DESCRIPTION

The EVP cipher routines are a high level interface to certain symmetric ciphers.

EVP_CIPHER_CTX_init() initializes cipher contex ctx.

EVP_EncryptInit_ex() sets up cipher context ctx for encryption with cipher type from ENGINE impl. ctx must be initialized before calling this function. type is normally supplied by a function such as EVP_des_cbc(). If impl is NULL then the default implementation is used. key is the symmetric key to use and iv is the IV to use (if necessary), the actual number of bytes used for the key and IV depends on the cipher. It is possible to set all parameters to NULL except type in an initial call and supply the remaining parameters in subsequent calls, all of which have type set to NULL. This is done when the default cipher parameters are not appropriate.

EVP_EncryptUpdate() encrypts inl bytes from the buffer in and writes the encrypted version to out. This function can be called multiple times to encrypt successive blocks of data. The amount of data written depends on the block alignment of the encrypted data: as a result the amount of data written may be anything from zero bytes to (inl + cipher_block_size - 1) so outl should contain sufficient room. The actual number of bytes written is placed in outl.

If padding is enabled (the default) then EVP_EncryptFinal_ex() encrypts the "final" data, that is any data that remains in a partial block. It uses standard block padding (aka PKCS padding). The encrypted final data is written to out which should have sufficient space for one cipher block. The number of bytes written is placed in outl. After this function is called the encryption operation is finished and no further calls to EVP_EncryptUpdate() should be made.

If padding is disabled then EVP_EncryptFinal_ex() will not encrypt any more data and it will return an error if any data remains in a partial block: that is if the total data length is not a multiple of the block size.

EVP_DecryptInit_ex(), EVP_DecryptUpdate() and EVP_DecryptFinal_ex() are the corresponding decryption operations. EVP_DecryptFinal() will return an error code if padding is enabled and the final block is not correctly formatted. The parameters and restrictions are identical to the encryption operations except that if padding is enabled the decrypted data buffer out passed to EVP_DecryptUpdate() should have sufficient room for (inl + cipher_block_size) bytes unless the cipher block size is 1 in which case inl bytes is sufficient.

EVP_CipherInit_ex(), EVP_CipherUpdate() and EVP_CipherFinal_ex() are functions that can be used for decryption or encryption. The operation performed depends on the value of the enc parameter. It should be set to 1 for encryption, 0 for decryption and -1 to leave the value unchanged (the actual value of 'enc' being supplied in a previous call).

EVP_CIPHER_CTX_cleanup() clears all information from a cipher context and free up any allocated memory associate with it. It should be called after all operations using a cipher are complete so sensitive information does not remain in memory.

EVP_EncryptInit(), EVP_DecryptInit() and EVP_CipherInit() behave in a similar way to EVP_EncryptInit_ex(), EVP_DecryptInit_ex and EVP_CipherInit_ex() except the ctx paramter does not need to be initialized and they always use the default cipher implementation.

EVP_EncryptFinal(), EVP_DecryptFinal() and EVP_CipherFinal() behave in a similar way to EVP_EncryptFinal_ex(), EVP_DecryptFinal_ex() and EVP_CipherFinal_ex() except ctx is automatically cleaned up after the call.

EVP_get_cipherbyname(), EVP_get_cipherbynid() and EVP_get_cipherbyobj() return an EVP_CIPHER structure when passed a cipher name, a NID or an ASN1_OBJECT structure.

EVP_CIPHER_nid() and EVP_CIPHER_CTX_nid() return the NID of a cipher when passed an EVP_CIPHER or EVP_CIPHER_CTX structure. The actual NID value is an internal value which may not have a corresponding OBJECT IDENTIFIER.

EVP_CIPHER_CTX_set_padding() enables or disables padding. By default encryption operations are padded using standard block padding and the padding is checked and removed when decrypting. If the pad parameter is zero then no padding is performed, the total amount of data encrypted or decrypted must then be a multiple of the block size or an error will occur.

EVP_CIPHER_key_length() and EVP_CIPHER_CTX_key_length() return the key length of a cipher when passed an EVP_CIPHER or EVP_CIPHER_CTX structure. The constant EVP_MAX_KEY_LENGTH is the maximum key length for all ciphers. Note: although EVP_CIPHER_key_length() is fixed for a given cipher, the value of EVP_CIPHER_CTX_key_length() may be different for variable key length ciphers.

EVP_CIPHER_CTX_set_key_length() sets the Akey length of the cipher ctx. If the cipher is a fixed length cipher then attempting to set the key length to any value other than the fixed value is an error.

EVP_CIPHER_iv_length() and EVP_CIPHER_CTX_iv_length() return the IV length of a cipher when passed an EVP_CIPHER or EVP_CIPHER_CTX. It will return zero if the cipher does not use an IV. The constant EVP_MAX_IV_LENGTH is the maximum IV length for all ciphers.

EVP_CIPHER_block_size() and EVP_CIPHER_CTX_block_size() return the block size of a cipher when passed an EVP_CIPHER or EVP_CIPHER_CTX structure. The constant EVP_MAX_IV_LENGTH is also the maximum block length for all ciphers.

EVP_CIPHER_type() and EVP_CIPHER_CTX_type() return the type of the passed cipher or context. This "type" is the actual NID of the cipher OBJECT IDENTIFIER as such it ignores the cipher parameters and 40 bit RC2 and 128 bit RC2 have the same NID. If the cipher does not have an object identifier or does not have ASN1 support this function will return NID_undef.

EVP_CIPHER_CTX_cipher() returns the EVP_CIPHER structure when passed an EVP_CIPHER_CTX structure.

EVP_CIPHER_mode() and EVP_CIPHER_CTX_mode() return the block cipher mode: EVP_CIPH_ECB_MODE, EVP_CIPH_CBC_MODE, EVP_CIPH_CFB_MODE or EVP_CIPH_OFB_MODE. If the cipher is a stream cipher then EVP_CIPH_STREAM_CIPHER is returned.

EVP_CIPHER_param_to_asn1() sets the AlgorithmIdentifier "parameter" based on the passed cipher. This will typically include any parameters and an IV. The cipher IV (if any) must be set when this call is made. This call should be made before the cipher is actually "used" (before any EVP_EncryptUpdate(), EVP_DecryptUpdate() calls for example). This function may fail if the cipher does not have any ASN1 support.

EVP_CIPHER_asn1_to_param() sets the cipher parameters based on an ASN1 AlgorithmIdentifier "parameter". The precise effect depends on the cipher In the case of RC2, for example, it will set the IV and effective key length. This function should be called after the base cipher type is set but before the key is set. For example EVP_CipherInit() will be called with the IV and key set to NULL, EVP_CIPHER_asn1_to_param() will be called and finally EVP_CipherInit() again with all parameters except the key set to NULL. It is possible for this function to fail if the cipher does not have any ASN1 support or the parameters cannot be set (for example the RC2 effective key length is not supported.

EVP_CIPHER_CTX_ctrl() allows various cipher specific parameters to be determined and set. Currently only the RC2 effective key length and the number of rounds of RC5 can be set.

RETURN VALUES

EVP_CIPHER_CTX_init, EVP_EncryptInit_ex(), EVP_EncryptUpdate() and EVP_EncryptFinal_ex() return 1 for success and 0 for failure.

EVP_DecryptInit_ex() and EVP_DecryptUpdate() return 1 for success and 0 for failure. EVP_DecryptFinal_ex() returns 0 if the decrypt failed or 1 for success.

EVP_CipherInit_ex() and EVP_CipherUpdate() return 1 for success and 0 for failure. EVP_CipherFinal_ex() returns 0 for a decryption failure or 1 for success.

EVP_CIPHER_CTX_cleanup() returns 1 for success and 0 for failure.

EVP_get_cipherbyname(), EVP_get_cipherbynid() and EVP_get_cipherbyobj() return an EVP_CIPHER structure or NULL on error.

EVP_CIPHER_nid() and EVP_CIPHER_CTX_nid() return a NID.

EVP_CIPHER_block_size() and EVP_CIPHER_CTX_block_size() return the block size.

EVP_CIPHER_key_length() and EVP_CIPHER_CTX_key_length() return the key length.

EVP_CIPHER_CTX_set_padding() always returns 1.

EVP_CIPHER_iv_length() and EVP_CIPHER_CTX_iv_length() return the IV length or zero if the cipher does not use an IV.

EVP_CIPHER_type() and EVP_CIPHER_CTX_type() return the NID of the cipher's OBJECT IDENTIFIER or NID_undef if it has no defined OBJECT IDENTIFIER.

EVP_CIPHER_CTX_cipher() returns an EVP_CIPHER structure.

EVP_CIPHER_param_to_asn1() and EVP_CIPHER_asn1_to_param() return 1 for success or zero for failure.

CIPHER LISTING

All algorithms have a fixed key length unless otherwise stated.

NOTES

Where possible the EVP interface to symmetric ciphers should be used in preference to the low level interfaces. This is because the code then becomes transparent to the cipher used and much more flexible.

PKCS padding works by adding n padding bytes of value n to make the total length of the encrypted data a multiple of the block size. Padding is always added so if the data is already a multiple of the block size n will equal the block size. For example if the block size is 8 and 11 bytes are to be encrypted then 5 padding bytes of value 5 will be added.

When decrypting the final block is checked to see if it has the correct form.

Although the decryption operation can produce an error if padding is enabled, it is not a strong test that the input data or key is correct. A random block has better than 1 in 256 chance of being of the correct format and problems with the input data earlier on will not produce a final decrypt error.

If padding is disabled then the decryption operation will always succeed if the total amount of data decrypted is a multiple of the block size.

The functions EVP_EncryptInit(), EVP_EncryptFinal(), EVP_DecryptInit(), EVP_CipherInit() and EVP_CipherFinal() are obsolete but are retained for compatibility with existing code. New code should use EVP_EncryptInit_ex(), EVP_EncryptFinal_ex(), EVP_DecryptInit_ex(), EVP_DecryptFinal_ex(), EVP_CipherInit_ex() and EVP_CipherFinal_ex() because they can reuse an existing context without allocating and freeing it up on each call.

Restrictions

For RC5 the number of rounds can currently only be set to 8, 12 or 16. This is a limitation of the current RC5 code rather than the EVP interface.

EVP_MAX_KEY_LENGTH and EVP_MAX_IV_LENGTH only refer to the internal ciphers with default key lengths. If custom ciphers exceed these values the results are unpredictable. This is because it has become standard practice to define a generic key as a fixed unsigned char array containing EVP_MAX_KEY_LENGTH bytes.

The ASN1 code is incomplete (and sometimes inaccurate) it has only been tested for certain common S/MIME ciphers (RC2, DES, triple DES) in CBC mode.

EXAMPLES

Get the number of rounds used in RC5:

 int nrounds;
 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GET_RC5_ROUNDS, 0, &nrounds);

Get the RC2 effective key length:

 int key_bits;
 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GET_RC2_KEY_BITS, 0, &key_bits);

Set the number of rounds used in RC5:

 int nrounds;
 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_SET_RC5_ROUNDS, nrounds, NULL);

Set the effective key length used in RC2:

 int key_bits;
 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_SET_RC2_KEY_BITS, key_bits, NULL);

Encrypt a string using blowfish:

 int do_crypt(char *outfile)
        {
   unsigned char outbuf[1024];
 int outlen, tmplen;
 /* Bogus key and IV: we'd normally set these from
    * another source.
   */
 unsigned char key[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};
      unsigned char iv[] = {1,2,3,4,5,6,7,8};
     char intext[] = "Some Crypto Text";
 EVP_CIPHER_CTX ctx;
 FILE *out;½
    EVP_CIPHER_CTX_init(&ctx);
      EVP_EncryptInit_ex(&ctx, EVP_bf_cbc(), NULL, key, iv);
 
     if(!EVP_EncryptUpdate(&ctx, outbuf, &outlen, intext, strlen(intext)))
               {
           /* Error */
         return 0;
           }
   /* Buffer passed to EVP_EncryptFinal() must be after data just
       * encrypted to avoid overwriting it.
        */
 if(!EVP_EncryptFinal_ex(&ctx, outbuf + outlen, &tmplen))
            {
           /* Error */
         return 0;
           }
   outlen += tmplen;
   EVP_CIPHER_CTX_cleanup(&ctx);
   /* Need binary mode for fopen because encrypted data is
      * binary data. Also cannot use strlen() on it because
         * it wont be null terminated and may contain embedded
     * nulls.
    */
 out = fopen(outfile, "wb");
 fwrite(outbuf, 1, outlen, out);
     fclose(out);
        return 1;
   }

The ciphertext from the above example can be decrypted using the openssl utility with the command line:

S<openssl bf -in cipher.bin -K 000102030405060708090A0B0C0D0E0F -iv 0102030405060708 -d> 

General encryption, decryption function example using FILE I/O and RC2 with an 80 bit key:

 int do_crypt(FILE *in, FILE *out, int do_encrypt)
       {
   /* Allow enough space in output buffer for additional block */
      inbuf[1024], outbuf[1024 + EVP_MAX_BLOCK_LENGTH];
   int inlen, outlen;
  /* Bogus key and IV: we'd normally set these from
    * another source.
   */
 unsigned char key[] = "0123456789";
 unsigned char iv[] = "12345678";
    /* Don't set key or IV because we will modify the parameters */
     EVP_CIPHER_CTX_init(&ctx);
      EVP_CipherInit_ex(&ctx, EVP_rc2(), NULL, NULL, NULL, do_encrypt);
       EVP_CIPHER_CTX_set_key_length(&ctx, 10);
        /* We finished modifying parameters so now we can set key and IV */
 EVP_CipherInit_ex(&ctx, NULL, NULL, key, iv, do_encrypt);
 
  for(;;) 
            {
           inlen = fread(inbuf, 1, 1024, in);
          if(inlen <= 0) break;
            if(!EVP_CipherUpdate(&ctx, outbuf, &outlen, inbuf, inlen))
                  {
                   /* Error */
                 return 0;
                   }
           fwrite(outbuf, 1, outlen, out);
             }
   if(!EVP_CipherFinal_ex(&ctx, outbuf, &outlen))
              {
           /* Error */
         return 0;
           }
   fwrite(outbuf, 1, outlen, out);
 
        EVP_CIPHER_CTX_cleanup(&ctx);
   return 1;
   }

SEE ALSO

evp(3)

HISTORY

EVP_CIPHER_CTX_init(), EVP_EncryptInit_ex(), EVP_EncryptFinal_ex(), EVP_DecryptInit_ex(), EVP_DecryptFinal_ex(), EVP_CipherInit_ex(), EVP_CipherFinal_ex() and EVP_CIPHER_CTX_set_padding() appeared in OpenSSL 0.9.7.