AdapterID       05802h
AdapterName     "Borsu SCSI Adapter"

NumBytes        2

NamedItem
        Prompt  "Adapter Memory Location"

        Choice  "ROM Disabled"
                pos[0] = XXXXX00Xb
        Choice  "Segment C800"
                pos[0] = XXXXX01Xb
                mem 0c8000h-0c8fffh
        Choice  "Segment D000"
                pos[0] = XXXXX10Xb
                mem 0d0000h-0d0fffh
        Choice  "Segment D800"
                pos[0] = XXXXX11Xb
                mem 0d8000h-0d8fffh

        Help
        "If you wish to boot your computer from a Borsu cartridge you
        must choose the memory location the adapter will use for its BIOS
        ROM.  There are three memory locations that can be selected. Under
        normal circumstances, select <Segment C800>.  If your computer has
        a hard disk or you do not wish to boot from a cartridge select
        <ROM Diasabled>."

NamedItem
        Prompt  "DMA Arbitration Level"

        Choice  "DMA Disabled"
                pos[0] = 1111XXXXb
        Choice  "ARB_LEVEL 5"
                pos[0] = 0101XXXXb
                arb 5
        Choice "ARB_LEVEL 6"
                pos[0] = 0110XXXXb
                arb 6
        Choice "ARB_LEVEL 7"
                pos[0] = 0111XXXXb
                arb 7
        Choice "ARB_LEVEL 8"
                pos[0] = 1000XXXXb
                arb 8
        Choice "ARB_LEVEL 9"
                pos[0] = 1001XXXXb
                arb 9
        Choice "ARB_LEVEL 10"
                pos[0] = 1010XXXXb
                arb 10
        Choice "ARB_LEVEL 11"
                pos[0] = 1011XXXXb
                arb 11
        Choice "ARB_LEVEL 12"
                pos[0] = 1100XXXXb
                arb 12
        Choice "ARB_LEVEL 13"
                pos[0] = 1101XXXXb
                arb 13
        Choice "ARB_LEVEL 14"
                pos[0] = 1110XXXXb
                arb 14
        Choice  "ARB_LEVEL 0"
                pos[0] = 0000XXXXb
                arb 0
        Choice  "ARB_LEVEL 1"
                pos[0] = 0001XXXXb
                arb 1
        Choice  "ARB_LEVEL 2"
                pos[0] = 0010XXXXb
                arb 2
        Choice  "ARB_LEVEL 3"
                pos[0] = 0011XXXXb
                arb 3
        Choice  "ARB_LEVEL 4"
                pos[0] = 0100XXXXb
                arb 4

        Help
        "This is the DMA channel the adapter will use to transfer data.
        Under normal circumstances, select <ARB_LEVEL 5>. This assignment
        need only be changed if it is in conflict with another adapter."

NamedItem
        Prompt  "Fairness On/Off"

        Choice  "On"
                pos[0] = XXXX1XXXb
        Choice  "Off"
                pos[0] = XXXX0XXXb

        Help
        "Bus arbitration fairness is only relevant if the adapter is
        using DMA.  It controls whether the adapter will release control
        of the Micro Channel when it has been using it exclusively. Under
        normal circumstances, select <On>."

NamedItem
        Prompt  "Interrupt Level"

        Choice  "Interrupt Disabled"
                pos[1] = XX000XXXb
        Choice  "INT_LEVEL 3"
                pos[1] = XX110XXXb
                int 3
        Choice  "INT_LEVEL 9"
                pos[1] = XX001XXXb
                int 9
        Choice  "INT_LEVEL 10"
                pos[1] = XX010XXXb
                int 10
        Choice  "INT_LEVEL 11"
                pos[1] = XX011XXXb
                int 11
        Choice  "INT_LEVEL 12"
                pos[1] = XX100XXXb
                int 12
        Choice  "INT_LEVEL 14"
                pos[1] = XX101XXXb
                int 14
        Choice  "INT_LEVEL 6"
                pos[1] = XX111XXXb
                int 6

        Help
        "This is the interrupt level used by the adapter. Under normal
        circumstances, select <INT_LEVEL 3>. This assignment need only
        be changed if it is in conflict with another adapter."

NamedItem
        Prompt  "I/O Base Address"

        Choice  "IO_BASE 0200h"
                pos[1] = XXXXX001b
                io  0200h - 0207h
        Choice  "IO_BASE 0240h"
                pos[1] = XXXXX010b
                io  0240h - 0247h
        Choice  "IO_BASE 0280h"
                pos[1] = XXXXX011b
                io  0280h - 0287h
        Choice  "IO_BASE 02C0h"
                pos[1] = XXXXX100b
                io  02c0h - 02c7h
        Choice  "IO_BASE 0300h"
                pos[1] = XXXXX101b
                io  0300h - 0307h
        Choice  "IO_BASE 0340h"
                pos[1] = XXXXX110b
                io  0340h - 0347h
        Choice  "IO_BASE 0380h"
                pos[1] = XXXXX111b
                io  0380h - 0387h
        Choice  "IO_BASE DISABLED"
                pos[1] = XXXXX000b

        Help
        "This is the base of the I/O address space used by the adapter.
        The adapter uses eight bytes of address space (i.e. base + seven bytes).
        Under normal circumstances, select <IO_BASE 200>. This assignment
        need only be changed if it is in conflict with another adapter."