AdapterID 05078h

AdapterName "AMS MULTI-IO-11 Adapter (Rev B)"

NumBytes  2

NamedItem

       Prompt "SERIAL PORT is configured to:"

       choice "COM-2  IRQ-3"
               pos[0] = X000101Xb
               io 2F8h-2FFh  int 3

       choice "COM-2  IRQ-NONE"
               pos[0] = X000001Xb
               io 2F8h-2FFh

       choice "COM-1  IRQ-4"
               pos[0] = X001000Xb
               io 3F8h-3FFh int 4

       choice "COM-1  IRQ-NONE"
               pos[0] = X000000Xb
               io 3F8h-3FFh

       choice "COM-3  IRQ-3"
               pos[0] = X000110Xb
               io 3220h-3227h int 3

       choice "COM-3  IRQ-NONE"
               pos[0] = X000010Xb
               io 3220h-3227h

       choice "COM-4  IRQ-3"
               pos[0] = X000111Xb
               io 3228h-322Fh int 3

       choice "COM-4  IRQ-NONE"
               pos[0] = X000011Xb
               io 3228h-322Fh

       choice "Setup for DISABLE"
               pos[0] = X100000Xb

Help
    " COM implies Serial Port and IRQ implies interrupt used.
      Example:  COM-2  IRQ-3 .. If this choice is selected the
      serial port of the MULTI-IO-11 adapter card will be
      configured for COM Port 2. Also, COM-2 will use interrupt 3.
      If the MULTI-IO-11 adapter card is going to be DISABLED, then
      the choice 'Setup for DISABLE' must be selected in order
      to avoid any conflicts. To change the selection use:  F5 =
      previous choice  F6 = next. "


NamedItem

       Prompt "PARALLEL PORT is configured to:"


       choice "LPT-2  IRQ-7"
               pos[0] = 1XXXXXXXb
               pos[1] = 00001001b
               io 378h-37Ah int 7

       choice "LPT-2  IRQ-5"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000101b
               io 378h-37Ah int 5

       choice "LPT-2  IRQ-NONE"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000001b
               io 378h-37Ah

       choice "LPT-1  IRQ-7"
               pos[0] = 1XXXXXXXb
               pos[1] = 00001000b
               io 3BCh-3BEh int 7

       choice "LPT-1  IRQ-5"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000100b
               io 3BCh-3BEh int 5

       choice "LPT-1  IRQ-NONE"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000000b
               io 3BCh-3BEh

       choice "LPT-3  IRQ-7"
               pos[0] = 1XXXXXXXb
               pos[1] = 00001010b
               io 278h-27Ah int 7

       choice "LPT-3  IRQ-5"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000110b
               io 278h-27Ah int 5

       choice "LPT-3  IRQ-NONE"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000010b
               io 278h-27Ah

       choice "LPT-4  IRQ-7"
               pos[0] = 1XXXXXXXb
               pos[1] = 00001011b
               io 1378h-137Ah int 7

       choice "LPT-4  IRQ-5"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000111b
               io 1378h-137Ah int 5

       choice "LPT-4  IRQ-NONE"
               pos[0] = 1XXXXXXXb
               pos[1] = 00000011b
               io 1378h-137Ah

       choice "LPT-2  IRQ-7 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00001001b
               io 378h-37Ah int 7

       choice "LPT-2  IRQ-5 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000101b
               io 378h-37Ah int 5

       choice "LPT-2  IRQ-NONE B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000001b
               io 378h-37Ah

       choice "LPT-1  IRQ-7 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00001000b
               io 3BCh-3BEh int 7

       choice "LPT-1  IRQ-5 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000100b
               io 3BCh-3BEh int 5

       choice "LPT-1  IRQ-NONE B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000000b
               io 3BCh-3BEh

       choice "LPT-3  IRQ-7 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00001010b
               io 278h-27Ah int 7

       choice "LPT-3  IRQ-5 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000110b
               io 278h-27Ah int 5

       choice "LPT-3  IRQ-NONE B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000010b
               io 278h-27Ah

       choice "LPT-4  IRQ-7 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00001011b
               io 1378h-137Ah int 7

       choice "LPT-4  IRQ-5 B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000111b
               io 1378h-137Ah int 5

       choice "LPT-4  IRQ-NONE B"
               pos[0] = 0XXXXXXXb
               pos[1] = 00000011b
               io 1378h-137Ah

       choice "Setup for DISABLE"
               pos[0] = 0XXXXXXXb
               pos[1] = 11100011b

Help
      " LPT implies Parallel Port and IRQ implies interrupt used.
        Example: LPT-2  IRQ-5  B.. If this choice is selected the
        parallel port of the MULTI-IO-11 adapter card will be
        configured for LPT port 2 using interrupt 5. If a 'B' is
        present at the end of the selection, like in the example,
        then the parallel port is configured for Bidirectional Mode
        (Extended Mode). Absence of the 'B' indicates that the
        parallel port is configured for output only. If the
        MULTI-IO-11 adapter card is going to be DISABLED, then
        the choice 'Setup for DISABLE' must be selected in order
        to avoid any conflicts. NOTE: If the Operating System you
        are using is OS/2 then it is required that all the parallel
        ports be configured to use IRQ-7. To change selection use:
        F5 = previous choice  F6 = next. "



NamedItem

       Prompt "MULTI-IO-11 Adapter is presently:"

       choice "ENABLED"
               pos[0] = XXXXXXX1b

       choice "DISABLED"
               pos[0] = XXXXXXX0b


Help
    " When the MULTI-IO-11 Adapter is ENABLED, all of its ports
      are active. When it is DISABLED, all of its ports are
      inactive. If the MULTI-IO-11 adapter card is going to be
      DISABLED, then both the SERIAL port and the PARALLEL port
      must be configured to the 'Setup for DISABLE' selection
      in order to avoid any conflicts. To change the selection
      use: F5 = previous choice F6 = next. "