|
HP OpenVMS Systemsask the wizard |
|
The Question is: I have a problem with incomming FTP on a 2 node cluster DIGITAL TCP/IP Services for OpenVMS Alpha Version V5.0A - ECO 2 on a AlphaServer 2100 4/275 running OpenVMS V7.1-1H2 1 node can proces outgoing en incomming ftp connections and the other only outgoing. the message is: %TCPIP-E-FTP_NETERR, I/O error on network device -SYSTEM-F-REJECT, connect to network object rejected i can not find any difference in the configuration of the nodes ftp client and server is enabled on both nodes all services on de good node Service Port Proto Process Address State BIND 53 TCP,UDP TCPIP$BIND 0.0.0.0 Disabled BPS_GET_GMS 5104 TCP BPS_GET_GMS 0.0.0.0 Enabled BPS_GET_GMS_DMO 5304 TCP BPS_GET_GMS_DMO 0.0.0.0 Enabled BPS_GET_LAF 5107 TCP BPS_GET_LAF 0.0.0.0 Enabled BPS_GET_LAF_DMO 5307 TCP BPS_GET_LAF_DMO 0.0.0.0 Enabled FINGER 79 TCP TCPIP$FINGER 0.0.0.0 Enabled FTP 21 TCP TCPIP$FTP 0.0.0.0 Enabled LBROKER 6570 UDP TCPIP$LBROKER 0.0.0.0 Disabled LPD 515 TCP TCPIP$LPD 0.0.0.0 Enabled NTP 123 UDP TCPIP$NTP 0.0.0.0 Enabled PPS_LES_SRVR 5202 TCP PPS_LES_SRVR 0.0.0.0 Disabled PPS_SRVR 5201 TCP PPS_SRVR 0.0.0.0 Disabled RDBSERVER 1 TCP RDB 0.0.0.0 Enabled RLOGIN 513 TCP not defined 0.0.0.0 Enabled RSH 514 TCP TCPIP$RSH 0.0.0.0 Enabled SMTP 25 TCP TCPIP$SMTP 0.0.0.0 Enabled SNMP 161 UDP UCX$SNMP 0.0.0.0 Disabled SPAGENT 4999 TCP SWCC_AGENT 0.0.0.0 Enabled SPGUI 4998 TCP SWCC_GUI 0.0.0.0 Enabled SPILCOM 6202 TCP UCX_SPILCOM 0.0.0.0 Enabled TELNET 23 TCP not defined 0.0.0.0 Enabled TFTP 69 UDP TCPIP$TFTP 0.0.0.0 Disabled all services on the node with problems BIND 53 TCP,UDP TCPIP$BIND 0.0.0.0 Disabled BPS_GET_GMS 5104 TCP BPS_GET_GMS 0.0.0.0 Enabled BPS_GET_GMS_DMO 5304 TCP BPS_GET_GMS_DMO 0.0.0.0 Enabled BPS_GET_LAF 5107 TCP BPS_GET_LAF 0.0.0.0 Enabled BPS_GET_LAF_DMO 5307 TCP BPS_GET_LAF_DMO 0.0.0.0 Enabled FINGER 79 TCP TCPIP$FINGER 0.0.0.0 Enabled FTP 21 TCP TCPIP$FTP 0.0.0.0 Enabled LBROKER 6570 UDP TCPIP$LBROKER 0.0.0.0 Disabled LPD 515 TCP TCPIP$LPD 0.0.0.0 Disabled NTP 123 UDP TCPIP$NTP 0.0.0.0 Enabled PPS_LES_SRVR 5202 TCP PPS_LES_SRVR 0.0.0.0 Disabled PPS_SRVR 5201 TCP PPS_SRVR 0.0.0.0 Disabled RDBSERVER 1 TCP RDB 0.0.0.0 Enabled RLOGIN 513 TCP not defined 0.0.0.0 Enabled RSH 514 TCP TCPIP$RSH 0.0.0.0 Enabled SMTP 25 TCP The Answer is : The OpenVMS Wizard will assume that you have verified that both FTP client and FTP server have been configured and started on both hosts, and that consistent security settings are in use. If not, please start there. You will also want to verify the contents of the FTP logs, enabling these as required -- see the TCP/IP Services manuals for details on FTP logging. You will also want to verify the system-wide login and any local login that the server(s) might encounter. Please move to a supported configuration -- your OpenVMS Alpha release is a hardware release, and your TCP/IP Services version is equivalently old. As of this writing, V7.3-1 and V5.3 (each eith the appropriate ECO kits) are current.
|