AdapterID  5FE8H

AdapterName  "SP-1000 Parallel printer adapter"

NumBytes 1

FixedResources
    pos[0]=000XXXXXB

NamedItem

        Prompt  "Parallel port address"

          Choice "Printer 1"
            pos[0]=XXXXX01XB
            io 03BCH-03BFH

          Choice "Printer 2"
            pos[0]=XXXXX10XB
            io 0378H-037BH

          Choice "Printer 3"
            pos[0]=XXXXX11XB
            io 0278H-027BH

          Choice "Disabled"
            pos[0]=XXXXX00XB

Help
        "Select one of the 3 available addresses for the parallel
         printer port.  Address conflicts will be marked with an
         asterick and must be resolved before using the adapter."

NamedItem

        Prompt  "Parallel port interrupt"

          Choice "IRQ 7"
            pos[0]=XXX1XXXXB
            int 7

          Choice "IRQ 5"
            pos[0]=XXX0XXXXB
            int 5

Help
        "The parallel printer port may select interrupt level 5 or 7.
         Under normal circumstances, select IRQ 7."

NamedItem

        Prompt  "Parallel port extended mode"

          Choice "Disabled"
            pos[0]=XXXX0XXXB

          Choice "Enabled"
            pos[0]=XXXX1XXXB

Help
        "This selection will enable the printer port extended mode.
         When disabled, the port will behave as a parallel printer
         port.  When enabled, the port may be used for parallel
         bi-directional data transfer."