AdapterId 05130h

AdapterName "Tecmar HDE+ SCSI MCA Host Adapter"   

NumBytes 2

NamedItem
        Prompt "HDE+ Adapter I/O Address"
      choice "I/O 330"    pos[0]=XXXX011Xb  io 0330h-033Fh
      choice "I/O 300"    pos[0]=XXXX000Xb  io 0300h-030Fh
      choice "I/O 310"    pos[0]=XXXX001Xb  io 0310h-031Fh
      choice "I/O 320"    pos[0]=XXXX010Xb  io 0320h-032Fh
      choice "I/O 340"    pos[0]=XXXX100Xb  io 0340h-034Fh
      choice "I/O 350"    pos[0]=XXXX101Xb  io 0350h-035Fh
      choice "I/O 360"    pos[0]=XXXX110Xb  io 0360h-036Fh

   Help
      "This HDE+ Adapter can be assigned to any of seven (7) I/O locations. 
      Use the F5=Previous and the F6=Next keys to change this
      assignment in the 'Change configuration' window.  Conflicting
      assignments are marked with an asterisk and must be changed to
      use the adapter."

NamedItem
        Prompt "HDE+ Adapter DMA Cycle Type"
      choice "Synchronous Extended"    pos[0]=XXX1XXXXb 
      choice "Asynchronous Extended"   pos[0]=XXX0XXXXb  

   Help
      "The HDE+ Adapter can be used in any MCA machine.  However, some
      Olivetti MCA machines require asynchronous extended DMA cycles.
      To enable this feature, select 'Asynchronous Extended'.  For all
      other MCA machines, select 'Synchronous Extended'.  Use the
      F5=Previous and the F6=Next keys to change this assignment in the
      'Change configuration' window."

NamedItem
        Prompt "HDE+ Adapter Interrupt Used"
      choice "Int 11"   pos[1]=XXX0111Xb  int  11
      choice "Int  3"   pos[1]=XXX0000Xb  int  3
      choice "Int  4"   pos[1]=XXX0001Xb  int  4
      choice "Int  5"   pos[1]=XXX0010Xb  int  5
      choice "Int  6"   pos[1]=XXX1011Xb  int  6
      choice "Int  7"   pos[1]=XXX0100Xb  int  7
      choice "Int  9"   pos[1]=XXX0101Xb  int  9
      choice "Int 10"   pos[1]=XXX0110Xb  int  10
      choice "Int 12"   pos[1]=XXX1000Xb  int  12
      choice "Int 14"   pos[1]=XXX1001Xb  int  14
      choice "Int 15"   pos[1]=XXX0011Xb  int  15

			     
   Help
      "The HDE+ adapter can be assigned to any of the interrupts indicated. 
      This assignment need only be changed if you do not wish certain
      programs to share interrupts. Use the F5=Previous and the F6=Next keys
      to change interrupt assignments if you are in the
      'Change configuration' window.(Default Int_3)"

NamedItem
        Prompt "HDE+ Adapter DMA Arbitration Level Used"
      choice "Level 1"   pos[1]=001XXXX0b  arb  1
      choice "Level 2"   pos[1]=010XXXX0b  arb  2
      choice "Level 3"   pos[1]=011XXXX0b  arb  3
      choice "Level 5"   pos[1]=101XXXX0b  arb  5
      choice "Level 6"   pos[1]=110XXXX0b  arb  6
      choice "Level 7"   pos[1]=111XXXX0b  arb  7
      choice "Level 0"   pos[1]=000XXXX0b  arb  0
      choice "Level 4"   pos[1]=100XXXX0b  arb  4


  Help
      "This assignment need only be changed if it is in conflict
      with another assignment.  Conflicting assignments are marked
      with an asterisk.  Use the F5=Previous and the F6=Next keys
      to change arbitration level assignments if you are in the
      'Change configuration' window.
      (Default Level_5)"