AdapterId 06213h
;		    Copyright (c) 1991,1992
;		    Custom Computer Systems
;		    Northboro, MA 01532
;		    ALL RIGHTS RESERVED
;
;		    ADF FILE HISTORY
;		    @6213.ADF REV E1  1st release
;		    @6213.ADF REV 2.1 CO-RESIDENT SUPPORT
;		    	
AdapterName  "Custom Computer Systems IDE Fixed Disk Adapter C1000 rev 2.1"

NumBytes 3

NamedItem
	Prompt "I/O Options"
	choice "Primary 11f0h-11f7h"   pos[0]=0XXXXXXXb  io 11f0h-11f7h
	choice "Secondary 1170h-117fh" pos[0]=1XXXXXXXb  io 1170h-117fh
Help
"These are the primary and secondary I/O
selections assigned to the C1000 IDE disk
controller.  Use the F5=Previous and the
F6=Next keys to change assignments if you
are in the 'Change configuration' window.
Conflicting assignments are marked with
an asterisk and must be changed to use
the adapter."

NamedItem
	Prompt "ROM Address"
	choice "Segment DC00"  pos[0]=X1111XXXb mem 0DC000h-0DFFFFh
	choice "Segment D800"  pos[0]=X1101XXXb mem 0D8000h-0DBFFFh
	choice "Segment D400"  pos[0]=X1011XXXb mem 0D4000h-0D7FFFh
	choice "Segment D000"  pos[0]=X1001XXXb mem 0D0000h-0D3FFFh
	choice "Segment CC00"  pos[0]=X0111XXXb mem 0CC000h-0CFFFFh
	choice "Segment C800"  pos[0]=X0101XXXb mem 0C8000h-0CBFFFh
Help
"These are the boot ROM addresses assigned
to the C1000 IDE disk controller.  Use the
F5=Previous and the F6=Next keys to change
ROM address assignments if you are in the
'Change configuration' window. Conflicting
assignments are marked with an asterisk and
must be changed to use the adapter."


NamedItem
	Prompt "Interrupt Selection"
	choice "IRQ10"	pos[1]=XX001001b int 0ah
	choice "IRQ15"	pos[1]=XX001011b int 0fh
Help
"These are the Interrupt selections
assigned to the C1000 IDE disk controller.
Use the F5=Previous and the F6=Next keys
to change assignments if you are in the
'Change configuration' window. Conflicting
assignments are marked with an asterisk and
must be changed to use the adapter."



NamedItem
	Prompt "CO-RESIDENT Installation"
	choice "NO"	pos[2]=00XXXXXXb
	choice "YES"	pos[2]=01XXXXXXb

Help
"Select the co-resident mode assigned to
the C1000 IDE disk controller.
Use the F5=Previous and the F6=Next keys
to change assignments if you are in the
'Change configuration' window." 


NamedItem
	Prompt "Drive 0 Disk Type Selection"
	choice "Identify and translate" pos[2]=XXXX0001b
	choice "Identify and truncate"	pos[2]=XXXX0010b
	choice "Not Installed"		pos[2]=XXXX0000b


Help
"These are the disk type selections that
maybe assigned to drive 0 on the C1000 IDE
disk controller. Use the F5=Previous and
the F6=Next keys to change assignments if
you are in the 'Change configuration' window.
When the self-identify parameter feature
is enabled the C1000 IDE disk controller
retrieves the disk drive parameters directly
from the hard disk drive."

NamedItem
	Prompt "Drive 1 Disk Type Selection"

	choice "Not Installed"		pos[2]=XX00XXXXb
	choice "Identify and translate" pos[2]=XX01XXXXb
	choice "Identify and truncate"	pos[2]=XX10XXXXb

Help
"These are the disk type selections that
maybe assigned to drive 1 on the C1000 IDE
disk controller. Use the F5=Previous and
the F6=Next keys to change assignments if
you are in the 'Change configuration' window.
When the Automatic Drive parameter feature
is enabled the C1000 IDE disk controller
retrieves the disk drive parameters directly
from the hard disk drive."