AdapterId 5604h

AdapterName  "Cabletron Ethernet Board E3040"

NumBytes 4

nameditem
        Prompt  "Adapter I/O Location"
          Choice "Base 1300"
            pos[1]=XXXX0010b
            io 1300h-131fh

          Choice "Base 2300"
            pos[1]=XXXX0100b
            io 2300h-231fh

          Choice "Base 3300"
            pos[1]=XXXX0110b
            io 3300h-331fh

          Choice "Base 4300"
            pos[1]=XXXX1000b
            io 4300h-43ffh

          Choice "Base 5300"
            pos[1]=XXXX1010b
            io 5300h-53ffh

          Choice "Base 6300"
            pos[1]=XXXX1100b
            io 6300h-63ffh

          Choice "Base 7300"
            pos[1]=XXXX1110b
            io 7300h-73ffh

        Help
        "To configure this adapter you must choose the IO location the
         adapter will use for the NIC and the IO REGisters.
         Under normal circumstances, select <Base 1300>."


nameditem
        Prompt  "Adapter Memory Location"

          Choice "Segment C0000-C3FFF"
            pos[1]=0000XXXXb
            mem 0c0000h-0c3fffh

          Choice "Segment C4000-C7FFF"
            pos[1]=0001XXXXb
            mem 0c4000h-0c7fffh

          Choice "Segment C8000-CBFFF"
            pos[1]=0010XXXXb
            mem 0c8000h-0cbfffh

          Choice "Segment CC000-CFFFF"
            pos[1]=0011XXXXb
            mem 0cc000h-0cffffh

          Choice "Segment D0000-D3FFF"
            pos[1]=0100XXXXb
            mem 0d0000h-0d3fffh

          Choice "Segment D4000-D7FFF"
            pos[1]=0101XXXXb
            mem 0d4000h-0d7fffh

          Choice "Segment D8000-DBFFF"
            pos[1]=0110XXXXb
            mem 0d8000h-0dbfffh

          Choice "Segment DC000-DFFFF"
            pos[1]=0111XXXXb
            mem 0dc000h-0dffffh

        Help
        "This selects the location for the ring buffer memory (16K) on
         the network adapter card. Choose one of these locations to map
         this buffer into the system memory map. Under normal circumstances
	 select <C0000-C3FFF>."


nameditem
	Prompt  "Adapter Interrupt Level"
	  Choice "Interrupt 3"
	    pos[2]=00000000b
	    int 3

	  Choice "Interrupt 7"
	    pos[2]=00000001b
	    int 7

	  Choice "Interrupt 9"
	    pos[2]=00000010b
	    int 9

	  Choice "Interrupt 12"
	    pos[2]=00000011b
	    int 12

 	Help
	"This selects the appropriate interrupt level for the network
         adapter card. Choose one of these interrupt levels which
         complies with your system's current configuration. Under normal
	 circumstances select <3>"