AdapterID 0507Eh

AdapterName "PIICEON SCSP-20 (2-serial) Adapter (Rev B)"

NumBytes  2

NamedItem

       Prompt "SERIAL PORTS are configured to:"


       choice "COM-2,3  IRQ-3,3"
               pos[0] = 10101011b
               pos[1] = 00000000b
               io 2F8h-2FFh 3220h-3227h int 3

       choice "COM-2,3  IRQ-3,NONE"
               pos[0] = 10001011b
               pos[1] = 00000000b
               io 2F8h-2FFh 3220h-3227h int 3

       choice "COM-2,3  IRQ-NONE,3"
               pos[0] = 10100011b
               pos[1] = 00000000b
               io 2F8h-2FFh 3220h-3227h int 3

       choice "COM-2,3  IRQ-NONE,NONE"
               pos[0] = 10000011b
               pos[1] = 00000000b
               io 2F8h-2FFh 3220h-3227h

       choice "COM-1,2  IRQ-4,3"
               pos[0] = 10110001b
               pos[1] = 00000000b
               io 3F8h-3FFh 2F8h-2FFh int 4 3

       choice "COM-1,2  IRQ-4,NONE"
               pos[0] = 10010001b
               pos[1] = 00000000b
               io 3F8h-3FFh 2F8h-2FFh int 4

       choice "COM-1,2  IRQ-NONE,3"
               pos[0] = 10100001b
               pos[1] = 00000000b
               io 3F8h-3FFh 2F8h-2FFh int 3

       choice "COM-1,2  IRQ-NONE,NONE"
               pos[0] = 10000001b
               pos[1] = 00000000b
               io 3F8h-3FFh 2F8h-2FFh

       choice "COM-3,4  IRQ-3,3"
               pos[0] = 10101011b
               pos[1] = 00000010b
               io 3220h-3227h 3228h-322Fh int 3

       choice "COM-3,4  IRQ-3,NONE"
               pos[0] = 10001011b
               pos[1] = 00000010b
               io 3220h-3227h 3228h-322Fh int 3

       choice "COM-3,4  IRQ-NONE,3"
               pos[0] = 10100011b
               pos[1] = 00000010b
               io 3220h-3227h 3228h-322Fh int 3

       choice "COM-3,4  IRQ-NONE,NONE"
               pos[0] = 10000011b
               pos[1] = 00000010b
               io 3220h-3227h 3228h-322Fh

       choice "COM-4,5  IRQ-3,3"
               pos[0] = 10101001b
               pos[1] = 00000010b
               io 3228h-322Fh 4220h-4227h int 3

       choice "COM-4,5  IRQ-3,NONE"
               pos[0] = 10001001b
               pos[1] = 00000010b
               io 3228h-322Fh 4220h-4227h int 3

       choice "COM-4,5  IRQ-NONE,3"
               pos[0] = 10100001b
               pos[1] = 00000010b
               io 3228h-322Fh 4220h-4227h int 3

       choice "COM-4,5  IRQ-NONE,NONE"
               pos[0] = 10000001b
               pos[1] = 00000010b
               io 3228h-322Fh 4220h-4227h

       choice "COM-5,6  IRQ-3,3"
               pos[0] = 10101101b
               pos[1] = 00000010b
               io 4220h-4227h 4228h-422Fh int 3

       choice "COM-5,6  IRQ-3,NONE"
               pos[0] = 10001101b
               pos[1] = 00000010b
               io 4220h-4227h 4228h-422Fh int 3

       choice "COM-5,6  IRQ-NONE,3"
               pos[0] = 10100101b
               pos[1] = 00000010b
               io 4220h-4227h 4228h-422Fh int 3

       choice "COM-5,6  IRQ-NONE,NONE"
               pos[0] = 10000101b
               pos[1] = 00000010b
               io 4220h-4227h 4228h-422Fh

       choice "COM-7,8  IRQ-3,3"
               pos[0] = 10101111b
               pos[1] = 00000010b
               io 5220h-5227h 5228h-522Fh int 3

       choice "COM-7,8  IRQ-3,NONE"
               pos[0] = 10001111b
               pos[1] = 00000010b
               io 5220h-5227h 5228h-522Fh int 3

       choice "COM-7,8  IRQ-NONE,3"
               pos[0] = 10100111b
               pos[1] = 00000010b
               io 5220h-5227h 5228h-522Fh int 3

       choice "COM-7,8  IRQ-NONE,NONE"
               pos[0] = 10000111b
               pos[1] = 00000010b
               io 5220h-5227h 5228h-522Fh

       choice "Disable SCSP-20 Card"
               pos[0] = 10000110b
               pos[1] = 10000011b


Help
      " COM implies Serial Port, and IRQ implies interrupt used. Example:
        COM-2,3  IRQ-3,3 .. If this choice is selected the SCSP-20
        adapter card will be configured for COM Ports 2 & 3. Also, COM-2
        will use interrupt 3 and COM-3 will use interrupt 3. To change
        selection use:  F5 = previous choice  F6 = next. "