AdapterID 062a9h

ADAPTERNAME  "NCR Recognition Accelerator Board 10MB (ID 0x62a9)"

NUMBYTES 4

FIXEDRESOURCES  pos[0]=1110XXX1b pos[1]=00000000b
                pos[2]=XXXXXXXXb pos[3]=11110XXXb

NAMEDITEM
    PROMPT    "Co-Processor Addressing Mode"
    CHOICE  "Big Endian (Byte 0 is bits 31..24)"
        pos[0]=XXXX111Xb
    CHOICE  "Little Endian (Byte 0 is bits 7..0)"
        pos[0]=XXXX000Xb
    HELP
       "This item sets Co-Processor Addressing mode"

NAMEDITEM
    PROMPT    "I/O Block Address"
    CHOICE  "0x1000 - 0x1107"
        pos[2]=X1XXX000b  IO 1000h-1107h
    CHOICE  "0x2000 - 0x2107"
        pos[2]=X1XXX001b  IO 2000h-2107h
    CHOICE  "0x3000 - 0x3107"
        pos[2]=X1XXX010b  IO 3000h-3107h
    CHOICE  "0x4000 - 0x4107"
        pos[2]=X1XXX011b  IO 4000h-4107h
    CHOICE  "0x5000 - 0x5107"
        pos[2]=X1XXX100b  IO 5000h-5107h
    CHOICE  "0x6000 - 0x6107"
        pos[2]=X1XXX101b  IO 6000h-6107h
    CHOICE  "0x7000 - 0x7107"
        pos[2]=X1XXX110b  IO 7000h-7107h
    CHOICE  "0x8000 - 0x8107"
        pos[2]=X1XXX111b  IO 8000h-8107h
    CHOICE  "DISABLE"
        pos[2]=X0XXXXXXb
    HELP
       "This item sets the I/O address to which the board responds"

NAMEDITEM 
    PROMPT    "Memory Block Address"
    CHOICE  "DISABLE"
        pos[2]=0XXXXXXXb
    CHOICE  "0x000C0000 - 0x000C1FFF"
        pos[2]=1X000XXXb  MEM 00C0000h - 00C1FFFh
    CHOICE  "0x000C2000 - 0x000C3FFF"
        pos[2]=1X001XXXb  MEM 00C2000h - 00C3FFFh
    CHOICE  "0x000C4000 - 0x000C5FFF"
        pos[2]=1X010XXXb  MEM 00C4000h - 00C5FFFh
    CHOICE  "0x000C6000 - 0x000C7FFF"
        pos[2]=1X011XXXb  MEM 00C6000h - 00C7FFFh
    CHOICE  "0x000D8000 - 0x000D9FFF"
        pos[2]=1X100XXXb  MEM 00D8000h - 00D9FFFh
    CHOICE  "0x000DA000 - 0x000DBFFF"
        pos[2]=1X101XXXb  MEM 00DA000h - 00DBFFFh
    CHOICE  "0x000DC000 - 0x000DDFFF"
        pos[2]=1X110XXXb  MEM 00DC000h - 00DDFFFh
    CHOICE  "0x000DE000 - 0x000DFFFF"
        pos[2]=1X111XXXb  MEM 00DE000h - 00DFFFFh
    HELP
       "This item sets the Memory address to which the board responds"

NAMEDITEM
    PROMPT    "Hardware Interrupt Select"
    CHOICE  "15"
        pos[3]=XXXXX111b  INT 15
    CHOICE  "12"
        pos[3]=XXXXX101b  INT 12
    CHOICE  "5"
        pos[3]=XXXXX000b  INT 5
    CHOICE  "6"
        pos[3]=XXXXX001b  INT 6
    CHOICE  "7"
        pos[3]=XXXXX010b  INT 7
    CHOICE  "10"
        pos[3]=XXXXX011b  INT 10
    CHOICE  "11"
        pos[3]=XXXXX100b  INT 11
    CHOICE  "14"
        pos[3]=XXXXX110b  INT 14
    HELP
       "This item sets the Hardware Interrupt used by the board"