AdapterID       05802h
AdapterName     "Borsu SCSI Adapter - Issue A/B"

NumBytes        2

NamedItem
        Prompt  "I/O Base Address"

        Choice  "IO_BASE 0200h"
                pos[1] = XXXXX001b
                io  0200h - 0207h
        Choice  "IO_BASE 0240h"
                pos[1] = XXXXX010b
                io  0240h - 0247h
        Choice  "IO_BASE 0280h"
                pos[1] = XXXXX011b
                io  0280h - 0287h
        Choice  "IO_BASE 02C0h"
                pos[1] = XXXXX100b
                io  02c0h - 02c7h
        Choice  "IO_BASE 0300h"
                pos[1] = XXXXX101b
                io  0300h - 0307h
        Choice  "IO_BASE 0340h"
                pos[1] = XXXXX110b
                io  0340h - 0347h
        Choice  "IO_BASE 0380h"
                pos[1] = XXXXX111b
                io  0380h - 0387h
        Choice  "IO_BASE DISABLED"
                pos[1] = XXXXX000b

        Help
        "This is the base of the I/O address space used by the adapter.
        The adapter uses eight bytes of address space (i.e. base + seven bytes).
        Under normal circumstances, select <IO_BASE 200>. This assignment
        need only be changed if it is in conflict with another adapter."

NamedItem
        Prompt  "Interrupt Level"

        Choice  "Interrupt Disabled"
                pos[1] = XX000XXXb
        Choice  "INT_LEVEL 3"
                pos[1] = XX110XXXb
                int 3
        Choice  "INT_LEVEL 9"
                pos[1] = XX001XXXb
                int 9
        Choice  "INT_LEVEL 10"
                pos[1] = XX010XXXb
                int 10
        Choice  "INT_LEVEL 11"
                pos[1] = XX011XXXb
                int 11
        Choice  "INT_LEVEL 12"
                pos[1] = XX100XXXb
                int 12
        Choice  "INT_LEVEL 14"
                pos[1] = XX101XXXb
                int 14
        Choice  "INT_LEVEL 6"
                pos[1] = XX111XXXb
                int 6

        Help
        "This is the interrupt level used by the adapter. Under normal
        circumstances interrupts are not used, so select <Interrupt Disabled>.
        If interrupts are required then select <INT_LEVEL 3>. This
        assignment need only be changed if it is in conflict with another
        adapter."

NamedItem
        Prompt  "DMA Arbitration Level"

        Choice  "DMA Disabled"
                pos[0] = X1111XXXb

; Note that Fairness On/Off is set to off - DMA not supported.

        Help
        "This version of the SCSI Adapter does not use DMA."


;NamedItem
;        Prompt  "Fairness On/Off"
;
;        Choice  "On"
;                pos[0] = XXXX1XXXb
;        Choice  "Off"
;                pos[0] = XXXX0XXXb
;
;        Help
;        "Bus arbitration fairness is only relevant if the adapter is
;        using DMA.  It controls whether the adapter will release control
;        of the Micro Channel when it has been using it exclusively. Under
;        normal circumstances, select <On>."


NamedItem
        Prompt  "Adapter Memory Location"

        Choice  "ROM Disabled"
                pos[0] = XXXXX00Xb

        Help
         "This version of the SCSI Adapter does not have a ROM."