AdapterID 06BF3h


AdapterName "ACF REINSA OMNILINK 232/C REINSB"

NumBytes  1

NamedItem

Prompt " Serial port selection "

choice "SERIAL_2  SERIAL_3" pos[0] = xxxx001xb io 2F8h-2FFh 3220h-3227h   int 3 3
choice "SERIAL_3  SERIAL_4" pos[0] = xxxx010xb io 3220h-322fh             int 3 3
choice "SERIAL_4  SERIAL_5" pos[0] = xxxx011xb io 3228h-322fh 4220h-4227h int 3 3
choice "SERIAL_5  SERIAL_6" pos[0] = xxxx100xb io 4220h-422fh             int 3 3
choice "SERIAL_6  SERIAL_7" pos[0] = xxxx101xb io 4228h-422fh 5220h-5227h int 3 3
choice "SERIAL_7  SERIAL_8" pos[0] = xxxx110xb io 5220h-522fh             int 3 3
choice "SERIAL_8   -------" pos[0] = xxxx111xb io 5228h-522fh             int 3 3
choice "SERIAL_1  SERIAL_2" pos[0] = xxxx000xb io 3f8h-3ffh 2f8h-2ffh     int 4 3

Help
"The OMNILINK 232/C is equiped whit two serial ports.
Configurable as SERIAL_1 through
SERIAL_8. I/O port is a follow:
SERIAL_1 Address 3F8 (SYSTEM SERIAL PORT),
SERIAL_2 Address 2F8,SERIAL_3 Address 3220,SERIAL_4 Address 3228,SERIAL_5
Address 4220,SERIAL_6 Address 4228,SERIAL_7 Address 5220,SERIAL_8 Address 5228.
Automatic configuration is SERIAL_2 SERIAL_3 .
The conflictive or uncorrected selections  are marked with
 - * -. In this case, change the used selection.
In the window of the change of configuartion select
    F5 = select previous  F6 = select posterior "