AdapterId  777Dh

AdapterName  "Elite 16/2-386 Memory Expansion Adapter"

NumBytes 2

FixedResources	pos[3]=11XXXXXXb

NamedItem
Prompt  "Adapter ROM Memory Location"

Choice  "Segment C800    "    pos[0]=XX01000Xb   mem 0c8000h - 0c9fffh
Choice  "Segment CA00    "    pos[0]=XX01001Xb   mem 0ca000h - 0cbfffh
Choice  "Segment CC00    "    pos[0]=XX01010Xb   mem 0cc000h - 0cdfffh
Choice  "Segment CE00    "    pos[0]=XX01011Xb   mem 0ce000h - 0cffffh
Choice  "Segment D800    "    pos[0]=XX01100Xb   mem 0d8000h - 0d9fffh
Choice  "Segment DA00    "    pos[0]=XX01101Xb   mem 0da000h - 0dbfffh
Choice  "Segment DC00    "    pos[0]=XX01110Xb   mem 0dc000h - 0ddfffh
Choice  "Segment DE00    "    pos[0]=XX01111Xb   mem 0de000h - 0dffffh
Choice  "ROM Disabled    "    pos[0]=XX00XXXXb

        Help
        "Choose the memory location the adapter will use for its BIOS ROM.
	 There are eight memory locations to choose from.  The default
	 selection is 'Segment C800'.  If more than one Elite 16/2-386
	 is installed in the system, the ROM should be disabled on all the
	 adapters except one."

NamedItem
Prompt  "Adapter ROM Type Selection"

Choice  "Fixed ROM       "    pos[0]=X1XXXXXXb
Choice  "Programmable ROM"    pos[0]=X0XXXXXXb

        Help
        "Choose the type of ROM installed.  If your adapter has the standard
	 fixed ROM (EPROM), then use the default selection, 'Fixed ROM'.
	 If the optional user programmable ROM (EEPROM) is installed, then
	 select 'Programmable ROM'."

NamedItem
Prompt  "Memory Wait State Selection"

Choice  "0 Wait States   "    pos[0]=0XXXXXXXb
Choice  "1 Wait State    "    pos[0]=1XXXXXXXb

        Help
        "Choose the number of memory wait states based on the type of memory
	 installed.  If your adapter contains standard 80ns (-8) memory
	 modules, or 100ns (-10) modules in a 16MHz system, then use the
	 default, '0 Wait States'.  Otherwise select '1 Wait State'."

NamedItem
Prompt  "Memory Parity Checking"
			 
Choice  "Parity Enabled  "    pos[3]=XXX1XXXXb
Choice  "Parity Disabled "    pos[3]=XXX0XXXXb

        Help
        "Parity checking is normally enabled (default).  Disabling is provided
	 for diagnostic purposes."  

NamedItem
Prompt  "HyperCache Enable/Disable"

Choice  "Cache Enabled   "    pos[3]=XX1XXXXXb
Choice  "Cache Disabled  "    pos[3]=XX0XXXXXb

        Help
        "The HyperCACHE option, if installed, is normally enabled (default).
	 Disabling is provided for diagnostic purposes.  If the HyperCACHE
	 option is not installed, this item is ignored."