AdapterId  06162h

AdapterName "COMTROL HOSTESS 550/MC Sixteen Port Serial Adapter"

Numbytes 3

NamedItem

Prompt "Address Range"
choice "Base 200h-27Fh"    pos[0]=XXXXXXXXb pos[2]=00000100b io 0200h-027fh
choice "Base 500h-57Fh"    pos[0]=XXXXXXXXb pos[2]=00001010b io 0500h-057Fh
choice "Base 580h-5FFh"    pos[0]=XXXXXXXXb pos[2]=00001011b io 0580h-05FFh
choice "Base 600h-67Fh"    pos[0]=XXXXXXXXb pos[2]=00001100b io 0600h-067Fh
choice "Base 700h-77Fh"    pos[0]=XXXXXXXXb pos[2]=00001110b io 0700h-077Fh
choice "Base 780h-7FFh"    pos[0]=XXXXXXXXb pos[2]=00001111b io 0780h-07FFh


Help
"This table provides the more commonly used choices for the HOSTESS/MC
adapter board.  If the list does not include the selection for your
application, you may contact Comtrol Corporation at 1-800-926-6876 for
additional information. The assignment need only be changed if it is in
conflict with another assignment. Conflicting assignments are marked
with an asterisk, and must be changed. Use the F5=Previous and the
F6=Next keys to change assignments."

NamedItem

Prompt "Interrupt"
choice "IRQ3"            pos[0]=X01XXXXXb int 3
choice "IRQ5"            pos[0]=X11XXXXXb int 5
choice "IRQ10"           pos[0]=X10XXXXXb int 10
choice "IRQ11"           pos[0]=X00XXXXXb int 11

Help
"This table provides the choice of one of four interrupt levels."

NamedItem

Prompt "Interrupt Enable"
choice "On"             pos[0]=0XXXXXXXb
choice "Off"            pos[0]=1XXXXXXXb

Help
"This selection enables interrupts when ON, and disables interrupts when OFF.
ON must be selected if HOSTBUFFER DOS driver is used, and also ON must
be selected if a Xenix device driver is to be used."