 |
HP OpenVMS DCL Dictionary
SHOW NETWORK
Displays information about network services registered on a node.
Format
SHOW NETWORK [network-service]
Parameter
network-service
Specifies a network service for which you want to display information.
If you do not specify a service, the SHOW NETWORK command displays
information about all services that are currently registered on the
local node.
Description
The SHOW NETWORK command displays information about network services
available on an OpenVMS system.
Qualifiers
/FULL
Displays all the information for the specified network service.
/OLD
If you are running DECnet Phase IV, retains the behavior of the SHOW
NETWORK command prior to OpenVMS Version 7.0. If the local node is a
routing node, the /OLD qualifier provides routing information.
/OUTPUT[=filespec]
/NOOUTPUT
Controls where the output of the command is sent. By default, the
output of the SHOW NETWORK command is sent to the current SYS$OUTPUT
device (usually your terminal).
The asterisk (*) and the percent sign (%) wildcard characters are not
allowed in the file specification.
If you enter the /NOOUTPUT qualifier, output is suppressed.
Examples
| #1 |
$ SHOW NETWORK
Product: DECNET Node: VADIR Address(es): 24.365
Product: TCP/IP Node: vadir.lkr.dec.com Address(es): 161.114.99.17
|
This command was executed on a system running DECnet Phase V and
TCP/IP. It indicates that the DECNET and "TCP/IP" network-service
parameters are valid for this system.
| #2 |
$ SHOW NETWORK "TCP/IP"
Product: TCP/IP Node: vadir.lkr.dec.com Address(es): 161.114.99.17
|
When the TCP/IP network-service parameter is used, it must be enclosed
in enclosed in quotes because it contains a slash.
| #3 |
$ SHOW NETWORK/FULL DECNET
Product: DECNET Manufacturer: Digital Equipment Corporation
Node: EMARET Address(es): 12.378
Network Type: DNA IV Interface(s): net 0
Node Volatile Characteristics as of 16-JAN-2002 14:46:21
Executor node = 12.378 (EMARET)
Identification = DECnet for OpenVMS VAX V7.1
Management version = V4.0.0
Incoming timer = 45
Outgoing timer = 60
Incoming Proxy = Enabled
Outgoing Proxy = Enabled
NSP version = V4.1.0
Maximum links = 32
Delay factor = 80
Delay weight = 5
Inactivity timer = 60
Retransmit factor = 10
Routing version = V2.0.0
Type = nonrouting IV
Routing timer = 600
Broadcast routing timer = 180
Maximum address = 1023
Maximum circuits = 16
Maximum cost = 1022
Maximum hops = 30
Maximum visits = 63
Maximum area = 63
Max broadcast nonrouters = 64
Max broadcast routers = 32
Maximum path splits = 1
Area maximum cost = 1022
Area maximum hops = 30
Maximum buffers = 100
Buffer size = 576
Default access = incoming and outgoing
Pipeline quota = 4032
Alias maximum links = 32
Path split policy = Normal
Maximum Declared Objects = 31
Known Link Volatile Summary as of 16-JAN-2002 14:46:23
Link Node PID Process Remote link Remote user
8345 4.283 (BKLS09) 0000021C SLS$TAPMGRRQ 566 SLS$DB
8347 24.18 (BULEAA) 00000213 REMACP 553 ABERDALE
Node Counters as of 16-JAN-2002 14:46:23
Executor node = 12.378 (EMARET)
4 Maximum logical links active
0 Aged packet loss
0 Node unreachable packet loss
0 Node out-of-range packet loss
0 Oversized packet loss
0 Packet format error
0 Partial routing update loss
0 Verification reject
|
The DECNET network-service parameter is used to signify either DECnet
Phase IV or DECnet Phase V. Use the /FULL qualifier to if you want to
determine what DECnet phase the node is running. This is an example
from a system running DECnet Phase IV.
| #4 |
$ SHOW NETWORK/FULL DECNET
Product: DECNET Manufacturer: Digital Equipment Corporation
Node: VADIR Address(es): 24.365
Network Type: DNA V Interface(s): net 0
Node 0
at 2002-01-16-12:50:30.528-05:00Iinf
Identifiers
Name = DEC:.XPR.VADIR
Address =
{
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-6D-61:21 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-12-60:21 (DEC:.XPR.BULEAA) ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV2 , number = 19 ] ,
[ DNA_OSItransportV1 , 'DEC0'H ] ,
[ DNA_IP , 161.114.99.17 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_NSP ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-6D-61:20 ]
) ,
(
[ DNA_CMIP-MICE ] ,
[ DNA_SessionControlV3 , number = 19 ] ,
[ DNA_NSP ] ,
[ DNA_OSInetwork , 49::00-18:AA-00-04-00-12-60:20 (DEC:.XPR.BULEAA) ]
)
}
Status
UID = 562B4000-43CF-11CF-8001-AA0004007E10
State = On
Functions Enabled =
{
Address Watcher ,
CMIP Listener
}
ID = 00-00-F8-01-FD-62
Characteristics
Version = T5.0.3
Implementation =
{
[
Name = OpenVMS AXP ,
Version = "V7.2-1 "
] ,
[
Name = HP DECnet-Plus for OpenVMS ,
Version = "V7.2-1 ECO03 31-MAY-2001 16:54:53.36"
]
}
Script Location = <Default value>
Maximum Listeners = 0
Listener Template = <Default value>
Secondary Names =
{
}
|
This example is from a system running DECnet Phase V. The output has
been truncated.
| #5 |
$ SHOW NETWORK/OLD
OpenVMS Network status for local node 12.378 EMARET on 16-JAN-2002 14:46:35.64
This is a nonrouting node, and does not have any network information.
The designated router for EMARET is node 12.1023 A12LKR.
|
The /OLD qualifier can be used only on a system running DECnet Phase IV.
|
