Compaq DLT Tape Library
Updated August 20, 2004
Created July 10, 2001

Autogenerated Site Map
Search this Site!:
Search this site powered by FreeFind

Using MTX and TAR

From Antony Platt (some text has been modified):

I have an older Model 20/40 DLT Library hooked to a ProLiant 2500 doing my backup duties here.

15 Tapes 2 Drives (only has one installed)

The Library is detected as "HP"
It shows 2 separate SCSI ID's (one for the drive, one for the robot arm)
Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: Quantum  Model: DLT4000 CPQ LDRV Rev: D67F
  Type:   Sequential-Access                ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: HP       Model: C5173-4000       Rev: 4.05
  Type:   Medium Changer                   ANSI SCSI revision: 02
I use a small program called MTX to control the robotics. Then stir in a spoonful of shell scripting and TAR. This is a workable solution for me.

MTX is very easy to use and understand.

Standard Disclaimer: Please note that these scripts come with no warranty. If anything breaks when using these scripts, you get to keep both pieces.

backup-scripts.tar.gz - Collection of Tape Library Scripts as provided by Antony Platt
Other possible choices:

Search this Site!:
Search this site powered by FreeFind
Homepage: http://www.cpqlinux.com
Site Map: http://www.cpqlinux.com/sitemap.html