AdapterID 0507fh AdapterName "PIICEON SCSP-21 (2-serial, 1-parallel) Adapter (Rev B)" NumBytes 2 NamedItem Prompt "SERIAL PORTS are configured to:" choice "COM-2,3 IRQ-3,3" pos[0] = X010101Xb io 2F8h-2FFh 3220h-3227h int 3 choice "COM-2,3 IRQ-3,NONE" pos[0] = X000101Xb io 2F8h-2FFh 3220h-3227h int 3 choice "COM-2,3 IRQ-NONE,3" pos[0] = X010001Xb io 2F8h-2FFh 3220h-3227h int 3 choice "COM-2,3 IRQ-NONE,NONE" pos[0] = X000001Xb io 2F8h-2FFh 3220h-3227h choice "COM-1,2 IRQ-4,3" pos[0] = X011000Xb io 3F8h-3FFh 2F8h-2FFh int 4 3 choice "COM-1,2 IRQ-4,NONE" pos[0] = X001000Xb io 3F8h-3FFh 2F8h-2FFh int 4 choice "COM-1,2 IRQ-NONE,3" pos[0] = X010000Xb io 3F8h-3FFh 2F8h-2FFh int 3 choice "COM-1,2 IRQ-NONE,NONE" pos[0] = X000000Xb io 3F8h-3FFh 2F8h-2FFh choice "COM-3,4 IRQ-3,3" pos[0] = X010110Xb io 3220h-3227h 3228h-322Fh int 3 choice "COM-3,4 IRQ-3,NONE" pos[0] = X000110Xb io 3220h-3227h 3228h-322Fh int 3 choice "COM-3,4 IRQ-NONE,3" pos[0] = X010010Xb io 3220h-3227h 3228h-322Fh int 3 choice "COM-3,4 IRQ-NONE,NONE" pos[0] = X000010Xb io 3220h-3227h 3228h-322Fh choice "COM-NONE,5 IRQ-NONE,3" pos[0] = X010011Xb io 3228h-322Fh 4220h-4227h int 3 choice "COM-NONE,5 IRQ-NONE,NONE" pos[0] = X000011Xb io 3228h-322Fh 4220h-4227h int 3 Help " COM implies Serial Port, and IRQ implies interrupt used. Example: COM-2,3 IRQ-3,3 .. If this choice is selected the serial ports of the SCSP-21 adapter card will be configured for COM Ports 2 & 3. Also, COM-2 will use interrupt 3 and COM-3 will use interrupt 3. To change selection use: F5 = previous choice F6 = next. " NamedItem Prompt "PARALLEL PORT is configured to:" choice "LPT-2 IRQ-7" pos[0] = 1XXXXXXXb pos[1] = 00001001b io 378h-37Ah int 7 choice "LPT-2 IRQ-5" pos[0] = 1XXXXXXXb pos[1] = 00000101b io 378h-37Ah int 5 choice "LPT-2 IRQ-NONE" pos[0] = 1XXXXXXXb pos[1] = 00000001b io 378h-37Ah choice "LPT-1 IRQ-7" pos[0] = 1XXXXXXXb pos[1] = 00001000b io 3BCh-3BEh int 7 choice "LPT-1 IRQ-5" pos[0] = 1XXXXXXXb pos[1] = 00000100b io 3BCh-3BEh int 5 choice "LPT-1 IRQ-NONE" pos[0] = 1XXXXXXXb pos[1] = 00000000b io 3BCh-3BEh choice "LPT-3 IRQ-7" pos[0] = 1XXXXXXXb pos[1] = 00001010b io 278h-27Ah int 7 choice "LPT-3 IRQ-5" pos[0] = 1XXXXXXXb pos[1] = 00000110b io 278h-27Ah int 5 choice "LPT-3 IRQ-NONE" pos[0] = 1XXXXXXXb pos[1] = 00000010b io 278h-27Ah choice "LPT-4 IRQ-7" pos[0] = 1XXXXXXXb pos[1] = 00001011b io 1378h-137Ah int 7 choice "LPT-4 IRQ-5" pos[0] = 1XXXXXXXb pos[1] = 00000111b io 1378h-137Ah int 5 choice "LPT-4 IRQ-NONE" pos[0] = 1XXXXXXXb pos[1] = 00000011b io 1378h-137Ah choice "LPT-2 IRQ-7 B" pos[0] = 0XXXXXXXb pos[1] = 00001001b io 378h-37Ah int 7 choice "LPT-2 IRQ-5 B" pos[0] = 0XXXXXXXb pos[1] = 00000101b io 378h-37Ah int 5 choice "LPT-2 IRQ-NONE B" pos[0] = 0XXXXXXXb pos[1] = 00000001b io 378h-37Ah choice "LPT-1 IRQ-7 B" pos[0] = 0XXXXXXXb pos[1] = 00001000b io 3BCh-3BEh int 7 choice "LPT-1 IRQ-5 B" pos[0] = 0XXXXXXXb pos[1] = 00000100b io 3BCh-3BEh int 5 choice "LPT-1 IRQ-NONE B" pos[0] = 0XXXXXXXb pos[1] = 00000000b io 3BCh-3BEh choice "LPT-3 IRQ-7 B" pos[0] = 0XXXXXXXb pos[1] = 00001010b io 278h-27Ah int 7 choice "LPT-3 IRQ-5 B" pos[0] = 0XXXXXXXb pos[1] = 00000110b io 278h-27Ah int 5 choice "LPT-3 IRQ-NONE B" pos[0] = 0XXXXXXXb pos[1] = 00000010b io 278h-27Ah choice "LPT-4 IRQ-7 B" pos[0] = 0XXXXXXXb pos[1] = 00001011b io 1378h-137Ah int 7 choice "LPT-4 IRQ-5 B" pos[0] = 0XXXXXXXb pos[1] = 00000111b io 1378h-137Ah int 5 choice "LPT-4 IRQ-NONE B" pos[0] = 0XXXXXXXb pos[1] = 00000011b io 1378h-137Ah Help " LPT implies Parallel Port and IRQ implies interrupt used. Example: LPT-2 IRQ-5 B.. If this choice is selected the parallel port of the SCSP-21 adapter card will be configured for LPT port 2 using interrupt 5. If a 'B' is present at the end of the selection, like in the example, then the parallel port is configured for Bidirectional Mode (Extended Mode). Absence of the 'B' indicates that the parallel port is configured for output only. NOTE: If the Operating System you are using is OS/2 then it is required that all the parallel ports be configured to use IRQ-7. To change selection use: F5 = previous choice F6 = next. " NamedItem Prompt "SCSP-21 Adapter is presently:" choice "ENABLED" pos[0] = XXXXXXX1b choice "DISABLED" pos[0] = XXXXXXX0b Help " When the SCSP-21 Adapter is ENABLED, all of its ports are active. When it is DISABLED, all of its ports are inactive."