AdapterId 06EF0h

AdapterName  "10NET/STARLAN LAN Adapter"

NumBytes 2

Fixedresources
	pos[0]=00xxxxxxb
	pos[1]=00x1xxxxb

Nameditem
   Prompt "I/O Port Address"
      choice "Port 0300-030Fh"  pos[0]=xxxxx11xb  io 0300h-030Fh
      choice "Port 0310-031Fh"  pos[0]=xxxxx10xb  io 0310h-031Fh
      choice "Port 0B00-0B0Fh"  pos[0]=xxxxx01xb  io 0B00h-0B0Fh
      choice "Port 0B10-0B1Fh"  pos[0]=xxxxx00xb  io 0B10h-0B1Fh
   Help
     "This selects the I/O Port range the 10NET/STARLAN LAN adapter 
      will use.  If an asterisk (*) appears, a conflict is indicated,
      and you must select a different address.  Use the F5=Previous 
      or the F6=Next keys to change the I/O port assignment if you 
      are in the 'Change configuration' window."

NamedItem
   Prompt "Interrupt Request Line"
      choice "IRQ 3"   pos[0]=xx001xxxb  int 3
      choice "IRQ 5"   pos[0]=xx010xxxb  int 5
      choice "IRQ 9"   pos[0]=xx011xxxb  int 9
      choice "IRQ 10"  pos[0]=xx100xxxb  int 10
      choice "IRQ 11"  pos[0]=xx101xxxb  int 11
      choice "IRQ 12"  pos[0]=xx110xxxb  int 12
      choice "IRQ 15"  pos[0]=xx111xxxb  int 15
   Help
      "This selects the Interrupt Request line the 10NET/STARLAN
       LAN Adapter will use to request CPU attention."

NamedItem
   Prompt "DMA Channel"
      choice "Channel 1"  pos[1]=xxxx0001b  arb 1
      choice "Channel 0"  pos[1]=xxxx0000b  arb 0
      choice "Channel 3"  pos[1]=xxxx0011b  arb 3
      choice "Channel 4"  pos[1]=xxxx0100b  arb 4
      choice "Channel 5"  pos[1]=xxxx0101b  arb 5
      choice "Channel 6"  pos[1]=xxxx0110b  arb 6
      choice "Channel 7"  pos[1]=xxxx0111b  arb 7
   Help
     "This selects the DMA channel the adapter will use to transfer
      data.  If an asterisk (*) appears, a conflict is indicated,
      and you must select a different address.  Use the F5=Previous 
      or the F6=Next keys to change the DMA channel assignment if you 
      are in the 'Change configuration' window."