AdapterId 0677Fh

AdapterName "ATTACHMATE - Advanced 3270 Adapter/2"

NumBytes 3

NamedItem
	Prompt "IBM I/O Address Range"
		choice "Standard: 02D0-02DF"  pos[1]=xxxxx100b io 02D0h-02DFh int 2
		choice "Alternate: 06D0-06DF" pos[1]=xxxxx101b io 06D0h-06DFh int 2
		choice "Alternate: 0AD0-0ADF" pos[1]=xxxxx110b io 0AD0h-0ADFh int 2
		choice "Alternate: 0ED0-0EDF" pos[1]=xxxxx111b io 0ED0h-0EDFh int 2
		choice "Disabled"      pos[1]=xxxxx000b
	Help
	"Choose an appropriate IBM compatible I/O register range or choose 
         `Disabled' to inhibit the IBM register set."

NamedItem
	Prompt "IBM Memory Address Range"
		choice "Standard: 0CE000-0CFFFF"  pos[2]=xxx01110b mem 0CE000h-0CFFFFh
		choice "Alternate: 0C0000-0C1FFF" pos[2]=xxx00000b mem 0C0000h-0C1FFFh
		choice "Alternate: 0C2000-0C3FFF" pos[2]=xxx00010b mem 0C2000h-0C3FFFh
		choice "Alternate: 0C4000-0C5FFF" pos[2]=xxx00100b mem 0C4000h-0C5FFFh
		choice "Alternate: 0C6000-0C7FFF" pos[2]=xxx00110b mem 0C6000h-0C7FFFh
		choice "Alternate: 0C8000-0C9FFF" pos[2]=xxx01000b mem 0C8000h-0C9FFFh
		choice "Alternate: 0CA000-0CBFFF" pos[2]=xxx01010b mem 0CA000h-0CBFFFh
		choice "Alternate: 0CC000-0CDFFF" pos[2]=xxx01100b mem 0CC000h-0CDFFFh
		choice "Alternate: 0D0000-0D1FFF" pos[2]=xxx10000b mem 0D0000h-0D1FFFh
		choice "Alternate: 0D2000-0D3FFF" pos[2]=xxx10010b mem 0D2000h-0D3FFFh
		choice "Alternate: 0D4000-0D5FFF" pos[2]=xxx10100b mem 0D4000h-0D5FFFh
		choice "Alternate: 0D6000-0D7FFF" pos[2]=xxx10110b mem 0D6000h-0D7FFFh
		choice "Alternate: 0D8000-0D9FFF" pos[2]=xxx11000b mem 0D8000h-0D9FFFh
		choice "Alternate: 0DA000-0DBFFF" pos[2]=xxx11010b mem 0DA000h-0DBFFFh
		choice "Alternate: 0DC000-0DDFFF" pos[2]=xxx11100b mem 0DC000h-0DDFFFh
		choice "Alternate: 0DE000-0DFFFF" pos[2]=xxx11110b mem 0DE000h-0DFFFFh
		choice "Disabled"         pos[2]=xxx00001b
	Help
	"Choose an appropriate IBM compatible memory address range or choose 
         `Disabled' to inhibit the IBM Memory."

NamedItem
	Prompt "IRMA I/O Address Range"
		choice "Standard: 0220-0227"  pos[1]=00011xxxb io 0220h-0227h
		choice "Alternate: 0280-0287" pos[1]=01001xxxb io 0280h-0287h
		choice "Alternate: 02C0-02C7" pos[1]=01101xxxb io 02C0h-02C7h
		choice "Alternate: 0300-0307" pos[1]=10001xxxb io 0300h-0307h
		choice "Disabled"       pos[1]=00000xxxb
	Help
	"Choose an appropriate IRMA compatible I/O register range or choose 
         `Disabled' to inhibit the IRMA register set."

NamedItem
	Prompt "Terminal ID/Model Number"
		choice "Model 2" pos[2]=00xxxxxxb
		choice "Model 3" pos[2]=01xxxxxxb
		choice "Model 4" pos[2]=10xxxxxxb
		choice "Model 5" pos[2]=11xxxxxxb
	Help
	"Choose a default Terminal Model number to be emulated at power-on
	time.  This setting can be overridden by your operating software."

NamedItem
	Prompt "Communications Enabled/Disabled"
		choice "Disabled" pos[2]=xx0xxxxxb
		choice "Enabled"  pos[2]=xx1xxxxxb
	Help
	"This selection determines the state of controller communications at
	power-up time.  It must be Disabled for DFT to work properly.  It may
	be enabled to allow CUT emulation immediately at power-up time."