;ษอออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออป
;บ                                                                 บ
;บ             Olicom PC/MC Token-Ring Network Adapter             บ
;บ             Adapter Description File   Version 1.10             บ
;บ                    Copyright 1989 by Olicom                     บ
;บ                                                                 บ
;ศอออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออผ

AdapterID 00C83h

AdapterName "Olicom PC/MC Token-Ring Network Adapter"

NumBytes 3

FixedResources
     POS[3]=XX00XXXXb

NamedItem Prompt "Primary or Alternate adapter"

  Choice "Primary    I/O 0A20h - 0A2Fh"
     POS[1]=00XXXXXXb
     IO  0A20h - 0A2Fh

  Choice "Alternate  I/O 1A20h - 1A2Fh"
     POS[1]=10XXXXXXb
     IO  1A20h - 1A2Fh

  Choice "Primary    I/O 0A60h - 0A6Fh"
     POS[1]=01XXXXXXb
     IO  0A60h - 0A6Fh

  Choice "Alternate  I/O 1A60h - 1A6Fh"
     POS[1]=11XXXXXXb
     IO  1A60h - 1A6Fh

  Help "PRIMARY OR ALTERNATE ADAPTER:  Up to two Token-Ring Network
        adapters may be installed in this computer.  An adapter may be
        either Primary, which is accessed at port addresses 0A20 through
        0A2F, or Alternate, which is accessed at port addresses 1A20
        through 1A2F.  If one Token-Ring Network adapter is installed, it
        may be either Primary or Alternate.  If two are installed,
        one must be defined as Primary and the other Alternate.
        The assignment for the Token-Ring Network adapter can be changed
        by selecting 'Change Configuration' and then using the
        F5=Previous and the F6=Next keys.  If an assignment has an
        asterisk (*) by it, it is in conflict with another
        assignment and the port address must be changed.  If a
        conflict continues to exist, you may have to change the
        assignments for other adapters or options that are in your
        computer to resolve the conflict."

NamedItem Prompt "RPL EPROM Address location"

  Choice "EPROM Disabled"
     POS[1]=XX100XXXb

  Choice "D0000h - D7FFFh"
     POS[1]=XX010XXXb
     MEM 0D0000h - 0D7FFFh

  Choice "D8000h - DFFFFh"
     POS[1]=XX011XXXb
     MEM 0D8000h - 0DFFFFh

  Choice "C0000h - C7FFFh"
     POS[1]=XX000XXXb
     MEM 0C0000h - 0C7FFFh

  Choice "C8000h - CFFFFh"
     POS[1]=XX001XXXb
     MEM 0C8000h - 0CFFFFh

  Help "EPROM ADDRESS LOCATION: There are 4 possible 32K blocks of memory
        that can be assigned for accessing the EPROM area of the
        Token-Ring Network adapter.  The preferred EPROM address for the
        adapter is: D0000 - D7FFF.  The assignment for this EPROM
        address can be changed by selecting 'Change Configuration'
        and then using the F5=Previous and the F6=Next keys.
        The EPROM address selected must not be assigned for use by any
        other adapter or option.  If an assignment has an asterisk (*)
        by it, it is in conflict with another assignment and the EPROM
        address must be changed.  If a conflict continues to exist, you
        may have to change the assignments for other adapters or options
        that are in your computer to resolve the conflict."

NamedItem Prompt "Interrupt Level"

  Choice "Interrupt 2"
     POS[0]=00XXXXXXb
     INT 2d

  Choice "Interrupt 3"
     POS[0]=01XXXXXXb
     INT 3d

  Choice "Interrupt 10"
     POS[0]=10XXXXXXb
     INT 10d

  Choice "Interrupt 11"
     POS[0]=11XXXXXXb
     INT 11d

  Help "INTERRUPT LEVEL:  This Token-Ring Network adapter can operate
        on one of four interrupt levels: 2, 3, 10, or 11.  The preferred
        interrupt level is 2, but the adapter can operate on any of
        the four levels if necessary.  The assignment for this interrupt
        level can be changed by selecting 'Change Configuration' and
        then using the F5=Previous and the F6=Next keys."

NamedItem Prompt "Bus Master Arbitration Level"

  Choice "Level 8"
     POS[3]=XXXX1000b
     ARB 8

  Choice "Level 9"
     POS[3]=XXXX1001b
     ARB 9

  Choice "Level 10"
     POS[3]=XXXX1010b
     ARB 10

  Choice "Level 11"
     POS[3]=XXXX1011b
     ARB 11

  Choice "Level 12"
     POS[3]=XXXX1100b
     ARB 12

  Choice "Level 13"
     POS[3]=XXXX1101b
     ARB 13

  Choice "Level 14"
     POS[3]=XXXX1110b
     ARB 14

  Help "ARBITRATION LEVEL: The Bus Master Arbitration level need
        only be changed if it is in conflict with another adapter.
        Conflicting assignments are marked with an asterisk.
        Use the F5=Previous and the F6=Next keys to change
        arbitration level assignments if you are in the
        'Change configuration' window."