Appendix 2 Configuring OpenVMS Integrity servers Hardware Operation and Boot Operations, and Booting and Shutting Down Your System

This appendix briefly describes the configuration and management tools that might be available on HP Integrity servers, and explains how to set up the system console, configure boot options, boot the OpenVMS Integrity servers operating system, and shut down the operating system. The appendix also includes brief troubleshooting procedures.

Specifically, this appendix contains the following information:

Hardware/firmware configuration and management interfaces and their features
Setting up your system console
Overview of using the Extensible Firmware Interface (EFI)
Enabling or disabling Hyper-Threading on nPartitions that have dual-core processors that support it
Configuring and managing boot operations such as the following:
- Setting the system for automatic booting
- Setting and showing boot devices
- Setting boot parameters
- Writing a new boot block
Booting operations, including the following:
- Booting the OE DVD
- Booting the system disk
- Performing a conversational (interactive) boot
- Booting with minimum startup
- Booting with the XDelta utility (XDELTA)
- Booting from a different root directory
- Booting in an emergency
Halting and shutting down operations
Troubleshooting procedures



	NOTE: Any information about Integrity servers hardware and utilities is provided in this manual for your convenience and is not intended to replace the hardware documentation included with your Integrity servers system or the latest documentation available on the Web. HP Integrity servers are available in many different configurations. Hardware, utilities, and certain hardware configuration procedures might differ significantly across models, and even across versions of the same model. Please see your hardware documentation for the most up-to-date information specific to your particular model and version. Note that the hardware documentation includes model-specific illustrations to guide you. The latest version of documentation for your server can be found online at: http://docs.hp.com/en/hw.html http://docs.hp.com http://www.hp.com/support/itaniumservers