AdapterId 5605h

AdapterName  "Cabletron Ethernet Board E3040-X"

NumBytes 4

nameditem
        Prompt  "Adapter I/O Location"

          Choice "Base 1300"
            pos[1]=XXXX0010b
            io 1300h-13ffh

          Choice "Base 2300"
            pos[1]=XXXX0100b
            io 2300h-23ffh

          Choice "Base 3300"
            pos[1]=XXXX0110b
            io 3300h-33ffh

          Choice "Base 4300"
            pos[1]=XXXX1000b
            io 4300h-43ffh

          Choice "Base 5300"
            pos[1]=XXXX1010b
            io 5300h-53ffh

          Choice "Base 6300"
            pos[1]=XXXX1100b
            io 6300h-63ffh

          Choice "Base 7300"
            pos[1]=XXXX1110b
            io 7300h-73ffh

        Help
        "To configure this adapter you must choose the IO location the
         adapter will use for the NIC and the IO REGisters.
         Under normal circumstances, select <Base 1300>."


nameditem
        Prompt  "Adapter Memory Location"
          Choice "Segment C0000-CFFFF"
            pos[1]=0000XXXXb
            mem 0c0000h-0cffffh

          Choice "Segment D0000-DFFFF"
            pos[1]=0100XXXXb
            mem 0d0000h-0dffffh

        Help
        "This selects the location for the ring buffer memory (64K) on
         the network adapter card. Choose one of these locations to map
         this buffer into the system memory map."

nameditem
	Prompt  "Adapter Interrupt Level"
	  Choice "Interrupt 3"
	    pos[2]=00000000b
	    int 3

	  Choice "Interrupt 7"
	    pos[2]=00000001b
	    int 7

	  Choice "Interrupt 9"
	    pos[2]=00000010b
	    int 9

	  Choice "Interrupt 12"
	    pos[2]=00000011b
	    int 12

 	Help
	"This selects the appropriate interrupt level for the network
         adapter card. Choose one of these interrupt levels which
         complies with your system's current configuration."