AdapterId 06157h

AdapterName "NOVELL REMOTE III ADAPTER"

NumBytes 2


NamedItem
        Prompt "I/O Space for Remote III"
      choice "220-22F  Primary    "    pos[0]=XXXX00XXb  io 0220h-022fh  
      choice "620-62F  Alternate 1"    pos[0]=XXXX01XXb  io 0620h-062fh
      choice "A20-A2F  Alternate 2"    pos[0]=XXXX10XXb  io 0a20h-0a2fh
      choice "E20-E2F  Alternate 3"    pos[0]=XXXX11XXb  io 0e20h-0e2fh
Help
"Use the F5=Previous and the F6=Next keys to change this
assignment in the 'Change configuration' window.  Conflicting
assignments are marked with an asterisk and must be changed to
use the adapter."

NamedItem
        Prompt "Interrupt Selected for Remote III"
      choice "Interrupt 2"   pos[0]=XX00XXXXb  int 2
      choice "Interrupt 3"   pos[0]=XX01XXXXb  int 3
      choice "Interrupt 4"   pos[0]=XX10XXXXb  int 4
      choice "Interrupt 7"   pos[0]=XX11XXXXb  int 7
Help
"This assignment need only be changed if it is in conflict
with another assignment.  Conflicting assignments are marked
with an asterisk.  Use the F5=Previous and the F6=Next keys
to change arbitration level assignments if you are in the
'Change configuration' window."

NamedItem
       	Prompt "Ram Position for Remote III"
      choice "D4000-D5FFF"  pos[1]=11010100b   mem 0d4000h-0d5fffh     
      choice "D6000-D7FFF"  pos[1]=11010110b   mem 0d6000h-0d7fffh     
      choice "D8000-D9FFF"  pos[1]=11011000b   mem 0d8000h-0d9fffh     
      choice "DA000-DBFFF"  pos[1]=11011010b   mem 0da000h-0dbfffh     
      choice "C4000-C5FFF"  pos[1]=11000100b   mem 0c4000h-0c5fffh     
      choice "C6000-C7FFF"  pos[1]=11000110b   mem 0c6000h-0c7fffh     
      choice "C8000-C9FFF"  pos[1]=11001000b   mem 0c8000h-0c9fffh     
      choice "CA000-CBFFF"  pos[1]=11001010b   mem 0ca000h-0cbfffh     
      choice "CC000-CDFFF"  pos[1]=11001100b   mem 0cc000h-0cdfffh     
      choice "CE000-CFFFF"  pos[1]=11001110b   mem 0ce000h-0cffffh     
Help
	"To configure this adapter you must choose :
           1. Interrupt level.
           2. RAM position.
           3. IO space the adapter will use for it's control register. 
              There are four IO	spaces that can be selected. Under normal
              circumstances, select <220-22F>. Make sure that the IO space
              selected here matches the Profile's Adapter Type selected in
              the configuration program CSCON: Primary uses IO Space 220,
              Alternate 1 uses IO Space 620, Alternate 2 uses IO Space A20,
              Alternate 3 uses IO Space E20."