Linux version 2.4.18-acpi-dsdt-20020816-1 (root@p2701.cpqlinux.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-112)) #1 Fri Aug 16 11:02:38 CDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff73c00 (ACPI data) BIOS-e820: 000000001ff73c00 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130912 zone(0): 4096 pages. zone(1): 126816 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f6180 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1ff6d24c ACPI: FADT (v001 INTEL Almador 01540.00000) @ 0x1ff73b64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1ff73bd8 Kernel command line: ro root=/dev/hda2 hdb=ide-scsi hdc=ide-scsi ide_setup: hdb=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 996.705 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1985.74 BogoMIPS Memory: 512676k/523648k available (1284k kernel code, 10584k reserved, 397k data, 236k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20020725 PCI: PCI BIOS revision 2.10 entry at 0xfd99b, last bus=2 PCI: Using configuration type 1 tbget-0271: *** Info: Table [DSDT] replaced by host OS tbxface-0099 [03] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:.......................................................................................................................................................................................................................... Table [DSDT] - 672 Objects with 58 Devices 218 Methods 23 Regions ACPI Namespace successfully loaded at root c02f3dfc evxfevnt-0076 [04] Acpi_enable : Transition to ACPI mode successful Executing all Device _STA and_INI methods:.......................................................... 58 Devices found containing: 58 _STA, 5 _INI methods Completing Region/Field/Buffer/Package initialization:....................................................................... Initialized 15/23 Regions 0/0 Fields 28/28 Buffers 28/28 Packages (672 nodes) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Unknown bridge resource 2: assuming transparent ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 15, disabled) ACPI: Embedded Controller [EC0] (gpe 29) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] pci_bind-0191 [12] acpi_pci_bind : Device 00:00:1d.07 not present in PCI namespace ACPI: Power Resource [PLPC] (on) pci_bind-0191 [14] acpi_pci_bind : Device 00:00:1f.06 not present in PCI namespace ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized [ACPI Debug] String: INIT BATO in acad.psr [ACPI Debug] String: INIT BATO in acad.psr ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2, 2 performance states) [ACPI Debug] String: ========= BAT1 UPBI ========= dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Local[3] at node dfe72d4c dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Local[3] at node dfe72d4c dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Local[3] at node dff2954c [ACPI Debug] String: Current Temperature C is ----------- [ACPI Debug] Integer: 000000000000003A [ACPI Debug] String: Current Temperature K is ----------- [ACPI Debug] Integer: 0000000000000CF0 [ACPI Debug] String: Current Temperature C is ----------- [ACPI Debug] Integer: 000000000000003A [ACPI Debug] String: Current Temperature K is ----------- [ACPI Debug] Integer: 0000000000000CF0 ACPI: Thermal Zone [THRM] (58 C) pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N030ATDA04-0, ATA DISK drive hdb: LG DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive hdc: UJDA330, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 58605120 sectors (30006 MB) w/1806KiB Cache, CHS=3648/255/63, UDMA(100) ide-floppy driver 0.97.sv Partition check: hda:[ACPI Debug] Integer: 0000000000000014 [ACPI Debug] String: BATD= [ACPI Debug] Integer: 00000000000010F1 [ACPI Debug] String: BATO= [ACPI Debug] Integer: 00000000000000C0 [ACPI Debug] String: Notify Bat1 00 [ACPI Debug] String: Skip init BATO [ACPI Debug] String: Skip init BATO [ACPI Debug] String: ========= BAT1 UPBI ========= dsmthdat-0432 [85] Ds_method_data_get_val: Uninitialized Local[3] at node dfe5094c dsmthdat-0432 [85] Ds_method_data_get_val: Uninitialized Local[3] at node dfe5094c hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ide-floppy driver 0.97.sv md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 119k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 236k freed Adding Swap: 1044216k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 11:23:03 Aug 16 2002 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LG Model: DVD-ROM DRN8080B Rev: 4.00 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MATSHITA Model: UJDA330 Rev: 1.51 Type: CD-ROM ANSI SCSI revision: 02 hdb: DMA disabled hdc: DMA disabled parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:6C:D5:D4, IRQ 10. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta IRQ list 0098, PCI irq11 Socket status: 30000006 cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x107f 0x1180-0x11bf cs: IO port probe 0x0a00-0x0aff: clean. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i830M chipset agpgart: AGP aperture is 256M @ 0xe0000000 [drm] AGP 0.99 on Unknown @ 0xe0000000 256MB [drm] Initialized radeon 1.1.1 20010405 on minor 0