HP OpenVMS Systems Documentation |
HP OpenVMS System Management Utilities Reference Manual
Uppercase and lowercase characters are equivalent. All lowercase characters are converted to uppercase before the password is encrypted. Avoid using the word password as the actual password. Use the /PASSWORD qualifier as follows:
When you modify a password, the new password expires automatically; it is valid only once (unless you specify /NOPWDEXPIRED). On login, the user is forced to change the password (unless you specify /FLAGS=DISFORCE_PWD_CHANGE). Note that the /GENERATE_PASSWORD and /PASSWORD qualifiers are mutually exclusive. /PBYTLMThis flag is reserved for HP./PGFLQUOTA=valueSpecifies the paging file limit. This is the maximum number of pages that the person's process can use in the system paging file. By default, the value is 256,000 pagelets on Alpha and Integrity server systems.If decompressing libraries, make sure to set PGFLQUOTA to twice the size of the library. /PRCLM=valueSpecifies the subprocess creation limit. This is the maximum number of subprocesses that can exist at one time for the specified user's process. By default, the value is 8 on Alpha and Integrity server systems./PRIMEDAYS=([NO]day[,...])Defines the primary and secondary days of the week for logging in. Specify the days as a list separated by commas, and enclose the list in parentheses. To specify a secondary day, prefix the day with NO (for example, NOFRIDAY). To specify a primary day, omit the NO prefix.By default, primary days are Monday through Friday and secondary days are Saturday and Sunday. If you omit a day from the list, AUTHORIZE uses the default value. (For example, if you omit Monday from the list, AUTHORIZE defines Monday as a primary day.) Use the primary and secondary day definitions in conjunction with such qualifiers as /ACCESS, /INTERACTIVE, and /BATCH. /PRIORITY=valueSpecifies the default base priority. The value is an integer in the range of 0 to 63 on Alpha and Integrity server systems. By default, the value is set to 4 for timesharing users./PRIVILEGES=([NO]privname[,...])Specifies which privileges the user is authorized to hold, although these privileges are not necessarily enabled at login. (The /DEFPRIVILEGES qualifier determines which ones are enabled.) A NO prefix removes the privilege from the user. The keyword NOALL disables all user privileges. Many privileges have varying degrees of power and potential system impact (see the HP OpenVMS Guide to System Security for a detailed discussion). By default, a user holds TMPMBX and NETMBX privileges. Privname is the name of the privilege./PWDEXPIRED (default)/NOPWDEXPIREDSpecifies the password is valid for only one login. A user must change a password immediately after login or be locked out of the system. The system warns users of password expiration. A user can either specify a new password, with the DCL command SET PASSWORD, or wait until expiration and be forced to change. By default, a user must change a password when first logging in to an account. The default is applied to the account only when the password is being modified./PWDLIFETIME=time (default)/NOPWDLIFETIMESpecifies the length of time a password is valid. Specify a delta time value in the form [dddd-] [hh:mm:ss.cc]. For example, for a lifetime of 120 days, 0 hours, and 0 seconds, specify /PWDLIFETIME="120-". For a lifetime of 120 days 12 hours, 30 minutes and 30 seconds, specify /PWDLIFETIME="120-12:30:30". If a period longer than the specified time elapses before the user logs in, the system displays a warning message. The password is marked as expired.To prevent a password from expiring, specify the time as NONE. By default, a password expires in 90 days. /PWDMINIMUM=valueSpecifies the minimum password length in characters. Note that this value is enforced only by the DCL command SET PASSWORD. It does not prevent you from entering a password shorter than the minimum length when you use AUTHORIZE to create or modify an account. By default, a password must have at least 6 characters. The value specified by the /PWDMINIMUM qualifier conflicts with the value used by the /GENERATE_PASSWORD qualifier or the DCL command SET PASSWORD/GENERATE, the operating system chooses the lesser value. The maximum value for generated passwords is 10./QUEPRIO=valueReserved for future use./REMOTE[=(range[,...])]Specifies hours during which access is permitted for interactive logins from network remote terminals (with the DCL command SET HOST). For a description of the range specification, see the /ACCESS qualifier. By default, remote logins have no access restrictions./SHRFILLM=valueSpecifies the maximum number of shared files that the user can have open at one time. By default, the system assigns a value of 0, which represents an infinite number./TQELMSpecifies the total number of entries in the timer queue plus the number of temporary common event flag clusters that the user can have at one time. By default, a user can have 100./UIC=valueSpecifies the user identification code (UIC). The UIC value is a group number in the range from 1 to 37776 (octal) and a member number in the range from 0 to 177776 (octal), which are separated by a comma and enclosed in brackets. HP reserves group 1 and groups 300--377 for its own use.Each user must have a unique UIC. By default, the UIC value is [200,200]. /WSDEFAULT=valueSpecifies the default working set limit. This represents the initial limit to the number of physical pages the process can use. (The user can alter the default quantity up to WSQUOTA with the DCL command SET WORKING_SET.) By default, a user has 4096 pagelets on Alpha and Integrity server systems.The value cannot be greater than WSMAX. This quota value replaces smaller values of PQL_MWSDEFAULT. /WSEXTENT=valueSpecifies the working set maximum. This represents the maximum amount of physical memory allowed to the process. The system provides memory to a process beyond its working set quota only when it has excess free pages. The additional memory is recalled by the system if needed.
The value is an integer equal to or greater than WSQUOTA. By default,
the value is 16384 pagelets on Alpha and Integrity server systems. The
value cannot be greater than WSMAX. This quota value replaces smaller
values of
/WSQUOTA=valueSpecifies the working set quota. This is the maximum amount of physical memory a user process can lock into its working set. It also represents the maximum amount of swap space that the system reserves for this process and the maximum amount of physical memory that the system allows the process to consume if the systemwide memory demand is significant.The value cannot be greater than the value of WSMAX and cannot exceed 8,192 pagelets on Alpha and Integrity server systems. This quota value replaces smaller values of PQL_MWSQUOTA. DescriptionThe MODIFY command changes values in a SYSUAF user record. Most values not in the command remain unchanged. If the UIC is changed, the value of the corresponding identifier is also changed.
|
#1 |
---|
UAF> MODIFY ROBIN /PASSWORD=SP0172 %UAF-I-MDFYMSG, user record(s) updated |
The command in this example changes the password for user ROBIN without altering any other values in the record.
#2 |
---|
UAF> MODIFY ROBIN/FLAGS=RESTRICTED %UAF-I-MDFYMSG, user record(s) updated |
The command in this example modifies the UAF record for user ROBIN by adding the login flag RESTRICTED.
Modifies an identifier name, its associated value, or its attributes in the rights database.
MODIFY/IDENTIFIER id-name
id-name
Specifies the name of an identifier to be modified.
/ATTRIBUTES=(keyword[,...])
Specifies attributes to be associated with the modified identifier. The following keywords are valid:
DYNAMIC Allows unprivileged holders of the identifier to remove and to restore the identifier from the process rights list by using the DCL command SET RIGHTS_LIST. HOLDER_HIDDEN Prevents people from getting a list of users who hold an identifier, unless they own the identifier themselves. NAME_HIDDEN Allows holders of an identifier to have it translated, either from binary to ASCII or from ASCII to binary, but prevents unauthorized users from translating the identifier. NOACCESS Makes any access rights of the identifier null and void. If a user is granted an identifier with the No Access attribute, that identifier has no effect on the user's access rights to objects. This attribute is a modifier for an identifier with the Resource or Subsystem attribute. RESOURCE Allows holders of an identifier to charge disk space to the identifier. Used only for file objects. SUBSYSTEM Allows holders of the identifier to create and maintain protected subsystems by assigning the Subsystem ACE to the application images in the subsystem. Used only for file objects. To remove an attribute from the identifier, add a NO prefix to the attribute keyword. For example, to remove the Resource attribute, specify /ATTRIBUTES=NORESOURCE.
Note
If you specify the NORESOURCE keyword without naming any holder with the /HOLDER qualifier, all holders lose the right to charge resources./HOLDER=username
Specifies the holder of an identifier whose attributes are to be modified. The /HOLDER qualifier is used only in conjunction with the /ATTRIBUTES qualifier.If you specify /HOLDER, the /NAME and /VALUE qualifiers are ignored.
/NAME=new-id-name
Specifies a new identifier name to be associated with the identifier./VALUE=value-specifier
Specifies a new identifier value. Note that an identifier value cannot be modified from a UIC to a non-UIC format or vice versa. The following formats are valid for the value-specifier:
IDENTIFIER:n An integer value in the range of 65,536 to 268,435,455. You can also specify the value in hexadecimal (precede the value with %X) or octal (precede the value with %O). To differentiate general identifiers from UIC identifiers, %X80000000 is added to the value you specify.
GID:n GID is the POSIX group identifier. It is an integer value in the range 0 to 16,777,215 (%XFFFFFF). The system will add %XA400.0000 to the value you specify and then enter this new value into the system RIGHTSLIST as an identifier. UIC:uic A UIC value in the standard UIC format.
The MODIFY/IDENTIFIER command changes identifier names, associated values, and attributes in the rights database. Values not specified in the command remain unchanged.
#1 |
---|
UAF> MODIFY/IDENTIFIER OLD_ID /NAME=NEW_ID %UAF-I-RDBMDFYMSG, identifier OLD_ID modified |
The command in this example changes the name of the OLD_ID identifier to NEW_ID.
#2 |
---|
UAF> MODIFY/IDENTIFIER/VALUE=UIC:[300,21] ACCOUNTING %UAF-I-RDBMDFYMSG, identifier ACCOUNTING modified |
The command in this example changes the old UIC value of the identifier ACCOUNTING to a new value.
#3 |
---|
UAF> MODIFY/IDENTIFIER/ATTRIBUTES=NORESOURCE- _UAF> /HOLDER=CRAMER ACCOUNTING %UAF-I-RDBMDFYMSG, identifier ACCOUNTING modified |
The command in this example associates the attribute NORESOURCE with the identifier ACCOUNTING in CRAMER's holder record. The identifier ACCOUNTING is not changed.
Modifies an entry in the network proxy authorization file to specify a different local account as the default proxy account for the remote user or to specify no default proxy account for the remote user.The command modifies an entry in the network proxy authorization file NET$PROXY.DAT and, to maintain compatibility with other systems, modifies an entry in NETPROXY.DAT.
Note
You must modify the proxy database from a system running the current OpenVMS system.
MODIFY/PROXY node::remote-user
node
Specifies a node name. If you specify an asterisk wildcard character (*), the specified remote user on all nodes is served by the local user.remote-user
Specifies the user name of a user at a remote node. If you specify an asterisk wildcard character, all users at the specified node are served by the local user.For systems that are not OpenVMS systems that implement DECnet, specifies the UIC of a user at a remote node. You can specify an asterisk wildcard in the group and member fields of the UIC.
/DEFAULT[=local-user]
Designates the default user name on the local node through which proxy access from the remote user is directed. If /NODEFAULT is specified, removes the default designation.
/NODEFAULT
Use the MODIFY/PROXY command to specify a different local account as the default proxy account for the remote user or to specify that there is no default proxy account for the remote user. Whenever you modify user entries, AUTHORIZE signals DECnet to update its volatile database. Proxy modifications take effect immediately on all nodes in a cluster that share the proxy database.The first command in the following example grants remote user STIR::YETTA proxy access to the PROXY1 and PROXY2 local accounts. The default proxy account is PROXY1. The second command changes the default proxy account to PROXY2.
UAF> ADD/PROXY STIR::YETTA PROXY1/DEFAULT, PROXY2 . . . UAF> MODIFY/PROXY STIR::YETTA /DEFAULT=PROXY2The next example shows the command used to remove the default proxy designation.
UAF> MODIFY/PROXY STIR::YETTA /NODEFAULTIf you remove the default proxy designation as shown in the last command, remote user STIR::YETTA must include the name of the proxy account (PROXY1 or PROXY2) in the access control string of each network operation to gain proxy access to the local system.
If no default proxy account is specified either in the network proxy database or in the access control string of the DCL command, the system attempts to perform the network operation using the default DECnet account.
UAF> MODIFY/PROXY MISHA::MARCO /DEFAULT=JOHNSON %UAF-I-NAFADDMSG, record successfully modified in NETPROXY.DAT |
The command in this example changes the default proxy account for user MARCO on the remote node MISHA to the JOHNSON account.
Changes the systemwide password.
Note
The systemwide password is different from the password for the SYSTEM user name. See the note in the Description.This command operates similarly to the DCL command SET PASSWORD/SYSTEM.
MODIFY/SYSTEM_PASSWORD= system-password
system-password
Specifies the new systemwide password.
None.
For a detailed description of the effects of this command, see the discussion of the SET PASSWORD/SYSTEM command in the HP OpenVMS Guide to System Security.
UAF> MODIFY/SYSTEM_PASSWORD=ABRACADABRA UAF> |
This command changes the systemwide password to ABRACADABRA.
Deletes a SYSUAF user record and corresponding identifiers in the rights database. The DEFAULT and SYSTEM records cannot be deleted.
Note
REMOVE/IDENTIFIER and REMOVE/PROXY are documented as separate commands.
REMOVE username
username
Specifies the name of a user in the SYSUAF.
/REMOVE_IDENTIFIER (default)
/NOREMOVE_IDENTIFIER
Specifies whether the user name and account name identifiers should be removed from the rights database when a record is removed from the UAF. If two UAF records have the same UIC, the user name identifier is removed only when the second record is deleted. Similarly, the account name identifier is removed only if there are no remaining UAF records with the same group as the deleted record.
If you remove a SYSUAF record for a user who also appears as a local user in the network user authorization file, every network authorization record for that user is also removed.
UAF> REMOVE ROBIN %UAF-I-REMMSG, record removed from SYSUAF.DAT %UAF-I-RDBREMMSGU, identifier ROBIN value: [000014,000006] removed from RIGHTSLIST.DAT |
The command in this example deletes the record for user ROBIN from the SYSUAF and ROBIN's UIC identifier from RIGHTSLIST.DAT.
Removes an identifier from the rights database.
REMOVE/IDENTIFIER id-name
id-name
Specifies the name of an identifier in the rights database.
None.
UAF> REMOVE/IDENTIFIER Q1SALES %UAF-I-RDBREMMSGU, identifier Q1SALES value %X80010024 removed from RIGHTSLIST.DAT |
The command in this example removes the identifier Q1SALES from the rights database. All of its holder records are removed with it.
Deletes network proxy access for the specified remote user.
REMOVE/PROXY node::remote-user [local-user,...]
node
Specifies the name of a network node in the network proxy authorization file.remote-user
Specifies the user name or UIC of a user on a remote node. The asterisk wildcard character (*) is permitted in the remote-user specification.local-user
Specifies the user name of from 1 to 16 users on the local node. If no local user is specified, proxy access to all local accounts is removed.
None.
UAF> REMOVE/PROXY MISHA::MARCO %UAF-I-NAFREMMSG, proxy from MISHA::MARCO to * removed |
The command in this example deletes the record for MISHA::MARCO from the network proxy authorization file, removing all proxy access to the local node for user MARCO on node MISHA.
Changes the user name of the SYSUAF record (and, if specified, the corresponding identifier) while retaining the characteristics of the old record.
Note
RENAME/IDENTIFIER is documented as a separate command.
RENAME oldusername newusername
oldusername
Specifies the current user name in the SYSUAF.newusername
Specifies the new name for the user. It can contain 1 to 12 alphanumeric characters and underscores. Although dollar signs are permitted, they are usually reserved for system names.
/GENERATE_PASSWORD[=keyword]
/NOGENERATE_PASSWORD (default)
Invokes the password generator to create user passwords. Generated passwords can consist of 1 to 10 characters. Specify one of the following keywords:
BOTH Generate primary and secondary passwords. CURRENT Do whatever the DEFAULT account does (for example, generate primary, secondary, both, or no passwords). This is the default keyword. PRIMARY Generate primary password only. SECONDARY Generate secondary password only. When you modify a password, the new password expires automatically; it is valid only once (unless you specify /NOPWDEXPIRED). On login, users are forced to change their passwords (unless you specify /FLAGS=DISFORCE_PWD_CHANGE).
Note that the /GENERATE_PASSWORD and /PASSWORD qualifiers are mutually exclusive.
/MODIFY_IDENTIFIER (default)
/NOMODIFY_IDENTIFIER
Specifies whether the identifier associated with the user is to be modified in the rights database. This qualifier applies only when you modify the UIC or user name in the UAF record. By default, the associated identifiers are modified./PASSWORD=(password1[,password2])
/NOPASSWORD
Specifies up to two passwords for login. Passwords can be from 0 to 32 alphanumeric characters in length. The dollar sign ($) and underscore (_) are also permitted.Uppercase and lowercase characters are equivalent. All lowercase characters are converted to uppercase before the password is encrypted. Avoid using the word password as the actual password.
Use the /PASSWORD qualifier as follows:
- To set only the first password and clear the second, specify /PASSWORD=password.
- To set both the first and second password, specify /PASSWORD=(password1, password2).
- To change the first password without affecting the second, specify /PASSWORD=(password, "").
- To change the second password without affecting the first, specify /PASSWORD=("", password).
- To set both passwords to null, specify /NOPASSWORD.
When you modify a password, the new password expires automatically; it is valid only once (unless you specify /NOPWDEXPIRED). On login, the user is forced to change the password (unless you specify /FLAGS=DISFORCE_PWD_CHANGE).
Note that the /GENERATE_PASSWORD and /PASSWORD qualifiers are mutually exclusive.
When you create a new UAF record with the RENAME command, you must specify a password.
The RENAME command renames a SYSUAF record. It changes the user name of the SYSUAF record (and, if specified, the corresponding identifier) while retaining the characteristics of the old record. Retention of these characteristics can be particularly helpful when a user's name changes.Note that because password verification includes the user name as well as the password, an attempted login will fail when the user whose name has been changed attempts to log in with an old password. (Only null passwords can be effectively transferred from one user record to another by the RENAME command.) Make it a practice to include a new password when you use the RENAME command, and notify the user of the change. If you omit the /PASSWORD qualifier, you receive a warning message reminding you that the old password must be changed.
The user's network authorization records are automatically changed to the new name.
#1 |
---|
UAF> RENAME HAWKES KRAMERDOVE/PASSWORD=MARANNKRA %UAF-I-PRACREN, proxies to HAWKES renamed %UAF-I-RENMSG, user record renamed %UAF-I-RDBMDFYMSG, identifier HAWKES modified |
Previous Next Contents Index