 |
OpenVMS System Management Utilities Reference Manual
**************************** ENTRY 6. ****************************
ERROR SEQUENCE 3. LOGGED ON SID 03003700
MACHINE CHECK, 6-MAR-2000 10:11:34.70
KA730 REV# 0. MIC# 55.
EXCEPTION PC 80038DC0
ERROR PSL 01C00000
INTERRUPT PRIORITY LEVEL = 00.
PREVIOUS MODE = USER
CURRENT MODE = EXECUTIVE
SUMMARY CODE 00000007
UNCORRECTABLE ECC ERROR
1ST PARAMETER 00166200
PAGE #2865. IN ERROR
**************************** ENTRY 60. ****************************
ERROR SEQUENCE 4872. LOGGED ON SID 02006148
MACHINE CHECK, 6-MAR-2000 03:50:08.28
KA750 REV# 72. MIC# 97.
EXCEPTION PC 80006173
ERROR PSL 00C80009
C-BIT
N-BIT
INTERRUPT PRIORITY LEVEL = 08.
PREVIOUS MODE = USER
CURRENT MODE = KERNEL
SUMMARY CODE 00000002
TRANSLATION BUFFER OR BUS ERROR
VA LAST REF 800A079E
PC AT ERROR 80006178
MDR 8009F38C
SMR 00000008
CPU MODE = KERNEL
VIRTUAL
READ
RLTO 00000000
TBER 00000007
TB G0 DATA ERROR
TB G1 DATA ERROR
TB G0 TAG ERROR
CAER 00000000
BER 00000000
MCESR 00000004
OPERAND REFERENCE
TB PARITY ERROR
**************************** ENTRY 84. ****************************
ERROR SEQUENCE 4949. LOGGED ON SID 01388525
MACHINE CHECK, 6-MAR-2000 15:09:11.31
KA780 REV# 7. SERIAL# 1317.
EXCEPTION PC 00004890
ERROR PSL 03C00000
INTERRUPT PRIORITY LEVEL = 00.
PREVIOUS MODE = USER
CURRENT MODE = USER
SUMMARY CODE 00000000
CP READ TIMEOUT
- OR ERROR CONFIRMATION FAULT
CES 00010084
SUPERVISOR AST PENDING
ALU C31
NESTED ERROR
MICRO PC 00000200
VA/VIBA 7FF735D4
D REGISTER FFFFC284
TBER0 0000DC81
ENABLE MEMORY MANAGEMENT
TB HIT GROUP 1
MICRO CODE "MCT" FIELD = 07
MICRO CODE "ADS"
MICRO CODE "FS"
TBER1 00000040
LAST TB WRITE PULSE TO GROUP 1
SBITA E00B83F5
TIMEOUT CONSOLE ADDR = 002E0FD4
PROTECTION CHECKED REFERENCE
TIMEOUT REFERENCE IN USER MODE
CACHE PE REG 00004000
CP ERROR
SBIER 00001802
SBI NOT BUSY
WAITING FOR READ DATA TIMEOUT
CPU TIMEOUT
|
**************************** ENTRY 82. ****************************
ERROR SEQUENCE 1077. LOGGED ON SID 04FFFFFF
MACHINE CHECK 30-MAR-2000 20:55:17.41
KA86 REV# 255. SERIAL# 4095. MFG PLANT 7.
EHMSTS 40000802
VMS ERROR CODE = EBOX
MICRO TRAP VECTOR = 08 (X)
EHM ENTERED
EVMQSAV 00000004
VIRTUAL ADDRESS FOR EBOX PORT
_ REQUESTS
EBCS 00000800
ECS PARITY ERROR
EDPSR 00000000
CSLINT 04183D1F
C BUS ADDRESS = 1F (X)
C BUS DATA = 3D (X)
INTERRUPT PRIORITY REQUEST = 8.
INTERNAL SOURCE
I/O ADAPTER = 0.
INTERVAL TIMER
IBESR 00004000
UOP SEL = IBOX REGISTER SELECT
UTPR <2:0> = EBOX PORT
ENABLE ETRAP
EBXWD1 00000004
TOP OF "SP STACK"
_ CONTENT IS ONE OF THE LAST
_ LONGWORDS WRITTEN TO MBOX
EBXWD2 7FF593D0
TOP OF "SP STACK" MINUS ONE
_ CONTENT IS ONE OF THE LAST
_ LONGWORDS WRITTEN TO MBOX
VASAV 7FF593F8
VIRTUAL ADDRESS FOR OP FETCH
_ PORT REQUEST ADDRESS
_ CALCULATION FOR OPERAND
_ PRE-FETCH AND RESULT DELIVERY
VIBASAV 0000E7FF
VIRTUAL ADDRESS OF NEXT IBUF
_ PORT REQUEST TO FILL IBUFFER
ESASAV 0000E7F2
PC OF INSTRUCTION DURING EBOX
_ EXECUTION AND RESULT STORAGE
ISASAV 0000E7F2
PC OF INSTRUCTION WHICH VA
_ CALCULATION UNIT IS DOING ADDRESS
_ CALCULATION OR OPERAND PRE-FETCH
_ OR IS PASSING OPERAND DATA
CPC 0000E7F4
PC OF INSTRUCTION IN
_ DECODE UNIT
MSTAT1 84006004
C0 TAG MISS
BLOCK HIT
ABUS ADAPTER = 0.
WORD COUNT = 0.
CYCLE TYPE = READ REGISTER
DEST CP = EBOX
MSTAT2 00004F00
DIAGNOSTIC STATUS FROM SBIA
_ RD COM/MSK <3:0> = F (X)
_ RD DAT L/S <1:0> = 0 (X)
_ ABUS BAD DATA CODE
PAMM DATA = ARRAY #0.,SLOT #1.
MDECC 00066200
(* DATA NOT VALID *)
MERG 04000100
MEMORY MANAGEMENT ENABLE
CSHCTL 00000003
CACHE 0 ENABLE
CACHE 1 ENABLE
MEAR 0000007C
PHYSICAL ADDRESS IN PA LATCH
AT TIME OF ERROR = 0000007C
MEDR 0000001F
DATA WORD USED DURING ERROR
FBXERR FFFFFFFF
(* DATA NOT VALID *)
CSES 1BD73E01
CS CODE = EBOX CONTROL STORE PARITY ERROR
CS SYNDROME = 3E (X)
CS ADDRESS = 1BD7 (X)
ERROR PC 0000E7F2
ERROR PSL 03C00004
Z-BIT
INTERRUPT PRIORITY LEVEL = 00.
PREVIOUS MODE = USER
CURRENT MODE = USER
IOA ES 00000000
(* DATA NOT VALID *)
AN/ER/INC=MACH ERR:ERRLOG.SYS_31MAR2000/ENT=S=82/OUT=DP.
|
Memory Error Entries Example
Memory error log entries consist of two types: fatal and nonfatal. A
nonfatal memory error indicates that a single bit has failed within a
memory location, and that the ECC (error code correctable) was able to
compensate for the error and correct the data. A fatal error indicates
that multiple bits were erroneous, and that the ECC could not correct
the data.
Both the fatal and nonfatal memory entries are similar in their format.
The memory error log reports can be divided into two logical areas of
information. The first section of a memory error log report is the
identification area. The second section contains memory
controller-specific information. This data represents the information
contained within the memory controller registers at the time of the
memory error. Bit-to-text translation of the registers is performed and
then listed on the right side of the report.
**************************** ENTRY 7. ****************************
ERROR SEQUENCE 4. LOGGED ON SID 03003700
MEMORY ERROR, 6-MAR-2000 10:11:34.70
KA730 REV# 0. MIC# 55.
CSR0 00166200
ERROR SYNDROME = 7F
CORRECTED ERROR, BIT #31.
ARRAY #1. IN ERROR
CSR1 18000000
MEMORY MAPPING ENABLE
ENABLE "CRD" REPORTING
CSR2 8100000F
MEMORY SIZE = 2048.K
64K RAMS PRESENT
**************************** ENTRY 91. ****************************
ERROR SEQUENCE 342. LOGGED ON SID 0138207A
FATAL MEMORY ERROR, 4-MAR-00 08:16:45.20
KA780 REV# 7. SERIAL# 122.
CONTROLLER AT TR #5.
PRTCFNG 00000040
ADAPTER IS MULTI-PORT MEMORY
PORT NUMBER = 0.
PRTCR 00000003
MASTER INTERRUPT ENABLE
PORT INTERFACE INTERRUPT ENABLE
RAM COUNT 0.
PCSR 07870003
ERROR INTERRUPT ENABLE
IVDTCR 01870001
INVALIDATE CACHE DEVICE ID = 0.
8. ARRAY BOARD(S) PRESENT
MEMORY BASE ADDRESS = 6144.K
AER 16A70005
ERROR SYNDROME = 05
RDS ERROR
ARRAY #6. IN ERROR
ARRAY BANK #1. IN ERROR
ERROR LOG REQUEST
CSR0 0000C2C8
MEMORY CONTAINS VALID DATA
PORT #2. POWERED DOWN
PORT #3. POWERED DOWN
ERROR INTERRUPT FROM PORT #1.
PORT #2. OFFLINE
PORT #3. OFFLINE
CSR1 0000380A
PORT #0. CONNECTED TO AN SBI
PORT #1. CONNECTED TO AN SBI
PORT #2. NOT PRESENT
PORT #3. NOT PRESENT
INVALIDATION MAP PRESENT
PORT #0. INVALIDATION ACK RECEIVED
PORT #1. INVALIDATION ACK RECEIVED
MAT 0000C000
|
Nonfatal and User Bugchecks Entry Example
The following example shows a fatal bugcheck. Nonfatal and user
bugcheck reports have the same format. These reports consist of three
sections: identification, bugcheck reason and process information, and
system register information.
Error Log Report Generator Version 7.3
******************************* ENTRY 25. *******************************
ERROR SEQUENCE 15. LOGGED ON: CPU_TYPE 00000002
DATE/TIME 22-JUL-2000 13:43:48.96 SYS_TYPE 00000003
SYSTEM UPTIME: 90 DAYS 00:07:26
SCS NODE: LSR3 OpenVMS V7.3
FATAL BUGCHECK SYS_TYPE = 03
OPERATOR, Operator requested system shutdown
PROCESS NAME Aut
PROCESS ID 00010004
ERROR PC 00000000 000304A0
Process Status = 08000000 00001F03, SW = 03, Previous Mode = USER
System State = 00, Current Mode = KERNEL
VMM = 00 IPL = 31, SP Alignment = 8
STACK POINTERS
KSP 00000000 7FF95F08 ESP 00000000 7FF9A000 SSP 00000000 7FFA04C0
USP 00000000 7FE63B80
GENERAL REGISTERS
R0 00000000 00000001 R1 00000000 00000000 R2 FFFFFFFF 805ED100
R3 00000000 00000001 R4 00000000 00000001 R5 00000000 00000001
R6 00000000 00000000 R7 00000000 00000000 R8 00000000 7FFA05F8
R9 00000000 7FFA0800 R10 00000000 00000000 R11 00000000 7FFBE3E0
R12 00000000 00000004 R13 00000000 00010100 R14 00000000 02080061
R15 FFFFFFFF 80403C30 R16 00000000 00000474 R17 00000000 00004000
R18 00000000 00000000 R19 00000000 00000000 R20 FFFFFFFF 805C04B6
R21 00000000 00800000 R22 FFFFFFFF 804308E8 R23 88000000 E4000003
R24 00000000 00000000 R25 00000000 00000001 R26 00000000 00000002
R27 00000000 00000002 R28 00000000 00030440 FP 00000000 7FF95F10
SP 00000000 7FF95F08 PC 00000000 000304A0 PS 08000000 00001F03
SYSTEM REGISTERS
PTBR 00000000 000005D3
Page Table Base Register
PCBB 00000000 00B98080
Privileged Context Block Base
PRBR FFFFFFFF 805C0000
Processor Base Register
SCBB 00000002 00000000
System Control Block Base
SISR 00000000 0000017B
Software Interrupt Summary Register
ASN 00000000 00000000
Address Space Number
ASTSR_ASTEN 00000000 0000003F
AST Summary/AST Enable
AT 00000000 0000000F
Absolute Time
|
Unknown Entries Examples
The following examples are sample reports for error log entries of
unknown type. Each report has an identification section and an error
log record section. The error log record section contains two types of
records: interpretable and noninterpretable. If ERROR LOG can interpret
the fields of the record, the utility gives the name of the field, its
contents, and interprets what the field is. If the utility cannot
interpret the fields of a record, it gives the longword value of the
field and its contents in hexadecimal format.
**************************** ENTRY 95. ****************************
ERROR SEQUENCE 2. LOGGED ON SID 03003600
"UNKNOWN DEVICE" ENTRY, 4-MAR-00 10:12:12.44
KA730 REV# 0. MIC# 54.
ERROR LOG RECORD
ERF$L_SID 03003600
SYSTEM ID REGISTER
ERL$W_ENTRY 0062
ERROR ENTRY TYPE
EXE$GQ_SYSTIME C9764980
008C2F30 64 BIT TIME WHEN ERROR LOGGED
ERL$GL_SEQUENCE 0002
UNIQUE ERROR SEQUENCE = 2.
UCB$W_STS 0110
DEVICE STATUS
UCB$B_DEVCLASS 42
DEVICE CLASS = 66.
UCB$B_DEVTYPE 42
DEVICE TYPE = 66.
UCB$W_UNIT 0000
PHYSICAL UNIT NUMBER = 0.
UCB$W_ERRCNT 0001
UNIT ERROR COUNT = 1.
UCB$L_OPCNT 00000001
UNIT OPERATION COUNT = 1.
ORB$L_OWNER 00010004
OWNER UIC = [001,004]
UCB$L_DEVCHAR 0C440007
DEVICE CHARACTERISTICS
UCB$B_SLAVE 00
DEVICE SLAVE CONTROLLER = 0.
DDB$T_NAME 41515403
00000000
00000000
00000000
/.TQA............/
LONGWORD 1. 00000008
LONGWORD 2. 00000007
LONGWORD 3. 00000502
LONGWORD 4. 04000000
LONGWORD 5. 00010000
LONGWORD 6. 00000000
LONGWORD 7. 00000080
LONGWORD 8. 00000000
LONGWORD 9. 00000000
**************************** ENTRY 161. ****************************
ERROR SEQUENCE 213. LOGGED ON SID 070001FF
"UNKNOWN ENTRY", 4-MAR-00 11:35:15.73
UVAX1 REV# 255. MIC# 1.
ERROR LOG RECORD
ERF$L_SID 070001FF
SYSTEM ID REGISTER
ERL$W_ENTRY 0008
ERROR ENTRY TYPE
EXE$GQ_SYSTIME 89953F20
008C3E2A 64 BIT TIME WHEN ERROR LOGGED
ERL$GL_SEQUENCE 00D5
UNIQUE ERROR SEQUENCE = 213.
LONGWORD 1. 00000001
/..../
LONGWORD 2. 00410001
/..A./
|
Example of a Brief Report
The following example shows a report generated with the /BRIEF
qualifier.
Error Log Report Generator Version 7.3
**************************** ENTRY 1. ****************************
ERROR SEQUENCE 11. LOGGED ON: SID 08000000
DATA/TIME 18-JUL-2000 22:53:41.57 SYS_TYPE 00000000
DEVICE ERROR KA630
RD32 SUB-SYSTEM, UNIT _RICHIE$DUA0:
DMA ADDRESS 000000
DSECT CHEAD DHEAD CCYL DCYL SCNT
06 14 14 9C 9C 01
RTCNT CSTAT MODE DSTAT TERM ISTAT
F0 08 C0 B2 BD 28
CMD
56
|
|
