AdapterID 05086h

AdapterName  "Scan-Graphics Compression/Decompression Accelerator"

NumBytes 4

FixedResources
    pos[3]=110XXXXXb

NamedItem

Prompt	"Daughter Card ID"

Choice "Any"	   pos[2]=XXXXX000b
Choice "CF"	   pos[2]=XXXXX001b
Choice "ACES"	   pos[2]=XXXXX010b
Choice "Fujitsu"   pos[2]=XXXXX011b
Choice "Wicks"	   pos[2]=XXXXX100b

Help

"This value is used for machines with more than one scanner installed.
If you only have one scanner, choose 'Any'.  Otherwise you must select
a unique Daughter Card ID for each board installed."

NamedItem

Prompt	"I/O Address Range"

Choice	"7C00 - 7C1F " pos[1]=00000XXXb  io 07C00h-07C1Fh
Choice	"7C20 - 7C3F " pos[1]=00001XXXb  io 07C20h-07C3Fh
Choice	"7C40 - 7C5F " pos[1]=00010XXXb  io 07C40h-07C5Fh
Choice	"7C60 - 7C7F " pos[1]=00011XXXb  io 07C60h-07C7Fh
Choice	"7C80 - 7C9F " pos[1]=00100XXXb  io 07C80h-07C9Fh
Choice	"7CA0 - 7CBF " pos[1]=00101XXXb  io 07CA0h-07CBFh
Choice	"7CC0 - 7CDF " pos[1]=00110XXXb  io 07CC0h-07CDFh
Choice	"7CE0 - 7CFF " pos[1]=00111XXXb  io 07CE0h-07CFFh

Help

"Determines the range of I/O addresses used by the CDA board."
			
NamedItem

Prompt "Interrupt Level"

choice "Channel 9 "  pos[0]=10XXXXXXb  INT 9
choice "Channel 12 " pos[0]=11XXXXXXb  INT 12
choice "Channel 3 "  pos[0]=00XXXXXXb  INT 3
choice "Channel 7 "  pos[0]=01XXXXXXb  INT 7

Help

"Determines the interrupt level used by CDA.
This adapter's interrupt level can be shared with
another device.  You may be able to improve performance
by selecting a level that is not used by any other device."


nameditem

Prompt	"DMA Arbitration Level"

Choice  "Level 6" pos[3]=XXXX0110b arb 6
Choice  "Level 7" pos[3]=XXXX0111b arb 7
Choice  "Level 0" pos[3]=XXXX0000b arb 0
Choice  "Level 1" pos[3]=XXXX0001b arb 1
Choice  "Level 3" pos[3]=XXXX0011b arb 3
Choice  "Level 4" pos[3]=XXXX0100b arb 4
Choice  "Level 5" pos[3]=XXXX0101b arb 5

Help

"This selects the DMA channel the CDA will use to transfer data."


nameditem

Prompt	"Fairness On/Off"
Choice  "On  " pos[3]=XXX0XXXXb
Choice  "Off " pos[3]=XXX1XXXXb

Help

"Bus Arbitration Fairness.  This controls whether the adapter will
release control of the bus when it has been using it exclusively.
Under normal circumstances, select <On>."