AdapterID 06BF5h

AdapterName "ACF REINSA OMNILINK 1 serial 1 parallel ports"

NumBytes  1

NamedItem

Prompt " Serial port selection"

choice "SERIAL_2 "   pos[0] = xxxx001xb  io 2F8h-2FFh   int 3
choice "SERIAL_3 "   pos[0] = xxxx010xb  io 3220h-3227h int 3
choice "SERIAL_4 "   pos[0] = xxxx011xb  io 3228h-322Fh int 3
choice "SERIAL_5 "   pos[0] = xxxx100xb  io 4220h-4227h int 3
choice "SERIAL_6 "   pos[0] = xxxx101xb  io 4228h-422Fh int 3
choice "SERIAL_7 "   pos[0] = xxxx110xb  io 5220h-5227h int 3
choice "SERIAL_8 "   pos[0] = xxxx111xb  io 5228h-522Fh int 3
choice "SERIAL_1 "   pos[0] = xxxx000xb  io 3F8h-3FFh   int 4

Help
"The OMNILINK REINSPB is equiped whit one serial port
and one parallel port.
The serial port is configurable
as SERIAL_1 through SERIAL_8. I/O port for serial port is a follow
SERIAL_1 Address 3F8 (SYSTEM SERIAL PORT),
SERIAL_2 Address 2F8,SERIAL_3 Address 3220,SERIAL_4 Address 3228,SERIAL_5
Address 4220,SERIAL_6 Address 4228,SERIAL_7 Address 5220,SERIAL_8 Address 5228.
I/O port for parallel port is a follow
PARALELO_1 Address 3BC (SYSTEM PARALLEL PORT), PARALELO_2 Address 378,
PARALELO_3 Address 278.
Automatic configuration is SERIAL_2 PARALLEL_2 ."

NamedItem

Prompt " Parallel port selection "

choice "PARALEL_2 "   pos[0] = xx00xxxxb  io 378h-37Fh int 5
choice "PARALEL_3 "   pos[0] = xx01xxxxb  io 278h-27Fh int 5
choice "PARALEL_1 "   pos[0] = xx10xxxxb  io 3BCh-3BFh int 7
choice " DISABLE  "   pos[0] = xx11xxxxb

Help
"I/O port for parallel port is a follow
PARALELO_1: Address 3BC (SYSTEM PARALLEL PORT), PARALELO_2: Address 378,
PARALELO_3: Address 278.
Automatic configuration is SERIAL_2: PARALLELO_2: ."