AdapterId 05028h

AdapterName "Emerald SCSI / Micro Channel(tm) Tape Adapter"   

NumBytes 2

NamedItem
        Prompt "Emerald SCSI Tape Adapter I/O Ports............"
      choice "300-304H"    pos[0]=XXXX011Xb  io 0300h-0304h
      choice "200-204H"    pos[0]=XXXX001Xb  io 0200h-0204h
      choice "210-214H"    pos[0]=XXXX010Xb  io 0210h-0214h
      choice "310-314H"    pos[0]=XXXX100Xb  io 0310h-0314h
      choice "330-334H"    pos[0]=XXXX101Xb  io 0330h-0334h
      choice "340-344H"    pos[0]=XXXX110Xb  io 0340h-0344h
      choice "350-354H"	   pos[0]=XXXX111Xb  io 0350h-0354h

  Help
 "Emerald SCSI Tape Adapter can be setup to function at any one 
  of seven I/O ports.  You may use (F5=Previous) and (F6=Next) to
  change this assignment.
  Please note the assignment in Change Configuration window (above).
  Conflicts with other adapters are marked with an asterisk (*) 
  which MUST be resolved in order to use the adapter."

NamedItem
        Prompt "Emerald SCSI Tape Adapter DMA Arbitration......"
      choice "Level_1"   pos[0]=0001XXXXb  arb  1
      choice "Level_2"   pos[0]=0010XXXXb  arb  2
      choice "Level_3"   pos[0]=0011XXXXb  arb  3
      choice "Level_5"   pos[0]=0101XXXXb  arb  5
      choice "Level_6"   pos[0]=0110XXXXb  arb  6
      choice "Level_7"   pos[0]=0111XXXXb  arb  7

  Help
 "Emerald SCSI Tape Adapter can be setup to function at any one of 
  six DMA arbitration levels.  You may use (F5=Previous) and 
  (F6=Next) to change this assignment.
  Please note the assignment in Change Configuration window (above).
  Conflicts with other adapters are marked with an asterisk (*) 
  which MUST be resolved in order to use the adapter."

NamedItem
        Prompt "Emerald SCSI Tape Adapter Interrupt (IRQ)......"
      choice "IRQ_3"   pos[3]=11000011b  int  3
      choice "IRQ_4"   pos[3]=11000100b  int  4
      choice "IRQ_5"   pos[3]=11000101b  int  5
      choice "IRQ_6"   pos[3]=11000110b  int  6
      choice "IRQ_7"   pos[3]=11000111b  int  7
      choice "IRQ_9"   pos[3]=11000010b  int  9
			     
  Help
 "Emerald SCSI Tape Adapter can be setup to function at any one of
  six Interrupt ReQuest lines.  You may use (F5=Previous) and 
  (F6=Next) to change this assignment.
  Please note the assignment in Change Configuration window (above).
  Conflicts with other adapters are marked with an asterisk (*) 
  which MUST be resolved in order to use the adapter."