 |
HP OpenVMS System Management Utilities Reference
Manual
MONITOR DLOCK
The MONITOR DLOCK command initiates monitoring of the DLOCK
(distributed lock management) statistics class.
Format
MONITOR DLOCK
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The DLOCK class is useful for monitoring the lock management subsystem
in a cluster environment. The class consists of the following data
items:
| Data Item |
Description |
|
New ENQ Rate (Local)
|
Rate of new lock (ENQ) requests that originate and are performed on
this system
|
|
New ENQ Rate (Incoming)
|
Rate of new lock requests that originate on other systems and are
performed on this system
|
|
New ENQ Rate (Outgoing)
|
Rate of new lock requests that originate on this system and are
performed on another system
|
|
Converted ENQ Rate (Local)
|
Rate of lock (ENQ) conversion requests that originate and are performed
on this system
|
|
Converted ENQ Rate (Incoming)
|
Rate of lock conversion requests that originate on other systems and
are performed on this system
|
|
Converted ENQ Rate (Outgoing)
|
Rate of lock conversion requests that originate on this system and are
performed on another system
|
|
DEQ Rate (Local)
|
Rate of unlock (DEQ) requests that originate and are performed on this
system
|
|
DEQ Rate (Incoming)
|
Rate of unlock requests that originate on other systems and are
performed on this system
|
|
DEQ Rate (Outgoing)
|
Rate of unlock requests that originate on this system and are performed
on another system
|
|
Blocking AST Rate (Local)
|
Rate of lock manager blocking ASTs that originate and are performed on
this system
|
|
Blocking AST Rate (Incoming)
|
Rate of lock manager blocking ASTs that originate on other systems and
are performed on this system
|
|
Blocking AST Rate (Outgoing)
|
Rate of lock manager blocking ASTs that originate on this system and
are performed on another system
|
|
Directory Function Rate (Incoming)
|
Rate of requests for locks being managed by this node
|
|
Directory Function Rate (Outgoing)
|
Rate of requests for locks being managed by other nodes
|
|
Deadlock Message Rate
|
Rate of incoming and outgoing messages required for deadlock detection
|
Example
|
MONITOR> MONITOR DLOCK
OpenVMS Monitor Utility
DISTRIBUTED LOCK MANAGEMENT STATISTICS
on node SAMPLE
29-APR-2003 11:02:20
CUR AVE MIN MAX
New ENQ Rate (Local) 15.84 11.59 1.54 26.88
(Incoming) 1.67 2.62 0.11 25.05
(Outgoing) 0.05 0.63 0.00 5.99
Converted ENQ Rate (Local) 23.67 9.13 0.99 41.22
(Incoming) 4.48 5.71 0.00 70.19
(Outgoing) 0.00 1.43 0.00 15.90
DEQ Rate (Local) 15.86 11.58 1.64 26.68
(Incoming) 1.66 2.59 0.00 24.85
(Outgoing) 0.05 0.63 0.00 5.99
Blocking AST Rate (Local) 0.00 0.00 0.00 0.01
(Incoming) 0.00 0.00 0.00 0.00
(Outgoing) 0.00 0.00 0.00 0.00
Dir Functn Rate (Incoming) 8.00 7.33 4.66 11.00
(Outgoing) 1.00 0.77 0.00 2.66
Deadlock Message Rate 0.00 0.00 0.00 0.00
|
|
This example shows that most of the current lock management activity
occurs locally, but that, at some point during the monitoring period, a
significant amount of incoming activity occurred.
MONITOR FCP
The MONITOR FCP command initiates monitoring of the File Control
Primitive statistics class, which includes information about all
Files-11 ancillary control processes (ACPs) and extended QIO processors
(XQPs) on the local node.
Format
MONITOR FCP
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The FCP class consists of the following data items, all of which are
displayed as occurrences per second:
| Data Item |
Description |
|
FCP Call Rate
|
Rate of QIO requests received by the file system.
|
|
Allocation Rate
|
Rate of calls that caused allocation of disk space.
|
|
Create Rate
|
Rate at which new files were created.
|
|
Disk Read Rate
|
Rate of read I/O operations from disk by the file system.
|
|
Disk Write Rate
|
Rate of write I/O operations to disk by the file system.
|
|
Volume Lock Wait Rate
|
Rate of entry into a wait state due to contention for a volume
synchronization lock. Volume synchronization locks are removed by the
XQP during file creation, deletion, extension, and truncation
operations.
|
|
CPU Tick Rate
|
Rate at which CPU time was used by the file system (in 10-millisecond
ticks).
|
|
File System Page Fault Rate
|
Rate at which page faults occurred in the file system.
|
|
Window Turn Rate
|
Rate of file-map window misses.
|
|
File Lookup Rate
|
Rate of file name lookup operations in file directories.
|
|
File Open Rate
|
Rate at which files were opened.
|
|
Erase Rate
|
Rate of erase operations issued by the file system.
|
Example
|
MONITOR> MONITOR /INTERVAL=10 FCP
OpenVMS Monitor Utility
FILE PRIMITIVE STATISTICS
on node SAMPLE
29-APR-2003 16:13:38
CUR AVE MIN MAX
FCP Call Rate 4.62 3.80 0.33 7.61
Allocation Rate 0.99 0.24 0.00 0.99
Create Rate 2.31 0.57 0.00 2.31
Disk Read Rate 1.98 2.48 0.33 6.95
Disk Write Rate 3.30 2.39 0.33 5.62
Volume Lock Wait Rate 4.62 3.06 0.00 6.95
CPU Tick Rate 3.63 3.88 0.33 10.26
File Sys Page Fault Rate 0.00 0.00 0.00 0.00
Window Turn Rate 1.98 0.99 0.00 1.98
File Lookup Rate 0.33 1.40 0.00 4.63
File Open Rate 2.00 3.54 2.00 5.10
Erase Rate 0.00 0.00 0.00 0.00
|
|
This example shows that the rate of files opened during the last
10-second collection interval was 2.0 (for a total of 20). The average
rate since the MONITOR command was entered is 3.54; the highest rate
achieved during any 10-second interval is 5.10, and the lowest rate of
2.0 occurred during the last interval.
MONITOR FILE_SYSTEM_CACHE
The MONITOR FILE_SYSTEM_CACHE command initiates monitoring of the
FILE_SYSTEM_CACHE statistics class.
Format
MONITOR FILE_SYSTEM_CACHE
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The FILE_SYSTEM_CACHE class includes the following data items:
| Data Item |
Description |
|
Directory FCB Hit%
|
Percentage of directory file control block hits on the directory cache.
The percentage value shown is the ratio of hits to the sum of hits plus
misses.
|
|
Directory FCB Attempt Rate
|
Rate at which attempts were made to find directory file control blocks
in the directory cache.
|
|
Directory Data Hit%
|
Percentage of directory data hits on the directory cache. The
percentage value shown is the ratio of hits to the sum of hits plus
misses.
|
|
Directory Data Attempt Rate
|
Rate at which attempts were made to find directory data in the
directory cache.
|
|
File Header Hit%
|
Percentage of file header hits on the file header cache. The percentage
value shown is the ratio of hits to the sum of hits plus misses.
|
|
File Header Attempt Rate
|
Rate at which attempts were made to find file headers in the file
header cache.
|
|
File ID Hit%
|
Percentage of file identifier hits on the file ID cache. The percentage
value shown is the ratio of hits to the sum of hits plus misses.
|
|
File ID Cache Attempt Rate
|
Rate at which attempts were made to find file identifiers in the file
ID cache.
|
|
Extent Cache Hit%
|
Percentage of appropriate size extent hits on the extent cache. The
percentage value shown is the ratio of hits to the sum of hits plus
misses.
|
|
Extent Cache Attempt Rate
|
Rate at which attempts were made to find appropriate size extents in
the extent cache.
|
|
Quota Cache Hit%
|
Percentage of quota entry hits on the quota cache. The percentage value
shown is the ratio of hits to the sum of hits plus misses.
|
|
Quota Cache Attempt Rate
|
Rate at which attempts were made to find entries in the quota cache.
|
|
Bitmap Cache Hit%
|
Percentage of entry hits on the bitmap cache. The percentage value
shown is the ratio of hits to the sum of hits plus misses.
|
|
Bitmap Cache Attempt Rate
|
Rate at which attempts were made to find entries in the bitmap cache.
|
Note that all items shown in the FILE_SYSTEM_CACHE display except Dir
FCB apply only to XQPs. The Dir FCB item applies to both XQPs and the
ODS-1 ACP.
Example
|
MONITOR> MONITOR FILE_SYSTEM_CACHE
OpenVMS Monitor Utility
FILE SYSTEM CACHING STATISTICS
on node SAMPLE
29-APR-2003 13:08:53
CUR AVE MIN MAX
Dir FCB (Hit %) 100.00 100.00 0.00 100.00
(Attempt Rate) 1.66 0.49 0.00 1.66
Dir Data (Hit %) 100.00 100.00 0.00 100.00
(Attempt Rate) 4.66 1.24 0.00 4.66
File Hdr (Hit %) 66.00 80.00 0.00 100.00
(Attempt Rate) 1.00 0.41 0.00 1.00
File ID (Hit %) 0.00 0.00 0.00 0.00
(Attempt Rate) 0.00 0.00 0.00 0.00
Extent (Hit %) 0.00 100.00 0.00 100.00
(Attempt Rate) 0.00 0.24 0.00 1.00
Quota (Hit %) 0.00 100.00 0.00 100.00
(Attempt Rate) 0.00 0.16 0.00 0.66
Bitmap (Hit %) 0.00 0.00 0.00 0.00
(Attempt Rate) 0.00 0.00 0.00 0.00
|
|
The cache hits and misses reflect the effectiveness of file system
caching. Generally, the size of the cache affects the hit rate. The
Attempt Rate is the sum of hits plus misses; the Hit% is the percentage
of attempts that were successful.
Unlike other MONITOR data items, the averages for the hit percentages
are not calculated based on previous hit percentages. Instead, these
values are calculated based on the total number of hits and the total
number of attempts on a cache since the beginning of the Monitor
request. This provides more accurate average values for the hit
percentage items.
The directory FCB cache is checked whenever a
directory lookup is performed. Directory lookups can be performed on
file open, creation, deletion, extension, or truncation. If the file
control block associated with the directory is found in the cache, a
hit is recorded. Otherwise, a miss is recorded. Both hits and misses
are counted as attempts.
The directory data cache is checked whenever a file
lookup is performed. Directory lookups may be performed on file open,
creation, deletion, extension, or truncation. If an entry for the file
being accessed is found in the directory data cache, a hit is recorded.
Otherwise, a miss is recorded. Both hits and misses are counted as
attempts.
The file header cache is checked on file open, close,
creation, deletion, extension, or truncation. If the file header for
the file being accessed is found in the file header cache, a hit is
recorded. Otherwise, a miss is recorded. Both hits and misses are
counted as attempts.
The file identification cache is a list of file
identifiers that are removed on file creation and returned on file
deletion. The File ID hits indicate file numbers successfully removed
or returned to the file ID cache. Otherwise, a miss is recorded. Both
hits and misses are counted as attempts.
The extent cache is checked on file creation,
deletion, extension, and truncation. An attempt is made to allocate
space from the extent cache during file creation or extension. During
file creation, if sufficient size is found, a hit is recorded. If the
desired size is not found, or an entry is forced to be split, an
attempt is recorded. During file deletion, if the blocks were returned
to the cache without the extent cache becoming too large, a hit is
recorded. Otherwise, a miss is recorded. Both hits and misses are
counted as attempts.
If quota checking is enabled, the quota cache is
checked on file creation, deletion, extension, and truncation. If the
desired entry (the identifier matching that of the requester) is found
in the quota cache, a hit is recorded. Otherwise, a miss is recorded.
Both hits and misses are counted as attempts.
The bitmap cache contains blocks from the storage
bitmap file. This cache is accessed when the extent cache cannot
satisfy requests for disk space. High rates indicate fragmented volumes.
Data items in the FILE_SYSTEM_CACHE display correspond to SYSGEN
ACP/XQP parameters, as follows:
| FILE_SYSTEM_CACHE Item |
ACP/XQP Parameters |
|
Dir FCB
|
ACP_SYSACC
|
|
|
ACP_DINDXCACHE
|
|
Dir Data
|
ACP_DIRCACHE
|
|
File Hdr
|
ACP_HDRCACHE
|
|
File ID
|
ACP_FIDCACHE
|
|
Extent
|
ACP_EXTCACHE
|
|
|
ACP_EXTLIMIT
|
|
Quota
|
ACP_QUOCACHE
|
|
Bitmap
|
ACP_MAPCACHE
|
When you change the ACP/XQP cache parameters, remember to reboot the
system to make the changes effective. For more information about these
parameters, refer to Appendix J.
MONITOR IO
The MONITOR IO command initiates monitoring of the I/O class.
Format
MONITOR IO
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The IO class includes the following data items:
| Data Item |
Description |
|
Direct I/O Rate
|
Rate of direct I/O (for example, disk and tape) operations
|
|
Buffered I/O Rate
|
Rate of buffered I/O (for example, terminal and line printer) operations
|
|
Mailbox Write Rate
|
Rate of write-to-mailbox requests received by the system
|
|
Split Transfer Rate
|
Rate at which transfers were split into multiple I/Os
|
|
Log Name Translation Rate
|
Rate of logical name translations
|
|
File Open Rate
|
Rate at which files were opened
|
|
Page Fault Rate
|
Rate of occurrence of page faults for all working sets
|
|
Page Read Rate
|
Rate of pages read from disk as a result of page faults
|
|
Page Read I/O Rate
|
Rate of read I/O operations from disk as a result of page faults
|
|
Page Write Rate
|
Rate of pages written to the page file
|
|
Page Write I/O Rate
|
Rate of write I/O operations to the page file
|
|
Inswap Rate
|
Rate at which working sets were read into memory from the swap file
|
|
Free List Size
|
Number of pages on the free page list
|
|
Modified List Size
|
Number of pages on the modified page list
|
Example
|
MONITOR> MONITOR /RECORD IO
OpenVMS Monitor Utility
I/O SYSTEM STATISTICS
on node SAMPLE
29-APR-2003 22:22:44
CUR AVE MIN MAX
Direct I/O Rate 15.33 4.46 0.33 15.33
Buffered I/O Rate 24.91 47.47 24.91 69.00
Mailbox Write Rate 0.00 0.45 0.00 2.95
Split Transfer Rate 1.66 1.56 0.33 3.97
Log Name Translation Rate 13.28 10.75 3.66 27.66
File Open Rate 1.66 1.26 0.33 2.98
Page Fault Rate 24.58 52.31 17.33 178.00
Page Read Rate 12.29 9.00 0.00 26.88
Page Read I/O Rate 2.65 2.43 0.00 6.22
Page Write Rate 0.00 6.69 0.00 58.66
Page Write I/O Rate 0.00 0.27 0.00 1.66
Inswap Rate 0.00 0.00 0.00 0.00
Free List Size 3621.00 3604.09 3392.00 3771.00
Modified List Size 49.00 73.36 4.00 181.00
RECORDING
|
|
This example shows that the direct I/O rate is currently at its highest
level since the MONITOR command was entered and is significantly higher
than the average rate. Termination of this command by Ctrl/C and entry
of a MONITOR PROCESSES/TOPDIO command would show the top users of
direct I/Os. Note that if I/O monitoring is begun at a later time, a
new MONITOR request is defined. That is, it is not a continuation of
the original request; the average, minimum, and maximum statistics are
reinitialized. However, because the original request specified
recording, that data can be played back for redisplay or summarization.
|
