Compaq TCP/IP Services for OpenVMS
Management Command Reference

SHOW CFS

Displays statistical information about OpenVMS and container file systems.
The NFS server software must be active.
Related commands: SHOW NFS

Format

SHOW CFS [ /CONTINUOUS[=n] ]
[ /PARAMETERS ]
[ /SUMMARY ]

Qualifiers

/CONTINUOUS[=n]
Optional. Default: Static display; /CONTINUOUS=4.
Continuously updates the screen display.
To terminate the display, press Ctrl/Z.
/PARAMETERS
Optional.
Displays the parameters.
/SUMMARY
Optional.
Displays the following information:
Wait states
Data cache performance
Summary of allocated services and resources

Examples

#1
TCPIP> SHOW CFS CFS Services OpenVMS Services ------------------- ---------------------------------------------- CLOSE 14 CREATE_FH 1 $ASSIGN 17 $QIO 0 CREDIR_FH 1 $DASSGN 15 Access 14 FREEBUFF 0 Create 2 GETATTR 16256 $DEQ 125 Deaccess 15 LINK_FH 0 $ENQ 436 LOOKUP_FH 14 Read_attr 6746 OPEN_FH 14 getVMpage 6 Write_attr 7 READ 8119 freeVMpage 0 READBUFF 0 Lookup 57 READDIR_FH 13 $CLREF 26318 READLINK_FH 0 $SETEF 26318 Extend 1 REMDIR_FH 1 REMOVE_FH 2 $DCLAST 26325 Delete 3 RENAME_FH 2 $CLRAST 1877 Enter 2 SETATTR 1 $SETAST 49601 Remove 2 STATFS 1873 SYMLINK_FH 0 $GETDVI 1875 Read_V 13 WRITE 5 Write_V 2 OTHER 6 $CHKPRO 71 TOTAL 26322

TCPIP> SHOW CFS   
  
  
    CFS Services                       OpenVMS Services 
-------------------     ---------------------------------------------- 
CLOSE            14 
CREATE_FH         1     $ASSIGN       17    $QIO                     0 
CREDIR_FH         1     $DASSGN       15         Access             14 
FREEBUFF          0                              Create              2 
GETATTR       16256     $DEQ         125         Deaccess           15 
LINK_FH           0     $ENQ         436 
LOOKUP_FH        14                              Read_attr        6746 
OPEN_FH          14     getVMpage      6         Write_attr          7 
READ           8119     freeVMpage     0 
READBUFF          0                              Lookup             57 
READDIR_FH       13     $CLREF     26318 
READLINK_FH       0     $SETEF     26318         Extend              1 
REMDIR_FH         1 
REMOVE_FH         2     $DCLAST    26325         Delete              3 
RENAME_FH         2     $CLRAST     1877         Enter               2 
SETATTR           1     $SETAST    49601         Remove              2 
STATFS         1873 
SYMLINK_FH        0     $GETDVI     1875         Read_V             13 
WRITE             5                              Write_V             2 
OTHER             6     $CHKPRO       71 
TOTAL         26322

#2
TCPIP> SHOW CFS /SUMMARY CFS Service status and performance 29-OCT-1998 14:54:36.74 Service State Cur Max Total Cacheop Cur Hit I/O Inc Status ------------- --- --- ----- ------- --- --- --- --- ---------- FP-Access 0 0 0 Read 0 0 0 0 Clusize 16 FP-Attributes 0 0 0 Read-A 0 0 0 0 Limit 256 FP-Delete 0 0 0 Write 0 0 0 0 Inuse 0 FP-Dir 0 0 0 Write-A 0 0 0 0 Busy 0 FP-Rename 0 0 0 Write-D 0 Hitrate 0 FP Sub_total 0 0 0 Buffered 0 0 0 Nameop Cur Hit Status Internal 0 0 0 ------ ---- ---- ------------- I/O 0 0 0 Add 0 Tabsize 0 Lock 0 0 0 Delete 0 Inuse 0 Logging 0 0 0 Lookup 0 0 Hitrate 0 Resource 0 0 0 RMS 0 0 0 Fileop Cur Hit Status Service 0 0 0 ------ ---- ---- ------------- Timer 0 0 0 Find 0 0 Limit 0 Other 0 0 0 Find-A 0 Inuse 655535 Synch 0 0 0 Find-C 0 Timeout 5 Hitrate 0 Services count 1 1 3 ATCBs: 1 TBABs: 0 RDCBs: 1 Pages: 0

TCPIP> SHOW CFS /SUMMARY   
  
        CFS Service status and performance    29-OCT-1998 14:54:36.74 
 
Service State   Cur  Max  Total  Cacheop  Cur  Hit  I/O  Inc    Status 
-------------   ---  ---  -----  -------  ---  ---  ---  ---  ---------- 
FP-Access         0    0     0   Read       0    0    0    0  Clusize 16 
FP-Attributes     0    0     0   Read-A     0    0    0    0  Limit  256 
FP-Delete         0    0     0   Write      0    0    0    0  Inuse    0 
FP-Dir            0    0     0   Write-A    0    0    0    0  Busy     0 
FP-Rename         0    0     0   Write-D    0                 Hitrate  0 
  FP Sub_total    0    0     0 
Buffered          0    0     0   Nameop   Cur  Hit     Status 
Internal          0    0     0   ------  ---- ----  ------------- 
I/O               0    0     0   Add        0       Tabsize     0 
Lock              0    0     0   Delete     0       Inuse       0 
Logging           0    0     0   Lookup     0    0  Hitrate     0 
Resource          0    0     0 
RMS               0    0     0   Fileop   Cur  Hit     Status 
Service           0    0     0   ------  ---- ----  ------------- 
Timer             0    0     0   Find       0    0  Limit       0 
Other             0    0     0   Find-A          0  Inuse  655535 
Synch             0    0     0   Find-C          0  Timeout     5 
                                                    Hitrate     0 
 
Services count    1    1     3   ATCBs:  1 TBABs:  0 RDCBs: 1 Pages:  0

Displays service wait states, data cache performance, and a summary of services and resources.

#3
TCPIP> SHOW CFS /PARAMETERS CFS PARAMETERS Data cache Size 256 Low limit 4 High limit 8 Attribute cache Disabled Size 0 Timeout 5 Name cache Disabled Size 0 Transfer size 8192 Write size 512 Output fatal messages to device: _OPA0:

TCPIP> SHOW CFS /PARAMETERS   
  
                         CFS PARAMETERS 
 
     Data cache 
        Size             256 
        Low limit        4 
        High limit       8 
 
     Attribute cache     Disabled 
        Size             0 
        Timeout          5 
 
     Name cache          Disabled 
        Size             0 
 
     Transfer size       8192 
     Write size          512 
 
     Output fatal messages to device: _OPA0:

Displays file system information.

SHOW COMMUNICATION

Displays the settings and status for the IP, TCP, UDP, and INET_ACP software, including routing, buffers, sockets, and memory on the running system.
Related commands: SET COMMUNICATION

Format

SHOW COMMUNICATION [ /MEMORY ]
[ /ROUTE ]
[ /SECURITY ]

Qualifiers

/MEMORY
Optional.
Displays information about memory allocated to data structures associated with network operations.
/ROUTE
Optional.
Displays routing statistics.
/SECURITY
Optional.
Displays the security settings specified with the following SET COMMUNICATION qualifiers:

/ACCEPT
/REJECT

Examples

#1
TCPIP> SHOW COMMUNICATION/ROUTE Route statistics Created by redirects 0 Modified by redirects 0 Wildcarded lookups 6 Invalid redirect calls 0 Failed lookups 0

Displays routing statistics.

#2
TCPIP> SHOW COMMUNICATION /MEMORY 1585 mbufs in use: 490 mbufs allocated to data 221 mbufs allocated to ancillary data 2 mbufs allocated to packet headers 131 mbufs allocated to socket structures 198 mbufs allocated to protocol control blocks 180 mbufs allocated to routing table entries 246 mbufs allocated to socket names and addresses 21 mbufs allocated to socket options 76 mbufs allocated to interface addresses 1 mbufs allocated to kernel table 2 mbufs allocated to ip multicast options 7 mbufs allocated to ip multicast address 10 mbufs allocated to interface multicast addess 1 mbufs allocated to <mbuf type 100> 1 mbufs allocated to <mbuf type 108> 3 mbufs allocated to <mbuf type 109> 7 mbufs allocated to <mbuf type 112> 28 mbufs allocated to <mbuf type 113> 28 mbufs allocated to <mbuf type 114> 3 mbufs allocated to <mbuf type 115> 3 mbufs allocated to <mbuf type 117> 5 mbufs allocated to <mbuf type 118>

TCPIP> SHOW COMMUNICATION /MEMORY
1585 mbufs in use: 
        490 mbufs allocated to data 
        221 mbufs allocated to ancillary data 
        2 mbufs allocated to packet headers 
        131 mbufs allocated to socket structures 
        198 mbufs allocated to protocol control blocks 
        180 mbufs allocated to routing table entries 
        246 mbufs allocated to socket names and addresses 
        21 mbufs allocated to socket options 
        76 mbufs allocated to interface addresses 
        1 mbufs allocated to kernel table 
        2 mbufs allocated to ip multicast options 
        7 mbufs allocated to ip multicast address 
        10 mbufs allocated to interface multicast addess 
        1 mbufs allocated to <mbuf type 100> 
        1 mbufs allocated to <mbuf type 108> 
        3 mbufs allocated to <mbuf type 109> 
        7 mbufs allocated to <mbuf type 112> 
        28 mbufs allocated to <mbuf type 113> 
        28 mbufs allocated to <mbuf type 114> 
        3 mbufs allocated to <mbuf type 115> 
        3 mbufs allocated to <mbuf type 117> 
        5 mbufs allocated to <mbuf type 118>

Displays information about memory usage.

#3
TCPIP> SHOW COMMUNICATION /SECURITY Communication Security Parameters Allow Log: Acpt Actv Dactv Conn Error Exit Logi Logo Mdfy Rjct TimO Addr Force Log: None Security device: disabled Access lists Accept host: 0.0.0.0 Accept netw: 0.0.0.0

TCPIP> SHOW COMMUNICATION /SECURITY
 
Communication Security Parameters 
 
Allow Log:  Acpt Actv Dactv Conn Error Exit Logi Logo Mdfy Rjct TimO Addr 
Force Log:  None 
 
Security device:  disabled 
 
Access lists 
 Accept host: 0.0.0.0 
 Accept netw: 0.0.0.0

Displays information about security parameters that were specified with the SET COMMUNICATION command.

SHOW CONFIGURATION

Displays the information in the configuration database. This database, read by the TCP/IP Services startup procedure, holds information to:

Configure the lower-layer protocols, including dynamic routing.
Configure and enable the Internet interfaces.
Configure the services you want enabled when TCP/IP Services starts up.
Configure the BIND resolver.
Configure the BIND server, including the default domain.
Configure SMTP.
Configure SNMP.
Configure TIME.
Map file systems.

Because the SET CONFIGURATION commands do not take effect until the next time TCP/IP Services starts up, the SHOW CONFIGURATION command might not display the current settings for the running software. For example, the information you see from SHOW CONFIGURATION PROTOCOL might differ from the SHOW PROTOCOL /PARAMETERS output.
Related commands: All SET CONFIGURATION commands

Format

SHOW CONFIGURATION { component
ENABLE SERVICE [service]
START ROUTING }
[ /COMMON ]
[ /FULL ]
[ /OUTPUT=file ]

Parameters

component
Required if you do not specify ENABLE SERVICE or START ROUTING.
Component, defined in the configuration database, whose configuration you want to display.
ENABLE SERVICE [service]
Required if you do not specify component or START ROUTING.
Displays either the specified component or all the components that are enabled by the TCP/IP Services startup procedure.
START ROUTING
Required if you do not specify component or ENABLE SERVICE.
Shows whether or not routing is configured to start running by the TCP/IP Services startup procedure.

Qualifiers

/COMMON
Optional. Default: Node specific.
Valid only with SHOW CONFIGURATION ENABLE SERVICE.
Displays the information in the configuration database for the clusterwide enabling or disabling of services.
/FULL
Optional. The default is to give a brief listing of the information.
Displays complete information.
Use with the component parameter.
/OUTPUT=file
Optional. Default: Screen display.
Writes output to the specified file.

Examples

#1
TCPIP> SHOW CONFIGURATION ENABLE SERVICE Enable service FTP, FTP_CLIENT, LPD, MOUNT, NFS, NFS_CLIENT, PCNFS, PORTMAPPER, REXEC, RSH, SMTP, SNMP

Displays the services configured in the services database that will be enabled by the TCP/IP Services startup procedure.

#2
TCPIP> SHOW CONFIGURATION SNMP SNMP Configuration Flags: AuthenTraps Sets Contact: Sam Spade Location First: Falcon Building Second: Los Angeles, California Community Type Address_list public Read 0.0.0.0 trapit Read Trap 136.20.0.10 trapit2 Read Trap 136.20.0.12, 136.20.0.15 rw2 Read Write 136.20.0.15, 136.20.0.100

TCPIP> SHOW CONFIGURATION SNMP
SNMP Configuration 
 
Flags:    AuthenTraps Sets 
 
Contact:  Sam Spade 
 
Location 
  First:  Falcon Building 
  Second: Los Angeles, California 
 
Community           Type       Address_list 
 
public              Read       0.0.0.0 
 
trapit              Read Trap  136.20.0.10 
 
trapit2             Read Trap  136.20.0.12, 136.20.0.15 
 
rw2                 Read Write 136.20.0.15, 136.20.0.100

Displays the SNMP configuration.

#3
TCPIP> SHOW CONFIGURATION NAME_SERVICE BIND Resolver Configuration Transport: UDP Domain: fred.parrot.brd.com Retry: 4 Timeout: 4 Servers: 11.20.208.10, 11.20.208.53 Path: No values defined TCPIP>

Displays, from the configuration database, the BIND resolver configuration.

#4
TCPIP> SHOW CONFIGURATION INTERFACE Interface: DE1 IP_Addr: 11.20.208.100 NETWRK: 255.255.0.0 BRDCST: 11.20.255.255 Interface: LO0 IP_Addr: 137.0.0.1 NETWRK: 255.0.0.0 BRDCST: TCPIP>

Displays the permanent definition of Internet interfaces DE1 and LO0.

#5
TCPIP> SHOW CONFIGURATION SMTP SMTP Configuration Options Initial interval: 0 00:30:00.00 Address_max: 16 NOEIGHT_BIT Retry interval: 0 01:00:00.00 Hop_count_max: 16 NORELAY Maximum interval: 3 00:00:00.00 TOP_HEADERS Timeout Initial Mail Receipt Data Terminate Send: 5 5 5 3 10 Receive: 5 Alternate gateway: not defined General gateway: not defined Substitute domain: not defined Zone: not defined Postmaster: TCPIP_SMTP Log file: SYS$SPECIFIC:[TCPIP$SMTP]TCPIP$SMTP_LOGFILE.LOG Generic queue Queues Participating nodes TCPIP$SMTP_CRANE_00 1 CRANE

TCPIP> SHOW CONFIGURATION SMTP   
  
  
SMTP Configuration  
                                                                   Options  
Initial interval:   0 00:30:00.00       Address_max:    16       NOEIGHT_BIT  
Retry interval:     0 01:00:00.00       Hop_count_max:  16       NORELAY  
Maximum interval:   3 00:00:00.00                                TOP_HEADERS  
   
Timeout             Initial       Mail    Receipt       Data  Terminate  
  Send:                   5          5          5          3         10  
  Receive:                5  
   
Alternate gateway:  not defined  
General gateway:    not defined  
   
Substitute domain:  not defined  
Zone:               not defined  
   
Postmaster:         TCPIP_SMTP  
Log file:           SYS$SPECIFIC:[TCPIP$SMTP]TCPIP$SMTP_LOGFILE.LOG  
   
Generic queue       Queues   Participating nodes  
                       
TCPIP$SMTP_CRANE_00     1     CRANE

Displays the SMTP configuration.

SHOW CONFIGURATION PROTOCOL

Displays information in the configuration database which sets the parameters for ICMP, IP, TCP, and UDP when TCP/IP Services starts up.
Related commands: SET CONFIGURATION PROTOCOL, SET PROTOCOL

Format

SHOW CONFIGURATION PROTOCOL [ protocol ]
[ /PARAMETERS ]

Parameters

protocol
Optional. Default: All protocols.
Specify one of the following: ICMP, IP, TCP, UDP.

Qualifiers

/PARAMETERS
Optional.
Shows parameter settings. You can specify any protocol.

Examples

#1
TCPIP> SHOW CONFIGURATION PROTOCOL ICMP Redirect: enabled Unreachable: disabled IP Forward: disabled Reassembly timer: 0 TCP Delay ACK: enabled Window scale: enabled Drop count: 0 Probe timer: 0 Receive Send Push: disabled disabled Quota: 0 0 UDP Unpriv. broadcast: disabled Receive Send Checksum: enabled enabled Quota: 0 0

TCPIP> SHOW CONFIGURATION PROTOCOL 
 
 
 
ICMP 
  Redirect:               enabled 
  Unreachable:           disabled 
 
IP 
  Forward:               disabled 
 
  Reassembly timer:             0 
 
TCP 
  Delay ACK:              enabled 
  Window scale:           enabled 
  Drop count:                   0 
  Probe timer:                  0 
 
                          Receive                Send 
 
  Push:                  disabled            disabled 
  Quota:                        0                   0 
 
UDP 
  Unpriv. broadcast:     disabled 
 
                          Receive                Send 
 
  Checksum:               enabled             enabled 
  Quota:                        0                   0

Displays information in the configuration database.

SHOW DEVICE_SOCKET

Displays:

Device socket counters
Current settings from the running communications software

(A device socket is composed of two parts: the internet device (interface) and the socket.)

Format

SHOW DEVICE_SOCKET [ device_socket ]
[ /CONTINUOUS[=n] ]
[ /FULL ]
[ /HOST=host ]
[ /[NO]LOCAL ]
[ /PORT=n ]
[ /SERVICE=service ]
[ /TYPE=socket_type ]

Parameters

device_socket
Optional. Default: All device sockets.
Device socket for which you want information.
Specify the characters BG and the device's unit number, for example, BG3, BG17.

Qualifiers

/CONTINUOUS[=n]
Optional. Default: Static display; /CONTINUOUS=4.
Automatically updates the display.
Screen update interval in seconds. Valid only for a specific device socket.
To terminate the display, press Ctrl/C.
/FULL
Optional. The default is to give a brief listing of the information.
Displays complete information, including:

Application option settings, for example, ACCEPT or FULL_DUPLEX_CLOSE
State of the service
Counters for receiving and sending buffers

/HOST=host
Optional. Default: All hosts.
Displays information for device sockets bound to the specified host.
This does not include device sockets bound to the "ANY host" (address 0.0.0.0).
/LOCAL

/NOLOCAL
Optional. Default: /LOCAL.
Displays information for device sockets bound to hosts in the local hosts database.
/NOLOCAL: Displays information for device sockets bound to hosts in the hosts database and hosts known by the BIND resolver.
/PORT=n
Optional. Default: All local ports.
Displays information for device sockets bound to the specified local port.
/SERVICE=service
Optional. Default: All services.
Displays information for device sockets used for the specified service.
/TYPE=socket_type
Optional. Default: /TYPE=ALL.
Displays information for the specified type of device socket. Specify one of the following:

STREAM
DGRAM

Examples

#1
TCPIP> SHOW DEVICE_SOCKET BG21 /FULL Device_socket: BG21 Type: STREAM LOCAL REMOTE Port: 21 0 Host: * * Service: FTP RECEIVE SEND Queued I/O 0 0 Q0LEN 0 Socket buffer bytes 0 0 QLEN 0 Socket buffer quota 61440 61440 QLIMIT 1024 Total buffer alloc 0 0 TIMEO 0 Total buffer limit 491520 491520 ERROR 0 Buffer or I/O waits 1 0 OOBMARK 0 Buffer or I/O drops 0 0 I/O completed 0 0 Bytes transferred 0 0 Options: ACCEPT REUSEADR State: PRIV RCV Buff: WAIT SND Buff: None

TCPIP> SHOW DEVICE_SOCKET BG21 /FULL  
  
  
Device_socket:  BG21        Type: STREAM 
                      LOCAL                          REMOTE 
         Port:           21                               0 
         Host:  *                               * 
      Service:  FTP 
 
                                                           RECEIVE       SEND 
                                   Queued I/O                    0             0 
       Q0LEN         0             Socket buffer bytes           0             0 
       QLEN          0             Socket buffer quota       61440         61440 
       QLIMIT     1024             Total buffer alloc            0             0 
       TIMEO         0             Total buffer limit       491520        491520 
       ERROR         0             Buffer or I/O waits           1             0 
       OOBMARK       0             Buffer or I/O drops           0             0 
                                   I/O completed                 0             0 
                                   Bytes transferred             0             0 
 
  Options:  ACCEPT REUSEADR 
  State:    PRIV 
  RCV Buff: WAIT 
  SND Buff: None

Displays complete information about device socket BG21, including the options that are set, for example, the FULL_DUPLEX_CLOSE option.
(With the FULL_DUPLEX_CLOSE option set, the first data transmission on a TCP connection that has been closed by the remote application returns an EPIPE error. Subsequent send operations on the half-closed socket proceed normally.)
The following table describes the counters in the first column of the display.

Counter Meaning

Q0LEN Number of sockets that are about to be connected to the specified socket

QLEN Number of sockets that have established a connection but have not yet been accepted by the specified socket

QLIMIT Number of sockets for the Q0LEN and QLEN sockets

TIMEO Not used

ERROR Error code temporarily stored on the socket

OOBMARK Out-of-band mark

Counter	Meaning
Q0LEN	Number of sockets that are about to be connected to the specified socket
QLEN	Number of sockets that have established a connection but have not yet been accepted by the specified socket
QLIMIT	Number of sockets for the Q0LEN and QLEN sockets
TIMEO	Not used
ERROR	Error code temporarily stored on the socket
OOBMARK	Out-of-band mark

#2
TCPIP> SHOW DEVICE_SOCKET BG75 /CONTINUOUS=10

Displays information about device socket BG75 every 10 seconds.

#3
TCPIP> SHOW DEVICE_SOCKET /HOST="lark"

Displays information about all device sockets for remote host lark .

#4
TCPIP> SHOW DEVICE_SOCKET BG1898 Port Remote Device_socket Type Local Remote Service Host bg1898 STREAM 23 2568 TELNET 16.20.176.227

Displays socket type, service, and host information for device BG1898.

SHOW EXPORT

Displays disks/directories available for mounting by NFS clients, in the form of UNIX path names. It also displays the clients allowed to mount these path names.
Related commands: ADD EXPORT, REMOVE EXPORT, MAP, SET CONFIGURATION MAP, SET CONFIGURATION NOMAP, SHOW MAP, SHOW CONFIGURATION MAP

Format

SHOW EXPORT [ "/path/name" ]
[ /HOST=host ]
[ /OUTPUT=file] ]

restrictions

Requires read access to the export database.

Parameters

"/path/name"
Optional. Default: All exported file systems.
Exported files for which to show access rights.
To specify multiple directory names, separate them with slashes.

Qualifiers

/HOST="host_name"
Optional. Default: All hosts.
NFS client hosts for which you want to display access rights.
/OUTPUT=file
Optional. Default: Screen display. Sends output to the specified file.

Examples

#1
TCPIP> SHOW EXPORT File system Host name /TOUCAN TOUCAN, toucan /talkers parrot /aviary_dua0 * /condor_root/root condor /condor_root/work4 condor /nene_d * /nfstest_unix/lark1 * /nfstest_unix/lark2 * /spoonbill dove, nuthatch, dove.tree.branch.com toucan, oriole.tree.branch.com /spoonbill/birdy dove, DOVE, nuthatch, thrush, thrush.tree.branch.com /spoonbill/bigbirdy dove

TCPIP> SHOW EXPORT  
  
File system                Host name   
  
/TOUCAN                    TOUCAN, toucan   
/talkers                   parrot   
/aviary_dua0               *   
/condor_root/root          condor   
/condor_root/work4         condor 
/nene_d                    *   
/nfstest_unix/lark1        *   
/nfstest_unix/lark2        *   
/spoonbill                 dove, nuthatch, dove.tree.branch.com  
                           toucan, oriole.tree.branch.com   
/spoonbill/birdy           dove, DOVE, nuthatch, thrush,   
                           thrush.tree.branch.com   
/spoonbill/bigbirdy        dove

Displays exported NFS file systems with the clients that have access rights.

#2
TCPIP> SHOW EXPORT/HOST="condor" File System Host name /condor_root/root condor /condor_root/work4 condor

Displays exported NFS file systems for clients on host CONDOR.

Contents

Index

Compaq TCP/IP Services for OpenVMSManagement Command Reference

SHOW CFS

Format

Qualifiers

/CONTINUOUS[=n]

/PARAMETERS

/SUMMARY

Examples

SHOW COMMUNICATION

Format

Qualifiers

/MEMORY

/ROUTE

/SECURITY

Examples

SHOW CONFIGURATION

Format

Parameters

component

ENABLE SERVICE [service]

START ROUTING

Qualifiers

/COMMON

/FULL

/OUTPUT=file

Examples

SHOW CONFIGURATION PROTOCOL

Format

Parameters

protocol

Qualifiers

/PARAMETERS

Examples

SHOW DEVICE_SOCKET

Format

Parameters

device_socket

Qualifiers

/CONTINUOUS[=n]

/FULL

/HOST=host

/LOCAL

/NOLOCAL

/PORT=n

/SERVICE=service

/TYPE=socket_type

Examples

SHOW EXPORT

Format

restrictions

Parameters

"/path/name"

Qualifiers

/HOST="host_name"

/OUTPUT=file

Examples

Compaq TCP/IP Services for OpenVMS
Management Command Reference