![]() |
![]() HP OpenVMS Systemsask the wizard |
![]() |
The Question is: Good Morning, I have a Vax Station 4000-60 with Motif. I am having trouble trying to access the DecTerm. I click the option but nothing happens. Work in progress starts with Status - Active then changes to Done. Showing the output, displays the error mess age 'Timeout waiting for DECterm controller to start'. I'd appreciate any help to get me going. Cheers. The Answer is : First, ensure that you have any appropriate available ECO kit applied. There are ECO kits available for DECwindows Motif V1.2-3 and V1.2-4. Then temporarily RENAME your LOGIN.COM and SYLOGIN.COM procedures. Since the DECterm controller process executes both of these procedures, anything which expects user input or expects a specific interactive environment can cause the DECterm controller to hang, and thus timeout your DECterm request. Whether or not the RENAME solves the problem, you should ensure that any LOGIN procedures have appropriate alternate paths for different process types. If the DECterm still refuses to start, please log a call with your local Compaq Customer Support Center for assistance. A slightly-edited OpenVMS V7.2 SYLOGIN.TEMPLATE example follows: $ Set NoOn $ VERIFY = F$VERIFY(F$TRNLNM("SYLOGIN_VERIFY")) $ Goto MODE_'F$MODE()' $!++ $! SYLOGIN, the site-specific system-wide login command procedure $! $! This command procedure is invoked when a DCL process logs into the $! OpenVMS system. This procedure is a system-wide equivalent to the $! user's LOGIN.COM procedure; these commands are executed everytime $! anyone on the OpenVMS system logs in to their account, or any time $! a (DCL-based) network task process logs in, or any time a detached $! process (running DCL) starts, or any time a batch job starts up. $! $! SYLOGIN Structure: $! $! This SYLOGIN procedure is divided into four sections, sections that $! are invoked for "Interactive", "Batch", "Network", and "Other" "mode" $! process logins. Each section falls through into the next section, $! and thus commands are cumulative. $! $! For details on how these sections are established and on the meanings $! of these modes, see the f$mode() lexical function documentation. $! $! How to Customize SYLOGIN: $! $! Most user modifications will involve the definitions of symbols $! or logical names, or the invocation of various command procedures $! or DCL verbs, in the "Interactive" section, or -- most likely -- in $! the "Batch" section. (Note that all "Interactive" users will "fall $! through" and invoke the commands in the "Batch" section, and will $! then fall through again into the other sections.) $! $! Relatively few changes should be made to the "Network" and "Other" $! sections, as these processes usually do not rely on symbols, logical $! names, or other context established in this procedure, as most sites $! prefer these processes to have fast logins, and minimal overhead. $! (User sessions established via SET HOST or telnet are considered $! "Interactive" sessions, and not "Network" sessions.) $! $! To display the contents of the SYLOGIN procedure as it executes, $! define the logical name SYLOGIN_VERIFY in the group or system $! logical name table -- this enables verification for all logins $! in the UIC group or on the system. (As the process running the $! SYLOGIN is just logging in, the process and job logical name tables $! are not nearly as accessable nor as useful.) $! $! How to Set Up SYLOGIN: $! $! Rename SYS$STARTUP:SYLOGIN.TEMPLATE to SYS$COMMON:[SYS$STARTUP] $! SYLOGIN.COM, with a file protection setting that allows at least $! world:execute access to the SYLOGIN.COM file and to all parent $! directories of the file. Make any DCL changes necessary or $! appropriate to your local site. $! $! In SYSTARTUP_VMS.COM, add the following line: $! $! $ DEFINE/EXECUTIVE/SYSTEM SYS$SYLOGIN SYS$STARTUP:SYLOGIN $! $! This will cause SYLOGIN.COM to be executed for all DCL logins $! on the system. Use the following SYSMAN commands to set up $! the SYS$SYLOGIN logical name "live" on all VMScluster nodes: $! $! $ RUN SYS$SYSTEM:SYSMAN $! SYSMAN> SET ENVIROMENT/CLUSTER $! SYSMAN> SET PROFILE/PRIVILEGE=(SYSNAM,CMEXEC) $! SYSMAN> DO DEFINE/EXECUTIVE/SYSTEM SYS$SYLOGIN SYS$STARTUP:SYLOGIN $! $! If the local node is operating standalone, the commands: $! $! $ SET PROCESS/PRIVILEGE=(SYSNAM,CMEXEC) $! $ DEFINE/EXECUTIVE/SYSTEM SYS$SYLOGIN SYS$STARTUP:SYLOGIN $! $! can be directly executed. $! $-- $MODE_INTERACTIVE: $! Turn on the processing of [Control/T]. $! $ SET CONTROL=T $! Set the terminal type, unless this is a detached DECwindows application, $! or a remote login, or specific other terminal types. (Note that remote $! user logins, via such protocols as DECnet CTERM (SET HOST, device driver $! prefix "RT") and IP (telnet, device driver prefix "TN"), are considered $! "Interactive" processes, and not "Network" processes.) $ TT_NOINQUIR = "|TW|RT|WT|TK|WS|PY|FT|TN|" $ TT_DEVNAME = F$GETDVI("TT","TT_PHYDEVNAM") $ TT_DEVPREFIX = F$EXTRACT(1,2,TT_DEVNAME) $ IF F$LOCATE("|''TT_DEVPREFIX'|",TT_NOINQUIR) .eq. F$Length(TT_NOINQUIR) $ THEN $ ! Determine what sort of terminal this is, and avoid resetting $ ! the user's default display size settings in the process... $ tt_page = f$getdvi("TT","TT_PAGE") $ devbufsiz = f$getdvi("TT","DEVBUFSIZ") $ SET TERMINAL/INQUIRE/PAGE='tt_page'/WIDTH='devbufsiz' $ EndIf $! Remove the comments from the following command to support the Wollongong $! PathWay specific login procedure. $! @TWG$TCP:[NETDIST.MISC]SYSLOGIN.COM $! Remove the comment from the following command to execute Process Software's $! TCPware command definition procedure. $! @TCPWARE:TCPWARE_COMMANDS.COM $! Fall through... $MODE_BATCH: $! Place commands that should be available to interactive users, and to $! batch jobs, below. This is the most common place for user-defined $! logical names and DCL symbols. $ IF (F$TRNLNM("SYS$MICROVAX")) $ THEN $ ! For MicroVAX systems only, use the command MOUNT/NOASSIST. $ MOU*NT :== MOUNT/NOASSIST $ EndIf $! ======= ================= =========== $! A D D C O M M A N D S B E L O W $! ======= ================= =========== $! ======= ================= =========== $! A D D C O M M A N D S A B O V E $! ======= ================= =========== $! Fall through... $MODE_NETWORK: $! Place those commands that should be available to interactive users, $! to batch jobs, and to network jobs, below. (Few commands should be $! placed here, as network tasks do not normally need symbols nor $! logical names defined in SYLOGIN.) $! Fall through... $MODE_OTHER: $! Place those commands that should be available to interactive users, $! to batch jobs, and to network jobs, below. (Very few commands should $! be placed here, as detached processes do not normally need symbols nor $! logical names defined in SYLOGIN.) $ Exit 1
|