER
Displays the specified processes on all nodes in an OpenVMS Cluster.
/EXACT
Use with the /PAGE=SAVE and /SEARCH qualifiers to specify a search string that must match the search string exactly and must be enclosed with quotation marks (" ").
If you specify the /EXACT qualifier without the /SEARCH qualifier, exact search mode is enabled when you set the search string with the Find (E1) key.
/FULL
Displays the user identification code (UIC), the processor type, and the process size, in addition to the default information. The UIC is displayed below the process name.
/GRAND_TOTAL

/NOGRAND_TOTAL (default)
Displays a trailing line with the total of all processes matching the selection criteria and the total number of all processes on all systems displayed by the command. (See also /TOTAL.)
/HEADING

/NOHEADING
Displays a heading line above the system output. When you use the /NOHEADING qualifier, the heading line is excluded from the display.
/IMAGE
Lists all processes with their current image. (Requires WORLD privilege.)
/HIGHLIGHT[=keyword]
Use with the /PAGE=SAVE and /SEARCH qualifiers to specify the type of highlighting you want when a search string is found. When a string is found, the entire line is highlighted. You can use the following keywords: BOLD, BLINK, REVERSE, and UNDERLINE. BOLD is the default highlighting.
/IDENT=pid
Displays all processes on the system that have the specified process identification (PID) code number.
/INTERACTIVE

/NOINTERACTIVE
Displays all interactive processes on the system. When you use the /NOINTERACTIVE qualifier, all interactive processes are excluded from the display.
/MULTITHREAD
Displays all multithreaded processes for the local system. When used with the /FULL qualifier, the /MULTITHREAD qualifier displays information about each kernel thread in a multithreaded process.
For more information on kernel threads, see the HP OpenVMS Programming Concepts Manual.
/NETWORK

/NONETWORK
Displays all network processes on the system. When you use the /NONETWORK qualifier, all network processes are excluded from the display.
/NODE[=(name,...)]
Displays all the processes on the specified node or nodes. If you enter the /NODE qualifier without a value, the qualifier displays all the processes on the local node of an OpenVMS Cluster environment.
/OUTPUT[=filespec]

/NOOUTPUT
Controls where the output of the command is sent. By default, the output of the SHOW SYSTEM command is sent to the current SYS$OUTPUT device (usually your terminal). To send the output to a file, use the /OUTPUT qualifier followed by a file specification.
The file specification may not include the asterisk (*) and the percent sign (%) wildcard characters. If you enter a partial file specification (for example, specifying only a directory), SHOW is the default file name and .LIS is the default file type.
If you enter the /NOOUTPUT qualifier, output is suppressed.
/OWNER_UIC=uic
Displays all processes on the system that have the specified user identification code (UIC) number.
/PAGE[=keyword]

/NOPAGE (default)
Controls the display of system information on the screen.
You can use the following keywords with the /PAGE qualifier:

CLEAR_SCREEN Clears the screen before each page is displayed.

SCROLL Displays information one line at a time.

SAVE[= n] Enables screen navigation of information, where n is the number of pages to store.

The /PAGE=SAVE qualifier allows you to navigate through screens of information. The /PAGE=SAVE qualifier stores up to 5 screens of up to 255 columns of information. When you use the /PAGE=SAVE qualifier, you can use the following keys to navigate through the information:

Key Sequence Description

Up arrow key, Ctrl/B Scroll up one line.

Down arrow key Scroll down one line.

Left arrow key Scroll left one column.

Right arrow key Scroll right one column.

Find (E1) Specify a string to find when the information is displayed.

Insert Here (E2) Scroll right one half screen.

Remove (E3) Scroll left one half screen.

Select (E4) Toggle 80/132 column mode.

Prev Screen (E5) Get the previous page of information.

Next Screen (E6), Return, Enter, Space Get the next page of information.

F10, Ctrl/Z Exit. (Some utilities define these differently.)

Help (F15) Display utility help text.

Do (F16) Toggle the display to oldest/newest page.

Ctrl/W Refresh the display.

The /PAGE qualifier is not compatible with the /OUTPUT qualifier.
/PROCESS[=name] (default)

/NOPROCESS
Displays all specified processes on the system. If you do not specify a process name with the /PROCESS qualifier, all processes are displayed.
When you use the /NOPROCESS qualifier with the /CLUSTER qualifier, only the node or nodes available on the cluster are displayed with their respective uptimes and operating system version.
You can include the asterisk (*) and the percent sign (%) wildcard characters in the process name.
/SCHEDULING_CLASS[=class_name]

/NOSCHEDULING_CLASS
Displays processes that belong to a specific scheduling class (class_name). If the class name is not specified, all class scheduled processes are displayed along with the name of their scheduling class.
/SEARCH="string"
Use with the /PAGE=SAVE qualifier to specify a string that you want to find in the information being displayed. Quotation marks are required for the /SEARCH qualifier, if you include spaces in the text string.
You can also dynamically change the search string by pressing the Find key (E1) while the information is being displayed. Quotation marks are not required for a dynamic search.
/STATE=process-state
Displays all processes with the specified process state. You can include the asterisk (*) and the percent sign (%) wildcard characters in the process-state name. The following process states are available:

CEF (Common event flag wait) COLPG (Collided page wait)

COM (Computable) COMO (Computable but outswapped)

CUR (Current) FPG (Free page wait)

HIB (Hibernating) HIBO (Hibernating and outswapped)

LEF (Local event flag wait) LEFO (Local event flag wait and outswapped)

MUTEX ¹ (Miscellaneous wait) PFW (Page fault wait)

PSXFR (POSIX fork wait) RWAST (AST wait)

RWBRK (Waiting for BROADCAST to finish) RWCAP (CPU capability required)

RWCLU (Cluster transition wait) RWCSV (Cluster server)

RWIMG (Image activation lock) RWLCK (Lock ID database)

RWMBX (Mailbox full) RWMPB (Modified page writer busy)

RWMPE (Modified page list empty) RWNPG (Nonpaged pool)

RWPAG (Paged pool) RWPFF (Page file full)

RWQUO (Pooled quota) RWSCS (SCS wait)

RWSWP (Swapfile spacelist empty) SUSP (Suspended)

SUSPO (Suspended and outswapped)

Key Sequence	Description
Up arrow key, Ctrl/B	Scroll up one line.
Down arrow key	Scroll down one line.
Left arrow key	Scroll left one column.
Right arrow key	Scroll right one column.
Find (E1)	Specify a string to find when the information is displayed.
Insert Here (E2)	Scroll right one half screen.
Remove (E3)	Scroll left one half screen.
Select (E4)	Toggle 80/132 column mode.
Prev Screen (E5)	Get the previous page of information.
Next Screen (E6), Return, Enter, Space	Get the next page of information.
F10, Ctrl/Z	Exit. (Some utilities define these differently.)
Help (F15)	Display utility help text.
Do (F16)	Toggle the display to oldest/newest page.
Ctrl/W	Refresh the display.

¹MUTEX is output if one of the RW* states cannot be output.

/SUBPROCESS

/NOSUBPROCESS

Displays all subprocesses on the system. When you use the /NOSUBPROCESS qualifier, all subprocesses are excluded from the output.

/TOTAL

/NOTOTAL (default)

Displays a trailer after the system process list containing the total number of processes matching the selection criteria and the total number of processes on a system.

/WRAP

/NOWRAP (default)

Use with the /PAGE=SAVE qualifier to limit the number of columns to the width of the screen and to wrap lines that extend beyond the width of the screen to the next line.

The /NOWRAP qualifier extends lines beyond the width of the screen and can be seen when you use the scrolling (left and right) features provided by the /PAGE=SAVE qualifier.

Examples

#1
$ SHOW SYSTEM OpenVMS 7.3 on node KRYPTN 14-DEC-2001 17:45:47:78 Uptime 2 21:53:59 Pid Process Name State Pri I/O CPU Page flts Pages 27400201 SWAPPER HIB 16 0 0 00:29:52.05 0 0 27401E03 DOCBUILD LEF 4 37530 0 00:05:47.62 96421 601 27402604 BATCH_789 LEF 4 3106 0 00:00:48.67 4909 2636 B 27401C05 BATCH_60 LEF 6 248 0 00:00:06.83 1439 1556 B 27400207 ERRFMT HIB 8 6332 0 00:00:41.83 89 229 27400208 CACHE_SERVER HIB 16 2235 0 00:00:05.85 67 202 27400209 CLUSTER_SERVER HIB 8 4625 0 00:22:13.28 157 448 2740020C JOB_CONTROL HIB 10 270920 0 01:07:47.88 5163 1384 2740020D CONFIGURE HIB 9 125 0 00:00:00.53 104 264 . . . 27400E8D Sir Lancelot LEF 5 226 0 00:00:07.87 4560 697 2740049A Guenevere LEF 4 160 0 00:00:02.69 534 477 27401EA0 BATCH_523 CUR 4 4 17470 0 03:25:49.67 8128 5616 B 274026AF KING CUR 6 4 14045 0 00:02:03.24 20032 397 274016D5 DAVIS LEF 6 427 0 00:00:09.28 5275 1384 27401ED6 deGroot HIB 5 935 0 00:00:10.17 3029 2204 S 274012D7 BATCH_689 LEF 4 49216 0 00:14:18.36 7021 3470 B 274032D9 DECW$MAIL LEF 4 2626 0 00:00:51.19 4328 3087 B 274018E3 SERVER_0021 LEF 6 519 0 00:00:07.07 1500 389 N 274016E8 NMAIL_0008 HIB 4 10955 0 00:00:55.73 5652 151 274034EA DOERING LEF 4 2132 0 00:00:23.85 5318 452 274022EB KERR CUR 6 4 492 0 00:00:12.15 5181 459 274018EF DUFRESNE LEF 5 121386 0 00:28:00.97 7233 4094 27401AF0 EMACS$RTA43 LEF 4 14727 0 00:03:56.54 8411 4224 S 27400CF4 EAGAN HIB 5 25104 0 00:06:07.76 37407 1923 274020F5 TAN LEF 7 14726 0 00:02:10.74 34262 1669 27400CF6 KELLEY LEF 9 40637 0 00:05:15.63 18454 463 The SHOW SYSTEM command in this example was issued from a VAX system and shows all processes on the node EON.

$ SHOW SYSTEM
OpenVMS 7.3 on node KRYPTN 14-DEC-2001 17:45:47:78 Uptime 2 21:53:59
   Pid    Process Name State  Pri    I/O       CPU   Page flts Pages
 27400201 SWAPPER        HIB   16      0  0 00:29:52.05      0    0
 27401E03 DOCBUILD       LEF    4  37530  0 00:05:47.62  96421  601
 27402604 BATCH_789      LEF    4   3106  0 00:00:48.67   4909 2636 B
 27401C05 BATCH_60       LEF    6    248  0 00:00:06.83   1439 1556 B
 27400207 ERRFMT         HIB    8   6332  0 00:00:41.83     89  229
 27400208 CACHE_SERVER   HIB   16   2235  0 00:00:05.85     67  202
 27400209 CLUSTER_SERVER HIB    8   4625  0 00:22:13.28    157  448
 2740020C JOB_CONTROL    HIB   10 270920  0 01:07:47.88   5163 1384
 2740020D CONFIGURE      HIB    9    125  0 00:00:00.53    104  264
  . 
  . 
  . 
 
 27400E8D Sir Lancelot   LEF    5    226  0 00:00:07.87   4560  697
 2740049A Guenevere      LEF    4    160  0 00:00:02.69    534  477
 27401EA0 BATCH_523      CUR 4  4  17470  0 03:25:49.67   8128 5616 B
 274026AF KING           CUR 6  4  14045  0 00:02:03.24  20032  397
 274016D5 DAVIS          LEF    6    427  0 00:00:09.28   5275 1384
 27401ED6 deGroot        HIB    5    935  0 00:00:10.17   3029 2204 S
 274012D7 BATCH_689      LEF    4  49216  0 00:14:18.36   7021 3470 B
 274032D9 DECW$MAIL      LEF    4   2626  0 00:00:51.19   4328 3087 B
 274018E3 SERVER_0021    LEF    6    519  0 00:00:07.07   1500  389 N
 274016E8 NMAIL_0008     HIB    4  10955  0 00:00:55.73   5652  151
 274034EA DOERING        LEF    4   2132  0 00:00:23.85   5318  452
 274022EB KERR           CUR 6  4    492  0 00:00:12.15   5181  459
 274018EF DUFRESNE       LEF    5 121386  0 00:28:00.97   7233 4094
 27401AF0 EMACS$RTA43    LEF    4  14727  0 00:03:56.54   8411 4224 S
 27400CF4 EAGAN          HIB    5  25104  0 00:06:07.76  37407 1923
 274020F5 TAN            LEF    7  14726  0 00:02:10.74  34262 1669
 27400CF6 KELLEY         LEF    9  40637  0 00:05:15.63  18454  463
The SHOW SYSTEM command in this example was issued from a VAX system and shows 
all processes on the node EON.

The SHOW SYSTEM command in this example displays all processes on the system.
The information in this example includes the following:

Process identification (PID) code---A 32-bit binary value that uniquely identifies a process.
Process name---A 1 to 15-character string used to identify a process.
Process state---The activity level of the process, such as COM (computing), HIB (hibernation), LEF (local event flag) wait, or CUR (if the process is current). If a multiprocessing environment exists, the display shows the CPU ID of the processor on which any current process is executing.
Note that the SHOW SYSTEM command examines the processes on the system without stopping activity on the system. In this example, process information changed during the time that the SHOW SYSTEM command collected the data to be displayed. As a result, this display includes two processes, named GAWAIN and S. Whiplash, with the state CUR on the same CPU, CPU ID 6 in the example.
Current priority ¹ ---The priority level assigned to the process (the higher the number, the higher the priority).
Total process I/O count¹---The number of I/O operations the process has used thus far. This consists of both the direct I/O count and the buffered I/O count.
Charged CPU time¹---The amount of CPU time that a process has used so far.
Number of page faults¹---The number of exceptions generated by references to pages that are not in the process's working set.
Pages¹---The number of CPU-specific pages in physical memory that the process is currently occupying.
Process indicator---Letter B indicates a Batch Job; letter S indicates a Sub Process; letter N indicates a Network Process. If the letter M precedes B, S, or N, it indicates that it is a multithreaded process.
User identification code (UIC)---An 8-digit octal number assigned to a process. This number is displayed only if the /FULL qualifier is specified.

#2
$ SHOW SYSTEM /CLUSTER OpenVMS V7.3 on node ALPES 14-DEC-2001 09:09:58.61 Uptime 2 2:27:11 Pid Process Name State Pri I/O CPU Page flts Pages 31E00041 SWAPPER HIB 16 0 0 00:00:02.42 0 0 31E00047 CACHE_SERVER HIB 16 58 0 00:00:00.26 80 36 31E00048 CLUSTER_SERVER CUR 9 156 0 00:00:58.15 1168 90 31E00049 OPCOM HIB 7 8007 0 00:00:33.46 5506 305 31E0004A AUDIT_SERVER HIB 9 651 0 00:00:21.17 2267 22 31E0004B JOB_CONTROL HIB 10 1030 0 00:00:11.02 795 202 . . .

$ SHOW SYSTEM /CLUSTER
OpenVMS V7.3 on node ALPES 14-DEC-2001 09:09:58.61  Uptime 2 2:27:11
Pid       Process Name   State  Pri I/O       CPU     Page flts Pages
31E00041  SWAPPER        HIB    16    0  0 00:00:02.42       0     0
31E00047  CACHE_SERVER   HIB    16   58  0 00:00:00.26      80    36
31E00048  CLUSTER_SERVER CUR     9  156  0 00:00:58.15    1168    90
31E00049  OPCOM          HIB     7 8007  0 00:00:33.46    5506   305
31E0004A  AUDIT_SERVER   HIB     9  651  0 00:00:21.17    2267    22
31E0004B  JOB_CONTROL    HIB    10 1030  0 00:00:11.02     795   202
   .
   .
   .

The SHOW SYSTEM command in this example is taken from an Alpha system and shows all processes on all nodes of the cluster.

#3
$ SHOW SYSTEM /NODE=ALTOS OpenVMS V7.3-2 on node ALTOS 15-SEP-2009 10:26:49.59 Uptime 73 13:53:35 Pid Process Name State Pri I/O CPU Page flts Pages 24200201 SWAPPER HIB 16 0 0 00:02:41.09 0 0 24200207 CLUSTER_SERVER CUR 7 13 19735 0 01:21:54.29 95 115 24200208 SHADOW_SERVER HIB 6 5445809 0 00:04:53.18 68 122 24200209 CONFIGURE HIB 10 23 0 00:04:20.35 42 30 2420020A USB$UCM_SERVER HIB 6 165 0 00:00:02.72 164 225 2420020B LANACP HIB 12 79 0 00:00:00.01 108 138 2420020D FASTPATH_SERVER HIB 10 9 0 00:00:00.01 76 96 2420020E IPCACP HIB 10 11 0 00:00:06.88 35 51 2420020F ERRFMT HIB 7 210219 0 00:00:49.99 113 138 24200210 CACHE_SERVER HIB 16 18716 0 00:00:01.33 31 46

$ SHOW SYSTEM /NODE=ALTOS
OpenVMS V7.3-2  on node ALTOS  15-SEP-2009 10:26:49.59  Uptime  73 13:53:35 
  Pid    Process Name    State  Pri      I/O       CPU       Page flts  Pages 
24200201 SWAPPER         HIB     16        0   0 00:02:41.09         0      0 
24200207 CLUSTER_SERVER  CUR  7  13    19735   0 01:21:54.29        95    115 
24200208 SHADOW_SERVER   HIB      6  5445809   0 00:04:53.18        68    122 
24200209 CONFIGURE       HIB     10       23   0 00:04:20.35        42     30 
2420020A USB$UCM_SERVER  HIB      6      165   0 00:00:02.72       164    225 
2420020B LANACP          HIB     12       79   0 00:00:00.01       108    138 
2420020D FASTPATH_SERVER HIB     10        9   0 00:00:00.01        76     96 
2420020E IPCACP          HIB     10       11   0 00:00:06.88        35     51 
2420020F ERRFMT          HIB      7   210219   0 00:00:49.99       113    138 
24200210 CACHE_SERVER    HIB     16    18716   0 00:00:01.33        31     46

The SHOW SYSTEM command in this example is taken from an Alpha system and shows all processes on the node ALTOS.

#4
$ SHOW SYSTEM/NOPROCESS/CLUSTER/FULL OpenVMS V7.3-2 on node ALTOS 6-AUG-2009 14:31:26.31 Uptime 33 17:58:12 hp AlphaServer GS1280 7/1150 OpenVMS V7.3-2 on node ARUSHA 6-AUG-2009 14:31:26.32 Uptime 32 21:42:11 hp AlphaServer GS1280 7/1150 OpenVMS V8.3-1H1 on node BANFF 6-AUG-2009 14:31:26.33 Uptime 33 17:44:02 HP rx2600 (1.30GHz/3.0MB) OpenVMS V7.3-2 on node CHOBE 6-AUG-2009 14:31:26.33 Uptime 32 21:14:00 hp AlphaServer GS1280 7/1150

$ SHOW SYSTEM/NOPROCESS/CLUSTER/FULL
OpenVMS V7.3-2  on node ALTOS   6-AUG-2009 14:31:26.31  Uptime  33 17:58:12 
        hp AlphaServer GS1280 7/1150 
 
OpenVMS V7.3-2  on node ARUSHA   6-AUG-2009 14:31:26.32  Uptime  32 21:42:11 
        hp AlphaServer GS1280 7/1150 
 
OpenVMS V8.3-1H1  on node BANFF   6-AUG-2009 14:31:26.33  Uptime  33 17:44:02 
        HP rx2600  (1.30GHz/3.0MB) 
 
OpenVMS V7.3-2  on node CHOBE   6-AUG-2009 14:31:26.33  Uptime  32 21:14:00 
        hp AlphaServer GS1280 7/1150

This example displays only the nodes available on the cluster with their respective uptimes and operating system versions because the /NOPROCESS qualifier suppresses the display of processes. The /FULL qualifier also displays the type of hardware on which the system is running.

#5
$ SHOW SYSTEM/PROCESS=S* OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:30 AM Uptime 3 12:43:55 Pid Process Name State Pri I/O CPU Page flts Pages 20C00101 SWAPPER HIB 16 0 0 00:00:00.05 0 0 20C0010E SHADOW_SERVER HIB 6 7 0 00:00:00.03 32 4 20C0010F SECURITY_SERVER HIB 10 35 0 00:00:02.16 292 323 20C00110 SMISERVER HIB 9 67 0 00:00:00.20 152 131 20C0011A STEFANELLI CUR 0 4 63 0 00:00:00.29 538 55

$ SHOW SYSTEM/PROCESS=S*
OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:30 AM  Uptime 3 12:43:55
  Pid    Process Name  State   Pri  I/O      CPU      Page flts Pages
20C00101 SWAPPER         HIB    16    0  0 00:00:00.05        0     0
20C0010E SHADOW_SERVER   HIB     6    7  0 00:00:00.03       32     4
20C0010F SECURITY_SERVER HIB    10   35  0 00:00:02.16      292   323
20C00110 SMISERVER       HIB     9   67  0 00:00:00.20      152   131
20C0011A STEFANELLI      CUR 0   4   63  0 00:00:00.29      538    55

This example displays only the processes on the system that begin with the letter S.

#6
$ SHOW SYSTEM/NOHEADING/OUTPUT=SYSPROC.DAT 20C00101 SWAPPER HIB 16 0 0 00:00:00.05 0 0 20C00105 CONFIGURE HIB 10 24 0 00:02:00.86 41 21 20C00107 IPCACP HIB 10 9 0 00:00:00.04 33 43 20C00108 ERRFMT HIB 7 3583 0 00:00:04.31 50 61 20C00109 CACHE_SERVER HIB 16 3 0 00:00:00.02 27 35 20C0010A CLUSTER_SERVER HIB 10 11 0 00:00:00.10 59 75

$ SHOW SYSTEM/NOHEADING/OUTPUT=SYSPROC.DAT
20C00101 SWAPPER         HIB    16    0  0 00:00:00.05        0     0
20C00105 CONFIGURE       HIB    10   24  0 00:02:00.86       41    21
20C00107 IPCACP          HIB    10    9  0 00:00:00.04       33    43
20C00108 ERRFMT          HIB     7 3583  0 00:00:04.31       50    61
20C00109 CACHE_SERVER    HIB    16    3  0 00:00:00.02       27    35
20C0010A CLUSTER_SERVER  HIB    10   11  0 00:00:00.10       59    75

This example places the display of system processes into the SYSPROC.DAT file without the heading information using the /OUTPUT qualifier. In this way, you can create a data file for processing because the heading is suppressed using the /NOHEADING qualifier.

#7
$ SHOW SYSTEM/IDENT=20C0010D/FULL OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:35 AM Uptime 3 12:48:19 DEC 4000 Model 610 Pid Process Name State Pri I/O CPU Page flts Pages 20C0010D JOB_CONTROL HIB 10 41 0 00:00:00.25 51 66 [SYSTEM] 528Kb

$ SHOW SYSTEM/IDENT=20C0010D/FULL
OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:35 AM  Uptime 3 12:48:19
        DEC 4000 Model 610
  Pid    Process Name State  Pri   I/O      CPU      Page flts  Pages
20C0010D JOB_CONTROL   HIB    10    41  0 00:00:00.25       51     66
         [SYSTEM]                                               528Kb

This example displays a system process by PID number.

#8
$ SHOW SYSTEM/OWNER=TIMMER OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:34 AM Uptime 3 12:47:37 Pid Process Name State Pri I/O CPU Page flts Pages 20C00119 DECW$TE_0119 LEF 6 334 0 00:00:01.00 975 657 20C0011A TIMMER LEF 8 63 0 00:00:00.29 538 55 20C0011B _RTA1: CUR 0 4 554 0 00:00:01.72 1771 70

$ SHOW SYSTEM/OWNER=TIMMER
OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:34 AM  Uptime 3 12:47:37
  Pid    Process Name State  Pri   I/O      CPU      Page flts  Pages
20C00119 DECW$TE_0119  LEF     6   334  0 00:00:01.00      975    657
20C0011A TIMMER        LEF     8    63  0 00:00:00.29      538     55
20C0011B _RTA1:        CUR 0   4   554  0 00:00:01.72     1771     70

This example displays the system processes belonging to user TIMMER.

#9
$ SHOW SYSTEM/STATE=L* OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:36 AM Uptime 3 12:49:46 Pid Process Name State Pri I/O CPU Page flts Pages 20C00119 DECW$TE_0119 LEF 6 334 0 00:00:01.00 975 657 20C0011A STADLER LEF 8 63 0 00:00:00.29 538 55

$ SHOW SYSTEM/STATE=L*
OpenVMS V7.3 on node AAAAAA 12-MAY-2001 10:36 AM  Uptime 3 12:49:46
  Pid    Process Name State  Pri   I/O      CPU      Page flts  Pages
20C00119 DECW$TE_0119  LEF     6   334  0 00:00:01.00      975    657
20C0011A STADLER       LEF     8    63  0 00:00:00.29      538     55

This example displays the system processes with process states that begin with the letter L.

#10
$ SHOW SYSTEM/MULTITHREAD OpenVMS V7.3 on node ZIMBER 30-OCT-2001 11:34:11.51 Uptim 8 20:21:31 Pid Process Name State Pri I/O CPU Page flts Pages 0000008C SECURITY_SERVER HIB 11 131 0 00:55:25.25 4370 194 M $ SHOW SYSTEM/MULTITHREAD/FULL OpenVMS V7.3 on node ZIMBER 30-OCT-2001 11:34:13.98 Uptime 8 20:21:34 AlphaStation 400 4/233 Pid Process Name State Pri I/O CPU Page flts Pages 0000008C SECURITY_SERVER HIB 11 131 0 00:55:25.26 4370 194 M 0000010C HIB 11 [SYSTEM] 1552Kb

#10

$ SHOW SYSTEM/MULTITHREAD
OpenVMS V7.3 on node ZIMBER 30-OCT-2001 11:34:11.51 Uptim  8 20:21:31
  Pid    Process Name    State Pri  I/O      CPU    Page flts  Pages
0000008C SECURITY_SERVER HIB    11  131  0 00:55:25.25   4370   194 M
$ SHOW SYSTEM/MULTITHREAD/FULL
OpenVMS V7.3 on node ZIMBER 30-OCT-2001 11:34:13.98 Uptime 8 20:21:34
        AlphaStation 400 4/233
  Pid    Process Name    State Pri  I/O      CPU    Page flts Pages
0000008C SECURITY_SERVER HIB    11  131  0 00:55:25.26   4370   194 M
0000010C                 HIB    11
         [SYSTEM]                                              1552Kb

These examples show the results of the /MULTITHREAD qualifier and the combination results of the /MULTITHREAD and /FULL qualifiers.

#11
$ SHOW SYSTEM/CLUSTER/TOTAL/SUBPROCESS/GRAND_TOTAL OpenVMS V7.2-2 on node CHEER 27-JAN-2003 16:09:26.94 Uptime 3 23:20:43 Pid Process Name State Pri I/O CPU Page flts Pages 262000AC DTGREET LEF 4 757 0 00:00:06.76 476 493 S Total of 1/31 total processes. OpenVMS V7.3-2 on node GATOR 27-JAN-2003 16:09:26.95 Uptime 1 14:41:58 Pid Process Name State Pri I/O CPU Page flts Pages 27000428 DTWM LEF 4 26422 0 00:00:11.61 715 846 S 270004B9 SYSTEM_141 HIB 1 155 0 00:00:00.12 351 393 S Total of 2/37 total processes. OpenVMS V7.3-1 on node FISHER 27-JAN-2003 16:09:26.97 Uptime 5 02:16:57 Pid Process Name State Pri I/O CPU Page flts Pages 25A00149 DTWM LEF 4 395380 0 00:12:51.27 712 837 S 25A010AE SYSTEM_76 HIB 1 209 0 00:00:00.66 339 381 S Total of 2/34 total processes. OpenVMS V7.1-2 on node MONKEY 27-JAN-2003 16:09:27.05 Uptime 1 14:56:02 Pid Process Name State Pri I/O CPU Page flts Pages 26C00130 DTWM LEF 6 5868 0 00:00:11.84 642 777 S Total of 1/31 total processes. OpenVMS V7.3-2 on node QUERY 27-JAN-2003 16:09:27.10 Uptime 3 22:16:23 Pid Process Name State Pri I/O CPU Page flts Pages 26601139 SYSTEM_203 HIB 2 157 0 00:00:00.68 346 387 S 2660013A DTWM LEF 4 275709 0 00:10:24.99 728 852 S Total of 2/37 total processes. Grand total of 8/183 processes on 6 nodes.

#11

$ SHOW SYSTEM/CLUSTER/TOTAL/SUBPROCESS/GRAND_TOTAL
OpenVMS V7.2-2  on node CHEER  27-JAN-2003 16:09:26.94  Uptime  3 23:20:43
  Pid    Process Name State  Pri     I/O      CPU       Page flts  Pages
262000AC DTGREET      LEF      4     757  0 00:00:06.76       476    493  S
Total of 1/31 total processes.
OpenVMS V7.3-2  on node GATOR  27-JAN-2003 16:09:26.95  Uptime  1 14:41:58
  Pid    Process Name State  Pri     I/O      CPU       Page flts  Pages
27000428 DTWM         LEF      4   26422  0 00:00:11.61       715    846  S
270004B9 SYSTEM_141   HIB      1     155  0 00:00:00.12       351    393  S
Total of 2/37 total processes.
OpenVMS V7.3-1  on node FISHER 27-JAN-2003 16:09:26.97  Uptime  5 02:16:57
  Pid    Process Name State  Pri     I/O       CPU       Page flts  Pages
25A00149 DTWM         LEF      4  395380  0 00:12:51.27       712    837  S
25A010AE SYSTEM_76    HIB      1     209  0 00:00:00.66       339    381  S
Total of 2/34 total processes.
OpenVMS V7.1-2  on node MONKEY 27-JAN-2003 16:09:27.05  Uptime  1 14:56:02
  Pid    Process Name State  Pri     I/O      CPU       Page flts  Pages
26C00130 DTWM         LEF      6    5868  0 00:00:11.84       642    777  S
Total of 1/31 total processes.
OpenVMS V7.3-2  on node QUERY  27-JAN-2003 16:09:27.10  Uptime  3 22:16:23
  Pid    Process Name State  Pri     I/O      CPU       Page flts  Pages
26601139 SYSTEM_203   HIB      2     157  0 00:00:00.68       346    387  S
2660013A DTWM         LEF      4  275709  0 00:10:24.99       728    852  S
Total of 2/37 total processes.
Grand total of 8/183 processes on 6 nodes.

The SHOW SYSTEM command in this example displays the total count of subprocesses and processes on each node of a cluster. The last line lists the grand total of all subprocesses in the cluster (8) followed by the grand total of all processes in the cluster (183).

Note

¹ This information is displayed only if the process is currently in the balance set; if the process is not in the balance set, these columns contain the following message:

-- swapped out --

Contents

Index

CLEAR_SCREEN	Clears the screen before each page is displayed.
SCROLL	Displays information one line at a time.
SAVE[= n]	Enables screen navigation of information, where n is the number of pages to store.

CEF (Common event flag wait)	COLPG (Collided page wait)
COM (Computable)	COMO (Computable but outswapped)
CUR (Current)	FPG (Free page wait)
HIB (Hibernating)	HIBO (Hibernating and outswapped)
LEF (Local event flag wait)	LEFO (Local event flag wait and outswapped)
MUTEX ¹ (Miscellaneous wait)	PFW (Page fault wait)
PSXFR (POSIX fork wait)	RWAST (AST wait)
RWBRK (Waiting for BROADCAST to finish)	RWCAP (CPU capability required)
RWCLU (Cluster transition wait)	RWCSV (Cluster server)
RWIMG (Image activation lock)	RWLCK (Lock ID database)
RWMBX (Mailbox full)	RWMPB (Modified page writer busy)
RWMPE (Modified page list empty)	RWNPG (Nonpaged pool)
RWPAG (Paged pool)	RWPFF (Page file full)
RWQUO (Pooled quota)	RWSCS (SCS wait)
RWSWP (Swapfile spacelist empty)	SUSP (Suspended)
SUSPO (Suspended and outswapped)

HP OpenVMS DCL Dictionary

SHOW SYSTEM

Format

Parameters

Description

Qualifiers

/BATCH (default)

/NOBATCH

/CLUSTER

/EXACT

/FULL

/GRAND_TOTAL

/NOGRAND_TOTAL (default)

/HEADING

/NOHEADING

/IMAGE

/HIGHLIGHT[=keyword]

/IDENT=pid

/INTERACTIVE

/NOINTERACTIVE

/MULTITHREAD

/NETWORK

/NONETWORK

/NODE[=(name,...)]

/OUTPUT[=filespec]

/NOOUTPUT

/OWNER_UIC=uic

/PAGE[=keyword]

/NOPAGE (default)

/PROCESS[=name] (default)

/NOPROCESS

/SCHEDULING_CLASS[=class_name]

/NOSCHEDULING_CLASS

/SEARCH="string"

/STATE=process-state

/SUBPROCESS

/NOSUBPROCESS

/TOTAL

/NOTOTAL (default)

/WRAP

/NOWRAP (default)

Examples

1 This information is displayed only if the process is currently in the balance set; if the process is not in the balance set, these columns contain the following message: -- swapped out --

¹ This information is displayed only if the process is currently in the balance set; if the process is not in the balance set, these columns contain the following message:

-- swapped out --