HP OpenVMS Systems Documentation

HP OpenVMS DCL Dictionary

F$SETPRV

Enables or disables specified user privileges. The F$SETPRV function returns a list of keywords indicating user privileges; this list shows the status of the specified privileges before F$SETPRV was executed.
Your process must be authorized to set the specified privilege.
For detailed information on privilege restrictions, refer to the description of the $SETPRV system service in the HP OpenVMS System Services Reference Manual.

Format

F$SETPRV (priv-states)

Return Value

A character string containing keywords for the current process privileges before they were changed by the F$SETPRV function.

Argument

priv-states
Specifies a character string defining a privilege, or a list of privileges separated by commas (,).
For a list of process privileges, refer to the OpenVMS User's Manual.

Description

The lexical function F$SETPRV invokes the $SETPRV system service to enable or disable specified user privileges. The F$SETPRV function returns a list of keywords indicating user privileges; this list shows the status of the specified privileges before F$SETPRV was executed.
The F$SETPRV function returns keywords for your current privileges, whether or not you are authorized to change the privileges listed in the priv-states argument; however, the F$SETPRV function enables or disables only the privileges you are authorized to change.
When you run programs or execute procedures that include the F$SETPRV function, be sure that F$SETPRV restores your process to its proper privileged state. For additional information, refer to the examples that follow.

Examples

#1
$ OLDPRIV = F$SETPRV("OPER,NOTMPMBX") $ SHOW SYMBOL OLDPRIV OLDPRIV = "NOOPER,TMPMBX"

In this example, the process is authorized to change the OPER (operator) and TMPMBX (temporary mailbox) privileges. The F$SETPRV function enables the OPER privilege and disables the TMPMBX privilege. In addition, the F$SETPRV function returns the keywords NOOPER and TMPMBX, showing the state of these privileges before they were changed.
You must place quotation marks (" ") around the list of privilege keywords because it is a string literal.

$ SHOW PROCESS/PRIVILEGE

05-JUN-2001 15:55:09.60   RTA1:              User: HELRIEGEL

Process privileges:

Process rights identifiers:
 INTERACTIVE
 LOCAL
$ NEWPRIVS = F$SETPRV("ALL, NOOPER")
$ SHOW SYMBOL NEWPRIVS
  NEWPRIVS = "NOCMKRNL,NOCMEXEC,NOSYSNAM,NOGRPNAM,NOALLSPOOL,
      NOIMPERSONATE,NODIAGNOSE,NOLOG_IO,NOGROUP,NOACNT,NOPRMCEB,
      NOPRMMBX,NOPSWAPM,NOALTPRI,NOSETPRV,NOTMPMBX,NOWORLD,NOMOUNT,
      NOOPER,NOEXQUOTA,NONETMBX,NOVOLPRO,NOPHY_IO,NOBUGCHK,NOPRMGBL,
      NOSYSGBL,NOPFNMAP,NOSHMEM,NOSYSPRV,NOBYPASS,NOSYSLCK,NOSHARE,
      NOUPGRADE,NODOWNGRADE,NOGRPPRV,NOREADALL,NOSECURITY,OPER"
$ SHOW PROCESS/PRIVILEGE

05-JUN-2001 10:21:18.32   User: INAZU      Process ID: 00000F24
                          Node: TOKNOW     Process name: "_FTA23:"

Authorized privileges:
 NETMBX    SETPRV    SYSPRV    TMPMBX

Process privileges:
 ACNT                 may suppress accounting messages
 ALLSPOOL             may allocate spooled device
 ALTPRI               may set any priority value
 AUDIT                may direct audit to system security audit log
 BUGCHK               may make bug check log entries
 BYPASS               may bypass all object access controls
 CMEXEC               may change mode to exec
 CMKRNL               may change mode to kernel
 DIAGNOSE             may diagnose devices
 DOWNGRADE            may downgrade object secrecy
 EXQUOTA              may exceed disk quota
 GROUP                may affect other processes in same group
 GRPNAM               may insert in group logical name table
 GRPPRV               may access group objects via system protection
 IMPERSONATE          may impersonate another user
 IMPORT               may set classification for unlabeled object
 LOG_IO               may do logical i/o
 MOUNT                may execute mount acp function
 NETMBX               may create network device
 OPER                 may perform operator functions
 PFNMAP               may map to specific physical pages
 PHY_IO               may do physical i/o
 PRMCEB               may create permanent common event clusters
 PRMGBL               may create permanent global sections
 PRMMBX               may create permanent mailbox
 PSWAPM               may change process swap mode
 READALL              may read anything as the owner
 SECURITY             may perform security administration functions
 SETPRV               may set any privilege bit
 SHARE                may assign channels to non-shared devices
 SHMEM                may create/delete objects in shared memory
 SYSGBL               may create system wide global sections
 SYSLCK               may lock system wide resources
 SYSNAM               may insert in system logical name table
 SYSPRV               may access objects via system protection
 TMPMBX               may create temporary mailbox
 UPGRADE              may upgrade object integrity
 VOLPRO               may override volume protection
 WORLD                may affect other processes in the world

Process rights:
 INTERACTIVE
 LOCAL

System rights:
 SYS$NODE_TOKNOW

$ NEWPRIVS = F$SETPRV(NEWPRIVS)
$ SHOW PROCESS/PRIVILEGE

05-JUN-2001 16:05:07.23   RTA1:              User: JERROM

Process privileges:
 OPER                 operator privilege

Process rights identifiers:
 INTERACTIVE
 LOCAL

In this example, the DCL command SHOW PROCESS/PRIVILEGE is used to determine the current process privileges. Note that the process has no privileges enabled.
The F$SETPRV function is then used to process the ALL keyword and enable all privileges recording the previous state of each privilege in the symbol NEWPRIVS. Next, F$SETPRV processes the NOOPER keyword and disables the OPER (operator) privilege, recording the previous state of OPER in NEWPRIVS. Note that the OPER privilege appears in the returned string twice: first as NOOPER and then as OPER.
Entering the command SHOW PROCESS/PRIVILEGE now shows that the current process has all privileges enabled except OPER.
If the returned string is used as the parameter to F$SETPRV, the process has the OPER privilege enabled. This occurs because the OPER command was present twice in the symbol NEWPRIVS. As a result, F$SETPRV looked at the first keyword NOOPER and disabled the privilege. Finally, after processing several other keywords in the NEWPRIVS string, the OPER keyword is presented, allowing F$SETPRV to enable the OPER privilege.
If you are using the ALL or NOALL keywords to save your current privilege environment, HP recommends that you perform the following procedure to modify the process for a command procedure:
$ CURRENT_PRIVS = F$SETPRV("ALL") $ TEMP = F$SETPRV("NOOPER")
If you use this procedure, you can then specify the following command statement at the end of your command procedure so that the original privilege environment is restored:
$ TEMP = F$SETPRV(CURRENT_PRIVS)

#3
$ SAVPRIV = F$SETPRV("NOGROUP") $ SHOW SYMBOL SAVPRIV SAVPRIV = "GROUP" $ TEST = F$PRIVILEGE("GROUP") $ SHOW SYMBOL TEST TEST = "TRUE"

In this example, the process is not authorized to change the GROUP privilege; however, the F$SETPRV function still returns the current setting for the GROUP privilege.
The F$PRIVILEGE function is used to see whether the process has GROUP privilege. The return string, TRUE, indicates that the process has GROUP privilege, even though the F$SETPRV function attempted to disable the privilege.

$ SHOW PROCESS/PRIVILEGE

05-JUN-2001 15:55:09.60   RTA1:              User: KASER

Process privileges:
 AUDIT                may direct audit to system security audit log
 DOWNGRADE            may downgrade object secrecy
 IMPORT               may set classification for unlabeled object
 UPDATE

These process privileges are VAX specific and are used only in Security Enhancement Service Software (SEVMS) on an OpenVMS VAX system.

Contents

Index