Linux version 2.4.18-acpi-dsdt-20020816-1 (root@p2701.cpqlinu | Linux version 2.4.18-acpi-dsdt-20020816-2 (root@p2701.cpqlinu BIOS-provided physical RAM map: BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff73c00 (ACPI data) BIOS-e820: 000000001ff60000 - 000000001ff73c00 (ACPI data) BIOS-e820: 000000001ff73c00 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff73c00 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) ACPI: have wakeup address 0xc0001000 ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 130912 On node 0 totalpages: 130912 zone(0): 4096 pages. zone(0): 4096 pages. zone(1): 126816 pages. zone(1): 126816 pages. zone(2): 0 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f6180 ACPI: RSDP (v000 PTLTD ) @ 0x000f6180 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1ff6 ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x1ff6 ACPI: FADT (v001 INTEL Almador 01540.00000) @ 0x1ff73b64 ACPI: FADT (v001 INTEL Almador 01540.00000) @ 0x1ff73b64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1ff73bd8 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x1ff73bd8 Kernel command line: ro root=/dev/hda2 hdb=ide-scsi hdc=ide-s Kernel command line: ro root=/dev/hda2 hdb=ide-scsi hdc=ide-s ide_setup: hdb=ide-scsi ide_setup: hdb=ide-scsi ide_setup: hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Initializing CPU#0 Detected 996.705 MHz processor. | Detected 996.698 MHz processor. Console: colour VGA+ 80x25 Console: colour VGA+ 80x25 Calibrating delay loop... 1985.74 BogoMIPS Calibrating delay loop... 1985.74 BogoMIPS Memory: 512676k/523648k available (1284k kernel code, 10584k Memory: 512676k/523648k available (1284k kernel code, 10584k Dentry-cache hash table entries: 65536 (order: 7, 524288 byte Dentry-cache hash table entries: 65536 (order: 7, 524288 byte Inode-cache hash table entries: 32768 (order: 6, 262144 bytes Inode-cache hash table entries: 32768 (order: 6, 262144 bytes Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 byte Buffer-cache hash table entries: 32768 (order: 5, 131072 byte Page-cache hash table entries: 131072 (order: 7, 524288 bytes Page-cache hash table entries: 131072 (order: 7, 524288 bytes CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, ve CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, ve CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: L2 cache: 512K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 0000 CPU: After vendor init, caps: 0383f9ff 00000000 00000000 0000 Intel machine check architecture supported. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 0000 CPU: After generic, caps: 0383f9ff 00000000 00000000 0000 CPU: Common caps: 0383f9ff 00000000 00000000 0000 CPU: Common caps: 0383f9ff 00000000 00000000 0000 CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping Enabling fast FPU save and restore... done. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20020725 ACPI: Subsystem revision 20020725 PCI: PCI BIOS revision 2.10 entry at 0xfd99b, last bus=2 PCI: PCI BIOS revision 2.10 entry at 0xfd99b, last bus=2 PCI: Using configuration type 1 PCI: Using configuration type 1 tbget-0271: *** Info: Table [DSDT] replaced by host OS tbget-0271: *** Info: Table [DSDT] replaced by host OS tbxface-0099 [03] Acpi_load_tables : ACPI Tables succes tbxface-0099 [03] Acpi_load_tables : ACPI Tables succes Parsing Methods:............................................. Parsing Methods:............................................. Table [DSDT] - 672 Objects with 58 Devices 218 Methods 23 Reg Table [DSDT] - 672 Objects with 58 Devices 218 Methods 23 Reg ACPI Namespace successfully loaded at root c02f3dfc ACPI Namespace successfully loaded at root c02f3dfc evxfevnt-0076 [04] Acpi_enable : Transition to ACPI evxfevnt-0076 [04] Acpi_enable : Transition to ACPI Executing all Device _STA and_INI methods:................... Executing all Device _STA and_INI methods:................... 58 Devices found containing: 58 _STA, 5 _INI methods 58 Devices found containing: 58 _STA, 5 _INI methods Completing Region/Field/Buffer/Package initialization:....... Completing Region/Field/Buffer/Package initialization:....... Initialized 15/23 Regions 0/0 Fields 28/28 Buffers 28/28 Pack Initialized 15/23 Regions 0/0 Fields 28/28 Buffers 28/28 Pack ACPI: Interpreter enabled ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Probing PCI hardware (bus 00) Unknown bridge resource 2: assuming transparent Unknown bridge resource 2: assuming transparent ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ACPI Debug] Buffer: Length 06 [ACPI Debug] Buffer: Length 06 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 1 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 1 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 1 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 1 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 1 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12 14 1 ACPI: Embedded Controller [EC0] (gpe 29) ACPI: Embedded Controller [EC0] (gpe 29) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] pci_bind-0191 [12] acpi_pci_bind : Device 00:00:1d.07 pci_bind-0191 [12] acpi_pci_bind : Device 00:00:1d.07 ACPI: Power Resource [PLPC] (on) ACPI: Power Resource [PLPC] (on) pci_bind-0191 [14] acpi_pci_bind : Device 00:00:1f.06 pci_bind-0191 [14] acpi_pci_bind : Device 00:00:1f.06 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 isapnp: Scanning for PnP cards... isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Initializing RT netlink socket Starting kswapd Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized VFS: Diskquotas version dquot_6.4.0 initialized [ACPI Debug] String: INIT BATO in acad.psr [ACPI Debug] String: INIT BATO in acad.psr [ACPI Debug] String: INIT BATO in acad.psr [ACPI Debug] String: INIT BATO in acad.psr ACPI: AC Adapter [ACAD] (on-line) ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Battery Slot [BAT2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2, 2 performance states) ACPI: Processor [CPU0] (supports C1 C2, 2 performance states) [ACPI Debug] String: ========= BAT1 UPBI ========= [ACPI Debug] String: ========= BAT1 UPBI ========= dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Loca dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Loca dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Loca dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Loca dsmthdat-0432 [30] Ds_method_data_get_val: Uninitialized Loca < [ACPI Debug] String: Current Temperature C is ----------- [ACPI Debug] String: Current Temperature C is ----------- [ACPI Debug] Integer: 000000000000003A [ACPI Debug] Integer: 000000000000003A [ACPI Debug] String: Current Temperature K is ----------- [ACPI Debug] String: Current Temperature K is ----------- [ACPI Debug] Integer: 0000000000000CF0 [ACPI Debug] Integer: 0000000000000CF0 [ACPI Debug] String: Current Temperature C is ----------- [ACPI Debug] String: Current Temperature C is ----------- [ACPI Debug] Integer: 000000000000003A [ACPI Debug] Integer: 000000000000003A [ACPI Debug] String: Current Temperature K is ----------- [ACPI Debug] String: Current Temperature K is ----------- [ACPI Debug] Integer: 0000000000000CF0 [ACPI Debug] Integer: 0000000000000CF0 ACPI: Thermal Zone [THRM] (58 C) ACPI: Thermal Zone [THRM] (58 C) pty: 2048 Unix98 ptys configured pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULT Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULT ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 b RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 b Uniform Multi-Platform E-IDE driver Revision: 6.31 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override ide: Assuming 33MHz system bus speed for PIO modes; override PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: Enabling device 00:1f.1 (0005 -> 0007) PIIX4: chipset revision 1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hd ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hd ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hd ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:DMA, hd hda: IC25N030ATDA04-0, ATA DISK drive hda: IC25N030ATDA04-0, ATA DISK drive hdb: LG DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive hdb: LG DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive hdc: UJDA330, ATAPI CD/DVD-ROM drive hdc: UJDA330, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide1 at 0x170-0x177,0x376 on irq 15 hda: 58605120 sectors (30006 MB) w/1806KiB Cache, CHS=3648/25 hda: 58605120 sectors (30006 MB) w/1806KiB Cache, CHS=3648/25 ide-floppy driver 0.97.sv ide-floppy driver 0.97.sv Partition check: Partition check: hda:[ACPI Debug] Integer: 0000000000000014 | hda:[ACPI Debug] String: INIT BATO at BAT1._STA [ACPI Debug] String: BATD= < [ACPI Debug] Integer: 00000000000010F1 < [ACPI Debug] String: BATO= < [ACPI Debug] Integer: 00000000000000C0 < [ACPI Debug] String: Notify Bat1 00 < [ACPI Debug] String: Skip init BATO < [ACPI Debug] String: Skip init BATO < [ACPI Debug] String: ========= BAT1 UPBI ========= < dsmthdat-0432 [85] Ds_method_data_get_val: Uninitialized Loca < dsmthdat-0432 [85] Ds_method_data_get_val: Uninitialized Loca < hda1 hda2 hda3 hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 FDC 0 is a National Semiconductor PC87306 ide-floppy driver 0.97.sv ide-floppy driver 0.97.sv md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: Autodetecting RAID arrays. md: autorun ... md: autorun ... md: ... autorun DONE. md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 RAMDISK: Compressed image found at block 0 Freeing initrd memory: 119k freed Freeing initrd memory: 119k freed VFS: Mounted root (ext2 filesystem). VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 236k freed Freeing unused kernel memory: 236k freed Adding Swap: 1044216k swap-space (priority -1) Adding Swap: 1044216k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 11:23:03 Aug 16 2002 | usb-uhci.c: $Revision: 1.275 $ time 14:19:11 Aug 16 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 9 usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 9 usb-uhci.c: Detected 2 ports usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: USB hub found hub.c: 2 ports detected hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 11 usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 11 usb-uhci.c: Detected 2 ports usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: USB hub found hub.c: 2 ports detected hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9 usb-uhci.c: Detected 2 ports usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: USB hub found hub.c: 2 ports detected hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface dr usb-uhci.c: v1.275:USB Universal Host Controller Interface dr EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journa EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journa kjournald starting. Commit interval 5 seconds kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journa EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journa EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem driver Revision: 1.00 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LG Model: DVD-ROM DRN8080B Rev: 4.00 Vendor: LG Model: DVD-ROM DRN8080B Rev: 4.00 Type: CD-ROM ANSI SCSI revisi Type: CD-ROM ANSI SCSI revisi Vendor: MATSHITA Model: UJDA330 Rev: 1.51 Vendor: MATSHITA Model: UJDA330 Rev: 1.51 Type: CD-ROM ANSI SCSI revisi Type: CD-ROM ANSI SCSI revisi hdb: DMA disabled hdb: DMA disabled hdc: DMA disabled hdc: DMA disabled parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: irq 7 detected eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.co eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.co eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:6C:D5:D4, I eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:A5:6C:D5:D4, I Board assembly 000000-000, Physical connectors present: RJ4 Board assembly 000000-000, Physical connectors present: RJ4 Primary interface chip i82555 PHY #1. Primary interface chip i82555 PHY #1. General self-test: passed. General self-test: passed. Serial sub-system self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ROM checksum self-test: passed (0x04f4518b). Linux Kernel Card Services 3.1.22 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] options: [pci] [cardbus] [pm] Yenta IRQ list 0098, PCI irq11 Yenta IRQ list 0098, PCI irq11 Socket status: 30000006 Socket status: 30000006 cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x107f 0x11 cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x107f 0x11 cs: IO port probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0a00-0x0aff: clean. Linux agpgart interface v0.99 (c) Jeff Hartmann Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i830M chipset agpgart: Detected Intel i830M chipset agpgart: AGP aperture is 256M @ 0xe0000000 agpgart: AGP aperture is 256M @ 0xe0000000 [drm] AGP 0.99 on Unknown @ 0xe0000000 256MB [drm] AGP 0.99 on Unknown @ 0xe0000000 256MB [drm] Initialized radeon 1.1.1 20010405 on minor 0 [drm] Initialized radeon 1.1.1 20010405 on minor 0