AdapterID 05075h

AdapterName "PIICEON SCSP-10 (1-serial) Adapter (Rev B)"

NumBytes  2

NamedItem

       Prompt "SERIAL PORT is configured to:"

       choice "COM-2  IRQ-3"
               pos[0] = 10001011b
               pos[1] = 00000000b
               io 2F8h-2FFh  int 3

       choice "COM-2  IRQ-NONE"
               pos[0] = 10000011b
               pos[1] = 00000000b
               io 2F8h-2FFh

       choice "COM-1  IRQ-4"
               pos[0] = 10010001b
               pos[1] = 00000000b
               io 3F8h-3FFh int 4

       choice "COM-1  IRQ-NONE"
               pos[0] = 10000001b
               pos[1] = 00000000b
               io 3F8h-3FFh

       choice "COM-3  IRQ-3"
               pos[0] = 10001101b
               pos[1] = 00000000b
               io 3220h-3227h int 3

       choice "COM-3  IRQ-NONE"
               pos[0] = 10000101b
               pos[1] = 00000000b
               io 3220h-3227h

       choice "COM-4  IRQ-3"
               pos[0] = 10001111b
               pos[1] = 00000000b
               io 3228h-322Fh int 3

       choice "COM-4  IRQ-NONE"
               pos[0] = 10000111b
               pos[1] = 00000000b
               io 3228h-322Fh

       choice "COM-5  IRQ-3"
               pos[0] = 10001001b
               pos[1] = 00000001b
               io 4220h-4227h int 3

       choice "COM-5  IRQ-NONE"
               pos[0] = 10000001b
               pos[1] = 00000001b
               io 4220h-4227h

       choice "COM-6  IRQ-3"
               pos[0] = 10001011b
               pos[1] = 00000001b
               io 4228h-422Fh int 3

       choice "COM-6  IRQ-NONE"
               pos[0] = 10000011b
               pos[1] = 00000001b
               io 4228h-422Fh

       choice "COM-7  IRQ-3"
               pos[0] = 10001101b
               pos[1] = 00000001b
               io 5220h-5227h int 3

       choice "COM-7  IRQ-NONE"
               pos[0] = 10000101b
               pos[1] = 00000001b
               io 5220h-5227h

       choice "Disable SCSP-10 Card"
               pos[0] = 10000110b
               pos[1] = 00000001b


Help
    " COM implies Serial Port and IRQ implies interrupt used.
      Example:  COM-2  IRQ-3 .. If this choice is selected the
      serial port of the SCSP-10 adapter card will be
      configured for COM Port 2. Also, COM-2 will use interrupt 3.
      To change the selection use:  F5 = previous choice  F6 = next. "