AdapterID 05101h

AdapterName "PIICEON SCSP-01 (1-parallel) Adapter (Rev B)"

NumBytes  1


NamedItem

       Prompt "PARALLEL PORT is configured to:"

       choice "LPT-2  IRQ-7"
               pos[0] = 10110001b
               io 378h-37Ah int 7

       choice "LPT-2  IRQ-5"
               pos[0] = 10101001b
               io 378h-37Ah int 5

       choice "LPT-2  IRQ-NONE"
               pos[0] = 10100001b
               io 378h-37Ah

       choice "LPT-1  IRQ-7"
               pos[0] = 10010001b
               io 3BCh-3BEh int 7

       choice "LPT-1  IRQ-5"
               pos[0] = 10001001b
               io 3BCh-3BEh int 5

       choice "LPT-1  IRQ-NONE"
               pos[0] = 10000001b
               io 3BCh-3BEh

       choice "LPT-3  IRQ-7"
               pos[0] = 11010001b
               io 278h-27Ah int 7

       choice "LPT-3  IRQ-5"
               pos[0] = 11001001b
               io 278h-27Ah int 5

       choice "LPT-3  IRQ-NONE"
               pos[0] = 11000001b
               io 278h-27Ah

       choice "LPT-4  IRQ-7"
               pos[0] = 11110001b
               io 1378h-137Ah int 7

       choice "LPT-4  IRQ-5"
               pos[0] = 11101001b
               io 1378h-137Ah int 5

       choice "LPT-4  IRQ-NONE"
               pos[0] = 11100001b
               io 1378h-137Ah

       choice "LPT-2  IRQ-7 B"
               pos[0] = 00110001b
               io 378h-37Ah int 7

       choice "LPT-2  IRQ-5 B"
               pos[0] = 00101001b
               io 378h-37Ah int 5

       choice "LPT-2  IRQ-NONE B"
               pos[0] = 00100001b
               io 378h-37Ah

       choice "LPT-1  IRQ-7 B"
               pos[0] = 00010001b
               io 3BCh-3BEh int 7

       choice "LPT-1  IRQ-5 B"
               pos[0] = 00001001b
               io 3BCh-3BEh int 5

       choice "LPT-1  IRQ-NONE B"
               pos[0] = 00000001b
               io 3BCh-3BEh

       choice "LPT-3  IRQ-7 B"
               pos[0] = 01010001b
               io 278h-27Ah int 7

       choice "LPT-3  IRQ-5 B"
               pos[0] = 01001001b
               io 278h-27Ah int 5

       choice "LPT-3  IRQ-NONE B"
               pos[0] = 01000001b
               io 278h-27Ah

       choice "LPT-4  IRQ-7 B"
               pos[0] = 01110001b
               io 1378h-137Ah int 7

       choice "LPT-4  IRQ-5 B"
               pos[0] = 01101001b
               io 1378h-137Ah int 5

       choice "LPT-4  IRQ-NONE B"
               pos[0] = 01100001b
               io 1378h-137Ah

       choice "Disable MULTI-PARALLEL-1"
               pos[0] = 11100000b



Help
      " LPT implies Parallel Port and IRQ implies interrupt used.
        Example: LPT-2  IRQ-7  B.. If this choice is selected the
        SCSP-01 adapter card will be configured for LPT
        Port 2 using interrupt 7. If a 'B' is present at the end
        of the selection, like in the example, then the parallel
        port is configured for Bidirectional Mode (Extended Mode).
        Absence of the 'B' indicates that the parallel port is
        configured for output only. NOTE: If the Operating System
        you are using is OS/2 then it is required that all the
        parallel ports be configured to use IRQ-7. To change
        selection use:  F5 = previous choice  F6 = next. "